I have 2 Intel Servers. The first: bizon# dmesg Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-PRERELEASE #0: Mon Oct 27 08:06:49 VLAT 2008 daddy@bizon.podryad.tv:/usr/obj/usr/src/sys/BIZON Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz (2339.15-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x10676 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xce3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,< b19>> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> Cores per package: 4 usable memory = 4275474432 (4077 MB) avail memory = 4089028608 (3899 MB) ACPI APIC Table: <INTEL S5000PSL> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard lapic0: Forcing LINT1 to edge trigger kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <INTEL S5000PSL> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 acpi_button0: <Sleep Button> on acpi0 acpi_button1: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xca2,0xca3,0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2 pci4: <ACPI PCI bus> on pcib4 em0: <Intel(R) PRO/1000 Network Connection 6.9.5> port 0x2020-0x203f mem 0xb8820 000-0xb883ffff,0xb8400000-0xb87fffff irq 18 at device 0.0 on pci4 em0: Using MSI interrupt em0: [FILTER] em0: Ethernet address: 00:15:17:55:7f:50 em1: <Intel(R) PRO/1000 Network Connection 6.9.5> port 0x2000-0x201f mem 0xb8800 000-0xb881ffff,0xb8000000-0xb83fffff irq 19 at device 0.1 on pci4 em1: Using MSI interrupt em1: [FILTER] em1: Ethernet address: 00:15:17:55:7f:51 pcib5: <ACPI PCI-PCI bridge> at device 0.3 on pci1 pci5: <ACPI PCI bus> on pcib5 pcib6: <PCI-PCI bridge> at device 3.0 on pci0 pci6: <PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci7: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pci8: <ACPI PCI bus> on pcib8 pcib9: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci9: <ACPI PCI bus> on pcib9 pcib10: <PCI-PCI bridge> at device 7.0 on pci0 pci10: <PCI bus> on pcib10 pci0: <base peripheral> at device 8.0 (no driver attached) pcib11: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci11: <ACPI PCI bus> on pcib11 uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x30a0-0x30bf irq 23 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x3080-0x309f irq 22 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x3060-0x307f irq 23 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0x3040-0x305f irq 22 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3 usb3: USB revision 1.0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xb8b00400-0xb8b007ff irq 23 at de vice 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 63XXESB USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 uhub4: 8 ports with 8 removable, self powered pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci12: <ACPI PCI bus> on pcib12 vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0xb0000000-0xb7ffffff,0 xb8a00000-0xb8a0ffff irq 17 at device 12.0 on pci12 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177, 0x376,0x30c0-0x30cf irq 20 at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] atapci1: <Intel AHCI controller> port 0x30d8-0x30df,0x30f4-0x30f7,0x30d0-0x30d7, 0x30f0-0x30f3,0x3020-0x303f mem 0xb8b00000-0xb8b003ff irq 20 at device 31.2 on p ci0 atapci1: [ITHREAD] atapci1: AHCI Version 01.10 controller with 6 ports detected ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] ata4: <ATA channel 2> on atapci1 ata4: [ITHREAD] ata5: <ATA channel 3> on atapci1 ata5: [ITHREAD] ata6: <ATA channel 4> on atapci1 ata6: [ITHREAD] ata7: <ATA channel 5> on atapci1 ata7: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A sio1: [FILTER] cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 cpu2: <ACPI CPU> on acpi0 est2: <Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2: <CPU Frequency Thermal Control> on cpu2 cpu3: <ACPI CPU> on acpi0 est3: <Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3: <CPU Frequency Thermal Control> on cpu3 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xcafff,0xcb000-0xcbfff ,0xcc000-0xccfff on isa0 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec ad0: 58643MB <Maxtor 6Y060L0 YAR41BW0> at ata0-master UDMA100 ad4: 476940MB <Seagate ST3500630NS 3.AEK> at ata2-master SATA300 ad6: 476940MB <Seagate ST3500630NS 3.AEK> at ata3-master SATA300 ad8: 476940MB <Seagate ST3500630NS 3.AEK> at ata4-master SATA300 ad10: 476940MB <Seagate ST3500630NS 3.AEK> at ata5-master SATA300 ad12: 476940MB <Seagate ST3500630NS 3.AEK> at ata6-master SATA150 ad14: 476940MB <Seagate ST3500630NS 3.AEK> at ata7-master SATA300 lapic1: Forcing LINT1 to edge trigger SMP: AP CPU #1 Launched! lapic3: Forcing LINT1 to edge trigger SMP: AP CPU #3 Launched! lapic2: Forcing LINT1 to edge trigger SMP: AP CPU #2 Launched! Trying to mount root from ufs:/dev/ad0s1a This module (opensolaris) contains code covered by the Common Development and Distribution License (CDDL) see http://opensolaris.org/os/licensing/opensolaris_license/ WARNING: ZFS is considered to be an experimental feature in FreeBSD. ZFS filesystem version 6 ZFS storage pool version 6 em1: link state changed to UP em0: link state changed to UP Next lines are added to /boot/loader. vm.kmem_size_max="1536M" vm.kmem_size="1536M" There is zfs. bizon# zpool status pool: tank state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM tank ONLINE 0 0 0 raidz1 ONLINE 0 0 0 ad14 ONLINE 0 0 0 ad12 ONLINE 0 0 0 ad10 ONLINE 0 0 0 ad8 ONLINE 0 0 0 ad6 ONLINE 0 0 0 ad4 ONLINE 0 0 0 errors: No known data errors bizon# zpool iostat -v capacity operations bandwidth pool used avail read write read write ---------- ----- ----- ----- ----- ----- ----- tank 2,13T 604G 0 0 55 559 raidz1 2,13T 604G 0 0 55 559 ad14 - - 0 0 651 123 ad12 - - 0 0 677 112 ad10 - - 0 0 757 123 ad8 - - 0 0 731 114 ad6 - - 0 0 729 125 ad4 - - 0 0 808 116 ---------- ----- ----- ----- ----- ----- ----- And there's no problem at all with zfs. But second sever: crocodile# dmesg Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-PRERELEASE #3: Wed Oct 8 12:32:37 VLAST 2008 daddy@crocodile.podryad.tv:/usr/obj/usr/src/sys/CROC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz (2339.15-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x10676 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xce3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,<b19>> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> Cores per package: 4 usable memory = 8569413632 (8172 MB) avail memory = 8256241664 (7873 MB) ACPI APIC Table: <INTEL S5000PSL> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard lapic0: Forcing LINT1 to edge trigger kbd1 at kbdmux0 netsmb_dev: loaded kqemu version 0x00010300 kqemu: KQEMU installed, max_locked_mem=4184284kB. ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <INTEL S5000PSL> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xca2,0xca3,0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 17 at device 1.0 on pci2 pci4: <ACPI PCI bus> on pcib4 mpt0: <LSILogic SAS/SATA Adapter> port 0x3000-0x30ff mem 0xb8910000-0xb8913fff,0xb8900000-0xb890ffff irq 17 at device 0.0 on pci4 mpt0: [ITHREAD] mpt0: MPI Version=1.5.14.0 pcib5: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2 pci5: <ACPI PCI bus> on pcib5 em0: <Intel(R) PRO/1000 Network Connection 6.9.5> port 0x2020-0x203f mem 0xb8820000-0xb883ffff,0xb8400000-0xb87fffff irq 18 at device 0.0 on pci5 em0: Using MSI interrupt em0: [FILTER] em0: Ethernet address: 00:15:17:65:78:c0 em1: <Intel(R) PRO/1000 Network Connection 6.9.5> port 0x2000-0x201f mem 0xb8800000-0xb881ffff,0xb8000000-0xb83fffff irq 19 at device 0.1 on pci5 em1: Using MSI interrupt em1: [FILTER] em1: Ethernet address: 00:15:17:65:78:c1 pcib6: <ACPI PCI-PCI bridge> at device 0.3 on pci1 pci6: <ACPI PCI bus> on pcib6 pcib7: <PCI-PCI bridge> at device 3.0 on pci0 pci7: <PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci8: <ACPI PCI bus> on pcib8 pcib9: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pci9: <ACPI PCI bus> on pcib9 pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci10: <ACPI PCI bus> on pcib10 pcib11: <PCI-PCI bridge> at device 7.0 on pci0 pci11: <PCI bus> on pcib11 pci0: <base peripheral> at device 8.0 (no driver attached) pcib12: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci12: <ACPI PCI bus> on pcib12 uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x40a0-0x40bf irq 23 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x4080-0x409f irq 22 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x4060-0x407f irq 23 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0x4040-0x405f irq 22 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3 usb3: USB revision 1.0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xb8c00400-0xb8c007ff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 63XXESB USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 uhub4: 8 ports with 8 removable, self powered pcib13: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci13: <ACPI PCI bus> on pcib13 vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0xb0000000-0xb7ffffff,0xb8b00000-0xb8b0ffff irq 17 at device 12.0 on pci13 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40c0-0x40cf irq 20 at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] atapci1: <Intel AHCI controller> port 0x40d8-0x40df,0x40f4-0x40f7,0x40d0-0x40d7,0x40f0-0x40f3,0x4020-0x403f mem 0xb8c00000-0xb8c003ff irq 20 at device 31.2 on pci0 atapci1: [ITHREAD] atapci1: AHCI Version 01.10 controller with 6 ports detected ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] ata4: <ATA channel 2> on atapci1 ata4: [ITHREAD] ata5: <ATA channel 3> on atapci1 ata5: [ITHREAD] ata6: <ATA channel 4> on atapci1 ata6: [ITHREAD] ata7: <ATA channel 5> on atapci1 ata7: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 cpu2: <ACPI CPU> on acpi0 est2: <Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2: <CPU Frequency Thermal Control> on cpu2 cpu3: <ACPI CPU> on acpi0 est3: <Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3: <CPU Frequency Thermal Control> on cpu3 cpu4: <ACPI CPU> on acpi0 est4: <Enhanced SpeedStep Frequency Control> on cpu4 p4tcc4: <CPU Frequency Thermal Control> on cpu4 cpu5: <ACPI CPU> on acpi0 est5: <Enhanced SpeedStep Frequency Control> on cpu5 p4tcc5: <CPU Frequency Thermal Control> on cpu5 cpu6: <ACPI CPU> on acpi0 est6: <Enhanced SpeedStep Frequency Control> on cpu6 p4tcc6: <CPU Frequency Thermal Control> on cpu6 cpu7: <ACPI CPU> on acpi0 est7: <Enhanced SpeedStep Frequency Control> on cpu7 p4tcc7: <CPU Frequency Thermal Control> on cpu7 acpi_button0: <Sleep Button> on acpi0 acpi_button1: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A sio1: [FILTER] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xd1000-0xd1fff,0xd2000-0xd2fff on isa0 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec ad4: 476940MB <Seagate ST3500630NS 3.AEK> at ata2-master SATA300 ad6: 476940MB <Seagate ST3500630NS 3.AEK> at ata3-master SATA300 GEOM_MIRROR: Device mirror/gm0 launched (2/2). ses0 at mpt0 bus 0 target 19 lun 0 ses0: <ESG-SHV. SCA HSBP M1..... 2.02> Fixed Enclosure Services SCSI-3 device ses0: 300.000MB/s transfers ses0: SCSI-3 SES Device ses1 at mpt0 bus 0 target 26 lun 0 ses1: <ESG-SHV. SCA HSBP M2..... 2.02> Fixed Enclosure Services SCSI-3 device ses1: 300.000MB/s transfers ses1: SCSI-3 SES Device da0 at mpt0 bus 0 target 11 lun 0 da0: <ATA ST3750330NS SN05> Fixed Direct Access SCSI-5 device da0: 300.000MB/s transfers da0: Command Queueing Enabled da0: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) da1 at mpt0 bus 0 target 12 lun 0 da1: <ATA ST3750330NS SN05> Fixed Direct Access SCSI-5 device da1: 300.000MB/s transfers da1: Command Queueing Enabled da1: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) da2 at mpt0 bus 0 target 13 lun 0 da2: <ATA ST3750330NS SN05> Fixed Direct Access SCSI-5 device da2: 300.000MB/s transfers da2: Command Queueing Enabled da2: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) da3 at mpt0 bus 0 target 14 lun 0 da3: <ATA ST3750330NS SN05> Fixed Direct Access SCSI-5 device da3: 300.000MB/s transfers da3: Command Queueing Enabled da3: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) da4 at mpt0 bus 0 target 15 lun 0 da4: <ATA ST3750330NS SN05> Fixed Direct Access SCSI-5 device da4: 300.000MB/s transfers da4: Command Queueing Enabled da4: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) da5 at mpt0 bus 0 target 16 lun 0 da5: <ATA ST3750330NS SN05> Fixed Direct Access SCSI-5 device da5: 300.000MB/s transfers da5: Command Queueing Enabled da5: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) lapic1: Forcing LINT1 to eddag6e attr imgpgte0r b us 0 target 20 lun 0 da6: <ATA ST3750330NS SN04> Fixed Direct Access SCSI-5 device da6: 300.000MB/s transfers da6: Command Queueing Enabled da6: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) da7 at mpt0 bus 0 target 21 lun 0 da7: <ATA ST3750330NS SN05> Fixed Direct Access SCSI-5 device da7: 300.000MB/s transfers da7: Command Queueing Enabled da7: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201CS)MP : dAaP8 CaPtU m#pt10 Lbauusn c0h etda!r getl a2p2i cl3u:n F0or cdian8g: L<IANTTA1 StTo3 7e5d0g3e3 0tNrSi gSgNe0r5 > Fixed Direct Access SCSI-5 device da8: 300.000MB/s transfers da8: Command Queueing Enabled da8: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) da9 at mpt0 bus 0 target 23 lun 0 da9: <ATA ST3750330NS SN05> Fixed Direct Access SCSI-5 device da9: 300.000MB/s transfers da9: Command Queueing Enabled SdMaP:9 :A P7 1C5P4U0 4#MB3 (L1a4u6n5c1h4e9d1!6 8 l5a1pi2c b2y:t eF osreccitnogr sL:I N2T515 Ht o6 3eSd/gTe 9t1r2i0g1gCe)r SMP: AP CPU #2 Launched! lapic6: Forcing LINT1 to edge trigger SMP: AP CPU #6 Launched! lapic4: Forcing LINT1 to edge trigger SMP: AP CPU #4 Launched! lapic7: Forcing LINT1 to edge trigger SMP: AP CPU #7 Launched! lapic5: Forcing LINT1 to edge trigger SMP: AP CPU #5 Launched! Trying to mount root from ufs:/dev/mirror/gm0s1a This module (opensolaris) contains code covered by the Common Development and Distribution License (CDDL) see http://opensolaris.org/os/licensing/opensolaris_license/ WARNING: ZFS is considered to be an experimental feature in FreeBSD. ZFS filesystem version 6 ZFS storage pool version 6 tap0: Ethernet address: 00:bd:5d:1c:00:00 bridge0: Ethernet address: be:d2:f0:29:b9:14 mpt0: request 0xffffffff810527a0:32071 timed out for ccb 0xffffff00052cb000 (req->ccb 0xffffff00052cb000) mpt0: request 0xffffffff81055e30:32072 timed out for ccb 0xffffff0004e39000 (req->ccb 0xffffff0004e39000) mpt0: attempting to abort req 0xffffffff810527a0:32071 function 0 mpt0: request 0xffffffff81057780:32087 timed out for ccb 0xffffff00055c9400 (req->ccb 0xffffff00055c9400) ......................................... mpt0: request 0xffffffff81050430:32599 timed out for ccb 0xffffff0005488000 (req->ccb 0xffffff0005488000) mpt0: mpt_wait_req(1) timed out mpt0: mpt_recover_commands: abort timed-out. Resetting controller mpt0: mpt_cam_event: 0x0 mpt0: mpt_cam_event: 0x0 mpt0: completing timedout/aborted req 0xffffffff810527a0:32071 mpt0: completing timedout/aborted req 0xffffffff81055e30:32072 mpt0: completing timedout/aborted req 0xffffffff81057780:32087 ..................................................... mpt0: completing timedout/aborted req 0xffffffff81050430:32599 mpt0: mpt_cam_event: 0x16 mpt0: mpt_cam_event: 0x12 mpt0: mpt_cam_event: 0x12 mpt0: mpt_cam_event: 0x12 mpt0: mpt_cam_event: 0x1b mpt0: mpt_cam_event: 0x12 ...................................... mpt0: mpt_cam_event: 0x12 mpt0: mpt_cam_event: 0x12 mpt0: mpt_cam_event: 0x16 (da3:mpt0:0:14:0): WRITE(10). CDB: 2a 0 0 55 fb dd 0 0 80 0 (da3:mpt0:0:14:0): CAM Status: SCSI Status Error (da3:mpt0:0:14:0): SCSI Status: Check Condition (da3:mpt0:0:14:0): UNIT ATTENTION asc:29,0 (da3:mpt0:0:14:0): Power on, reset, or bus device reset occurred (da3:mpt0:0:14:0): Retrying Command (per Sense Data) (da7:mpt0:0:21:0): WRITE(10). CDB: 2a 0 0 58 0 ea 0 0 4 0 (da7:mpt0:0:21:0): CAM Status: SCSI Status Error (da7:mpt0:0:21:0): SCSI Status: Check Condition (da7:mpt0:0:21:0): UNIT ATTENTION asc:29,0 (da7:mpt0:0:21:0): Power on, reset, or bus device reset occurred (da7:mpt0:0:21:0): Retrying Command (per Sense Data) (da6:mpt0:0:20:0): WRITE(10). CDB: 2a 0 0 58 0 ea 0 0 4 0 (da6:mpt0:0:20:0): CAM Status: SCSI Status Error (da6:mpt0:0:20:0): SCSI Status: Check Condition (da6:mpt0:0:20:0): UNIT ATTENTION asc:29,0 (da6:mpt0:0:20:0): Power on, reset, or bus device reset occurred (da6:mpt0:0:20:0): Retrying Command (per Sense Data) (da8:mpt0:0:22:0): WRITE(10). CDB: 2a 0 0 58 0 ea 0 0 4 0 (da8:mpt0:0:22:0): CAM Status: SCSI Status Error (da8:mpt0:0:22:0): SCSI Status: Check Condition (da8:mpt0:0:22:0): UNIT ATTENTION asc:29,0 (da8:mpt0:0:22:0): Power on, reset, or bus device reset occurred (da8:mpt0:0:22:0): Retrying Command (per Sense Data) (da0:mpt0:0:11:0): WRITE(10). CDB: 2a 0 0 58 0 eb 0 0 4 0 (da0:mpt0:0:11:0): CAM Status: SCSI Status Error (da0:mpt0:0:11:0): SCSI Status: Check Condition (da0:mpt0:0:11:0): UNIT ATTENTION asc:29,0 (da0:mpt0:0:11:0): Power on, reset, or bus device reset occurred (da0:mpt0:0:11:0): Retrying Command (per Sense Data) (da1:mpt0:0:12:0): WRITE(10). CDB: 2a 0 0 58 0 eb 0 0 4 0 (da1:mpt0:0:12:0): CAM Status: SCSI Status Error (da1:mpt0:0:12:0): SCSI Status: Check Condition (da1:mpt0:0:12:0): UNIT ATTENTION asc:29,0 (da1:mpt0:0:12:0): Power on, reset, or bus device reset occurred (da1:mpt0:0:12:0): Retrying Command (per Sense Data) (da2:mpt0:0:13:0): WRITE(10). CDB: 2a 0 0 58 0 eb 0 0 4 0 (da2:mpt0:0:13:0): CAM Status: SCSI Status Error (da2:mpt0:0:13:0): SCSI Status: Check Condition (da2:mpt0:0:13:0): UNIT ATTENTION asc:29,0 (da2:mpt0:0:13:0): Power on, reset, or bus device reset occurred (da2:mpt0:0:13:0): Retrying Command (per Sense Data) (da4:mpt0:0:15:0): WRITE(10). CDB: 2a 0 0 58 0 eb 0 0 4 0 (da4:mpt0:0:15:0): CAM Status: SCSI Status Error (da4:mpt0:0:15:0): SCSI Status: Check Condition (da4:mpt0:0:15:0): UNIT ATTENTION asc:29,0 (da4:mpt0:0:15:0): Power on, reset, or bus device reset occurred (da4:mpt0:0:15:0): Retrying Command (per Sense Data) (da5:mpt0:0:16:0): WRITE(10). CDB: 2a 0 0 58 0 eb 0 0 4 0 (da5:mpt0:0:16:0): CAM Status: SCSI Status Error (da5:mpt0:0:16:0): SCSI Status: Check Condition (da5:mpt0:0:16:0): UNIT ATTENTION asc:29,0 (da5:mpt0:0:16:0): Power on, reset, or bus device reset occurred (da5:mpt0:0:16:0): Retrying Command (per Sense Data) /boot/loader.conf has the same lines. vm.kmem_size_max="1536M" vm.kmem_size="1536M" There is pool: crocodile# zpool status pool: tank state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM tank ONLINE 0 0 0 da0 ONLINE 0 0 0 da1 ONLINE 0 0 0 da2 ONLINE 0 0 0 da3 ONLINE 0 0 0 da4 ONLINE 0 0 0 da5 ONLINE 0 0 0 da6 ONLINE 0 0 0 da7 ONLINE 0 0 0 da8 ONLINE 0 0 0 da9 ONLINE 0 0 0 errors: No known data errors crocodile# zpool list NAME SIZE USED AVAIL CAP HEALTH ALTROOT tank 6,80T 1,78T 5,02T 26% ONLINE - It's work, but with many exeptions of mpt0. If I made raidz pool, the system hangs up with kernel panic, duping copying files to the pool, with "kmem_map too small" and with the same exeptions of mpt0 around. And there's no matter how many HDD are in the pool 4, 6, 9 or 10. How to make raidz with LSILogic SAS/SATA Adapters?
Responsible Changed From-To: freebsd-bugs->freebsd-fs Over to maintainer(s).
State Changed From-To: open->feedback Could you try adding vfs.zfs.cache_flush_disable=1 to your /boot/loader.conf and see i that helps? It will prevent ZFS from sending write flush requests to the disks.
Responsible Changed From-To: freebsd-fs->pjd I'll take this one.
For bugs matching the following criteria: Status: In Progress Changed: (is less than) 2014-06-01 Reset to default assignee and clear in-progress tags. Mail being skipped