Bug 79141
| Summary: | [agp] 5.4Beta1 does not recognize my intel graphics card anymore | ||
|---|---|---|---|
| Product: | Base System | Reporter: | Daniel Graupner <Daniel.Graupner> |
| Component: | i386 | Assignee: | Eric Anholt <anholt> |
| Status: | Closed FIXED | ||
| Severity: | Affects Only Me | ||
| Priority: | Normal | ||
| Version: | 5.4-PRERELEASE | ||
| Hardware: | Any | ||
| OS: | Any | ||
State Changed From-To: open->feedback Do you have "device agp" in your kernelconfig, or did you load the agp kernelmodule? I have "device agp" in my kernel config. Regards, Daniel. Daniel Graupner wrote:
>I have "device agp" in my kernel config.
>
>
I have to add... I also tried the kernel module (without device agp in
kernelconfig) with the same results.
Regards, Daniel.
State Changed From-To: feedback->open Feedback received Responsible Changed From-To: freebsd-i386->anholt anholt has expressed an interest in agp PRs. State Changed From-To: open->closed This is a limitation of older FreeBSD that is fixed in current CVS, and I don't really expect it to be backported. As a workaround, you can remove the loading of the agp_video module to allow attachment of agp again. |
I have a Dell Inspiron 510m Laptop with an Intel Graphics Card, since I upgraded from 5.3 to 5.4B1 (same Kernelconf, make buildworld) the system does not recognize the card anymore. dmesg|grep agp does not grep anything with 5.4, with 5.3 I had: agp0: <Intel 82855GME (855GME GMCH) SVGA controller> port 0xc000-0xc007 mem 0xfaf80000-0xfaffffff,0xf0000000-0xf7ffffff irq 11 at device 2.0 on pci0 agp0: detected 892k stolen memory agp0: aperture size is 128M With pciconf I am able to discover the card (5.4 and 5.3): acpi_video0@pci0:2:0: class=0x030000 card=0x01641028 chip=0x35828086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82852GM/GME/GMV/PM, 855GM/GME Montara Integrated Graphics Device' class = display subclass = VGA acpi_video1@pci0:2:1: class=0x038000 card=0x01641028 chip=0x35828086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82852GM/GME/GMV/PM, 855GM/GME Montara Integrated Graphics Device' class = display complete dmesg after upgrade: Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-PRERELEASE #6: Tue Mar 22 19:42:52 CET 2005 root@mars:/usr/obj/usr/src/sys/DAEL Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1.70GHz (1698.56-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6 Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2, SS,TM,PBE> real memory = 535470080 (510 MB) avail memory = 514314240 (490 MB) npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL CPi R > on motherboard Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU (4 Cx states)> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_cmbat1: <Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI link \\_SB_.PCI0.LNKB has invalid initial irq 11, ignoring pci0: <ACPI PCI bus> on pcib0 pci0: <base peripheral> at device 0.1 (no driver attached) pci0: <base peripheral> at device 0.3 (no driver attached) acpi_video0: <ACPI video extension> port 0xc000-0xc007 mem 0xfaf80000-0xfaffffff,0xf0000000-0xf7ffffff irq 11 at d evice 2.0 on pci0 acpi_video1: <ACPI video extension> mem 0xfaf00000-0xfaf7ffff,0xe8000000-0xefffffff at device 2.1 on pci0 evaluation of \\_SB_.PCI0.VID2._DOD makes no sense uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0 usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 11 at device 29.1 on pci0 usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0 usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib1 cbb0: <TI4510 PCI-CardBus Bridge> at device 1.0 on pci1 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 fwohci0: <1394 Open Host Controller Interface> mem 0xfcff8000-0xfcffbfff,0xfcfff800-0xfcffffff irq 11 at device 1. 1 on pci1 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 33:4f:c0:00:02:8c:a0:30 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 32:4f:c0:8c:a0:30 fwe0: Ethernet address: 32:4f:c0:8c:a0:30 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci1: <network> at device 3.0 (no driver attached) fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0xecc0-0xecff mem 0xfcffd000-0xfcffdfff irq 11 at device 8.0 on pci1 miibus0: <MII bus> on fxp0 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:0f:1f:c2:08:a9 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pcm0: <Intel ICH4 (82801DB)> port 0xdc40-0xdc7f,0xd800-0xd8ff mem 0xfaeff400-0xfaeff4ff,0xfaeff800-0xfaeff9ff irq 5 at device 31.5 on pci0 pcm0: <SigmaTel STAC9750/51 AC97 Codec> pci0: <simple comms> at device 31.6 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 orm0: <ISA Option ROMs> at iomem 0xcf800-0xcffff,0xcf000-0xcf7ff,0xce800-0xcefff,0xce000-0xce7ff,0xcd800-0xcdfff,0 xc0000-0xcd7ff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1698562899 Hz quality 800 Timecounters tick every 10.000 msec ad0: 38154MB <HTS548040M9AT00/MG2OA53A> [77520/16/63] at ata0-master UDMA100 acd0: CDRW <NEC DVD+RW ND-6100A/104D> at ata1-master UDMA33 cd0 at ata1 bus 0 target 0 lun 0 cd0: <_NEC DVD+RW ND-6100A 104D> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Mounting root from ufs:/dev/ad0s2a How-To-Repeat: That is a permanent problem with 5.4, I have to downgrade to use resolution higher than vga 8-(