On an Acer Veritron M410 system with AMD Athlon 64 X2 Dual Core Processor 4200+ 7.0-RELEASE panics after installation (from CD): real memory = 1878917120 (1791 MB) avail memory = 1828093952 (1743 MB) ACPI APIC Table: <ACRSYS ACRPRDCT> AP #1 (PHY# 1) failed! panic y/n? [y] On 5/16/2008 I updated the system via cvsup (7.0-STABLE), rebuilt and installed a new kernel (GENERIC) and the problem is still the same. The system seems to operate fine when answer "n" to the panic question. Two CPUs show up and are being utilized. Full dmesg output follows (SANTAFE-kernel conf is a plain copy of GENERIC, without any modifications): FreeBSD 7.0-STABLE #0: Fri May 16 04:06:56 MDT 2008 thoellri@santafe.gateway.2wire.net:/usr/obj/usr/src/sys/SANTAFE Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2194.51-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x60fb2 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch> Cores per package: 2 real memory = 1878917120 (1791 MB) avail memory = 1828093952 (1743 MB) ACPI APIC Table: <ACRSYS ACRPRDCT> AP #1 (PHY# 1) failed! panic y/n? [y] FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 4 ioapic0 <Version 2.1> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <ACRSYS ACRPRDCT> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 6fee0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 device_attach: acpi_hpet0 attach returned 12 cpu0: <ACPI CPU> on acpi0 powernow0: <PowerNow! K8> on cpu0 cpu1: <ACPI CPU> on acpi0 powernow1: <PowerNow! K8> on cpu1 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xde00-0xdeff mem 0xd0000000-0xdfffffff,0xfdef0000-0xfdefffff,0xfdd00000-0xfddfffff irq 18 at device 5.0 on pci1 pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pci2: <ACPI PCI bus> on pcib2 mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xee00-0xeeff mem 0xfdcfc000-0xfdcfffff irq 19 at device 0.0 on pci2 msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on mskc0 msk0: Ethernet address: 00:1c:25:84:48:f5 miibus0: <MII bus> on msk0 e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto mskc0: [FILTER] atapci0: <ATI IXP600 SATA300 controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 18.0 on pci0 atapci0: [ITHREAD] atapci0: AHCI Version 01.10 controller with 4 ports detected ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] ata4: <ATA channel 2> on atapci0 ata5: <ATA channel 3> on atapci0 ata5: [ITHREAD] ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 16 at device 19.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 17 at device 19.1 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ohci2: <OHCI (generic) USB controller> mem 0xfe02c000-0xfe02cfff irq 18 at device 19.2 on pci0 ohci2: [GIANT-LOCKED] ohci2: [ITHREAD] usb2: OHCI version 1.0, legacy support usb2: SMM does not respond, resetting usb2: <OHCI (generic) USB controller> on ohci2 usb2: USB revision 1.0 uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ohci3: <OHCI (generic) USB controller> mem 0xfe02b000-0xfe02bfff irq 17 at device 19.3 on pci0 ohci3: [GIANT-LOCKED] ohci3: [ITHREAD] usb3: OHCI version 1.0, legacy support usb3: SMM does not respond, resetting usb3: <OHCI (generic) USB controller> on ohci3 usb3: USB revision 1.0 uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered ohci4: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 19.4 on pci0 ohci4: [GIANT-LOCKED] ohci4: [ITHREAD] usb4: OHCI version 1.0, legacy support usb4: SMM does not respond, resetting usb4: <OHCI (generic) USB controller> on ohci4 usb4: USB revision 1.0 uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq 19 at device 19.5 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb5: EHCI version 1.0 usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4 usb5: USB revision 2.0 uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5 uhub5: 10 ports with 10 removable, self powered pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf900-0xf90f at device 20.1 on pci0 ata0: <ATA channel 0> on atapci1 ata0: [ITHREAD] pci0: <multimedia> at device 20.2 (no driver attached) isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci3: <ACPI PCI bus> on pcib3 acpi_tz0: <Thermal Zone> on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A sio1: [FILTER] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model NetMouse/NetScroll Optical, device ID 0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 device_attach: acpi_hpet0 attach returned 12 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xcd000-0xcdfff pnpid ORM0000 on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 ppbus0: [ITHREAD] plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec ad4: 152627MB <Seagate ST3160815AS 3.AAE> at ata2-master SATA300 acd0: DVDR <ATAPI DVD A DH16A3S/3A12> at ata3-master SATA150 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad4s1a Fix: None. How-To-Repeat: Hardware specific, I'm afraid.
Tobias Hoellrich wrote: Hi Tobias, Can you please issue a boot verbose during startup, and possibly even upgrade to 8-CURRENT (which has debugging support included in the OS) so that we might be able to determine what is going on? Thanks remko -- /"\ Best regards, | remko@FreeBSD.org \ / Remko Lodder | remko@EFnet X http://www.evilcoder.org/ | / \ ASCII Ribbon Campaign | Against HTML Mail and News
State Changed From-To: open->feedback I asked for feedback, reflect that in the ticket.
Remko - thanks for the quick response. Here's the first chunk of feedback: Verbose logging from the trouble maker. Again I answered obviously "n" at the panic-prompt. The weird memory figure comes from 2GB minus 256MB for integrated graphics. I'll get to 8-CURRENT in a while Cheers - Tobias FreeBSD 7.0-STABLE #0: Fri May 16 04:06:56 MDT 2008 thoellri@santafe.gateway.2wire.net:/usr/obj/usr/src/sys/SANTAFE Preloaded elf kernel "/boot/kernel/kernel" at 0xc0db1000. Preloaded elf module "/boot/kernel/accf_http.ko" at 0xc0db1188. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0db1238. Calibrating clock(s) ... i8254 clock: 1193205 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2194510455 Hz CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2194.51-MHz 686-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x60fb2 Stepping =3D 2 =20 Features=3D0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG= E ,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=3D0x2001<SSE3,CX16> AMD Features=3D0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=3D0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch> Cores per package: 2 Data TLB: 32 entries, fully associative Instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory =3D 1878917120 (1791 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001028000 - 0x000000006e011fff, 1828626432 bytes (446442 pages) avail memory =3D 1828093952 (1743 MB) Table 'FACP' at 0x6ffe3080 Table 'SSDT' at 0x6ffe7e80 Table 'HPET' at 0x6ffe80c0 Table 'SLIC' at 0x6ffe8100 Table 'MCFG' at 0x6ffe8280 Table 'APIC' at 0x6ffe7dc0 MADT: Found table at 0x6ffe7dc0 MP Configuration Table version 1.4 found at 0xc00f1f94 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 2 ACPI ID 2: disabled MADT: Found CPU APIC ID 3 ACPI ID 3: disabled ACPI APIC Table: <ACRSYS ACRPRDCT> AP #1 (PHY# 1) failed! panic y/n? [y]=20 INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00f9f50 bios32: Entry =3D 0xfa560 (c00fa560) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xf0000+0xa5b0 pnpbios: Found PnP BIOS data at 0xc00fb090 pnpbios: Entry =3D f0000:b0c0 Rev =3D 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 ULE: setup cpu group 0 ULE: setup cpu 0 ULE: adding cpu 0 to group 0: cpus 1 mask 0x1 ULE: setup cpu group 1 ULE: setup cpu 1 ULE: adding cpu 1 to group 1: cpus 1 mask 0x2 ACPI: RSDP @ 0x0xf8140/0x0024 (v 2 ACRSYS) ACPI: RSDT @ 0x0x6ffe3000/0x003C (v 1 ACRSYS ACRPRDCT 0x42302E31 AWRD 0x00000000) ACPI: FACP @ 0x0x6ffe3080/0x0074 (v 1 ACRSYS ACRPRDCT 0x42302E31 AWRD 0x00000000) ACPI: DSDT @ 0x0x6ffe3100/0x4CB4 (v 1 ACRSYS ACRPRDCT 0x00001000 MSFT 0x03000000) ACPI: FACS @ 0x0x6ffe0000/0x0040 ACPI: SSDT @ 0x0x6ffe7e80/0x0206 (v 1 PTLTD POWERNOW 0x00000001 LTP 0x00000001) ACPI: HPET @ 0x0x6ffe80c0/0x0038 (v 1 ACRSYS ACRPRDCT 0x42302E31 AWRD 0x00000098) ACPI: SLIC @ 0x0x6ffe8100/0x0176 (v 1 ACRSYS ACRPRDCT 0x42302E31 AWRD 0x00000020) ACPI: MCFG @ 0x0x6ffe8280/0x003C (v 1 ACRSYS ACRPRDCT 0x42302E31 AWRD 0x00000000) ACPI: APIC @ 0x0x6ffe7dc0/0x0084 (v 1 ACRSYS ACRPRDCT 0x42302E31 AWRD 0x00000000) MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 4 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: low lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high MADT: Ignoring local NMI routed to ACPI CPU 2 MADT: Ignoring local NMI routed to ACPI CPU 3 ioapic0 <Version 2.1> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> wlan_amrr: <AMRR Transmit Rate Control Algorithm> wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (May 16 2008 04:06:40) npx0: INT 16 interface acpi0: <ACRSYS ACRPRDCT> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xd8c18000 pa 0x1000 pci_open(1): mode 1 addr port (0x0cf8) is 0x8000903c pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there = (id=3D79101002) pcibios: BIOS version 3.00 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.BAR1 -> bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.HETT -> bus 0 dev 20 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 6fee0000 (3) failed ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/1 1/2 1/2 1/2 1/2 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 device_attach: acpi_hpet0 attach returned 12 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode powernow0: <PowerNow! K8> on cpu0 cpu1: <ACPI CPU> on acpi0 powernow1: <PowerNow! K8> on cpu1 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=3D0, physical bus=3D0 found-> vendor=3D0x1002, dev=3D0x7910, revid=3D0x00 domain=3D0, bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x2220, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) found-> vendor=3D0x1002, dev=3D0x7912, revid=3D0x00 domain=3D0, bus=3D0, slot=3D1, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0230, cachelnsz=3D0 (dwords) lattimer=3D0x63 (2970 ns), mingnt=3D0x08 (2000 ns), = maxlat=3D0x00 (0 ns) found-> vendor=3D0x1002, dev=3D0x7917, revid=3D0x00 domain=3D0, bus=3D0, slot=3D7, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D1 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message found-> vendor=3D0x1002, dev=3D0x4380, revid=3D0x00 domain=3D0, bus=3D0, slot=3D18, func=3D0 class=3D01-01-8f, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0230, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base rxff00, size 3, enabled map[14]: type I/O Port, range 32, base rxfe00, size 2, enabled map[18]: type I/O Port, range 32, base rxfd00, size 3, enabled map[1c]: type I/O Port, range 32, base rxfc00, size 2, enabled map[20]: type I/O Port, range 32, base rxfb00, size 4, enabled map[24]: type Memory, range 32, base rxfe02f000, size 10, enabled pcib0: matched entry for 0.18.INTA pcib0: slot 18 INTA hardwired to IRQ 22 found-> vendor=3D0x1002, dev=3D0x4387, revid=3D0x00 domain=3D0, bus=3D0, slot=3D19, func=3D0 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x02a0, cachelnsz=3D1 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) intpin=3Da, irq=3D11 map[10]: type Memory, range 32, base rxfe02e000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 16 found-> vendor=3D0x1002, dev=3D0x4388, revid=3D0x00 domain=3D0, bus=3D0, slot=3D19, func=3D1 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x02a0, cachelnsz=3D1 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) intpin=3Db, irq=3D10 map[10]: type Memory, range 32, base rxfe02d000, size 12, enabled pcib0: matched entry for 0.19.INTB pcib0: slot 19 INTB hardwired to IRQ 17 found-> vendor=3D0x1002, dev=3D0x4389, revid=3D0x00 domain=3D0, bus=3D0, slot=3D19, func=3D2 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x02a0, cachelnsz=3D1 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) intpin=3Dc, irq=3D5 map[10]: type Memory, range 32, base rxfe02c000, size 12, enabled pcib0: matched entry for 0.19.INTC pcib0: slot 19 INTC hardwired to IRQ 18 found-> vendor=3D0x1002, dev=3D0x438a, revid=3D0x00 domain=3D0, bus=3D0, slot=3D19, func=3D3 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x02a0, cachelnsz=3D1 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) intpin=3Db, irq=3D10 map[10]: type Memory, range 32, base rxfe02b000, size 12, enabled pcib0: matched entry for 0.19.INTB pcib0: slot 19 INTB hardwired to IRQ 17 found-> vendor=3D0x1002, dev=3D0x438b, revid=3D0x00 domain=3D0, bus=3D0, slot=3D19, func=3D4 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x02a0, cachelnsz=3D1 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) intpin=3Dc, irq=3D5 map[10]: type Memory, range 32, base rxfe02a000, size 12, enabled pcib0: matched entry for 0.19.INTC pcib0: slot 19 INTC hardwired to IRQ 18 found-> vendor=3D0x1002, dev=3D0x4386, revid=3D0x00 domain=3D0, bus=3D0, slot=3D19, func=3D5 class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D1 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) intpin=3Dd, irq=3D10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base rxfe029000, size 8, enabled pcib0: matched entry for 0.19.INTD pcib0: slot 19 INTD hardwired to IRQ 19 found-> vendor=3D0x1002, dev=3D0x4385, revid=3D0x14 domain=3D0, bus=3D0, slot=3D20, func=3D0 class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0403, statreg=3D0x0230, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) map[10]: type I/O Port, range 32, base rxb00, size 4, enabled found-> vendor=3D0x1002, dev=3D0x438c, revid=3D0x00 domain=3D0, bus=3D0, slot=3D20, func=3D1 class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0220, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) intpin=3Da, irq=3D255 map[20]: type I/O Port, range 32, base rxf900, size 4, enabled found-> vendor=3D0x1002, dev=3D0x4383, revid=3D0x00 domain=3D0, bus=3D0, slot=3D20, func=3D2 class=3D04-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0410, cachelnsz=3D1 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 64, base rxfe024000, size 14, enabled pcib0: matched entry for 0.20.INTA pcib0: slot 20 INTA hardwired to IRQ 16 found-> vendor=3D0x1002, dev=3D0x438d, revid=3D0x00 domain=3D0, bus=3D0, slot=3D20, func=3D3 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x000f, statreg=3D0x0220, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) found-> vendor=3D0x1002, dev=3D0x4384, revid=3D0x00 domain=3D0, bus=3D0, slot=3D20, func=3D4 class=3D06-04-01, hdrtype=3D0x01, mfdev=3D1 cmdreg=3D0x0027, statreg=3D0x02a0, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x04 = (1000 ns) found-> vendor=3D0x1022, dev=3D0x1100, revid=3D0x00 domain=3D0, bus=3D0, slot=3D24, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) found-> vendor=3D0x1022, dev=3D0x1101, revid=3D0x00 domain=3D0, bus=3D0, slot=3D24, func=3D1 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) found-> vendor=3D0x1022, dev=3D0x1102, revid=3D0x00 domain=3D0, bus=3D0, slot=3D24, func=3D2 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) found-> vendor=3D0x1022, dev=3D0x1103, revid=3D0x00 domain=3D0, bus=3D0, slot=3D24, func=3D3 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xd000-0xdfff pcib1: memory decode 0xfdd00000-0xfdefffff pcib1: prefetched decode 0xd0000000-0xdfffffff pci1: <ACPI PCI bus> on pcib1 pci1: domain=3D0, physical bus=3D1 found-> vendor=3D0x1002, dev=3D0x791e, revid=3D0x00 domain=3D0, bus=3D1, slot=3D5, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D1 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) intpin=3Da, irq=3D5 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Prefetchable Memory, range 64, base rxd0000000, size 28, enabled pcib1: requested memory range 0xd0000000-0xdfffffff: good map[18]: type Memory, range 64, base rxfdef0000, size 16, enabled pcib1: requested memory range 0xfdef0000-0xfdefffff: good map[20]: type I/O Port, range 32, base rxde00, size 8, enabled pcib1: requested I/O range 0xde00-0xdeff: in range map[24]: type Memory, range 32, base rxfdd00000, size 20, enabled pcib1: requested memory range 0xfdd00000-0xfddfffff: good pcib1: matched entry for 1.5.INTA pcib1: slot 5 INTA hardwired to IRQ 18 vgapci0: <VGA-compatible display> port 0xde00-0xdeff mem 0xd0000000-0xdfffffff,0xfdef0000-0xfdefffff,0xfdd00000-0xfddfffff irq 18 at device 5.0 on pci1 pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xe000-0xefff pcib2: memory decode 0xfdc00000-0xfdcfffff pcib2: prefetched decode 0xfdf00000-0xfdffffff pci2: <ACPI PCI bus> on pcib2 pci2: domain=3D0, physical bus=3D2 found-> vendor=3D0x11ab, dev=3D0x4364, revid=3D0x20 domain=3D0, bus=3D2, slot=3D0, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D1 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) intpin=3Da, irq=3D10 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base rxfdcfc000, size 14, enabled pcib2: requested memory range 0xfdcfc000-0xfdcfffff: good map[18]: type I/O Port, range 32, base rxee00, size 8, enabled pcib2: requested I/O range 0xee00-0xeeff: in range pcib2: matched entry for 2.0.INTA pcib2: slot 0 INTA hardwired to IRQ 19 mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xee00-0xeeff mem 0xfdcfc000-0xfdcfffff irq 19 at device 0.0 on pci2 mskc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfdcfc000 mskc0: MSI count : 1 mskc0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to vector 49 mskc0: using IRQ 256 for MSI mskc0: RAM buffer size : 128KB mskc0: Port 0 : Rx Queue 85KB(0x00000000:0x000153ff) mskc0: Port 0 : Tx Queue 43KB(0x00015400:0x0001ffff) msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on mskc0 msk0: bpf attached msk0: Ethernet address: 00:1c:25:84:48:f5 miibus0: <MII bus> on msk0 e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto mskc0: [MPSAFE] mskc0: [FILTER] atapci0: <ATI IXP600 SATA300 controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 18.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfb00 atapci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfe02f000 ioapic0: routing intpin 22 (PCI IRQ 22) to vector 50 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: AHCI Version 01.10 controller with 4 ports detected ata2: <ATA channel 0> on atapci0 ata2: SATA connect time=3D0ms ata2: SIGNATURE: 00000101 ata2: ahci_reset devices=3D0x1<ATA_MASTER> ata2: [MPSAFE] ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: SATA connect time=3D0ms ata3: SIGNATURE: eb140101 ata3: ahci_reset devices=3D0x4<ATAPI_MASTER> ata3: [MPSAFE] ata3: [ITHREAD] ata4: <ATA channel 2> on atapci0 ata4: SATA connect status=3D00000000 ata4: ahci_reset devices=3D0x0 ata4: [MPSAFE] ata4: [ITHREAD] ata5: <ATA channel 3> on atapci0 ata5: SATA connect status=3D00000000 ata5: ahci_reset devices=3D0x0 ata5: [MPSAFE] ata5: [ITHREAD] ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 16 at device 19.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02e000 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 51 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 17 at device 19.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02d000 ioapic0: routing intpin 17 (PCI IRQ 17) to vector 52 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ohci2: <OHCI (generic) USB controller> mem 0xfe02c000-0xfe02cfff irq 18 at device 19.2 on pci0 ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02c000 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 53 ohci2: [GIANT-LOCKED] ohci2: [ITHREAD] usb2: OHCI version 1.0, legacy support usb2: SMM does not respond, resetting usb2: <OHCI (generic) USB controller> on ohci2 usb2: USB revision 1.0 uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ohci3: <OHCI (generic) USB controller> mem 0xfe02b000-0xfe02bfff irq 17 at device 19.3 on pci0 ohci3: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02b000 ohci3: [GIANT-LOCKED] ohci3: [ITHREAD] usb3: OHCI version 1.0, legacy support usb3: SMM does not respond, resetting usb3: <OHCI (generic) USB controller> on ohci3 usb3: USB revision 1.0 uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered ohci4: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 19.4 on pci0 ohci4: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02a000 ohci4: [GIANT-LOCKED] ohci4: [ITHREAD] usb4: OHCI version 1.0, legacy support usb4: SMM does not respond, resetting usb4: <OHCI (generic) USB controller> on ohci4 usb4: USB revision 1.0 uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq 19 at device 19.5 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe029000 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 54 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] ehci0: Dropped interrupts workaround enabled usb5: EHCI version 1.0 usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4 usb5: <EHCI (generic) USB 2.0 controller> on ehci0 usb5: USB revision 2.0 uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5 uhub5: 10 ports with 10 removable, self powered pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf900-0xf90f at device 20.1 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf900 ata0: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=3D00 ostat0=3Dff ostat1=3Dff ioapic0: routing intpin 14 (ISA IRQ 14) to vector 55 ata0: [MPSAFE] ata0: [ITHREAD] pci0: <multimedia> at device 20.2 (no driver attached) isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xc000-0xcfff pcib3: memory decode 0xfdb00000-0xfdbfffff pcib3: prefetched decode 0xfda00000-0xfdafffff pcib3: Subtractively decoded bridge. pci3: <ACPI PCI bus> on pcib3 pci3: domain=3D0, physical bus=3D3 acpi_tz0: <Thermal Zone> on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 ioapic0: routing intpin 6 (ISA IRQ 6) to vector 56 fdc0: [FILTER] sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57 sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ioapic0: routing intpin 3 (ISA IRQ 3) to vector 58 sio1: [FILTER] psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 59 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to vector 60 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model NetMouse/NetScroll Optical, device ID 0-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 device_attach: acpi_hpet0 attach returned 12 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() ahc_isa_probe 0: ioport 0xc00 alloc failed ata: ata0 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xcd000-0xcdfff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) ata1 failed to probe at port 0x170 irq 15 on isa0 bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 ioapic0: routing intpin 7 (ISA IRQ 7) to vector 61 ppbus0: [MPSAFE] ppbus0: [ITHREAD] plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 118006 -> 100000 procfs registered lapic: Divisor 2, Frequency 99750481 hz Timecounter "TSC" frequency 2194510455 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout ata2-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA133 cable=3D40 wire ad4: 152627MB <Seagate ST3160815AS 3.AAE> at ata2-master SATA300 ad4: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad4 ad4: Silicon Image check3 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ata3-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D40 wire ata3: device_reset timeout=3D290us acd0: <ATAPI DVD A DH16A3S/3A12> DVDR drive at ata3 as master acd0: read 8269KB/s (2067KB/s) write 8269KB/s (8269KB/s), 2048KB buffer, SATA150 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ioapic0: Assigning ISA IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 3 to local APIC 1 ioapic0: Assigning ISA IRQ 4 to local APIC 0 ioapic0: Assigning ISA IRQ 6 to local APIC 1 ioapic0: Assigning ISA IRQ 7 to local APIC 0 ioapic0: Assigning ISA IRQ 9 to local APIC 1 ioapic0: Assigning ISA IRQ 12 to local APIC 0 ioapic0: Assigning ISA IRQ 14 to local APIC 1 ioapic0: Assigning PCI IRQ 16 to local APIC 0 ioapic0: Assigning PCI IRQ 17 to local APIC 1 ioapic0: Assigning PCI IRQ 18 to local APIC 0 ioapic0: Assigning PCI IRQ 19 to local APIC 1 ioapic0: Assigning PCI IRQ 22 to local APIC 0 msi: Assigning MSI IRQ 256 to local APIC 1 Trying to mount root from ufs:/dev/ad4s1a start_init: trying /sbin/init fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout Linux ELF exec handler installed
Remko - since this morning I'm running 8.0-CURRENT on the same system. World and Kernel have been rebuilt - ports are still being updated.=20 I'm afraid the situation is not any different than with 7.0-STABLE. Same panic still appears. I append the output from dmesg after a verbose boot below.=20 If it helps at all: the amd64-7.0-LiveCD spits out a number of kernel traps right after acpi.ko is loaded. It ends up in a really bad shape and the system needs to be power-cycled. Also, Windows XP did not have any issues with the Acer, but then that's not what I want to run on it ;-) Thanks Tobias FreeBSD 8.0-CURRENT #0: Sat May 17 09:19:12 MDT 2008 thoellri@santafe.gateway.2wire.net:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc0e5a000. Preloaded elf module "/boot/kernel/accf_http.ko" at 0xc0e5a188. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0e5a238. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2194512323 Hz CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2194.51-MHz 686-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x60fb2 Stepping =3D 2 =20 Features=3D0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG= E ,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=3D0x2001<SSE3,CX16> AMD Features=3D0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=3D0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch> Cores per package: 2 Data TLB: 32 entries, fully associative Instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory =3D 1878917120 (1791 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001025000 - 0x000000006e1ccfff, 1830453248 bytes (446888 pages) avail memory =3D 1829961728 (1745 MB) Table 'FACP' at 0x6ffe3080 Table 'SSDT' at 0x6ffe7e80 Table 'HPET' at 0x6ffe80c0 Table 'SLIC' at 0x6ffe8100 Table 'MCFG' at 0x6ffe8280 Table 'APIC' at 0x6ffe7dc0 MADT: Found table at 0x6ffe7dc0 MP Configuration Table version 1.4 found at 0xc00f1f94 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 2 ACPI ID 2: disabled MADT: Found CPU APIC ID 3 ACPI ID 3: disabled ACPI APIC Table: <ACRSYS ACRPRDCT> AP #1 (PHY# 1) failed! panic y/n? [y] INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00f9f50 bios32: Entry =3D 0xfa560 (c00fa560) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xf0000+0xa5b0 pnpbios: Found PnP BIOS data at 0xc00fb090 pnpbios: Entry =3D f0000:b0c0 Rev =3D 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP @ 0x0xf8140/0x0024 (v 2 ACRSYS) ACPI: RSDT @ 0x0x6ffe3000/0x003C (v 1 ACRSYS ACRPRDCT 0x42302E31 AWRD 0x00000000) ACPI: FACP @ 0x0x6ffe3080/0x0074 (v 1 ACRSYS ACRPRDCT 0x42302E31 AWRD 0x00000000) ACPI: DSDT @ 0x0x6ffe3100/0x4CB4 (v 1 ACRSYS ACRPRDCT 0x00001000 MSFT 0x03000000) ACPI: FACS @ 0x0x6ffe0000/0x0040 ACPI: SSDT @ 0x0x6ffe7e80/0x0206 (v 1 PTLTD POWERNOW 0x00000001 LTP 0x00000001) ACPI: HPET @ 0x0x6ffe80c0/0x0038 (v 1 ACRSYS ACRPRDCT 0x42302E31 AWRD 0x00000098) ACPI: SLIC @ 0x0x6ffe8100/0x0176 (v 1 ACRSYS ACRPRDCT 0x42302E31 AWRD 0x00000020) ACPI: MCFG @ 0x0x6ffe8280/0x003C (v 1 ACRSYS ACRPRDCT 0x42302E31 AWRD 0x00000000) ACPI: APIC @ 0x0x6ffe7dc0/0x0084 (v 1 ACRSYS ACRPRDCT 0x42302E31 AWRD 0x00000000) MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 4 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: low lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high MADT: Ignoring local NMI routed to ACPI CPU 2 MADT: Ignoring local NMI routed to ACPI CPU 3 ioapic0 <Version 2.1> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 wlan: <802.11 Link Layer> ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled io: <I/O> null: <null device, zero device> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (May 17 2008 09:18:09) npx0: INT 16 interface acpi0: <ACRSYS ACRPRDCT> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xc4a5e000 pa 0x1000 pci_open(1): mode 1 addr port (0x0cf8) is 0x8000903c pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there = (id=3D79101002) pcibios: BIOS version 3.00 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.BAR1 -> bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.HETT -> bus 0 dev 20 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 6fee0000 (3) failed ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=3D0, physical bus=3D0 found-> vendor=3D0x1002, dev=3D0x7910, revid=3D0x00 domain=3D0, bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x2220, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) found-> vendor=3D0x1002, dev=3D0x7912, revid=3D0x00 domain=3D0, bus=3D0, slot=3D1, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0230, cachelnsz=3D0 (dwords) lattimer=3D0x63 (2970 ns), mingnt=3D0x08 (2000 ns), = maxlat=3D0x00 (0 ns) found-> vendor=3D0x1002, dev=3D0x7917, revid=3D0x00 domain=3D0, bus=3D0, slot=3D7, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D1 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) powerspec 3 supports D0 D3 current D0 MSI supports 1 message found-> vendor=3D0x1002, dev=3D0x4380, revid=3D0x00 domain=3D0, bus=3D0, slot=3D18, func=3D0 class=3D01-01-8f, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0230, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base rxff00, size 3, enabled map[14]: type I/O Port, range 32, base rxfe00, size 2, enabled map[18]: type I/O Port, range 32, base rxfd00, size 3, enabled map[1c]: type I/O Port, range 32, base rxfc00, size 2, enabled map[20]: type I/O Port, range 32, base rxfb00, size 4, enabled map[24]: type Memory, range 32, base rxfe02f000, size 10, enabled pcib0: matched entry for 0.18.INTA pcib0: slot 18 INTA hardwired to IRQ 22 found-> vendor=3D0x1002, dev=3D0x4387, revid=3D0x00 domain=3D0, bus=3D0, slot=3D19, func=3D0 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x02a0, cachelnsz=3D1 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) intpin=3Da, irq=3D11 map[10]: type Memory, range 32, base rxfe02e000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 16 found-> vendor=3D0x1002, dev=3D0x4388, revid=3D0x00 domain=3D0, bus=3D0, slot=3D19, func=3D1 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x02a0, cachelnsz=3D1 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) intpin=3Db, irq=3D10 map[10]: type Memory, range 32, base rxfe02d000, size 12, enabled pcib0: matched entry for 0.19.INTB pcib0: slot 19 INTB hardwired to IRQ 17 found-> vendor=3D0x1002, dev=3D0x4389, revid=3D0x00 domain=3D0, bus=3D0, slot=3D19, func=3D2 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x02a0, cachelnsz=3D1 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) intpin=3Dc, irq=3D5 map[10]: type Memory, range 32, base rxfe02c000, size 12, enabled pcib0: matched entry for 0.19.INTC pcib0: slot 19 INTC hardwired to IRQ 18 found-> vendor=3D0x1002, dev=3D0x438a, revid=3D0x00 domain=3D0, bus=3D0, slot=3D19, func=3D3 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x02a0, cachelnsz=3D1 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) intpin=3Db, irq=3D10 map[10]: type Memory, range 32, base rxfe02b000, size 12, enabled pcib0: matched entry for 0.19.INTB pcib0: slot 19 INTB hardwired to IRQ 17 found-> vendor=3D0x1002, dev=3D0x438b, revid=3D0x00 domain=3D0, bus=3D0, slot=3D19, func=3D4 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x02a0, cachelnsz=3D1 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) intpin=3Dc, irq=3D5 map[10]: type Memory, range 32, base rxfe02a000, size 12, enabled pcib0: matched entry for 0.19.INTC pcib0: slot 19 INTC hardwired to IRQ 18 found-> vendor=3D0x1002, dev=3D0x4386, revid=3D0x00 domain=3D0, bus=3D0, slot=3D19, func=3D5 class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D1 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) intpin=3Dd, irq=3D10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base rxfe029000, size 8, enabled pcib0: matched entry for 0.19.INTD pcib0: slot 19 INTD hardwired to IRQ 19 found-> vendor=3D0x1002, dev=3D0x4385, revid=3D0x14 domain=3D0, bus=3D0, slot=3D20, func=3D0 class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0403, statreg=3D0x0230, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) map[10]: type I/O Port, range 32, base rxb00, size 4, enabled found-> vendor=3D0x1002, dev=3D0x438c, revid=3D0x00 domain=3D0, bus=3D0, slot=3D20, func=3D1 class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0220, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) intpin=3Da, irq=3D255 map[20]: type I/O Port, range 32, base rxf900, size 4, enabled found-> vendor=3D0x1002, dev=3D0x4383, revid=3D0x00 domain=3D0, bus=3D0, slot=3D20, func=3D2 class=3D04-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0410, cachelnsz=3D1 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 64, base rxfe024000, size 14, enabled pcib0: matched entry for 0.20.INTA pcib0: slot 20 INTA hardwired to IRQ 16 found-> vendor=3D0x1002, dev=3D0x438d, revid=3D0x00 domain=3D0, bus=3D0, slot=3D20, func=3D3 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x000f, statreg=3D0x0220, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) found-> vendor=3D0x1002, dev=3D0x4384, revid=3D0x00 domain=3D0, bus=3D0, slot=3D20, func=3D4 class=3D06-04-01, hdrtype=3D0x01, mfdev=3D1 cmdreg=3D0x0027, statreg=3D0x02a0, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x04 = (1000 ns) found-> vendor=3D0x1022, dev=3D0x1100, revid=3D0x00 domain=3D0, bus=3D0, slot=3D24, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) found-> vendor=3D0x1022, dev=3D0x1101, revid=3D0x00 domain=3D0, bus=3D0, slot=3D24, func=3D1 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) found-> vendor=3D0x1022, dev=3D0x1102, revid=3D0x00 domain=3D0, bus=3D0, slot=3D24, func=3D2 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) found-> vendor=3D0x1022, dev=3D0x1103, revid=3D0x00 domain=3D0, bus=3D0, slot=3D24, func=3D3 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xd000-0xdfff pcib1: memory decode 0xfdd00000-0xfdefffff pcib1: prefetched decode 0xd0000000-0xdfffffff pci1: <ACPI PCI bus> on pcib1 pci1: domain=3D0, physical bus=3D1 found-> vendor=3D0x1002, dev=3D0x791e, revid=3D0x00 domain=3D0, bus=3D1, slot=3D5, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D1 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) intpin=3Da, irq=3D5 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Prefetchable Memory, range 64, base rxd0000000, size 28, enabled pcib1: requested memory range 0xd0000000-0xdfffffff: good map[18]: type Memory, range 64, base rxfdef0000, size 16, enabled pcib1: requested memory range 0xfdef0000-0xfdefffff: good map[20]: type I/O Port, range 32, base rxde00, size 8, enabled pcib1: requested I/O range 0xde00-0xdeff: in range map[24]: type Memory, range 32, base rxfdd00000, size 20, enabled pcib1: requested memory range 0xfdd00000-0xfddfffff: good pcib1: matched entry for 1.5.INTA pcib1: slot 5 INTA hardwired to IRQ 18 vgapci0: <VGA-compatible display> port 0xde00-0xdeff mem 0xd0000000-0xdfffffff,0xfdef0000-0xfdefffff,0xfdd00000-0xfddfffff irq 18 at device 5.0 on pci1 pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xe000-0xefff pcib2: memory decode 0xfdc00000-0xfdcfffff pcib2: prefetched decode 0xfdf00000-0xfdffffff pci2: <ACPI PCI bus> on pcib2 pci2: domain=3D0, physical bus=3D2 found-> vendor=3D0x11ab, dev=3D0x4364, revid=3D0x20 domain=3D0, bus=3D2, slot=3D0, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D1 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) intpin=3Da, irq=3D10 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base rxfdcfc000, size 14, enabled pcib2: requested memory range 0xfdcfc000-0xfdcfffff: good map[18]: type I/O Port, range 32, base rxee00, size 8, enabled pcib2: requested I/O range 0xee00-0xeeff: in range pcib2: matched entry for 2.0.INTA pcib2: slot 0 INTA hardwired to IRQ 19 mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xee00-0xeeff mem 0xfdcfc000-0xfdcfffff irq 19 at device 0.0 on pci2 mskc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfdcfc000 mskc0: MSI count : 1 mskc0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to vector 49 mskc0: using IRQ 256 for MSI mskc0: RAM buffer size : 128KB mskc0: Port 0 : Rx Queue 85KB(0x00000000:0x000153ff) mskc0: Port 0 : Tx Queue 43KB(0x00015400:0x0001ffff) msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on mskc0 msk0: bpf attached msk0: Ethernet address: 00:1c:25:84:48:f5 miibus0: <MII bus> on msk0 e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto mskc0: [MPSAFE] mskc0: [FILTER] atapci0: <ATI IXP600 SATA300 controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 18.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfb00 atapci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfe02f000 ioapic0: routing intpin 22 (PCI IRQ 22) to vector 50 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: AHCI Version 01.10 controller with 4 ports PM supported ata2: <ATA channel 0> on atapci0 ata2: SATA connect time=3D0ms ata2: SIGNATURE: 00000101 ata2: ahci_reset devices=3D00000001 ata2: [MPSAFE] ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: SATA connect time=3D0ms ata3: SIGNATURE: eb140101 ata3: ahci_reset devices=3D00010000 ata3: [MPSAFE] ata3: [ITHREAD] ata4: <ATA channel 2> on atapci0 ata4: SATA connect status=3D00000000 ata4: phy reset found no device ata4: [MPSAFE] ata4: [ITHREAD] ata5: <ATA channel 3> on atapci0 ata5: SATA connect status=3D00000000 ata5: phy reset found no device ata5: [MPSAFE] ata5: [ITHREAD] ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 16 at device 19.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02e000 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 51 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 17 at device 19.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02d000 ioapic0: routing intpin 17 (PCI IRQ 17) to vector 52 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ohci2: <OHCI (generic) USB controller> mem 0xfe02c000-0xfe02cfff irq 18 at device 19.2 on pci0 ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02c000 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 53 ohci2: [GIANT-LOCKED] ohci2: [ITHREAD] usb2: OHCI version 1.0, legacy support usb2: SMM does not respond, resetting usb2: <OHCI (generic) USB controller> on ohci2 usb2: USB revision 1.0 uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ohci3: <OHCI (generic) USB controller> mem 0xfe02b000-0xfe02bfff irq 17 at device 19.3 on pci0 ohci3: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02b000 ohci3: [GIANT-LOCKED] ohci3: [ITHREAD] usb3: OHCI version 1.0, legacy support usb3: SMM does not respond, resetting usb3: <OHCI (generic) USB controller> on ohci3 usb3: USB revision 1.0 uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered ohci4: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 19.4 on pci0 ohci4: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02a000 ohci4: [GIANT-LOCKED] ohci4: [ITHREAD] usb4: OHCI version 1.0, legacy support usb4: SMM does not respond, resetting usb4: <OHCI (generic) USB controller> on ohci4 usb4: USB revision 1.0 uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq 19 at device 19.5 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe029000 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 54 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] ehci0: Dropped interrupts workaround enabled usb5: EHCI version 1.0 usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4 usb5: <EHCI (generic) USB 2.0 controller> on ehci0 usb5: USB revision 2.0 uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5 uhub5: 10 ports with 10 removable, self powered pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf900-0xf90f at device 20.1 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf900 ata0: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=3D00 ostat0=3Dff ostat1=3Dff ioapic0: routing intpin 14 (ISA IRQ 14) to vector 55 ata0: [MPSAFE] ata0: [ITHREAD] pci0: <multimedia> at device 20.2 (no driver attached) isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xc000-0xcfff pcib3: memory decode 0xfdb00000-0xfdbfffff pcib3: prefetched decode 0xfda00000-0xfdafffff pcib3: Subtractively decoded bridge. pci3: <ACPI PCI bus> on pcib3 pci3: domain=3D0, physical bus=3D3 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 device_attach: acpi_hpet0 attach returned 12 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode powernow0: <PowerNow! K8> on cpu0 cpu1: <ACPI CPU> on acpi0 powernow1: <PowerNow! K8> on cpu1 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 ioapic0: routing intpin 6 (ISA IRQ 6) to vector 56 fdc0: [FILTER] sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57 sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ioapic0: routing intpin 3 (ISA IRQ 3) to vector 58 sio1: [FILTER] psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 59 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to vector 60 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model NetMouse/NetScroll Optical, device ID 0-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 device_attach: acpi_hpet0 attach returned 12 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() ahc_isa_probe 0: ioport 0xc00 alloc failed ata: ata0 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xcd000-0xcdfff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) ata1 failed to probe at port 0x170 irq 15 on isa0 bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 ioapic0: routing intpin 7 (ISA IRQ 7) to vector 61 ppbus0: [MPSAFE] ppbus0: [ITHREAD] plip0: <PLIP network interface> on ppbus0 plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 118117 -> 100000 procfs registered lapic: Divisor 2, Frequency 99750572 hz Timecounter "TSC" frequency 2194512323 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. ata0: identify ch->devices=3D00000000 ata2: identify ch->devices=3D00000001 fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout ata2-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA133 cable=3D40 wire ad4: 152627MB <Seagate ST3160815AS 3.AAE> at ata2-master SATA300 ad4: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad4 ad4: Silicon Image check3 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ata3: identify ch->devices=3D00010000 ata3-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D40 wire ata3: device_reset timeout=3D540us acd0: <ATAPI DVD A DH16A3S/3A12> DVDR drive at ata3 as master acd0: read 8269KB/s (2067KB/s) write 8269KB/s (8269KB/s), 2048KB buffer, SATA150 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata4: identify ch->devices=3D00000000 ata5: identify ch->devices=3D00000000 ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ioapic0: Assigning ISA IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 3 to local APIC 1 ioapic0: Assigning ISA IRQ 4 to local APIC 0 ioapic0: Assigning ISA IRQ 6 to local APIC 1 ioapic0: Assigning ISA IRQ 7 to local APIC 0 ioapic0: Assigning ISA IRQ 9 to local APIC 1 ioapic0: Assigning ISA IRQ 12 to local APIC 0 ioapic0: Assigning ISA IRQ 14 to local APIC 1 ioapic0: Assigning PCI IRQ 16 to local APIC 0 ioapic0: Assigning PCI IRQ 17 to local APIC 1 ioapic0: Assigning PCI IRQ 18 to local APIC 0 ioapic0: Assigning PCI IRQ 19 to local APIC 1 ioapic0: Assigning PCI IRQ 22 to local APIC 0 msi: Assigning MSI IRQ 256 to local APIC 1 WARNING: WITNESS option enabled, expect reduced performance. lock order reversal: (sleepable after non-sleepable) 1st 0xc506201c struct mount mtx (struct mount mtx) @ /usr/src/sys/kern/vfs_subr.c:343 2nd 0xc5062000 vfslock (vfslock) @ /usr/src/sys/kern/vfs_subr.c:370 KDB: stack backtrace: db_trace_self_wrapper(c0b1dc7b,c4a68b6c,c07b13ee,c0b204d6,c5062000,...) at db_trace_self_wrapper+0x26 kdb_backtrace(c0b204d6,c5062000,c0b2637c,c0b2637c,c0b26919,...) at kdb_backtrace+0x29 witness_checkorder(c5062000,1,c0b26919,172,c0b1985b,...) at witness_checkorder+0x6de __lockmgr_args(c5062000,200100,c506201c,0,0,...) at __lockmgr_args+0x220 vfs_busy(c5062000,200,0,c4c8fcc0,1,...) at vfs_busy+0x1bc vfs_mount_alloc(0,c0bd0940,c0b266bf,c4c8fcc0,c07eed80,...) at vfs_mount_alloc+0x78 vfs_mountroot(c0c410d0,4,c0b15868,264,c4a68cc4,...) at vfs_mountroot+0x26c start_init(0,c4a68d38,c0b171ff,30d,c4c8dcf8,...) at start_init+0x65 fork_exit(c073d1a0,0,c4a68d38) at fork_exit+0xb8 fork_trampoline() at fork_trampoline+0x8 --- trap 0, eip =3D 0, esp =3D 0xc4a68d70, ebp =3D 0 --- lock order reversal: (sleepable after non-sleepable) 1st 0xc506528c vnode interlock (vnode interlock) @ /usr/src/sys/fs/devfs/devfs_vnops.c:197 2nd 0xc5065270 devfs (devfs) @ /usr/src/sys/kern/vfs_subr.c:2044 KDB: stack backtrace: db_trace_self_wrapper(c0b1dc7b,c4a68a98,c07b13ee,c0b204d6,c5065270,...) at db_trace_self_wrapper+0x26 kdb_backtrace(c0b204d6,c5065270,c0b1121b,c0b1121b,c0b26919,...) at kdb_backtrace+0x29 witness_checkorder(c5065270,9,c0b26919,7fc,c5065270,...) at witness_checkorder+0x6de __lockmgr_args(c5065270,80100,c506528c,0,0,...) at __lockmgr_args+0x777 vop_stdlock(c4a68b90,c0b113f8,c0b1457f,80100,c5065218,...) at vop_stdlock+0x62 VOP_LOCK1_APV(c0bd09c0,c4a68b90,c0c0fc40,c5065218,80100,...) at VOP_LOCK1_APV+0xa5 _vn_lock(c5065218,80100,c0b26919,7fc,c0b113f8,...) at _vn_lock+0x5e vget(c5065218,80100,c4c8fcc0,c6,c50391d4,...) at vget+0x9c devfs_allocv(c5037200,c5062000,c4a68c20,c4c8fcc0,c4c8fd64,...) at devfs_allocv+0x11d devfs_root(c5062000,80000,c0c94334,c4c8fcc0,4,...) at devfs_root+0x51 set_rootvnode(c0c94320,0,c0b2627e,5f6,c07eed80,...) at set_rootvnode+0x2d vfs_mountroot(c0c410d0,4,c0b15868,264,c4a68cc4,...) at vfs_mountroot+0x34c start_init(0,c4a68d38,c0b171ff,30d,c4c8dcf8,...) at start_init+0x65 fork_exit(c073d1a0,0,c4a68d38) at fork_exit+0xb8 fork_trampoline() at fork_trampoline+0x8 --- trap 0, eip =3D 0, esp =3D 0xc4a68d70, ebp =3D 0 --- lock order reversal: 1st 0xc5065270 devfs (devfs) @ /usr/src/sys/kern/vfs_subr.c:2044 2nd 0xc50391d4 devfsmount (devfsmount) @ /usr/src/sys/fs/devfs/devfs_vnops.c:201 KDB: stack backtrace: db_trace_self_wrapper(c0b1dc7b,c4a68bb4,c07b13ee,c0b204d6,c50391d4,...) at db_trace_self_wrapper+0x26 kdb_backtrace(c0b204d6,c50391d4,c0b113b7,c0b113b7,c0b113f8,...) at kdb_backtrace+0x29 witness_checkorder(c50391d4,9,c0b113f8,c9,c7,...) at witness_checkorder+0x6de _sx_xlock(c50391d4,0,c0b113f8,c9,c50391d4,...) at _sx_xlock+0x7d devfs_allocv(c5037200,c5062000,c4a68c20,c4c8fcc0,c4c8fd64,...) at devfs_allocv+0x142 devfs_root(c5062000,80000,c0c94334,c4c8fcc0,4,...) at devfs_root+0x51 set_rootvnode(c0c94320,0,c0b2627e,5f6,c07eed80,...) at set_rootvnode+0x2d vfs_mountroot(c0c410d0,4,c0b15868,264,c4a68cc4,...) at vfs_mountroot+0x34c start_init(0,c4a68d38,c0b171ff,30d,c4c8dcf8,...) at start_init+0x65 fork_exit(c073d1a0,0,c4a68d38) at fork_exit+0xb8 fork_trampoline() at fork_trampoline+0x8 --- trap 0, eip =3D 0, esp =3D 0xc4a68d70, ebp =3D 0 --- Trying to mount root from ufs:/dev/ad4s1a ct_to_ts([2008-05-17 10:00:58]) =3D 1211018458.000000000 lock order reversal: (sleepable after non-sleepable) 1st 0xc4f67c2c bufobj interlock (bufobj interlock) @ /usr/src/sys/kern/vfs_bio.c:2442 2nd 0xd8ce5c80 bufwait (bufwait) @ /usr/src/sys/kern/vfs_bio.c:2456 KDB: stack backtrace: db_trace_self_wrapper(c0b1dc7b,c4a68790,c07b13ee,c0b204d6,d8ce5c80,...) at db_trace_self_wrapper+0x26 kdb_backtrace(c0b204d6,d8ce5c80,c0b25247,c0b25247,c0b247f6,...) at kdb_backtrace+0x29 witness_checkorder(d8ce5c80,9,c0b247f6,998,c0b1985b,...) at witness_checkorder+0x6de __lockmgr_args(d8ce5c80,81900,c4f67c2c,c0b251a3,50,...) at __lockmgr_args+0x777 getblk(c4f67b84,0,0,800,0,...) at getblk+0x153 breadn(c4f67b84,0,0,800,0,...) at breadn+0x44 bread(c4f67b84,0,0,800,0,...) at bread+0x4c ffs_blkatoff(c4f67b84,0,0,0,c4a689a8,...) at ffs_blkatoff+0xd1 ufs_lookup(c4a689ec,c4f67b84,c4a68b50,c4f67b84,c4a68a0c,...) at ufs_lookup+0x2b5 VOP_CACHEDLOOKUP_APV(c0bf75a0,c4a689ec,c4a68b50,c4a68b3c,c4c5d300,...) at VOP_CACHEDLOOKUP_APV+0xa5 vfs_cache_lookup(c4a68a6c,c4a68a6c,500000c,80000,c4f67b84,...) at vfs_cache_lookup+0xd0 VOP_LOOKUP_APV(c0bf75a0,c4a68a6c,c0b2602c,1b0,c4a68b3c,...) at VOP_LOOKUP_APV+0xa5 lookup(c4a68b24,c0b2602c,d8,c0,c4c5d42c,...) at lookup+0x57e namei(c4a68b24,c4a68b28,c07b0bcc,c07681ac,c0c93bd0,...) at namei+0x44b kern_unlinkat(c4c8fcc0,ffffff9c,c0b266bb,1,c4a68c5c,...) at kern_unlinkat+0x46 kern_unlink(c4c8fcc0,c0b266bb,1,631,0,...) at kern_unlink+0x27 vfs_mountroot_try(c0b26875,c0b14581,c0b0d031,1,c07eed80,...) at vfs_mountroot_try+0x472 vfs_mountroot(c0c410d0,4,c0b15868,264,c4a68cc4,...) at vfs_mountroot+0x40e start_init(0,c4a68d38,c0b171ff,30d,c4c8dcf8,...) at start_init+0x65 fork_exit(c073d1a0,0,c4a68d38) at fork_exit+0xb8 fork_trampoline() at fork_trampoline+0x8 --- trap 0, eip =3D 0, esp =3D 0xc4a68d70, ebp =3D 0 --- start_init: trying /sbin/init fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout Linux ELF exec handler installed
State Changed From-To: feedback->open Note that feedback was received.
I did a bit more investigation in this area.=20 The only place where the "AP #1 (PHY# 1) failed!" appears, is in=20 /usr/src/sys/i386/i386/mp_machdep.c:774 if (!start_ap(apic_id)) { printf("AP #%d (PHY# %d) failed!\n", cpu, apic_id); CHECK_PRINT("trace"); /* show checkpoints */ /* better panic as the AP may be running loose */ printf("panic y/n? [y] "); if (cngetc() !=3D 'n') panic("bye-bye"); } And the panic-code is only triggered, if start_ap returns 0, which appears towards the end of start_ap: /* Wait up to 5 seconds for it to start. */ for (ms =3D 0; ms < 5000; ms++) { if (mp_naps > cpus) return 1; /* return SUCCESS */ DELAY(1000); } return 0; /* return FAILURE */ Unfortunately I have no idea on how to tackle this issue ... Tobias
State Changed From-To: open->feedback Can you still reproduce this on a supported release?
Hi jh - unfortunately the system in question was gutted recently and I can't go back to test things again. Before I gutted it, I attempted to install pfsense, which is based on 8.1RC and saw the same misbehavior. I have a feeling if I tried it with the most recent RC of FreeBSD I would still see the same error. Thanks - Tobias
State Changed From-To: feedback->open Feedback received.
For bugs matching the following criteria: Status: In Progress Changed: (is less than) 2014-06-01 Reset to default assignee and clear in-progress tags. Mail being skipped
^Triage: OBE, no longer able to test on reported system