Bug 91748
| Summary: | acpi problem on Acer TravelMare 4652LMi (nvidia panic, cd/dvd not found, touchpad not work...etc) | ||
|---|---|---|---|
| Product: | Base System | Reporter: | Zdenek Dvoroznak <arutlupes> |
| Component: | i386 | Assignee: | freebsd-acpi (Nobody) <acpi> |
| Status: | Closed FIXED | ||
| Severity: | Affects Only Me | ||
| Priority: | Normal | ||
| Version: | 6.0-RELEASE | ||
| Hardware: | Any | ||
| OS: | Any | ||
State Changed From-To: open->feedback To submitter: is this still a problem with 6.2? Responsible Changed From-To: freebsd-i386->freebsd-acpi State Changed From-To: feedback->suspended Problem still exists, but submitter is no longer using FreeBSD. Mark suspended in case someone else has this hardware. The ACPI warnings are just saying that it can't read battery status, they are unrelated to the other problems. 6.1 doesn't support SATA CD/DVD drives, which is probably why he doesn't see the CD/DVD drive. For some reason he doesn't have a psm0 device which explains the touchpad not working. ACPI should enumerate a psm0 device, but even if it doesn't he can always use a hint to create one. -- John Baldwin State Changed From-To: suspended->closed No point in keeping suspended PRs from ages ago. Openning a new PR is cheap. |
When I try to boot with ACPI enabled I got a lot of errors and finally my CD/DVD rom isn`t found, my touchpad isn`t detected. When I try to load nvidia.ko my notebook resets. I tried almost everything what I found on internet (use DSDT - not from my laptop etc..) but nothing helped me. I don`t know what shell I do... Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE #13: Tue Jan 10 20:15:32 UTC 2006 root@ap3s.vetinet:/usr/src/sys/i386/compile/APES Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1.73GHz (1729.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8 Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0x180<EST,TM2> AMD Features=0x100000<NX> real memory = 536735744 (511 MB) avail memory = 515895296 (491 MB) ichwd module loaded npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <INSYDE RSDT_000> on motherboard acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 pci_link1: <ACPI PCI Link LNKB> irq 5 on acpi0 pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0 pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0 pci_link4: <ACPI PCI Link LNKE> irq 10 on acpi0 pci_link5: <ACPI PCI Link LNKF> irq 11 on acpi0 pci_link6: <ACPI PCI Link LNKG> irq 11 on acpi0 pci_link7: <ACPI PCI Link LNKH> irq 11 on acpi0 acpi_ec0: <Embedded Controller: GPE 0x1d> port 0x62,0x66 on acpi0 ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc1a84220), AE_NO_HARDWARE_RESPONSE ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc1a84220), AE_NO_HARDWARE_RESPONSE ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc1a84100), AE_NO_HARDWARE_RESPONSE ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc1a84100), AE_NO_HARDWARE_RESPONSE Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_perf0: <ACPI CPU Frequency Control> on cpu0 acpi_perf0: failed in PERF_STATUS attach device_attach: acpi_perf0 attach returned 6 acpi_perf0: <ACPI CPU Frequency Control> on cpu0 acpi_perf0: failed in PERF_STATUS attach device_attach: acpi_perf0 attach returned 6 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 9 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 5 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 9 at device 28.1 on pci0 pci12: <ACPI PCI bus> on pcib3 uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1200-0x121f irq 11 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1220-0x123f irq 11 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1240-0x125f irq 9 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1260-0x127f irq 9 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci6: <ACPI PCI bus> on pcib4 fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem 0xb0020000-0xb00207ff,0xb0024000-0xb0027fff irq 10 at device 0.0 on pci6 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:02:3f:59:71:40:1a:c4 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:02:3f:40:1a:c4 fwe0: Ethernet address: 02:02:3f:40:1a:c4 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset bge0: <Broadcom BCM5788 Gigabit Ethernet, ASIC rev. 0x3003> mem 0xb0010000-0xb001ffff irq 11 at device 1.0 on pci6 miibus0: <MII bus> on bge0 brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:0f:b0:93:98:71 pci6: <network> at device 2.0 (no driver attached) cbb0: <PCI-CardBus Bridge> at device 4.0 on pci6 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pci6: <memory, flash> at device 4.1 (no driver attached) pci6: <base peripheral> at device 4.2 (no driver attached) pci6: <memory, flash> at device 4.3 (no driver attached) pci6: <memory, flash> at device 4.4 (no driver attached) pcm0: <Intel ICH6 (82801FB)> port 0xe000-0xe0ff,0xe100-0xe13f mem 0xd0000000-0xd00001ff,0xd0000200-0xd00002ff irq 5 at device 30.2 on pci0 pcm0: [GIANT-LOCKED] pcm0: <Unknown AC97 Codec (id = 0x414c4752)> pci0: <simple comms, generic modem> at device 30.3 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH6 SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1100-0x110f at device 31.2 on pci0 atapci0: failed to enable memory mapping! ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_acad0: <AC Adapter> on acpi0 ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc1a84220), AE_NO_HARDWARE_RESPONSE ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc1a84220), AE_NO_HARDWARE_RESPONSE ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc1a84220), AE_NO_HARDWARE_RESPONSE ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc1a84220), AE_NO_HARDWARE_RESPONSE ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc1a84220), AE_NO_HARDWARE_RESPONSE ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc1a84220), AE_NO_HARDWARE_RESPONSE ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc1a84220), AE_NO_HARDWARE_RESPONSE ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc1a84220), AE_NO_HARDWARE_RESPONSE ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc1a84220), AE_NO_HARDWARE_RESPONSE ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc1a84220), AE_NO_HARDWARE_RESPONSE ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc1a84220), AE_NO_HARDWARE_RESPONSE ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc1a84220), AE_NO_HARDWARE_RESPONSE battery0: <ACPI Control Method Battery> on acpi0 ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc1a84100), AE_NO_HARDWARE_RESPONSE ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc1a84100), AE_NO_HARDWARE_RESPONSE ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc1a84100), AE_NO_HARDWARE_RESPONSE ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc1a84100), AE_NO_HARDWARE_RESPONSE ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc1a84100), AE_NO_HARDWARE_RESPONSE ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc1a84100), AE_NO_HARDWARE_RESPONSE ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc1a84100), AE_NO_HARDWARE_RESPONSE ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc1a84100), AE_NO_HARDWARE_RESPONSE ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc1a84100), AE_NO_HARDWARE_RESPONSE ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc1a84100), AE_NO_HARDWARE_RESPONSE ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc1a84100), AE_NO_HARDWARE_RESPONSE ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc1a84100), AE_NO_HARDWARE_RESPONSE battery1: <ACPI Control Method Battery> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xe0000-0xe1fff,0xe5000-0xe5fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1729014125 Hz quality 800 Timecounters tick every 1.000 msec fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) ad2: 76319MB <IC25N080ATMR04 0 MO4OAD4A> at ata1-master UDMA100 Fix: ??? something with ACPI ... ??? :(