Bug 65098

Summary: CardBus serial port on Xircom RBEM56G-100 won't work
Product: Base System Reporter: Kevin Oberman <oberman>
Component: kernAssignee: freebsd-bugs (Nobody) <bugs>
Status: Closed FIXED    
Severity: Affects Only Me    
Priority: Normal    
Version: 5.2-CURRENT   
Hardware: Any   
OS: Any   

Description Kevin Oberman 2004-04-02 23:00:36 UTC 
	Insert Xircom RBEM56G-100. Ethernet is properly initialized,
but the serial (modem) port fails due to irq problems.

Here is the verbose dmesg:

acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.0
\\_SB_.LNKD irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.1
\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.2
\\_SB_.LNKH irq   0: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.3
\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.31.0
\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.31.1
---- before setting priority for links ------------
\\_SB_.LNKH:
	interrupts:	     3     4     5     6     7     9    10    11
	penalty:	  1110  1110   110  1110  1110   110   110   610
	references:	1
	priority:	0
---- before fixup boot-disabled links -------------
\\_SB_.LNKH:
	interrupts:	     3     4     5     6     7     9    10    11
	penalty:	  1110  1110   110  1110  1110   110   110   610
	references:	1
	priority:	672
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.0
\\_SB_.LNKD irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.1
\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.2
\\_SB_.LNKH irq  10: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.3
\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.31.0
\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.31.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base e0000000, size 26, enabled
found->	vendor=0x8086, dev=0x1a30, revid=0x04
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x1a31, revid=0x04
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 00001800, size  5, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.LNKA)
pcib0: slot 29 INTA is routed to irq 11
found->	vendor=0x8086, dev=0x2482, revid=0x02
	bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[20]: type 4, range 32, base 00001820, size  5, enabled
pcib0: matched entry for 0.29.INTB (src \\_SB_.LNKD)
pcib0: slot 29 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x2484, revid=0x02
	bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type 4, range 32, base 00001840, size  5, enabled
pcib0: matched entry for 0.29.INTC (src \\_SB_.LNKC)
pcib0: slot 29 INTC is routed to irq 11
found->	vendor=0x8086, dev=0x2487, revid=0x02
	bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=11
found->	vendor=0x8086, dev=0x2448, revid=0x42
	bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x248c, revid=0x02
	bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 4, range 32, base 000001f0, size  3, enabled
	map[14]: type 4, range 32, base 000003f4, size  2, enabled
	map[18]: type 4, range 32, base 00000170, size  3, enabled
	map[1c]: type 4, range 32, base 00000374, size  2, enabled
	map[20]: type 4, range 32, base 00001860, size  4, enabled
found->	vendor=0x8086, dev=0x248a, revid=0x02
	bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	map[20]: type 4, range 32, base 00001880, size  5, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x2483, revid=0x02
	bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[10]: type 4, range 32, base 00001c00, size  8, enabled
	map[14]: type 4, range 32, base 000018c0, size  6, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x2485, revid=0x02
	bus=0, slot=31, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[10]: type 4, range 32, base 00002400, size  8, enabled
	map[14]: type 4, range 32, base 00002000, size  7, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x2486, revid=0x02
	bus=0, slot=31, func=6
	class=07-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x3000-0x3fff
pcib1:   memory decode     0xd0100000-0xd01fffff
pcib1:   prefetched decode 0xe8000000-0xefffffff
---- initial configuration ------------------------
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 1.0.0
\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 1.0.1
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 1.0.0
\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 1.0.1
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 3, range 32, base e8000000, size 27, enabled
	map[14]: type 4, range 32, base 00003000, size  8, enabled
	map[18]: type 1, range 32, base d0100000, size 16, enabled
pcib1: matched entry for 1.0.INTA (src \\_SB_.LNKA)
pcib1: slot 0 INTA is routed to irq 11
found->	vendor=0x1002, dev=0x4c57, revid=0x00
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0387, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: NEC Corporation USB2.0 Hub Controller, class 9/0, rev 2.00/1.00, addr 2
uhub1: 4 ports with 4 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2:   secondary bus     2
pcib2:   subordinate bus   8
pcib2:   I/O decode        0x4000-0x8fff
pcib2:   memory decode     0xd0200000-0xdfffffff
pcib2:   prefetched decode 0xf0000000-0xf80fffff
pcib2:   Subtractively decoded bridge.
---- initial configuration ------------------------
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.0
\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.1
\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.2
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.1.0
\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.0
\\_SB_.LNKD irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.1
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.2
\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.3
\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.4.0
\\_SB_.LNKD irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.4.1
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.4.2
\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.4.3
\\_SB_.LNKE irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.8.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.0
\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.1
\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.2
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.1.0
\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.0
\\_SB_.LNKD irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.1
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.2
\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.3
\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.4.0
\\_SB_.LNKD irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.4.1
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.4.2
\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.4.3
\\_SB_.LNKE irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.8.0
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
	map[10]: type 1, range 32, base 50000000, size 12, enabled
pcib2: matched entry for 2.0.INTA (src \\_SB_.LNKA)
pcib2: slot 0 INTA is routed to irq 11
found->	vendor=0x104c, dev=0xac55, revid=0x01
	bus=2, slot=0, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0107, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base 51000000, size 12, enabled
pcib2: matched entry for 2.0.INTB (src \\_SB_.LNKB)
pcib2: slot 0 INTB is routed to irq 11
found->	vendor=0x104c, dev=0xac55, revid=0x01
	bus=2, slot=0, func=1
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0107, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 3, range 32, base f8000000, size 12, enabled
pcib2: matched entry for 2.2.INTA (src \\_SB_.LNKC)
pcib2: slot 2 INTA is routed to irq 11
found->	vendor=0x1260, dev=0x3873, revid=0x01
	bus=2, slot=2, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base d0200000, size 12, enabled
	map[14]: type 4, range 32, base 00008000, size  6, enabled
pcib2: matched entry for 2.8.INTA (src \\_SB_.LNKE)
pcib2: slot 8 INTA is routed to irq 11
found->	vendor=0x8086, dev=0x1031, revid=0x42
	bus=2, slot=8, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
cbb0: <TI1520 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 0.0 on pci2
pcib2: device cbb0 requested decoded memory range 0x50000000-0x50000fff
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0xac55104c 0x02100107 0x06070001 0x00824008 
  0x10: 0x50000000 0x020000a0 0xb0050302 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 
  0x40: 0x05121014 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x0844d071 0x00000000 0x00000000 0x01d21022 
  0x90: 0x406402c0 0x00000000 0x00000000 0x00000000 
  0xa0: 0xfe120001 0x00c00000 0x00000813 0x0000000f 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
cbb1: <TI1520 PCI-CardBus Bridge> mem 0x51000000-0x51000fff irq 11 at device 0.1 on pci2
pcib2: device cbb1 requested decoded memory range 0x51000000-0x51000fff
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
  0x00: 0xac55104c 0x02100107 0x06070001 0x00824008 
  0x10: 0x51000000 0x220000a0 0xb0080602 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0740020b 
  0x40: 0x05121014 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x0844f071 0x00000000 0x00000000 0x01d21022 
  0x90: 0x406402c0 0x00000000 0x00000000 0x00000000 
  0xa0: 0xfe120001 0x00c00000 0x00000813 0x0000000f 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
wi0: <Intersil Prism2.5> mem 0xf8000000-0xf8000fff irq 11 at device 2.0 on pci2
pcib2: device wi0 requested decoded memory range 0xf8000000-0xf8000fff
wi0: [GIANT-LOCKED]
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary (1.1.1), Station (1.7.4)
wi0: bpf attached
wi0: Ethernet address: 00:05:3c:03:86:b9
wi0: bpf attached
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wi0: bpf attached
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x8000-0x803f mem 0xd0200000-0xd0200fff irq 11 at device 8.0 on pci2
pcib2: device fxp0 requested decoded memory range 0xd0200000-0xd0200fff
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1031 1014 0209 0042
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:09:6b:c2:86:92
fxp0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1-master: stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata1-slave:  stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x0
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
ichsmb0: <Intel 82801CA (ICH3) SMBus controller> port 0x1880-0x189f irq 11 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
pcm0: <Intel ICH3 (82801CA)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 11 at device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Analog Devices AD1881A AC97 Codec (id = 0x41445348)>
pcm0: Codec features headphone, 6 bit master volume, Analog Devices Phat Stereo
pcm0: Primary codec extended features variable rate PCM
pcm0: sndbuf_setmap 2c1000, 4000; 0xdc6a7000 -> 2c1000
pcm0: sndbuf_setmap 2f1000, 4000; 0xdc6ab000 -> 2f1000
pci0: <simple comms> at device 31.6 (no driver attached)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> flags 0x2000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00002000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
unknown: not probed (disabled)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
acpi_ec0: Changing GLK from 1 to 0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xdc000-0xdffff,0xd1000-0xd1fff,0xd0000-0xd0fff,0xc0000-0xcffff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 64 4f 4f 88 59 9e 
9a 1f 00 4f 0d 0e 00 00 07 80 92 83 8f 28 1f 8f 
9b a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 64 4f 4f 88 59 9e 
9a 1f 00 4f 0d 0e 00 00 07 80 92 83 8f 28 1f 8f 
9b a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1798480188 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_cmbat0: battery initialization start
acpi_ec0: info: new max delay is 45 us
acpi_ec0: info: new max delay is 50 us
acpi_ec0: info: new max delay is 195 us
acpi_cmbat0: battery initialization done, tried 1 times
acpi_cmbat1: battery initialization start
acpi_ec0: info: new max delay is 220 us
acpi_cmbat1: battery initialization done, tried 1 times
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
pcib2: device cardbus1 requested decoded memory range 0x20000000-0xffffffff
pcib2: device cardbus1 requested decoded memory range 0x20000000-0xffffffff
pcib2: device cardbus1 requested decoded I/O range 0x1000-0xffffffff
found->	vendor=0x115d, dev=0x0003, revid=0x03
	bus=6, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0xa8 (5040 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D1 D2 D3  current D0
dc0: <Xircom X3201 10/100BaseTX> port 0x1100-0x117f mem 0x20000000-0x200007ff,0x20000800-0x20000fff irq 11 at device 0.0 on cardbus1
pcib2: device dc0 requested decoded I/O range 0x1100-0x117f
miibus1: <MII bus> on dc0
tdkphy0: <TDK 78Q2120 media interface> on miibus1
tdkphy0: OUI 0x00c039, model 0x0014, rev. 10
tdkphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: bpf attached
dc0: Ethernet address: 00:10:a4:e0:07:4f
dc0: [GIANT-LOCKED]
pcib2: device cardbus1 requested decoded memory range 0x20000000-0xffffffff
pcib2: device cardbus1 requested decoded memory range 0x20000000-0xffffffff
pcib2: device cardbus1 requested decoded I/O range 0x1000-0xffffffff
found->	vendor=0x115d, dev=0x0103, revid=0x03
	bus=6, slot=0, func=1
	class=07-00-02, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D1 D2 D3  current D0
pcib2: device sio4 requested decoded I/O range 0x1000-0x1007
sio4: irq maps: 0x105 0x905 0x105 0x105
sio4: probe failed test(s): 0 1 2 4 6 7 9
pcib2: device sio4 requested decoded I/O range 0x1000-0x1007
sio4: irq maps: 0x105 0x905 0x105 0x105
sio4: probe failed test(s): 0 1 2 4 6 7 9
cardbus1: <simple comms, UART> at device 0.1 (no driver attached)
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel ICH3 chip
ata0-master: setting UDMA100 on Intel ICH3 chip
ad0: <IC25N040ATCS05-0/CS4OA61A> ATA-5 disk at ata0-master
ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
pcm0: measured ac97 link rate at 48008 Hz, will use 48000 Hz
GEOM: new disk ad0
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/104/63 s:63 l:24569937
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:24570000 l:31480785
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:12 s(CHS):1023/255/63 e(CHS):1023/254/63 s:56064960 l:22075200
GEOM: Configure ad0s1, start 32256 length 12579807744 end 12579839999
GEOM: Configure ad0s2, start 12579840000 length 16118161920 end 28698001919
GEOM: Configure ad0s4, start 28705259520 length 11302502400 end 40007761919
GEOM: Configure ad0s2a, start 0 length 134217728 end 134217727
GEOM: Configure ad0s2b, start 134217728 length 2151677952 end 2285895679
GEOM: Configure ad0s2c, start 0 length 16118161920 end 16118161919
GEOM: Configure ad0s2e, start 2285895680 length 1610612736 end 3896508415
GEOM: Configure ad0s2f, start 3896508416 length 1073741824 end 4970250239
GEOM: Configure ad0s2g, start 4970250240 length 11147911680 end 16118161919
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
(probe3:ata1:0:1:0): error 22
(probe3:ata1:0:1:0): Unretryable Error
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
(probe3:ata1:0:1:0): error 22
(probe3:ata1:0:1:0): Unretryable Error
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
Linux ELF exec handler installed
linprocfs registered
splash: image decoder found: daemon_saver
Comment 1 Kevin Oberman 2004-04-12 18:35:26 UTC 
PCI updates on Apr-9 by imp have fixed this problem. Please close the
PR.
-- 
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: oberman@es.net			Phone: +1 510 486-8634
Comment 2 Simon L. B. Nielsen freebsd_committer freebsd_triage 2004-04-12 20:03:35 UTC 
State Changed
From-To: open->closed

Close at submitters request. 
Thanks for letting us know that the problem is solved.