The camera worked fine in 7.0Beta4, but RC1 seems to have a problem. When I attach the camera I see Jan 6 10:58:30 dxeon root: Unknown USB device: vendor 0x054c product 0x0010 bus uhub5 Jan 6 10:58:30 dxeon kernel: umass0: <Sony Sony DSC, class 0/0, rev 2.00/5.00, addr 4> on uhub5 Jan 6 10:58:30 dxeon kernel: da0 at umass-sim0 bus 0 target 0 lun 0 Jan 6 10:58:30 dxeon kernel: da0: <Sony Sony DSC 5.00> Removable Direct Access SCSI-0 device Jan 6 10:58:30 dxeon kernel: da0: 1.000MB/s transfers Jan 6 10:58:30 dxeon kernel: da0: 958MB (1963008 512 byte sectors: 64H 32S/T 958C) Jan 6 10:58:31 dxeon kernel: GEOM_LABEL: Label for provider da0s1 is msdosfs/ . Then I see: Jan 6 10:58:48 dxeon kernel: umass0: CBI reset failed, STALLED If I try to mount the camera: # mount_msdosfs /dev/da0s1 /media/camera/ mount_msdosfs: /dev/da0s1: : Invalid argument %usbdevs -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb1: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 addr 2: full speed, power 100 mA, config 1, product 0x2046(0x2046), vendor 0x0451(0x0451), rev 1.25 port 1 powered port 2 powered port 3 addr 4: full speed, self powered, config 1, Sony DSC(0x0010), Sony(0x054c), rev 5.00 port 4 addr 3: low speed, power 98 mA, config 1, USB-PS/2 Optical Mouse(0xc043), Logitech(0x046d), rev 27.20 port 2 powered Controller /dev/usb2: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb3: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 powered port 3 powered port 4 addr 2: high speed, power 100 mA, config 1, product 0x0234(0x0234), vendor 0x050d(0x050d), rev 1.00 port 1 powered port 2 powered port 3 powered port 4 powered port 5 powered port 6 powered %camcontrol devlist <PIONEER DVD-RW DVR-111D 1.23> at scbus1 target 1 lun 0 (cd0,pass0) <Sony Sony DSC 5.00> at scbus2 target 0 lun 0 (da0,pass1) %dmesg Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-PRERELEASE #7: Sun Dec 30 12:43:52 CST 2007 derek@dxeon:/usr/obj/usr/src/sys/dxeon Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 3.06GHz (3065.81-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4400<CNXT-ID,xTPR> real memory = 1073676288 (1023 MB) avail memory = 1032912896 (985 MB) ACPI APIC Table: <IntelR AWRDACPI> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 6 ioapic0: Changing APIC ID to 4 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard ioapic2 <Version 2.0> irqs 48-71 on motherboard kbd1 at kbdmux0 acpi0: <IntelR AWRDACPI> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 3fef0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 p4tcc1: <CPU Frequency Thermal Control> on cpu1 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <unknown> at device 0.1 (no driver attached) pcib1: <PCI-PCI bridge> mem 0xd0000000-0xdfffffff at device 1.0 on pci0 pci1: <PCI bus> on pcib1 nvidia0: <Unknown> mem 0xf0000000-0xf0ffffff,0xe0000000-0xefffffff,0xf1000000-0xf1ffffff irq 16 at device 0.0 on pci1 nvidia0: [GIANT-LOCKED] nvidia0: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci2 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 31.0 on pci2 pci4: <ACPI PCI bus> on pcib4 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xd800-0xd81f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xd000-0xd01f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xd400-0xd41f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xf3200000-0xf32003ff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 uhub3: 6 ports with 6 removable, self powered uhub4: <vendor 0x050d product 0x0234, class 9/0, rev 2.00/1.00, addr 2> on uhub3 uhub4: single transaction translator uhub4: 4 ports with 4 removable, bus powered pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib5 em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0xc000-0xc03f mem 0xf3100000-0xf311ffff irq 19 at device 4.0 on pci5 em0: Ethernet address: 00:d0:68:02:65:d4 em0: [FILTER] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel ICH4 (82801DB)> port 0xe000-0xe0ff,0xe400-0xe43f mem 0xf3201000-0xf32011ff,0xf3202000-0xf32020ff irq 17 at device 31.5 on pci0 pcm0: [ITHREAD] pcm0: <Analog Devices AD1981B AC97 Codec> acpi_tz0: <Thermal Zone> on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A sio1: [FILTER] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 ppi0: <Parallel I/O> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 uhub5: <vendor 0x0451 product 0x2046, class 9/0, rev 1.10/1.25, addr 2> on uhub1 uhub5: 4 ports with 4 removable, bus powered ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/27.20, addr 3> on uhub5 ums0: 8 buttons and Z dir. Timecounters tick every 1.000 msec ad0: 152627MB <Seagate ST3160023A 8.01> at ata0-master UDMA100 ad1: 190782MB <WDC WD2000BB-00DAA0 65.13G65> at ata0-slave UDMA100 ad2: 39205MB <Maxtor 6E040L0 NAR61590> at ata1-master UDMA100 acd0: DVDR <PIONEER DVD-RW DVR-111D/1.23> at ata1-slave UDMA66 SMP: AP CPU #1 Launched! How-To-Repeat: Plug in a Sony DSC-W1 and try to use it.
For bugs matching the following criteria: Status: In Progress Changed: (is less than) 2014-06-01 Reset to default assignee and clear in-progress tags. Mail being skipped