Bug 83518

dmesg from an HP DL145G2. Please update http://www.freebsd.org/platforms/amd64/motherboards.html to include this. The machine works, but did not recognize the hard disk with 5.4/amd64 (with i386 it works). FreeBSD 6.0 sees everything. The machine has 4 GB RAM.

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA #7: Fri Jul 15 18:19:31 CEST 2005
    root@eger:/usr/obj/usr/src/sys/EGER
ACPI APIC Table: <PTLTD          APIC  >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 252 (2612.05-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20f51  Stepping = 1
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x1<SSE3>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
real memory  = 5368709120 (5120 MB)
avail memory = 4119322624 (3928 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-30 on motherboard
ioapic2 <Version 1.1> irqs 31-37 on motherboard
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNK1> irq 0 on acpi0
pci_link1: <ACPI PCI Link LNK2> irq 0 on acpi0
pci_link2: <ACPI PCI Link LNK3> irq 0 on acpi0
pci_link3: <ACPI PCI Link LNK4> irq 0 on acpi0
pci_link4: <ACPI PCI Link LNK5> irq 0 on acpi0
pci_link5: <ACPI PCI Link LSMB> irq 0 on acpi0
pci_link6: <ACPI PCI Link LUS0> irq 0 on acpi0
pci_link7: <ACPI PCI Link LUS2> irq 0 on acpi0
pci_link8: <ACPI PCI Link LPID> irq 0 on acpi0
pci_link9: <ACPI PCI Link LSI1> irq 0 on acpi0
pci_link10: <ACPI PCI Link APCP> irq 0 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci_link6: BIOS IRQ 10 for -2146070552.2.INTA is invalid
pci_link7: BIOS IRQ 11 for -2146070552.2.INTB is invalid
pci_link9: BIOS IRQ 10 for -2146070552.8.INTA is invalid
pci0: <ACPI PCI bus> on pcib0
pci_link6: Unable to choose an IRQ
pci_link7: Unable to choose an IRQ
pci_link9: Unable to choose an IRQ
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x8c00-0x8fff at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xc8000000-0xc8000fff irq 20 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc8001000-0xc80010ff irq 21 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
atapci0: <nVidia nForce4 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1400-0x140f at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce4 SATA150 controller> port 0x1430-0x1437,0x1424-0x1427,0x1428-0x142f,0x1420-0x1423,0x1410-0x141f mem 0xc8002000-0xc8002fff irq 22 at device 8.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci_link0: Unable to choose an IRQ
pci1: <display, VGA> at device 5.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4101> mem 0xca000000-0xca00ffff irq 16 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:13:21:b5:53:94
pcib3: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci_link3: Unable to choose an IRQ
bge1: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4101> mem 0xca100000-0xca10ffff irq 19 at device 0.0 on pci3
miibus1: <MII bus> on bge1
brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge1: Ethernet address: 00:13:21:b5:53:95
pcib4: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI Host-PCI bridge> on acpi0
pci128: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 1.0 on pci128
pci129: <ACPI PCI bus> on pcib6
pci128: <base peripheral, interrupt controller> at device 1.1 (no driver attached)
pcib7: <ACPI PCI-PCI bridge> at device 2.0 on pci128
pci134: <ACPI PCI bus> on pcib7
pci128: <base peripheral, interrupt controller> at device 2.1 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
orm0: <ISA Option ROM> at iomem 0xcd800-0xce7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ad4: 76319MB <Maxtor 6Y080M0 YAR511W0> at ata2-master SATA150
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s1a