Bug 120296 - [ata] Unstable SATA on MB with Nvidia MCP 570 SLI chipset [regression]
Summary: [ata] Unstable SATA on MB with Nvidia MCP 570 SLI chipset [regression]
Status: Open
Alias: None
Product: Base System
Classification: Unclassified
Component: kern (show other bugs)
Version: Unspecified
Hardware: Any Any
: Normal Affects Only Me
Assignee: freebsd-bugs (Nobody)
URL:
Keywords:
Depends on:
Blocks:
 
Reported: 2008-02-05 17:20 UTC by Morten Strårup
Modified: 2017-12-31 22:35 UTC (History)
0 users

See Also:


Attachments

Note You need to log in before you can comment on or make changes to this bug.
Description Morten Strårup 2008-02-05 17:20:01 UTC
I've been running 7.0-current since april or so without any significant
trouble but now I've run into quite a showstopper.

Until now the hardware used has been a Via C7 1,2 GHz mini-itx system
with 1 GB of RAM. But I've now bought some new hardware for use as a
fileserver and this new hardware doesn't work very well with 7.0. It
consists of an AMD BE2400 cpu, an MSI K9N SLI MCP motherboard with an
Nforce 570 SLI chipset and 4 GB of RAM.

I've run both memtest86 and merseine prime test to make sure that it isn't
the hardware that is faulty. I've tried changing the memory modules but
that didn't help.

Other operating systems like Ubuntu Linux 7.10, NetBSD 4.0 and Freebsd
6.3 RC1 work just fine, but FreeBSD 7.0 does not. These have all been
AMD64 versions. I've also tested 8.0-current which doesn't work either.
I've tested the 7.0 and 8.0 installations with both AMD64 and i386
installations and none work.

For the AMD64 versions the errors consist of:

1. Errors about wrong fileformat when loading shared libraries.
2. Errors about missing symbol table.
3. Errors about not being able to load /etc/termcap when logging in.
4. Errors about relocations when loading shared libraries.
5. Errors about init making an error and then dumping me to singleuser
   and then not being able to load sh because of fileformat errors.

For the i386 versions the errors start when loading the BTX, where it
complains about missing acpi modules and then crashes with a list of what
the cpu registers contain.

The AMD64 errors sometimes also show up when installing the 7.0-BETA4.

How-To-Repeat: Install FreeBSD with disks connected to motherboard chipset, errors will
show up when booting the machine from disk.
Comment 1 Morten Strårup 2008-02-05 17:46:35 UTC
Output of pci-conf -lv:

none0@pci0:0:0:0:       class=0x050000 card=0x72501462 chip=0x036910de 
rev=0xa2 hdr=0x00
   vendor     = 'Nvidia Corp'
   device     = 'MCP55 Memory Controller'
   class      = memory
   subclass   = RAM
isab0@pci0:0:1:0:       class=0x060100 card=0x72501462 chip=0x036010de 
rev=0xa3 hdr=0x00
   vendor     = 'Nvidia Corp'
   device     = 'MCP55 LPC Bridge'
   class      = bridge
   subclass   = PCI-ISA
none1@pci0:0:1:1:       class=0x0c0500 card=0x72501462 chip=0x036810de 
rev=0xa3 hdr=0x00
   vendor     = 'Nvidia Corp'
   device     = 'MCP55 SMBus'
   class      = serial bus
   subclass   = SMBus
ohci0@pci0:0:2:0:       class=0x0c0310 card=0x72501462 chip=0x036c10de 
rev=0xa1 hdr=0x00
   vendor     = 'Nvidia Corp'
   device     = 'MCP55 USB Controller'
   class      = serial bus
   subclass   = USB
ehci0@pci0:0:2:1:       class=0x0c0320 card=0x72501462 chip=0x036d10de 
rev=0xa2 hdr=0x00
   vendor     = 'Nvidia Corp'
   device     = 'MCP55 USB Controller'
   class      = serial bus
   subclass   = USB
atapci0@pci0:0:4:0:     class=0x01018a card=0x72501462 chip=0x036e10de 
rev=0xa1 hdr=0x00
   vendor     = 'Nvidia Corp'
   device     = 'MCP55 IDE'
   class      = mass storage
   subclass   = ATA
atapci1@pci0:0:5:0:     class=0x010185 card=0x72501462 chip=0x037f10de 
rev=0xa3 hdr=0x00
   vendor     = 'Nvidia Corp'
   device     = 'MCP55 SATA Controller'
   class      = mass storage
   subclass   = ATA
atapci2@pci0:0:5:1:     class=0x010185 card=0x72501462 chip=0x037f10de 
rev=0xa3 hdr=0x00
   vendor     = 'Nvidia Corp'
   device     = 'MCP55 SATA Controller'
   class      = mass storage
   subclass   = ATA
atapci3@pci0:0:5:2:     class=0x010185 card=0x72501462 chip=0x037f10de 
rev=0xa3 hdr=0x00
   vendor     = 'Nvidia Corp'
   device     = 'MCP55 SATA Controller'
   class      = mass storage
   subclass   = ATA
pcib1@pci0:0:6:0:       class=0x060401 card=0x72501462 chip=0x037010de 
rev=0xa2 hdr=0x01
   vendor     = 'Nvidia Corp'
   device     = 'MCP55 PCI bridge'
   class      = bridge
   subclass   = PCI-PCI
none2@pci0:0:6:1:       class=0x040300 card=0x72501462 chip=0x037110de 
rev=0xa2 hdr=0x00
   vendor     = 'Nvidia Corp'
   device     = 'ADI 1988B 8 Channel High Definition Audio'
   class      = multimedia
nfe0@pci0:0:8:0:        class=0x068000 card=0x72501462 chip=0x037310de 
rev=0xa3 hdr=0x00
   vendor     = 'Nvidia Corp'
   device     = 'MCP55 Ethernet'
   class      = bridge
nfe1@pci0:0:9:0:        class=0x068000 card=0x72501462 chip=0x037310de 
rev=0xa3 hdr=0x00
   vendor     = 'Nvidia Corp'
   device     = 'MCP55 Ethernet'
   class      = bridge
pcib2@pci0:0:10:0:      class=0x060400 card=0x000010de chip=0x037610de 
rev=0xa3 hdr=0x01
   vendor     = 'Nvidia Corp'
   device     = 'MCP55 PCIe bridge'
   class      = bridge
   subclass   = PCI-PCI
pcib3@pci0:0:11:0:      class=0x060400 card=0x000010de chip=0x037410de 
rev=0xa3 hdr=0x01
   vendor     = 'Nvidia Corp'
   device     = 'MCP55 PCIe bridge'
   class      = bridge
   subclass   = PCI-PCI
pcib4@pci0:0:12:0:      class=0x060400 card=0x000010de chip=0x037410de 
rev=0xa3 hdr=0x01
   vendor     = 'Nvidia Corp'
   device     = 'MCP55 PCIe bridge'
   class      = bridge
   subclass   = PCI-PCI
pcib5@pci0:0:13:0:      class=0x060400 card=0x000010de chip=0x037810de 
rev=0xa3 hdr=0x01
   vendor     = 'Nvidia Corp'
   device     = 'MCP55 PCIe bridge'
   class      = bridge
   subclass   = PCI-PCI
pcib6@pci0:0:14:0:      class=0x060400 card=0x000010de chip=0x037510de 
rev=0xa3 hdr=0x01
   vendor     = 'Nvidia Corp'
   device     = 'MCP55 PCIe bridge'
   class      = bridge
   subclass   = PCI-PCI
pcib7@pci0:0:15:0:      class=0x060400 card=0x000010de chip=0x037710de 
rev=0xa3 hdr=0x01
   vendor     = 'Nvidia Corp'
   device     = 'MCP55 PCIe bridge'
   class      = bridge
   subclass   = PCI-PCI
hostb0@pci0:0:24:0:     class=0x060000 card=0x00000000 chip=0x11001022 
rev=0x00 hdr=0x00
   vendor     = 'Advanced Micro Devices (AMD)'
   device     = '(K8) Athlon 64/Opteron HyperTransport Technology 
Configuration'
   class      = bridge
   subclass   = HOST-PCI
hostb1@pci0:0:24:1:     class=0x060000 card=0x00000000 chip=0x11011022 
rev=0x00 hdr=0x00
   vendor     = 'Advanced Micro Devices (AMD)'
   device     = '(K8) Athlon 64/Opteron Address Map'
   class      = bridge
   subclass   = HOST-PCI
hostb2@pci0:0:24:2:     class=0x060000 card=0x00000000 chip=0x11021022 
rev=0x00 hdr=0x00
   vendor     = 'Advanced Micro Devices (AMD)'
   device     = '(K8) Athlon 64/Opteron DRAM Controller'
   class      = bridge
   subclass   = HOST-PCI
hostb3@pci0:0:24:3:     class=0x060000 card=0x00000000 chip=0x11031022 
rev=0x00 hdr=0x00
   vendor     = 'Advanced Micro Devices (AMD)'
   device     = '(K8) Athlon 64/Opteron Miscellaneous Control'
   class      = bridge
   subclass   = HOST-PCI
atapci4@pci0:1:0:0:     class=0x010400 card=0x71141095 chip=0x31141095 
rev=0x02 hdr=0x00
   vendor     = 'Silicon Image Inc (Was: CMD Technology Inc)'
   device     = 'Sil 3114 SATALink/SATARaid Controller'
   class      = mass storage
   subclass   = RAID
vgapci0@pci0:1:1:0:     class=0x030000 card=0x00000000 chip=0x0519102b 
rev=0x01 hdr=0x00
   vendor     = 'Matrox Electronic Systems Ltd.'
   device     = 'MGA-2064W Storm (Millennium board)'
   class      = display
   subclass   = VGA
Comment 2 Morten Strårup 2008-02-05 19:31:21 UTC
I've also posted on the currentlist back in December regarding my 
problem. Below is the link to the thread.

http://lists.freebsd.org/pipermail/freebsd-current/2007-December/081541.html
Comment 3 Andrey V. Elsukov 2008-02-06 05:48:04 UTC
Morten Strårup wrote:
>> How-To-Repeat:
> Install FreeBSD with disks connected to motherboard chipset, errors
> will show up when booting the machine from disk.

Can you show a verbose dmesg from 7.0 or CURRENT?

-- 
WBR, Andrey V. Elsukov
Comment 4 Morten Strårup 2008-02-06 16:18:30 UTC
Here is my dmesg, the kernel is one compiled yesterday from the at that 
point latest RELENG_7 sources.

I'm using a Sil3114 sata controller for the disks at the moment, so that 
the machine is usable.


Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-PRERELEASE #1: Wed Feb  6 00:09:43 CET 2008
    root@nas.lightworkings:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) X2 Dual Core Processor BE-2400 (2300.02-MHz K8-class 
CPU)
  Origin = "AuthenticAMD"  Id = 0x60fb2  Stepping = 2
  
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
  Cores per package: 2
usable memory = 4282007552 (4083 MB)
avail memory  = 4118200320 (3927 MB)
ACPI APIC Table: <MSIISM OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb  6 2008 00:09:35)
acpi0: <MSIISM OEMRSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of fec00000, 1000 (3) failed
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x2008-0x200b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on 
acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x2f00-0x2f7f at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfeafb000-0xfeafbfff irq 22 
at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfeafac00-0xfeafacff irq 
23 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 4.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 controller> port 
0xd480-0xd487,0xd400-0xd403,0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc0f 
mem 0xfeaf9000-0xfeaf9fff irq 21 at device 5.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP55 SATA300 controller> port 
0xc880-0xc887,0xc800-0xc803,0xc480-0xc487,0xc400-0xc403,0xc080-0xc08f 
mem 0xfeaf8000-0xfeaf8fff irq 22 at device 5.1 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]
atapci3: <nVidia nForce MCP55 SATA300 controller> port 
0xc000-0xc007,0xbc00-0xbc03,0xb880-0xb887,0xb800-0xb803,0xb480-0xb48f 
mem 0xfeaf7000-0xfeaf7fff irq 23 at device 5.2 on pci0
atapci3: [ITHREAD]
ata6: <ATA channel 0> on atapci3
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci3
ata7: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
atapci4: <SiI SiI 3114 SATA150 controller> port 
0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f 
mem 0xfebffc00-0xfebfffff irq 16 at device 0.0 on pci1
atapci4: [ITHREAD]
ata8: <ATA channel 0> on atapci4
ata8: [ITHREAD]
ata9: <ATA channel 1> on atapci4
ata9: [ITHREAD]
ata10: <ATA channel 2> on atapci4
ata10: [ITHREAD]
ata11: <ATA channel 3> on atapci4
ata11: [ITHREAD]
vgapci0: <VGA-compatible display> mem 
0xfebf8000-0xfebfbfff,0xfd800000-0xfdffffff irq 17 at device 1.0 on pci1
fwohci0: <VIA Fire II (VT6306)> port 0xe080-0xe0ff mem 
0xfebff000-0xfebff7ff irq 18 at device 4.0 on pci1
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:10:dc:00:01:07:3b:4e
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x13dc000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:10:dc:07:3b:4e
fwe0: Ethernet address: 02:10:dc:07:3b:4e
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:10:dc:00:01:07:3b:4e @ 0xfffe00000000, S400, 
maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
pci0: <multimedia> at device 6.1 (no driver attached)
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb400-0xb407 mem 
0xfeaf6000-0xfeaf6fff,0xfeafa800-0xfeafa8ff,0xfeafa400-0xfeafa40f irq 20 
at device 8.0 on pci0
miibus0: <MII bus> on nfe0
ciphy0: <Vitesse VSC8601 10/100/1000TX PHY> PHY 0 on miibus0
ciphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
nfe0: Ethernet address: 00:19:db:cf:4c:c2
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xb080-0xb087 mem 
0xfeaf5000-0xfeaf5fff,0xfeafa000-0xfeafa0ff,0xfeaf4c00-0xfeaf4c0f irq 20 
at device 9.0 on pci0
miibus1: <MII bus> on nfe1
ciphy1: <Vitesse VSC8601 10/100/1000TX PHY> PHY 1 on miibus1
ciphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
nfe1: Ethernet address: 00:19:db:cf:65:95
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci7: <ACPI PCI bus> on pcib7
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on 
acpi0
sio0: type 16550A
sio0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xccfff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
hptrr: no controller detected.firewire0: 1 nodes, maxhop <= 0, cable IRM 
= 0 (me)
firewire0: bus manager 0 (me)

ad16: 114473MB <FUJITSU MHW2120BH 00810013> at ata8-master SATA150
ad18: 476940MB <WDC WD5000AAKS-00YGA0 12.01C02> at ata9-master SATA150
ad20: 476940MB <WDC WD5000AAKS-00YGA0 12.01C02> at ata10-master SATA150
ad22: 476940MB <WDC WD5000AAKS-00YGA0 12.01C02> at ata11-master SATA150
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad16s1a
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
ZFS filesystem version 6
ZFS storage pool version 6
nfe0: link state changed to UP
Comment 5 Morten Strårup 2008-02-07 21:16:01 UTC
Here it is again. Hopefully this time with all the info needed. There is 
a 250 GB seagate disk connected to the nforce sata controller.

nas# dmesg
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-PRERELEASE #1: Wed Feb  6 00:09:43 CET 2008
    root@nas.lightworkings:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80bc8000.
Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 
0xffffffff80bc81e8.
Calibrating clock(s) ... i8254 clock: 1193271 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2300017027 Hz
CPU: AMD Athlon(tm) X2 Dual Core Processor BE-2400 (2300.02-MHz K8-class 
CPU)
  Origin = "AuthenticAMD"  Id = 0x60fb2  Stepping = 2
  
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
  Cores per package: 2
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way 
associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
usable memory = 4282007552 (4083 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages)
0x0000000000cc6000 - 0x00000000c70f9fff, 3326296064 bytes (812084 pages)
0x0000000100000000 - 0x000000012ffeffff, 805240832 bytes (196592 pages)
avail memory  = 4118200320 (3927 MB)
ACPI APIC Table: <MSIISM OEMAPIC >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
ACPI: RSDP @ 0x0xf92b0/0x0014 (v  0 ACPIAM)
ACPI: RSDT @ 0x0xcffd0000/0x003C (v  1 MSIISM OEMRSDT  0x10000704 MSFT 
0x00000097)
ACPI: FACP @ 0x0xcffd0200/0x0084 (v  2 MSIISM OEMFACP  0x10000704 MSFT 
0x00000097)
ACPI: DSDT @ 0x0xcffd0440/0x5045 (v  1  1ADGH 1ADGH013 0x00000013 INTL 
0x20051117)
ACPI: FACS @ 0x0xcffde000/0x0040
ACPI: APIC @ 0x0xcffd0390/0x0070 (v  1 MSIISM OEMAPIC  0x10000704 MSFT 
0x00000097)
ACPI: MCFG @ 0x0xcffd0400/0x003C (v  1 MSIISM OEMMCFG  0x10000704 MSFT 
0x00000097)
ACPI: OEMB @ 0x0xcffde040/0x0061 (v  1 MSIISM AMI_OEM  0x10000704 MSFT 
0x00000097)
ACPI: HPET @ 0x0xcffd5490/0x0038 (v  1 MSIISM OEMHPET0 0x10000704 MSFT 
0x00000097)
ACPI: SSDT @ 0x0xcffd54d0/0x0248 (v  1 A M I  POWERNOW 0x00000001 AMD  
0x00000001)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
MADT: Interrupt override: source 14, irq 14
MADT: Interrupt override: source 15, irq 15
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb  6 2008 00:09:35)
acpi0: <MSIISM OEMRSDT> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIMC -> bus 0 dev 1 func 0
acpi0: reservation of fec00000, 1000 (3) failed
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x2008-0x200b on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  16 17 18 19
  Validation          0  255   N     0  16 17 18 19
  After Disable       0  255   N     0  16 17 18 19
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  16 17 18 19
  Validation          0  255   N     0  16 17 18 19
  After Disable       0  255   N     0  16 17 18 19
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19
  Validation          0  255   N     0  16 17 18 19
  After Disable       0  255   N     0  16 17 18 19
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  16 17 18 19
  Validation          0  255   N     0  16 17 18 19
  After Disable       0  255   N     0  16 17 18 19
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19
  Validation          0  255   N     0  16 17 18 19
  After Disable       0  255   N     0  16 17 18 19
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19
  Validation          0  255   N     0  16 17 18 19
  After Disable       0  255   N     0  16 17 18 19
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19
  Validation          0  255   N     0  16 17 18 19
  After Disable       0  255   N     0  16 17 18 19
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19
  Validation          0  255   N     0  16 17 18 19
  After Disable       0  255   N     0  16 17 18 19
pci_link8:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    7   N     0  21 22 23
  Validation          0  255   N     0  21 22 23
  After Disable       0  255   N     0  21 22 23
pci_link9:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  20
  Validation          0  255   N     0  20
  After Disable       0  255   N     0  20
pci_link10:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  21 22 23
  Validation          0  255   N     0  21 22 23
  After Disable       0  255   N     0  21 22 23
pci_link11:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  20
  Validation          0  255   N     0  20
  After Disable       0  255   N     0  20
pci_link12:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  21 22 23
  Validation          0  255   N     0  21 22 23
  After Disable       0  255   N     0  21 22 23
pci_link13:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  21 22 23
  Validation          0  255   N     0  21 22 23
  After Disable       0  255   N     0  21 22 23
pci_link14:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  21 22 23
  Validation          0  255   N     0  21 22 23
  After Disable       0  255   N     0  21 22 23
pci_link15:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  21 22 23
  Validation          0  255   N     0  21 22 23
  After Disable       0  255   N     0  21 22 23
pci_link16:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  21 22 23
  Validation          0  255   N     0  21 22 23
  After Disable       0  255   N     0  21 22 23
pci_link17:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  21 22 23
  Validation          0  255   N     0  21 22 23
  After Disable       0  255   N     0  21 22 23
pci_link18:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  21 22 23
  Validation          0  255   N     0  21 22 23
  After Disable       0  255   N     0  21 22 23
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on 
acpi0
acpi_hpet0: vend: 0x10de rev: 0x1 num: 2 hz: 25000000 opts: legacy_route
Timecounter "HPET" frequency 25000000 Hz quality 900
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x10de, dev=0x0369, revid=0xa2
        domain=0, bus=0, slot=0, func=0
        class=05-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0106, statreg=0x00b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0360, revid=0xa3
        domain=0, bus=0, slot=1, func=0
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        map[10]: type I/O Port, range 32, base rx2f00, size  7, enabled
found-> vendor=0x10de, dev=0x0368, revid=0xa3
        domain=0, bus=0, slot=1, func=1
        class=0c-05-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D3  current D0
        map[10]: type I/O Port, range 32, base rx2900, size  6, enabled
        map[20]: type I/O Port, range 32, base rx2d00, size  6, enabled
        map[24]: type I/O Port, range 32, base rx2e00, size  6, enabled
pcib0: matched entry for 0.1.INTA (src \\_SB_.LSMB:0)
pci_link13: Picked IRQ 21 with weight 0
pcib0: slot 1 INTA routed to irq 21 via \\_SB_.LSMB
found-> vendor=0x10de, dev=0x036c, revid=0xa1
        domain=0, bus=0, slot=2, func=0
        class=0c-03-10, hdrtype=0x00, mfdev=1
        cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
        intpin=a, irq=7
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type Memory, range 32, base rxfeafb000, size 12, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.LUB0:0)
pci_link8: Picked IRQ 22 with weight 0
pcib0: slot 2 INTA routed to irq 22 via \\_SB_.LUB0
found-> vendor=0x10de, dev=0x036d, revid=0xa2
        domain=0, bus=0, slot=2, func=1
        class=0c-03-20, hdrtype=0x00, mfdev=1
        cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
        intpin=b, irq=10
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type Memory, range 32, base rxfeafac00, size  8, enabled
pcib0: matched entry for 0.2.INTB (src \\_SB_.LUB2:0)
pci_link10: Picked IRQ 23 with weight 0
pcib0: slot 2 INTB routed to irq 23 via \\_SB_.LUB2
found-> vendor=0x10de, dev=0x036e, revid=0xa1
        domain=0, bus=0, slot=4, func=0
        class=01-01-8a, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
        powerspec 2  supports D0 D3  current D0
        map[20]: type I/O Port, range 32, base rxffa0, size  4, enabled
found-> vendor=0x10de, dev=0x037f, revid=0xa3
        domain=0, bus=0, slot=5, func=0
        class=01-01-85, hdrtype=0x00, mfdev=1
        cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D3  current D0
        MSI supports 4 messages, 64 bit
        map[10]: type I/O Port, range 32, base rxd480, size  3, enabled
        map[14]: type I/O Port, range 32, base rxd400, size  2, enabled
        map[18]: type I/O Port, range 32, base rxd080, size  3, enabled
        map[1c]: type I/O Port, range 32, base rxd000, size  2, enabled
        map[20]: type I/O Port, range 32, base rxcc00, size  4, enabled
        map[24]: type Memory, range 32, base rxfeaf9000, size 12, enabled
pcib0: matched entry for 0.5.INTA (src \\_SB_.LSA0:0)
pci_link15: Picked IRQ 21 with weight 1
pcib0: slot 5 INTA routed to irq 21 via \\_SB_.LSA0
found-> vendor=0x10de, dev=0x037f, revid=0xa3
        domain=0, bus=0, slot=5, func=1
        class=01-01-85, hdrtype=0x00, mfdev=1
        cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
        intpin=b, irq=5
        powerspec 2  supports D0 D3  current D0
        MSI supports 4 messages, 64 bit
        map[10]: type I/O Port, range 32, base rxc880, size  3, enabled
        map[14]: type I/O Port, range 32, base rxc800, size  2, enabled
        map[18]: type I/O Port, range 32, base rxc480, size  3, enabled
        map[1c]: type I/O Port, range 32, base rxc400, size  2, enabled
        map[20]: type I/O Port, range 32, base rxc080, size  4, enabled
        map[24]: type Memory, range 32, base rxfeaf8000, size 12, enabled
pcib0: matched entry for 0.5.INTB (src \\_SB_.LSA1:0)
pci_link16: Picked IRQ 22 with weight 1
pcib0: slot 5 INTB routed to irq 22 via \\_SB_.LSA1
found-> vendor=0x10de, dev=0x037f, revid=0xa3
        domain=0, bus=0, slot=5, func=2
        class=01-01-85, hdrtype=0x00, mfdev=1
        cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
        intpin=c, irq=10
        powerspec 2  supports D0 D3  current D0
        MSI supports 4 messages, 64 bit
        map[10]: type I/O Port, range 32, base rxc000, size  3, enabled
        map[14]: type I/O Port, range 32, base rxbc00, size  2, enabled
        map[18]: type I/O Port, range 32, base rxb880, size  3, enabled
        map[1c]: type I/O Port, range 32, base rxb800, size  2, enabled
        map[20]: type I/O Port, range 32, base rxb480, size  4, enabled
        map[24]: type Memory, range 32, base rxfeaf7000, size 12, enabled
pcib0: matched entry for 0.5.INTC (src \\_SB_.LSA2:0)
pci_link18: Picked IRQ 23 with weight 1
pcib0: slot 5 INTC routed to irq 23 via \\_SB_.LSA2
found-> vendor=0x10de, dev=0x0370, revid=0xa2
        domain=0, bus=0, slot=6, func=0
        class=06-04-01, hdrtype=0x01, mfdev=1
        cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x02 (500 ns)
found-> vendor=0x10de, dev=0x0371, revid=0xa2
        domain=0, bus=0, slot=6, func=1
        class=04-03-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
        intpin=b, irq=10
        powerspec 2  supports D0 D3  current D0
        MSI supports 1 message, 64 bit, vector masks
        map[10]: type Memory, range 32, base rxfeaf0000, size 14, enabled
pcib0: matched entry for 0.6.INTB (src \\_SB_.LAZA:0)
pci_link12: Picked IRQ 21 with weight 2
pcib0: slot 6 INTB routed to irq 21 via \\_SB_.LAZA
found-> vendor=0x10de, dev=0x0373, revid=0xa3
        domain=0, bus=0, slot=8, func=0
        class=06-80-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
        MSI supports 8 messages, 64 bit, vector masks
        MSI-X supports 8 messages in maps 0x18 and 0x1c
        map[10]: type Memory, range 32, base rxfeaf6000, size 12, enabled
        map[14]: type I/O Port, range 32, base rxb400, size  3, enabled
        map[18]: type Memory, range 32, base rxfeafa800, size  8, enabled
        map[1c]: type Memory, range 32, base rxfeafa400, size  4, enabled
pcib0: matched entry for 0.8.INTA (src \\_SB_.LMAC:0)
pci_link11: Picked IRQ 20 with weight 0
pcib0: slot 8 INTA routed to irq 20 via \\_SB_.LMAC
found-> vendor=0x10de, dev=0x0373, revid=0xa3
        domain=0, bus=0, slot=9, func=0
        class=06-80-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
        intpin=a, irq=5
        powerspec 2  supports D0 D1 D2 D3  current D0
        MSI supports 8 messages, 64 bit, vector masks
        MSI-X supports 8 messages in maps 0x18 and 0x1c
        map[10]: type Memory, range 32, base rxfeaf5000, size 12, enabled
        map[14]: type I/O Port, range 32, base rxb080, size  3, enabled
        map[18]: type Memory, range 32, base rxfeafa000, size  8, enabled
        map[1c]: type Memory, range 32, base rxfeaf4c00, size  4, enabled
pcib0: matched entry for 0.9.INTA (src \\_SB_.LMAD:0)
pci_link9: Picked IRQ 20 with weight 1
pcib0: slot 9 INTA routed to irq 20 via \\_SB_.LMAD
found-> vendor=0x10de, dev=0x0376, revid=0xa3
        domain=0, bus=0, slot=10, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
        powerspec 2  supports D0 D3  current D0
        MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0374, revid=0xa3
        domain=0, bus=0, slot=11, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
        powerspec 2  supports D0 D3  current D0
        MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0374, revid=0xa3
        domain=0, bus=0, slot=12, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
        powerspec 2  supports D0 D3  current D0
        MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0378, revid=0xa3
        domain=0, bus=0, slot=13, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
        powerspec 2  supports D0 D3  current D0
        MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0375, revid=0xa3
        domain=0, bus=0, slot=14, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
        powerspec 2  supports D0 D3  current D0
        MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0377, revid=0xa3
        domain=0, bus=0, slot=15, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
        powerspec 2  supports D0 D3  current D0
        MSI supports 2 messages, 64 bit
found-> vendor=0x1022, dev=0x1100, revid=0x00
        domain=0, bus=0, slot=24, func=0
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
        domain=0, bus=0, slot=24, func=1
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
        domain=0, bus=0, slot=24, func=2
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
        domain=0, bus=0, slot=24, func=3
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x2f00-0x2f7f at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfeafb000-0xfeafbfff irq 22 
at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeafb000
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 49
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfeafac00-0xfeafacff irq 
23 at device 2.1 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfeafac00
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 50
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 4.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=60 ostat1=70
ata0: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata0: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata0: reset tp2 stat0=20 stat1=30 devices=0x0
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 51
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 52
ata1: [MPSAFE]
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 controller> port 
0xd480-0xd487,0xd400-0xd403,0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc0f 
mem 0xfeaf9000-0xfeaf9fff irq 21 at device 5.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xcc00
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 53
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfeaf9000
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd480
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd400
ata2: SATA connect time=0ms
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xd080
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xd000
ata3: SATA connect status=00000000
ata3: [MPSAFE]
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP55 SATA300 controller> port 
0xc880-0xc887,0xc800-0xc803,0xc480-0xc487,0xc400-0xc403,0xc080-0xc08f 
mem 0xfeaf8000-0xfeaf8fff irq 22 at device 5.1 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc080
atapci2: [MPSAFE]
atapci2: [ITHREAD]
atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfeaf8000
ata4: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xc880
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xc800
ata4: SATA connect status=00000000
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0xc480
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xc400
ata5: SATA connect status=00000000
ata5: [MPSAFE]
ata5: [ITHREAD]
atapci3: <nVidia nForce MCP55 SATA300 controller> port 
0xc000-0xc007,0xbc00-0xbc03,0xb880-0xb887,0xb800-0xb803,0xb480-0xb48f 
mem 0xfeaf7000-0xfeaf7fff irq 23 at device 5.2 on pci0
atapci3: Reserved 0x10 bytes for rid 0x20 type 4 at 0xb480
atapci3: [MPSAFE]
atapci3: [ITHREAD]
atapci3: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfeaf7000
ata6: <ATA channel 0> on atapci3
atapci3: Reserved 0x8 bytes for rid 0x10 type 4 at 0xc000
atapci3: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbc00
ata6: SATA connect status=00000000
ata6: [MPSAFE]
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci3
atapci3: Reserved 0x8 bytes for rid 0x18 type 4 at 0xb880
atapci3: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb800
ata7: SATA connect status=00000000
ata7: [MPSAFE]
ata7: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xe000-0xefff
pcib1:   memory decode     0xfeb00000-0xfebfffff
pcib1:   prefetched decode 0xfd800000-0xfdffffff
pcib1:   Subtractively decoded bridge.
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1095, dev=0x3114, revid=0x02
        domain=0, bus=1, slot=0, func=0
        class=01-04-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0107, statreg=0x02b0, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type I/O Port, range 32, base rxec00, size  3, enabled
pcib1: requested I/O range 0xec00-0xec07: in range
        map[14]: type I/O Port, range 32, base rxe880, size  2, enabled
pcib1: requested I/O range 0xe880-0xe883: in range
        map[18]: type I/O Port, range 32, base rxe800, size  3, enabled
pcib1: requested I/O range 0xe800-0xe807: in range
        map[1c]: type I/O Port, range 32, base rxe480, size  2, enabled
pcib1: requested I/O range 0xe480-0xe483: in range
        map[20]: type I/O Port, range 32, base rxe400, size  4, enabled
pcib1: requested I/O range 0xe400-0xe40f: in range
        map[24]: type Memory, range 32, base rxfebffc00, size 10, enabled
pcib1: requested memory range 0xfebffc00-0xfebfffff: good
pcib1: matched entry for 1.0.INTA (src \\_SB_.LNKA:0)
pci_link0: Picked IRQ 16 with weight 0
pcib1: slot 0 INTA routed to irq 16 via \\_SB_.LNKA
found-> vendor=0x102b, dev=0x0519, revid=0x01
        domain=0, bus=1, slot=1, func=0
        class=03-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0083, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        map[10]: type Memory, range 32, base rxfebf8000, size 14, enabled
pcib1: requested memory range 0xfebf8000-0xfebfbfff: good
        map[14]: type Prefetchable Memory, range 32, base rxfd800000, 
size 23, enabled
pcib1: requested memory range 0xfd800000-0xfdffffff: good
pcib1: matched entry for 1.1.INTA (src \\_SB_.LNKB:0)
pci_link1: Picked IRQ 17 with weight 0
pcib1: slot 1 INTA routed to irq 17 via \\_SB_.LNKB
found-> vendor=0x1106, dev=0x3044, revid=0x80
        domain=0, bus=1, slot=4, func=0
        class=0c-00-10, hdrtype=0x00, mfdev=0
        cmdreg=0x0117, statreg=0x0210, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D2 D3  current D0
        map[10]: type Memory, range 32, base rxfebff000, size 11, enabled
pcib1: requested memory range 0xfebff000-0xfebff7ff: good
        map[14]: type I/O Port, range 32, base rxe080, size  7, enabled
pcib1: requested I/O range 0xe080-0xe0ff: in range
pcib1: matched entry for 1.4.INTA (src \\_SB_.LNKD:0)
pci_link3: Picked IRQ 18 with weight 0
pcib1: slot 4 INTA routed to irq 18 via \\_SB_.LNKD
atapci4: <SiI SiI 3114 SATA150 controller> port 
0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f 
mem 0xfebffc00-0xfebfffff irq 16 at device 0.0 on pci1
atapci4: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe400
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 54
atapci4: [MPSAFE]
atapci4: [ITHREAD]
atapci4: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfebffc00
ata8: <ATA channel 0> on atapci4
ata8: SATA connect time=0ms
ata8: reset tp1 mask=01 ostat0=50 ostat1=00
ata8: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata8: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata8: [MPSAFE]
ata8: [ITHREAD]
ata9: <ATA channel 1> on atapci4
ata9: SATA connect time=0ms
ata9: reset tp1 mask=01 ostat0=50 ostat1=00
ata9: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata9: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata9: [MPSAFE]
ata9: [ITHREAD]
ata10: <ATA channel 2> on atapci4
ata10: SATA connect time=0ms
ata10: reset tp1 mask=01 ostat0=50 ostat1=00
ata10: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata10: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata10: [MPSAFE]
ata10: [ITHREAD]
ata11: <ATA channel 3> on atapci4
ata11: SATA connect time=0ms
ata11: reset tp1 mask=01 ostat0=50 ostat1=00
ata11: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata11: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata11: [MPSAFE]
ata11: [ITHREAD]
vgapci0: <VGA-compatible display> mem 
0xfebf8000-0xfebfbfff,0xfd800000-0xfdffffff irq 17 at device 1.0 on pci1
fwohci0: <VIA Fire II (VT6306)> port 0xe080-0xe0ff mem 
0xfebff000-0xfebff7ff irq 18 at device 4.0 on pci1
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfebff000
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 55
fwohci0: [MPSAFE]
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:10:dc:00:01:07:3b:4e
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x13dc000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:10:dc:07:3b:4e
fwe0: bpf attached
fwe0: Ethernet address: 02:10:dc:07:3b:4e
fwip0: <IP over FireWire> on firewire0
fwip0: bpf attached
fwip0: Firewire address: 00:10:dc:00:01:07:3b:4e @ 0xfffe00000000, S400, 
maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
pci0: <multimedia> at device 6.1 (no driver attached)
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb400-0xb407 mem 
0xfeaf6000-0xfeaf6fff,0xfeafa800-0xfeafa8ff,0xfeafa400-0xfeafa40f irq 20 
at device 8.0 on pci0
nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeaf6000
nfe0: Reserved 0x100 bytes for rid 0x18 type 3 at 0xfeafa800
nfe0: Reserved 0x10 bytes for rid 0x1c type 3 at 0xfeafa400
nfe0: attempting to allocate 8 MSI-X vectors (8 supported)
msi: routing MSI-X IRQ 256 to vector 56
msi: routing MSI-X IRQ 257 to vector 57
msi: routing MSI-X IRQ 258 to vector 58
msi: routing MSI-X IRQ 259 to vector 59
msi: routing MSI-X IRQ 260 to vector 60
msi: routing MSI-X IRQ 261 to vector 61
msi: routing MSI-X IRQ 262 to vector 62
msi: routing MSI-X IRQ 263 to vector 63
nfe0: using IRQs 256-263 for MSI-X
nfe0: Using 8 MSIX messages
miibus0: <MII bus> on nfe0
ciphy0: <Vitesse VSC8601 10/100/1000TX PHY> PHY 0 on miibus0
ciphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
nfe0: bpf attached
nfe0: Ethernet address: 00:19:db:cf:4c:c2
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xb080-0xb087 mem 
0xfeaf5000-0xfeaf5fff,0xfeafa000-0xfeafa0ff,0xfeaf4c00-0xfeaf4c0f irq 20 
at device 9.0 on pci0
nfe1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeaf5000
nfe1: Reserved 0x100 bytes for rid 0x18 type 3 at 0xfeafa000
nfe1: Reserved 0x10 bytes for rid 0x1c type 3 at 0xfeaf4c00
nfe1: attempting to allocate 8 MSI-X vectors (8 supported)
msi: routing MSI-X IRQ 264 to vector 64
msi: routing MSI-X IRQ 265 to vector 65
msi: routing MSI-X IRQ 266 to vector 66
msi: routing MSI-X IRQ 267 to vector 67
msi: routing MSI-X IRQ 268 to vector 68
msi: routing MSI-X IRQ 269 to vector 69
msi: routing MSI-X IRQ 270 to vector 70
msi: routing MSI-X IRQ 271 to vector 71
nfe1: using IRQs 264-271 for MSI-X
nfe1: Using 8 MSIX messages
miibus1: <MII bus> on nfe1
ciphy1: <Vitesse VSC8601 10/100/1000TX PHY> PHY 1 on miibus1
ciphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
nfe1: bpf attached
nfe1: Ethernet address: 00:19:db:cf:65:95
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0x0-0x0
pcib2:   no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0x0-0x0
pcib3:   no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pcib4:   domain            0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   I/O decode        0x0-0x0
pcib4:   no prefetched decode
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
pcib5: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pcib5:   domain            0
pcib5:   secondary bus     5
pcib5:   subordinate bus   5
pcib5:   I/O decode        0x0-0x0
pcib5:   no prefetched decode
pci5: <ACPI PCI bus> on pcib5
pci5: domain=0, physical bus=5
pcib6: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pcib6:   domain            0
pcib6:   secondary bus     6
pcib6:   subordinate bus   6
pcib6:   I/O decode        0x0-0x0
pcib6:   no prefetched decode
pci6: <ACPI PCI bus> on pcib6
pci6: domain=0, physical bus=6
pcib7: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pcib7:   domain            0
pcib7:   secondary bus     7
pcib7:   subordinate bus   7
pcib7:   I/O decode        0x0-0x0
pcib7:   no prefetched decode
pci7: <ACPI PCI bus> on pcib7
pci7: domain=0, physical bus=7
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on 
acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 72
sio0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 73
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 74
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
ahc_isa_probe 2: ioport 0x2c00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
ex_isa_identify()
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xccfff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 258371 -> 100000
procfs registered
lapic: Divisor 2, Frequency 100000744 hz
Timecounter "TSC" frequency 2300017027 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 238475MB <Seagate ST3250824AS 3.AAE> at ata2-master SATA300
ad4: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: nVidia check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ata8-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad16: 114473MB <FUJITSU MHW2120BH 00810013> at ata8-master SATA150
ad16: 234441648 sectors [232581C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad16
ad16: Silicon Image check2 failed
ad16: Adaptec check1 failed
ad16: LSI (v3) check1 failed
ad16: LSI (v2) check1 failed
ad16: FreeBSD check1 failed
ata9-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad18: 476940MB <WDC WD5000AAKS-00YGA0 12.01C02> at ata9-master SATA150
ad18: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad18
ad18: Silicon Image check2 failed
ad18: Adaptec check1 failed
ad18: LSI (v3) check1 failed
ad18: LSI (v2) check1 failed
ad18: FreeBSD check1 failed
ata10-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad20: 476940MB <WDC WD5000AAKS-00YGA0 12.01C02> at ata10-master SATA150
ad20: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
ad20: Silicon Image check2 failed
ad20: Adaptec check1 failed
ad20: LSI (v3) check1 failed
ad20: LSI (v2) check1 failed
ad20: FreeBSD check1 failed
ata11-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad22: 476940MB <WDC WD5000AAKS-00YGA0 12.01C02> at ata11-master SATA150
ad22: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad20
ad22: Silicon Image check2 failed
ad22: Adaptec check1 failed
ad22: LSI (v3) check1 failed
ad22: LSI (v2) check1 failed
ad22: FreeBSD check1 failed
GEOM: new disk ad22
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 0
ioapic0: Assigning ISA IRQ 12 to local APIC 1
ioapic0: Assigning ISA IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 15 to local APIC 1
ioapic0: Assigning PCI IRQ 16 to local APIC 0
ioapic0: Assigning PCI IRQ 18 to local APIC 1
ioapic0: Assigning PCI IRQ 21 to local APIC 0
ioapic0: Assigning PCI IRQ 22 to local APIC 1
ioapic0: Assigning PCI IRQ 23 to local APIC 0
msi: Assigning MSI-X IRQ 256 to local APIC 1
msi: Assigning MSI-X IRQ 257 to local APIC 0
msi: Assigning MSI-X IRQ 258 to local APIC 1
msi: Assigning MSI-X IRQ 259 to local APIC 0
msi: Assigning MSI-X IRQ 260 to local APIC 1
msi: Assigning MSI-X IRQ 261 to local APIC 0
msi: Assigning MSI-X IRQ 262 to local APIC 1
msi: Assigning MSI-X IRQ 263 to local APIC 0
msi: Assigning MSI-X IRQ 264 to local APIC 1
msi: Assigning MSI-X IRQ 265 to local APIC 0
msi: Assigning MSI-X IRQ 266 to local APIC 1
msi: Assigning MSI-X IRQ 267 to local APIC 0
msi: Assigning MSI-X IRQ 268 to local APIC 1
msi: Assigning MSI-X IRQ 269 to local APIC 0
msi: Assigning MSI-X IRQ 270 to local APIC 1
msi: Assigning MSI-X IRQ 271 to local APIC 0
Trying to mount root from ufs:/dev/ad16s1a
start_init: trying /sbin/init
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
ZFS filesystem version 6
ZFS storage pool version 6
nfe0: link state changed to UP
GEOM: Reconfigure ad4s1c, start 0 length 250056705024 end 250056705023
GEOM: Reconfigure ad4s1d, start 0 length 250056705024 end 250056705023
Comment 6 Volker Werth freebsd_committer freebsd_triage 2008-03-07 19:45:40 UTC
Responsible Changed
From-To: freebsd-bugs->sos


Over to maintainer(s).
Comment 7 Morten Strårup 2008-06-12 19:53:05 UTC
I tried upgrading to and booting with 7-current a couple of days ago, 
there are still errrors, not as many as with 7.0 but still not usable. I 
still see segfaults where there shouldn't be any.
Comment 8 Andrey V. Elsukov 2008-07-29 06:16:13 UTC
Hi, Morten.

Can you try last CURRENT, probably this commit fixes your problem:
http://lists.freebsd.org/pipermail/cvs-src/2008-July/093202.html

-- 
WBR, Andrey V. Elsukov
Comment 9 Mark Linimon freebsd_committer freebsd_triage 2009-05-12 05:47:04 UTC
State Changed
From-To: open->feedback

To submitter: does -current fix your problem? 


Comment 10 Mark Linimon freebsd_committer freebsd_triage 2009-05-12 05:47:04 UTC
Responsible Changed
From-To: sos->linimon

sos@ is not actively working on ATA-related PRs.
Comment 11 William FRANCK 2009-10-31 19:29:49 UTC
Hi,

have same problem with FreeBSd 7.2-amd64 and FreeBSd 8.0-RC1/RC2-amd64
on MSI K9N-SLI (nvidia 570 MCP55 SLI) with AMD 6000 X2 and 2G
only 1 SATA drive (Seagate 7200.12 750 Gb)

FreeBSd 7.2-i386 trap on install DVD and
FreeBSd 8.0-RC1/RC2-i386 impossible to correctly define Labels with  
sysinstall on the DVD.

Tried almost 10 combinations of partitions, slices , etc ...  on each  
8.0-i386 and -amd64.

Same  odd file corruptions.
Can not event buildworld , buildkernel 8.0 compiled, but installkernel  
gave up on some files.

Completely stuck with that motherboard :(
By the way, did DOS memtest for a night : OK
Did an install on the same drive of WinXP-SP2 install with Raid  
drivers (F6) was OK.
Comment 12 Mark Linimon freebsd_committer freebsd_triage 2010-02-07 03:11:14 UTC
State Changed
From-To: feedback->open

Apparently this is still a problem. 


Comment 13 Mark Linimon freebsd_committer freebsd_triage 2010-02-07 03:11:14 UTC
Responsible Changed
From-To: linimon->freebsd-bugs
Comment 14 Eitan Adler freebsd_committer freebsd_triage 2017-12-31 07:59:41 UTC
For bugs matching the following criteria:

Status: In Progress Changed: (is less than) 2014-06-01

Reset to default assignee and clear in-progress tags.

Mail being skipped