The system is hinged during loading kernel from bootable CDROM (6.1-RELEASE-sparc64-disc1 & 6.1-RELEASE-sparc64-bootonly) The message on console: Booting [/boot/kernel/kernel]... nothing to autoload yet jumping to kernel entry at 0xc0060000 The same problem on the Enterprise 250
On Fri, Dec 22, 2006 at 10:09:06AM +0000, bazylt wrote: > >Environment: > SUN Enterprise 450 > >Description: > The system is hinged during loading kernel from bootable CDROM (6.1-RELEASE-sparc64-disc1 & 6.1-RELEASE-sparc64-bootonly) > The message on console: > Booting [/boot/kernel/kernel]... > nothing to autoload yet > jumping to kernel entry at 0xc0060000 > > The same problem on the Enterprise 250 That's most likely due to using an unsupported video card; with E{2,4}50 your only choices are machfb(4)-compatible cards (i.e. Sun PGX and PGX64, but not PGX32) so far besides a serial console (for E250 this includes the integrated RSC). Marius
State Changed From-To: open->suspended Mark this suspended awaiting someone to add support for his video card.
I have a similar problem with my Blade 2500 when booting 7.2, 7.2- stable (June 2009) and 8.0-current. The machine is equipped with an XVR-100. The only additional PCI card is a LSI SAS3041X-R. OpenBSD-4.5 works fine. Last message is "Jumping to kernel entry 0xc0078000". Regards Andreas
A note, I am seeing the same issue on my Fujistu Primepower 650 machines = with only serial consoles no graphics cards are installed. OpenBSD works fine on the machine as the previous poster mentioned. --=20 Steven C. Peterson
Hello, When trying to boot either release 9.0 or 9.1-rc3 on either Blade 1500 (Silver), 2GB and XVR-600 or Blade-2000, 2GB and Creator 3D Lite the boot hangs after saying Jumping to kernel entry 0xc0098000 AB
Most likely obsoleted in recent versions of FreeBSD. Please let me know if not.