Bug 88610

Summary: FreeBSD 6.0 bootonly crashes during boot after sis0, during sis1 w/ Fault 12 (regression)
Product: Base System Reporter: Mitch <mitch>
Component: i386Assignee: Gavin Atkinson <gavin>
Status: Closed FIXED    
Severity: Affects Only Me    
Priority: Normal    
Version: Unspecified   
Hardware: Any   
OS: Any   

Description Mitch 2005-11-07 18:10:18 UTC 
              System is a Synertron-Lex CV863A based on C3 gigapro 1Ghz w/ 512MB ram

PCI cardslot is loaded w/ Soekris LAN 1641 which is a 4 port PCI card based on DP83816.

The card works fine in another system, and works fine in this system with FreeBSD 5.4

With 6.0 release 0 boot only iso, it crashes during boot while detecting hardware - I have tried reseting BIOS defaults for stability, and booting with acpi off, safe mode, etc. - same results.

Can log the full boot message if that will help and am totally willing to do any testing, confirmation, etc. of any information to help move this along - this is a roadblock for us at the moment though as some software we need depends on FreeBSD 6.0 and we need to get it running on this hardware...

Thank you in advance!

m/

Fix: 

FreeBSD 5.4 does not show the problem.
How-To-Repeat:               Insert a boot cd and let it run - it will fault 12, and restart after the first line showing information about sis1 (sis0 completes it's detection)
Comment 1 Mitch 2005-11-12 07:59:50 UTC 
Something changed between versions - at first I thought the problem had
something to with the lan card - or maybe compatibility between the lan card
and the host system - but now I have a second lan card that produces the
same problem - but ONLY with FreeBSD 6.0 release.

I'm hoping stable is the right list? If it's supposed to be current, sorry -
first time posting a problem like this.

The first 4 lans are on the motherboard.

The Fault 12 occurs just after starting to detect the 6th lan interface.

Here's the 5th lan (first on this PCI card
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc000
pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range
pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range
rl4: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem
0xee013000-0xee0130ff irq 11 at device 8.0 on pci4
pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range
miibus4: <MII bus> on rl4
rlphy4: <RealTek internal media interface> on miibus4
rlphy4:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl4: bpf attached
rl4: Ethernet address: 00:30:18:49:3f:44
rl4: [MPSAFE]

And here's the start of the 6th.
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc100
pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range
pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range
rl5: <RealTek 8139 10/100BaseTX> port 0xc100-0xc1ff mem
0xee010000-0xee0100ff irq 7 at device 9.0 on pci4
pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range
Fatal trap 12: page fault while in kernel mode
fault virtual address	= 0x10
fault code		= supervisor read, page not present
instruction pointer	= 0x20:0xc069c394
stack pointer	        = 0x28:0xc1020938
frame pointer	        = 0x28:0xc1020938
code segment		= base rx0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, def32 1, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 0 (swapper)
trap number		= 12
panic: page fault
Uptime: 1s

The problem occurs in the same place with a different type of 4 port lan
card, however the problem does not occur in a system with only one LAN on
the motherboard (with version 6.0 or 5.4)

So below I have attached boot messages from a 6.0 bootonly.iso (I tried to
capture messages from a bootonly 5.4, but using "boot -h" or "boot -h -v"
stops after loading acpi - presumably when it starts using the serial port -
and yet in 6.0 - this is fine ;-)

Any help greatly appreciated - I'll do whatever testing and provide whatever
other information is required - thanks in advance!

m/

FreeBSD 6.0 release bootonly console dump:

SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000ffff0000 len=0000000000010000
SMAP type=03 base=000000001eff3000 len=000000000000d000
SMAP type=04 base=000000001eff0000 len=0000000000003000
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=01 base=0000000000100000 len=000000001eef0000
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Fri Nov  4 01:40:13 UTC 2005
    sullrich@builder.livebsd.com:/usr/obj/usr/src/sys/pfSense.6
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b0a000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b0a158.
Calibrating clock(s) ... i8254 clock: 1193212 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1002277897 Hz
CPU: VIA C3 Nehemiah+RNG+ACE (1002.28-MHz 686-class CPU)
  Origin = "CentaurHauls"  Id = 0x698  Stepping = 8
 
Features=0x381b83f<FPU,VME,DE,PSE,TSC,MSR,SEP,MTRR,PGE,CMOV,PAT,MMX,FXSR,SSE
>
real memory  = 520028160 (495 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c28000 - 0x000000001e6fffff, 497909760 bytes (121560 pages)
avail memory = 499310592 (476 MB)
bios32: Found BIOS32 Service Directory header at 0xc00faf30
bios32: Entry = 0xfb3b0 (c00fb3b0)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb400
pnpbios: Found PnP BIOS data at 0xc00fbec0
pnpbios: Entry = f0000:bef0  Rev = 1.0
Other BIOS signatures found:
crypto: <crypto core>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan: <802.11 MAC ACL support>
wlan: mac acl policy registered
wlan: <802.11 Link Layer>
mem: <memory>
nfslock: pseudo-device
null: <null device, zero device>
io: <I/O>
random: <entropy source, Hardware, VIA Nehemiah>
ath_hal: 0.9.16.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413,
DFS)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <CLE266 AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=31231106)
pcibios: BIOS version 2.10
Found $PIR table, 12 entries at 0xc00fdea0
PCI-Only Interrupts: 5 7 10 11
Location  Bus Device Pin  Link  IRQs
slot 1      0    8    A   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 1      0    8    B   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 1      0    8    C   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 1      0    8    D   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 2      0    9    A   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 2      0    9    B   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 2      0    9    C   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 2      0    9    D   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   10    A   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   10    B   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   10    C   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   10    D   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 4      0   11    A   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 4      0   11    B   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 4      0   11    C   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 4      0   11    D   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 5      0   12    A   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 5      0   12    B   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 5      0   12    C   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 5      0   12    D   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 6      0   13    A   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 6      0   13    B   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 6      0   13    C   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 6      0   13    D   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 7      0   14    A   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 7      0   14    B   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 7      0   14    C   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 7      0   14    D   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 8      0   15    A   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 8      0   15    B   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 8      0   15    C   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 8      0   15    D   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 9      0   16    A   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 9      0   16    B   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 9      0   16    C   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 9      0   16    D   0x05  3 4 5 6 7 9 10 11 12 14 15
embedded    0   17    C   0x03  3 4 5 6 7 9 10 11 12 14 15
embedded    0   17    D   0x05  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    A   0x01  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    B   0x02  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    C   0x03  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    D   0x05  3 4 5 6 7 9 10 11 12 14 15
embedded    0   16    A   0x01  3 4 5 6 7 9 10 11 12 14 15
embedded    0   16    B   0x02  3 4 5 6 7 9 10 11 12 14 15
embedded    0   16    C   0x03  3 4 5 6 7 9 10 11 12 14 15
embedded    0   16    D   0x05  3 4 5 6 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 15 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 15 func 0
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
pci_link0: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  3 4 6 7 10 11 12
pci_link0: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  3 4 6 7 10 11 12
pci_link0: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 6 7 10 11 12
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link1: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 4 6 7 10 11 12
pci_link1: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 4 6 7 10 11 12
pci_link1: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 6 7 10 11 12
pci_link2: <ACPI PCI Link LNKC> irq 7 on acpi0
pci_link2: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    7   N     0  3 4 6 7 10 11 12
pci_link2: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0    7   N     0  3 4 6 7 10 11 12
pci_link2: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 6 7 10 11 12
pci_link3: <ACPI PCI Link LNKD> irq 5 on acpi0
pci_link3: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  3 4 6 7 10 11 12
pci_link3: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 6 7 10 11 12
pci_link3: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 6 7 10 11 12
ACPI timer: 1/2 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x4010
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x1106, dev=0x3123, revid=0x00
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
	lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type 3, range 32, base e4000000, size 26, enabled
found->	vendor=0x1106, dev=0xb091, revid=0x00
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0xa230, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	bus=0, slot=8, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000
ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000db00, size  8, enabled
	map[14]: type 1, range 32, base ee11c000, size  8, enabled
pcib0: matched entry for 0.8.INTA (src \_SB_.PCI0.LNKA:0)
pcib0: slot 8 INTA routed to irq 10 via \_SB_.PCI0.LNKA
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	bus=0, slot=9, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000
ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000d000, size  8, enabled
	map[14]: type 1, range 32, base ee11e000, size  8, enabled
pcib0: matched entry for 0.9.INTA (src \_SB_.PCI0.LNKB:0)
pcib0: slot 9 INTA routed to irq 11 via \_SB_.PCI0.LNKB
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	bus=0, slot=10, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000
ns)
	intpin=a, irq=7
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000d100, size  8, enabled
	map[14]: type 1, range 32, base ee110000, size  8, enabled
pcib0: matched entry for 0.10.INTA (src \_SB_.PCI0.LNKC:0)
pcib0: slot 10 INTA routed to irq 7 via \_SB_.PCI0.LNKC
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	bus=0, slot=11, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000
ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000d200, size  8, enabled
	map[14]: type 1, range 32, base ee111000, size  8, enabled
pcib0: matched entry for 0.11.INTA (src \_SB_.PCI0.LNKD:0)
pci_link3: Picked IRQ 9 with weight 0
pcib0: slot 11 INTA routed to irq 9 via \_SB_.PCI0.LNKD
found->	vendor=0x1180, dev=0x0476, revid=0x82
	bus=0, slot=12, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750
ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base ee112000, size 12, enabled
pcib0: matched entry for 0.12.INTA (src \_SB_.PCI0.LNKA:0)
pcib0: slot 12 INTA routed to irq 10 via \_SB_.PCI0.LNKA
found->	vendor=0x1180, dev=0x0476, revid=0x82
	bus=0, slot=12, func=1
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750
ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base ee117000, size 12, enabled
pcib0: matched entry for 0.12.INTB (src \_SB_.PCI0.LNKB:0)
pcib0: slot 12 INTB routed to irq 11 via \_SB_.PCI0.LNKB
found->	vendor=0x12d8, dev=0x8148, revid=0x00
	bus=0, slot=13, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1106, dev=0x3038, revid=0x80
	bus=0, slot=16, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[20]: type 4, range 32, base 0000dc00, size  5, enabled
pcib0: matched entry for 0.16.INTA (src \_SB_.PCI0.LNKA:0)
pcib0: slot 16 INTA routed to irq 10 via \_SB_.PCI0.LNKA
found->	vendor=0x1106, dev=0x3038, revid=0x80
	bus=0, slot=16, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[20]: type 4, range 32, base 0000dd00, size  5, enabled
pcib0: matched entry for 0.16.INTB (src \_SB_.PCI0.LNKB:0)
pcib0: slot 16 INTB routed to irq 11 via \_SB_.PCI0.LNKB
found->	vendor=0x1106, dev=0x3038, revid=0x80
	bus=0, slot=16, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=7
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[20]: type 4, range 32, base 0000de00, size  5, enabled
pcib0: matched entry for 0.16.INTC (src \_SB_.PCI0.LNKC:0)
pcib0: slot 16 INTC routed to irq 7 via \_SB_.PCI0.LNKC
found->	vendor=0x1106, dev=0x3104, revid=0x82
	bus=0, slot=16, func=3
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base ee11d000, size  8, enabled
pcib0: matched entry for 0.16.INTD (src \_SB_.PCI0.LNKD:0)
pcib0: slot 16 INTD routed to irq 9 via \_SB_.PCI0.LNKD
found->	vendor=0x1106, dev=0x3177, revid=0x00
	bus=0, slot=17, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x1106, dev=0x0571, revid=0x06
	bus=0, slot=17, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000df00, size  4, enabled
found->	vendor=0x1106, dev=0x3059, revid=0x50
	bus=0, slot=17, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=7
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000e000, size  8, enabled
pcib0: matched entry for 0.17.INTC (src \_SB_.PCI0.LNKC:0)
pcib0: slot 17 INTC routed to irq 7 via \_SB_.PCI0.LNKC
agp0: <VIA 862x (CLE266) host to PCI bridge> mem 0xe4000000-0xe7ffffff at
device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe4000000
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xec000000-0xedffffff
pcib1:   prefetched decode 0xe8000000-0xebffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found->	vendor=0x1106, dev=0x3122, revid=0x03
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 3, range 32, base e8000000, size 26, enabled
pcib1: (null) requested memory range 0xe8000000-0xebffffff: good
	map[14]: type 1, range 32, base ec000000, size 24, enabled
pcib1: (null) requested memory range 0xec000000-0xecffffff: good
pcib0: matched entry for 0.1.INTA (src \_SB_.PCI0.LNKA:0)
pcib0: slot 1 INTA routed to irq 10 via \_SB_.PCI0.LNKA
pcib1: slot 0 INTA is routed to irq 10
pci1: <display, VGA> at device 0.0 (no driver attached)
rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xdb00
rl0: <RealTek 8139 10/100BaseTX> port 0xdb00-0xdbff mem
0xee11c000-0xee11c0ff irq 10 at device 8.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:40:48:b1:11:5d
rl0: [MPSAFE]
rl1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd000
rl1: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem
0xee11e000-0xee11e0ff irq 11 at device 9.0 on pci0
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: bpf attached
rl1: Ethernet address: 00:40:48:b1:11:5c
rl1: [MPSAFE]
rl2: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd100
rl2: <RealTek 8139 10/100BaseTX> port 0xd100-0xd1ff mem
0xee110000-0xee1100ff irq 7 at device 10.0 on pci0
miibus2: <MII bus> on rl2
rlphy2: <RealTek internal media interface> on miibus2
rlphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl2: bpf attached
rl2: Ethernet address: 00:40:48:b1:11:5b
rl2: [MPSAFE]
rl3: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd200
rl3: <RealTek 8139 10/100BaseTX> port 0xd200-0xd2ff mem
0xee111000-0xee1110ff irq 9 at device 11.0 on pci0
miibus3: <MII bus> on rl3
rlphy3: <RealTek internal media interface> on miibus3
rlphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl3: bpf attached
rl3: Ethernet address: 00:40:48:b1:11:5a
rl3: [MPSAFE]
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xee112000-0xee112fff irq 10 at
device 12.0 on pci0
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xee112000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0x04761180 0x02100007 0x06070082 0x00822000 
  0x10: 0xee112000 0x020000dc 0x20020200 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0700010a 
  0x40: 0x78563412 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x00a00001 0x00000000 0x04630463 0x00000000 
  0x90: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xb0: 0x00000000 0x00000000 0x00003800 0x00000000 
  0xc0: 0x78563412 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 
  0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
cbb1: <RF5C476 PCI-CardBus Bridge> mem 0xee117000-0xee117fff irq 11 at
device 12.1 on pci0
cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xee117000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
  0x00: 0x04761180 0x02100007 0x06070082 0x00822000 
  0x10: 0xee117000 0x020000dc 0x20030300 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0700020b 
  0x40: 0x78563412 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x00a00001 0x00000000 0x04630463 0x00000000 
  0x90: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x78563412 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 
  0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
pcib2: <PCI-PCI bridge> at device 13.0 on pci0
pcib2:   secondary bus     4
pcib2:   subordinate bus   4
pcib2:   I/O decode        0xc000-0xcfff
pcib2:   memory decode     0xee000000-0xee0fffff
pcib2:   prefetched decode 0xfff00000-0xfffff
pci4: <PCI bus> on pcib2
pci4: physical bus=4
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	bus=4, slot=8, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000
ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000c000, size  8, enabled
pcib2: (null) requested I/O range 0xc000-0xc0ff: in range
	map[14]: type 1, range 32, base ee013000, size  8, enabled
pcib2: (null) requested memory range 0xee013000-0xee0130ff: good
pcib0: matched entry for 0.13.INTA (src \_SB_.PCI0.LNKB:0)
pcib0: slot 13 INTA routed to irq 11 via \_SB_.PCI0.LNKB
pcib2: slot 8 INTA is routed to irq 11
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	bus=4, slot=9, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000
ns)
	intpin=a, irq=7
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000c100, size  8, enabled
pcib2: (null) requested I/O range 0xc100-0xc1ff: in range
	map[14]: type 1, range 32, base ee010000, size  8, enabled
pcib2: (null) requested memory range 0xee010000-0xee0100ff: good
pcib0: matched entry for 0.13.INTB (src \_SB_.PCI0.LNKC:0)
pcib0: slot 13 INTB routed to irq 7 via \_SB_.PCI0.LNKC
pcib2: slot 9 INTA is routed to irq 7
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	bus=4, slot=10, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000
ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000c200, size  8, enabled
pcib2: (null) requested I/O range 0xc200-0xc2ff: in range
	map[14]: type 1, range 32, base ee011000, size  8, enabled
pcib2: (null) requested memory range 0xee011000-0xee0110ff: good
pcib0: matched entry for 0.13.INTC (src \_SB_.PCI0.LNKD:0)
pcib0: slot 13 INTC routed to irq 9 via \_SB_.PCI0.LNKD
pcib2: slot 10 INTA is routed to irq 9
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	bus=4, slot=11, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000
ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000c300, size  8, enabled
pcib2: (null) requested I/O range 0xc300-0xc3ff: in range
	map[14]: type 1, range 32, base ee012000, size  8, enabled
pcib2: (null) requested memory range 0xee012000-0xee0120ff: good
pcib0: matched entry for 0.13.INTD (src \_SB_.PCI0.LNKA:0)
pcib0: slot 13 INTD routed to irq 10 via \_SB_.PCI0.LNKA
pcib2: slot 11 INTA is routed to irq 10
rl4: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc000
pcib2: re0 requested I/O range 0xc000-0xc0ff: in range
pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range
rl4: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem
0xee013000-0xee0130ff irq 11 at device 8.0 on pci4
pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range
miibus4: <MII bus> on rl4
rlphy4: <RealTek internal media interface> on miibus4
rlphy4:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl4: bpf attached
rl4: Ethernet address: 00:30:18:49:3f:44
rl4: [MPSAFE]
rl5: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc100
pcib2: re0 requested I/O range 0xc100-0xc1ff: in range
pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range
rl5: <RealTek 8139 10/100BaseTX> port 0xc100-0xc1ff mem
0xee010000-0xee0100ff irq 7 at device 9.0 on pci4
pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range


Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address	= 0x10
fault code		= supervisor read, page not present
instruction pointer	= 0x20:0xc07407c0
stack pointer	        = 0x28:0xc0c209ec
frame pointer	        = 0x28:0xc0c209ec
code segment		= base rx0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, def32 1, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 0 (swapper)
trap number		= 12
panic: page fault
cpuid = 0
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000ffff0000 len=0000000000010000
SMAP type=03 base=000000001eff3000 len=000000000000d000
SMAP type=04 base=000000001eff0000 len=0000000000003000
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=01 base=0000000000100000 len=000000001eef0000
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov  3 09:36:13 UTC 2005
    root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ec1000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0ec1170.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0ec11b4.
Calibrating clock(s) ... i8254 clock: 1193206 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1002279760 Hz
CPU: VIA C3 Nehemiah+RNG+ACE (1002.28-MHz 686-class CPU)
  Origin = "CentaurHauls"  Id = 0x698  Stepping = 8
 
Features=0x381b83f<FPU,VME,DE,PSE,TSC,MSR,SEP,MTRR,PGE,CMOV,PAT,MMX,FXSR,SSE
>
real memory  = 520028160 (495 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001025000 - 0x000000001e6fffff, 493727744 bytes (120539 pages)
avail memory = 495345664 (472 MB)
bios32: Found BIOS32 Service Directory header at 0xc00faf30
bios32: Entry = 0xfb3b0 (c00fb3b0)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb400
pnpbios: Found PnP BIOS data at 0xc00fbec0
pnpbios: Entry = f0000:bef0  Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
random: <entropy source, Hardware, VIA Nehemiah>
nfslock: pseudo-device
io: <I/O>
mem: <memory>
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <CLE266 AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=31231106)
pcibios: BIOS version 2.10
Found $PIR table, 12 entries at 0xc00fdea0
PCI-Only Interrupts: 5 7 10 11
Location  Bus Device Pin  Link  IRQs
slot 1      0    8    A   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 1      0    8    B   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 1      0    8    C   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 1      0    8    D   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 2      0    9    A   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 2      0    9    B   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 2      0    9    C   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 2      0    9    D   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   10    A   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   10    B   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   10    C   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 3      0   10    D   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 4      0   11    A   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 4      0   11    B   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 4      0   11    C   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 4      0   11    D   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 5      0   12    A   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 5      0   12    B   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 5      0   12    C   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 5      0   12    D   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 6      0   13    A   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 6      0   13    B   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 6      0   13    C   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 6      0   13    D   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 7      0   14    A   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 7      0   14    B   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 7      0   14    C   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 7      0   14    D   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 8      0   15    A   0x05  3 4 5 6 7 9 10 11 12 14 15
slot 8      0   15    B   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 8      0   15    C   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 8      0   15    D   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 9      0   16    A   0x01  3 4 5 6 7 9 10 11 12 14 15
slot 9      0   16    B   0x02  3 4 5 6 7 9 10 11 12 14 15
slot 9      0   16    C   0x03  3 4 5 6 7 9 10 11 12 14 15
slot 9      0   16    D   0x05  3 4 5 6 7 9 10 11 12 14 15
embedded    0   17    C   0x03  3 4 5 6 7 9 10 11 12 14 15
embedded    0   17    D   0x05  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    A   0x01  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    B   0x02  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    C   0x03  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    D   0x05  3 4 5 6 7 9 10 11 12 14 15
embedded    0   16    A   0x01  3 4 5 6 7 9 10 11 12 14 15
embedded    0   16    B   0x02  3 4 5 6 7 9 10 11 12 14 15
embedded    0   16    C   0x03  3 4 5 6 7 9 10 11 12 14 15
embedded    0   16    D   0x05  3 4 5 6 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 15 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 15 func 0
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
pci_link0: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  3 4 6 7 10 11 12
pci_link0: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  3 4 6 7 10 11 12
pci_link0: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 6 7 10 11 12
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link1: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 4 6 7 10 11 12
pci_link1: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 4 6 7 10 11 12
pci_link1: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 6 7 10 11 12
pci_link2: <ACPI PCI Link LNKC> irq 7 on acpi0
pci_link2: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    7   N     0  3 4 6 7 10 11 12
pci_link2: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0    7   N     0  3 4 6 7 10 11 12
pci_link2: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 6 7 10 11 12
pci_link3: <ACPI PCI Link LNKD> irq 5 on acpi0
pci_link3: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  3 4 6 7 10 11 12
pci_link3: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 6 7 10 11 12
pci_link3: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 6 7 10 11 12
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x4010
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x1106, dev=0x3123, revid=0x00
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
	lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type 3, range 32, base e4000000, size 26, enabled
found->	vendor=0x1106, dev=0xb091, revid=0x00
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0xa230, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	bus=0, slot=8, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000
ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000db00, size  8, enabled
	map[14]: type 1, range 32, base ee11c000, size  8, enabled
pcib0: matched entry for 0.8.INTA (src \_SB_.PCI0.LNKA:0)
pcib0: slot 8 INTA routed to irq 10 via \_SB_.PCI0.LNKA
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	bus=0, slot=9, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000
ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000d000, size  8, enabled
	map[14]: type 1, range 32, base ee11e000, size  8, enabled
pcib0: matched entry for 0.9.INTA (src \_SB_.PCI0.LNKB:0)
pcib0: slot 9 INTA routed to irq 11 via \_SB_.PCI0.LNKB
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	bus=0, slot=10, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000
ns)
	intpin=a, irq=7
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000d100, size  8, enabled
	map[14]: type 1, range 32, base ee110000, size  8, enabled
pcib0: matched entry for 0.10.INTA (src \_SB_.PCI0.LNKC:0)
pcib0: slot 10 INTA routed to irq 7 via \_SB_.PCI0.LNKC
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	bus=0, slot=11, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000
ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000d200, size  8, enabled
	map[14]: type 1, range 32, base ee111000, size  8, enabled
pcib0: matched entry for 0.11.INTA (src \_SB_.PCI0.LNKD:0)
pci_link3: Picked IRQ 9 with weight 0
pcib0: slot 11 INTA routed to irq 9 via \_SB_.PCI0.LNKD
found->	vendor=0x1180, dev=0x0476, revid=0x82
	bus=0, slot=12, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750
ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base ee112000, size 12, enabled
pcib0: matched entry for 0.12.INTA (src \_SB_.PCI0.LNKA:0)
pcib0: slot 12 INTA routed to irq 10 via \_SB_.PCI0.LNKA
found->	vendor=0x1180, dev=0x0476, revid=0x82
	bus=0, slot=12, func=1
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750
ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base ee117000, size 12, enabled
pcib0: matched entry for 0.12.INTB (src \_SB_.PCI0.LNKB:0)
pcib0: slot 12 INTB routed to irq 11 via \_SB_.PCI0.LNKB
found->	vendor=0x12d8, dev=0x8148, revid=0x00
	bus=0, slot=13, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1106, dev=0x3038, revid=0x80
	bus=0, slot=16, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[20]: type 4, range 32, base 0000dc00, size  5, enabled
pcib0: matched entry for 0.16.INTA (src \_SB_.PCI0.LNKA:0)
pcib0: slot 16 INTA routed to irq 10 via \_SB_.PCI0.LNKA
found->	vendor=0x1106, dev=0x3038, revid=0x80
	bus=0, slot=16, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[20]: type 4, range 32, base 0000dd00, size  5, enabled
pcib0: matched entry for 0.16.INTB (src \_SB_.PCI0.LNKB:0)
pcib0: slot 16 INTB routed to irq 11 via \_SB_.PCI0.LNKB
found->	vendor=0x1106, dev=0x3038, revid=0x80
	bus=0, slot=16, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=7
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[20]: type 4, range 32, base 0000de00, size  5, enabled
pcib0: matched entry for 0.16.INTC (src \_SB_.PCI0.LNKC:0)
pcib0: slot 16 INTC routed to irq 7 via \_SB_.PCI0.LNKC
found->	vendor=0x1106, dev=0x3104, revid=0x82
	bus=0, slot=16, func=3
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base ee11d000, size  8, enabled
pcib0: matched entry for 0.16.INTD (src \_SB_.PCI0.LNKD:0)
pcib0: slot 16 INTD routed to irq 9 via \_SB_.PCI0.LNKD
found->	vendor=0x1106, dev=0x3177, revid=0x00
	bus=0, slot=17, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x1106, dev=0x0571, revid=0x06
	bus=0, slot=17, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000df00, size  4, enabled
found->	vendor=0x1106, dev=0x3059, revid=0x50
	bus=0, slot=17, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=7
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000e000, size  8, enabled
pcib0: matched entry for 0.17.INTC (src \_SB_.PCI0.LNKC:0)
pcib0: slot 17 INTC routed to irq 7 via \_SB_.PCI0.LNKC
agp0: <VIA 862x (CLE266) host to PCI bridge> mem 0xe4000000-0xe7ffffff at
device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe4000000
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xec000000-0xedffffff
pcib1:   prefetched decode 0xe8000000-0xebffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found->	vendor=0x1106, dev=0x3122, revid=0x03
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 3, range 32, base e8000000, size 26, enabled
pcib1: (null) requested memory range 0xe8000000-0xebffffff: good
	map[14]: type 1, range 32, base ec000000, size 24, enabled
pcib1: (null) requested memory range 0xec000000-0xecffffff: good
pcib0: matched entry for 0.1.INTA (src \_SB_.PCI0.LNKA:0)
pcib0: slot 1 INTA routed to irq 10 via \_SB_.PCI0.LNKA
pcib1: slot 0 INTA is routed to irq 10
pci1: <display, VGA> at device 0.0 (no driver attached)
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xdb00
rl0: <RealTek 8139 10/100BaseTX> port 0xdb00-0xdbff mem
0xee11c000-0xee11c0ff irq 10 at device 8.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:40:48:b1:11:5d
rl0: [MPSAFE]
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd000
rl1: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem
0xee11e000-0xee11e0ff irq 11 at device 9.0 on pci0
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: bpf attached
rl1: Ethernet address: 00:40:48:b1:11:5c
rl1: [MPSAFE]
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd100
rl2: <RealTek 8139 10/100BaseTX> port 0xd100-0xd1ff mem
0xee110000-0xee1100ff irq 7 at device 10.0 on pci0
miibus2: <MII bus> on rl2
rlphy2: <RealTek internal media interface> on miibus2
rlphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl2: bpf attached
rl2: Ethernet address: 00:40:48:b1:11:5b
rl2: [MPSAFE]
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd200
rl3: <RealTek 8139 10/100BaseTX> port 0xd200-0xd2ff mem
0xee111000-0xee1110ff irq 9 at device 11.0 on pci0
miibus3: <MII bus> on rl3
rlphy3: <RealTek internal media interface> on miibus3
rlphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl3: bpf attached
rl3: Ethernet address: 00:40:48:b1:11:5a
rl3: [MPSAFE]
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xee112000-0xee112fff irq 10 at
device 12.0 on pci0
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xee112000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0x04761180 0x02100007 0x06070082 0x00822000 
  0x10: 0xee112000 0x020000dc 0x20020200 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0700010a 
  0x40: 0x78563412 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x00a00001 0x00000000 0x04630463 0x00000000 
  0x90: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xb0: 0x00000000 0x00000000 0x00003800 0x00000000 
  0xc0: 0x78563412 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 
  0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
cbb1: <RF5C476 PCI-CardBus Bridge> mem 0xee117000-0xee117fff irq 11 at
device 12.1 on pci0
cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xee117000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
  0x00: 0x04761180 0x02100007 0x06070082 0x00822000 
  0x10: 0xee117000 0x020000dc 0x20030300 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0700020b 
  0x40: 0x78563412 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x00a00001 0x00000000 0x04630463 0x00000000 
  0x90: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x78563412 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 
  0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
pcib2: <PCI-PCI bridge> at device 13.0 on pci0
pcib2:   secondary bus     4
pcib2:   subordinate bus   4
pcib2:   I/O decode        0xc000-0xcfff
pcib2:   memory decode     0xee000000-0xee0fffff
pcib2:   prefetched decode 0xfff00000-0xfffff
pci4: <PCI bus> on pcib2
pci4: physical bus=4
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	bus=4, slot=8, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000
ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000c000, size  8, enabled
pcib2: (null) requested I/O range 0xc000-0xc0ff: in range
	map[14]: type 1, range 32, base ee013000, size  8, enabled
pcib2: (null) requested memory range 0xee013000-0xee0130ff: good
pcib0: matched entry for 0.13.INTA (src \_SB_.PCI0.LNKB:0)
pcib0: slot 13 INTA routed to irq 11 via \_SB_.PCI0.LNKB
pcib2: slot 8 INTA is routed to irq 11
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	bus=4, slot=9, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000
ns)
	intpin=a, irq=7
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000c100, size  8, enabled
pcib2: (null) requested I/O range 0xc100-0xc1ff: in range
	map[14]: type 1, range 32, base ee010000, size  8, enabled
pcib2: (null) requested memory range 0xee010000-0xee0100ff: good
pcib0: matched entry for 0.13.INTB (src \_SB_.PCI0.LNKC:0)
pcib0: slot 13 INTB routed to irq 7 via \_SB_.PCI0.LNKC
pcib2: slot 9 INTA is routed to irq 7
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	bus=4, slot=10, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000
ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000c200, size  8, enabled
pcib2: (null) requested I/O range 0xc200-0xc2ff: in range
	map[14]: type 1, range 32, base ee011000, size  8, enabled
pcib2: (null) requested memory range 0xee011000-0xee0110ff: good
pcib0: matched entry for 0.13.INTC (src \_SB_.PCI0.LNKD:0)
pcib0: slot 13 INTC routed to irq 9 via \_SB_.PCI0.LNKD
pcib2: slot 10 INTA is routed to irq 9
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	bus=4, slot=11, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000
ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000c300, size  8, enabled
pcib2: (null) requested I/O range 0xc300-0xc3ff: in range
	map[14]: type 1, range 32, base ee012000, size  8, enabled
pcib2: (null) requested memory range 0xee012000-0xee0120ff: good
pcib0: matched entry for 0.13.INTD (src \_SB_.PCI0.LNKA:0)
pcib0: slot 13 INTD routed to irq 10 via \_SB_.PCI0.LNKA
pcib2: slot 11 INTA is routed to irq 10
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc000
pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range
pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range
rl4: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem
0xee013000-0xee0130ff irq 11 at device 8.0 on pci4
pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range
miibus4: <MII bus> on rl4
rlphy4: <RealTek internal media interface> on miibus4
rlphy4:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl4: bpf attached
rl4: Ethernet address: 00:30:18:49:3f:44
rl4: [MPSAFE]
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc100
pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range
pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range
rl5: <RealTek 8139 10/100BaseTX> port 0xc100-0xc1ff mem
0xee010000-0xee0100ff irq 7 at device 9.0 on pci4
pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range


Fatal trap 12: page fault while in kernel mode
fault virtual address	= 0x10
fault code		= supervisor read, page not present
instruction pointer	= 0x20:0xc069c394
stack pointer	        = 0x28:0xc1020938
frame pointer	        = 0x28:0xc1020938
code segment		= base rx0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, def32 1, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 0 (swapper)
trap number		= 12
panic: page fault
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
Comment 2 Mitch 2005-11-13 00:32:25 UTC 
Following up to my own post... I've just tried a single port NIC in the PCI
slot - that combination boots fine. But, as I mentioned before, it doesn't
seem to matter the chipset or PCI bridge chip (tried two different ones) -
it just seems to be that 6th network interface...

I don't have a dual port NIC readily available or I'd test that, but again,
it just seems to be related to this base board - BUT it worked in 5.4.

( the NIC that works was an intel / fxp nic)

Thanks!
Comment 3 Volker 2008-02-12 21:11:56 UTC 
Mitch,

I'm really sorry your PR hasn't touched for years.

Are you still able to reproduce the problem with a later release of
FreeBSD (say, latest 6.3-RELEASE)? If so, can you please provide a
backtrace so any developer can take a look at this problem?

If you're unable to reproduce the problem anymore, do you agree to
close this PR?
Comment 4 Gavin Atkinson freebsd_committer freebsd_triage 2008-02-19 17:46:58 UTC 
State Changed
From-To: open->feedback

Submitter was asked for feedback
Comment 5 Gavin Atkinson freebsd_committer freebsd_triage 2008-02-19 17:46:58 UTC 
Responsible Changed
From-To: freebsd-i386->gavin

Track
Comment 6 Gavin Atkinson freebsd_committer freebsd_triage 2008-04-22 14:14:59 UTC 
State Changed
From-To: feedback->closed

Feedback timeout (2 months).  To submitter: If you are still seeeing this 
issue, we can reopen the PR.  I have a feeling this may be fixed in 7.x 
already.