While troubleshooting a DRI issue, I was following the steps at http://dri.freedesktop.org/wiki/DriTroubleshooting. dmesg | grep -i agp returned nothing. I have device agp in my kernel conf. Here's my dmesg: Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE #71: Sat Feb 17 14:54:58 EST 2007 root@laptop.StevenFriedrich.org:/usr/obj/usr/src/sys/LAPTOP Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2793.02-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>> AMD Features=0x20100000<NX,LM> Logical CPUs per core: 2 real memory = 535756800 (510 MB) avail memory = 514760704 (490 MB) ACPI APIC Table: <HP 3082 > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <HP 3082> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x1d> port 0x62,0x66 on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 cpu1: <ACPI CPU> on acpi0 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1800-0x181f irq 23 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x38c0-0x38df irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x38e0-0x38ff irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x3c00-0x3c1f irq 16 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xc8000000-0xc80003ff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci11: <ACPI PCI bus> on pcib3 cbb0: <PCI-CardBus Bridge> at device 0.0 on pci11 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 fwohci0: <1394 Open Host Controller Interface> mem 0xc8208000-0xc82087ff,0xc8200000-0xc8203fff irq 22 at device 0.2 on pci11 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 08:00:28:56:00:0d:3d:b1 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 0a:00:28:0d:3d:b1 fwe0: Ethernet address: 0a:00:28:0d:3d:b1 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc000ffc0, gen=2, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) fwohci0: phy int pci11: <mass storage> at device 0.3 (no driver attached) pci11: <base peripheral> at device 0.4 (no driver attached) rl0: <RealTek 8139 10/100BaseTX> port 0x5000-0x50ff mem 0xc8209400-0xc82094ff irq 20 at device 2.0 on pci11 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:c0:9f:fb:46:48 ndis0: <Broadcom 802.11b/g WLAN> mem 0xc8206000-0xc8207fff irq 17 at device 3.0 on pci11 ndis0: NDIS API version: 5.1 ndis0: Ethernet address: 00:14:a5:2a:a5:db pcm0: <Intel ICH6 (82801FB)> port 0x3000-0x30ff,0x3880-0x38bf mem 0xc8000800-0xc80009ff,0xc8000400-0xc80004ff irq 22 at device 30.2 on pci0 pcm0: <Conexant CX20468-21 AC97 Codec> pci0: <simple comms, generic modem> at device 30.3 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3c40-0x3c4f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 speaker0: <PC speaker> port 0x61 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xdb000-0xdbfff,0xdc000-0xdffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec ad0: 76319MB <Seagate ST9808211A 3.02> at ata0-master UDMA100 acd0: DVDR <HL-DT-ST DVD-RW GWA-4082N/CC15> at ata0-slave PIO4 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad0s2a Here's my scanpci: pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x8086 device 0x2580 Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub pci bus 0x0000 cardnum 0x01 function 0x00: vendor 0x8086 device 0x2581 Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root Port pci bus 0x0000 cardnum 0x1c function 0x00: vendor 0x8086 device 0x2660 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 pci bus 0x0000 cardnum 0x1d function 0x00: vendor 0x8086 device 0x2658 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 pci bus 0x0000 cardnum 0x1d function 0x01: vendor 0x8086 device 0x2659 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 pci bus 0x0000 cardnum 0x1d function 0x02: vendor 0x8086 device 0x265a Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 pci bus 0x0000 cardnum 0x1d function 0x03: vendor 0x8086 device 0x265b Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 pci bus 0x0000 cardnum 0x1d function 0x07: vendor 0x8086 device 0x265c Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller pci bus 0x0000 cardnum 0x1e function 0x00: vendor 0x8086 device 0x244e Intel Corporation 82801 PCI Bridge pci bus 0x0000 cardnum 0x1e function 0x02: vendor 0x8086 device 0x266e Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller pci bus 0x0000 cardnum 0x1e function 0x03: vendor 0x8086 device 0x266d Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller pci bus 0x0000 cardnum 0x1f function 0x00: vendor 0x8086 device 0x2640 Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge pci bus 0x0000 cardnum 0x1f function 0x01: vendor 0x8086 device 0x266f Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller pci bus 0x0000 cardnum 0x1f function 0x03: vendor 0x8086 device 0x266a Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x1002 device 0x3150 ATI Technologies Inc M24 1P [Radeon Mobility X600] pci bus 0x000b cardnum 0x00 function 0x00: vendor 0x104c device 0x8031 Texas Instruments PCIxx21/x515 Cardbus Controller pci bus 0x000b cardnum 0x00 function 0x02: vendor 0x104c device 0x8032 Texas Instruments OHCI Compliant IEEE 1394 Host Controller pci bus 0x000b cardnum 0x00 function 0x03: vendor 0x104c device 0x8033 Texas Instruments PCIxx21 Integrated FlashMedia Controller pci bus 0x000b cardnum 0x00 function 0x04: vendor 0x104c device 0x8034 Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller pci bus 0x000b cardnum 0x02 function 0x00: vendor 0x10ec device 0x8139 Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ pci bus 0x000b cardnum 0x03 function 0x00: vendor 0x14e4 device 0x4318 Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller
Ok, this chipset is a PCI Express, not AGP. But it doesn't enable DRM either. Is it simply unsupported because the PCI signature isn't in the header file? I'm using xorg 7.2 with the only recognized problem being no direct rendering, affecting the speed of GL screensavers... Steven Friedrich
This GPU is now supported by the Radeon KMS kernel driver.