When I insert USB device on DELL Inspiron mini 9, machine hangs up and reboot. I can see this with USB reader/writer of microSD and modem card. dmesg is here (after reboot with USB memory): ---- Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #22: Sun May 31 23:11:59 JST 2009 togawa@nayuki.vegalta.org:/usr/obj/usr/src/sys/NAYUKI Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (1596.02-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x106c2 Stepping = 2 Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x40c39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,xTPR,PDCM,<b22>> AMD Features=0x100000<NX> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 2147483648 (2048 MB) avail memory = 2076233728 (1980 MB) ACPI APIC Table: <INTEL CALISTGA> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP/HT): APIC ID: 1 This module (opensolaris) contains code covered by the Common Development and Distribution License (CDDL) see http://opensolaris.org/os/licensing/opensolaris_license/ ioapic0: Changing APIC ID to 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <PTLTD XSDT> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x19> port 0x62,0x66 on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf0000000-0xf007ffff,0xd0000000-0xdfffffff,0xf0300000-0xf033ffff irq 16 at device 2.0 on pci0 agp0: <Intel 945GME SVGA controller> on vgapci0 agp0: detected 7932k stolen memory agp0: aperture size is 256M vgapci1: <VGA-compatible display> mem 0xf0080000-0xf00fffff at device 2.1 on pci0 hdac0: <Intel 82801G High Definition Audio Controller> mem 0xf0540000-0xf0543fff irq 22 at device 27.0 on pci0 hdac0: HDA Driver Revision: 20090401_0132 hdac0: [ITHREAD] pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib1 pci2: <base peripheral> at device 0.0 (no driver attached) sdhci0: <JMicron JMB38X SD> mem 0xf0100400-0xf01004ff irq 16 at device 0.2 on pci2 sdhci0: 1 slot(s) allocated sdhci0: [ITHREAD] mmc0: <MMC/SD bus> on sdhci0 pci2: <base peripheral> at device 0.3 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 pci3: <ACPI PCI bus> on pcib2 iwn0: <Intel(R) PRO/Wireless 4965BGN> mem 0xf0200000-0xf0201fff irq 17 at device 0.0 on pci3 iwn0: Reg Domain: JPN, address 00:1f:3b:66:15:dd iwn0: [ITHREAD] iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps iwn0: 11na MCS: 15Mbps 30Mbps 45Mbps 60Mbps 90Mbps 120Mbps 135Mbps 150Mbps 30Mbps 60Mbps 90Mbps 120Mbps 180Mbps 240Mbps 270Mbps 300Mbps iwn0: 11ng MCS: 15Mbps 30Mbps 45Mbps 60Mbps 90Mbps 120Mbps 135Mbps 150Mbps 30Mbps 60Mbps 90Mbps 120Mbps 180Mbps 240Mbps 270Mbps 300Mbps pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci4: <ACPI PCI bus> on pcib3 re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0x2000-0x20ff mem 0xf0610000-0xf0610fff,0xf0600000-0xf060ffff irq 18 at device 0.0 on pci4 re0: Using 1 MSI messages re0: Chip rev. 0x24800000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto re0: Ethernet address: 00:21:70:d5:9e:9d re0: [FILTER] uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 23 at device 29.0 on pci0 uhci0: [ITHREAD] uhci0: LegSup = 0x003b usbus0: <UHCI (generic) USB controller> on uhci0 uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 19 at device 29.1 on pci0 uhci1: [ITHREAD] uhci1: LegSup = 0x0010 usbus1: <UHCI (generic) USB controller> on uhci1 uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at device 29.2 on pci0 uhci2: [ITHREAD] uhci2: LegSup = 0x0010 usbus2: <UHCI (generic) USB controller> on uhci2 uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 16 at device 29.3 on pci0 uhci3: [ITHREAD] uhci3: LegSup = 0x0010 usbus3: <UHCI (generic) USB controller> on uhci3 ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xf0544000-0xf05443ff irq 23 at device 29.7 on pci0 ehci0: [ITHREAD] usbus4: EHCI version 1.0 usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib4 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 acpi_acad0: <AC Adapter> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. battery0: <ACPI Control Method Battery> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0 cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xe0000-0xe17ff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: parallel port not found. WARNING: ZFS is considered to be an experimental feature in FreeBSD. Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 ZFS filesystem version 13 ZFS storage pool version 13 ad0: FAILURE - SETFEATURES ENABLE RCACHE status=51<READY,DSC,ERROR> error=1<ILLugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 EGAL_LENGTH> ad0: 29389MB <STEC PATA 32GB D5221-10> at ata0-master UDMA100 hdac0: HDA Codec #0: Realtek ALC268 pcm0: <HDA Realtek ALC268 PCM #0 Analog> at cad 0 nid 1 on hdac0 pcm1: <HDA Realtek ALC268 PCM #1 Analog> at cad 0 nid 1 on hdac0 GEOM_LABEL: Label for provider ad0s1a is ufsid/496440b894f6de1c. mmcsd0: 3781MB <SDHC Memory Card> at mmc0 25MHz/4bit SMP: AP CPU #1 Launched! GEOM: mmcsd0: partition 1 does not start on a track boundary. GEOM: mmcsd0: partition 1 does not end on a track boundary. GEOM_LABEL: Label for provider mmcsd0s1 is msdosfs/\M^C{\M^C\M^J\M^C\M^E\M^A[\M^C\M^@. Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0 uhub1: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered Root mount waiting for: usbus4 Root mount waiting for: usbus4 Root mount waiting for: usbus4 uhub4: 8 ports with 8 removable, self powered Root mount waiting for: usbus4 ugen4.2: <Genesys> at usbus4 umass0: <Genesys USB Reader, class 0/0, rev 2.00/94.04, addr 2> on usbus4 umass0: SCSI over Bulk-Only; quirks = 0x0000 Root mount waiting for: usbus4 ugen3.2: <Broadcom Corp> at usbus3 ubt0: <Broadcom Corp BCM92045NMD, class 224/1, rev 2.00/1.00, addr 2> on usbus3 umass0:0:0:-1: Attached to scbus0 Trying to mount root from zfs:tank/root (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 (probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data) da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Generic STORAGE DEVICE 9404> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: 1947MB (3987456 512 byte sectors: 255H 63S/T 248C) GEOM: da0: partition 1 does not start on a track boundary. GEOM: da0: partition 1 does not end on a track boundary. GEOM_LABEL: Label for provider da0s1 is msdosfs/WX340K. GEOM_LABEL: Label ufsid/496440b894f6de1c removed. GEOM_LABEL: Label for provider ad0s1a is ufsid/496440b894f6de1c. GEOM_LABEL: Label ufsid/496440b894f6de1c removed. wlan0: Ethernet address: 00:1f:3b:66:15:dd WARNING: attempt to net_add_domain(bluetooth) after domainfinalize() WARNING: attempt to net_add_domain(netgraph) after domainfinalize() GEOM_LABEL: Label for provider md0 is ufsid/4a265751b1244b1f. GEOM_LABEL: Label ufsid/4a265751b1244b1f removed. link_elf: symbol kern_socketpair undefined fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8 link_elf: symbol kern_socketpair undefined KLD linprocfs.ko: depends on linux - not available drm0: <Intel i945GME> on vgapci0 vgapci0: child drm0 requested pci_enable_busmaster info: [drm] AGP at 0xd0000000 256MB info: [drm] Initialized i915 1.6.0 20080730 drm0: [ITHREAD] How-To-Repeat: Inserting USB device.
On Wednesday 03 June 2009, Satoshi Togawa wrote: > >Number: 135206 > >Category: usb > >Synopsis: machine reboots when inserted USB device > >Confidential: no > >Severity: non-critical > >Priority: low > >Responsible: freebsd-usb > >State: open > >Quarter: > >Keywords: > >Date-Required: > >Class: sw-bug > >Submitter-Id: current-users > >Arrival-Date: Wed Jun 03 11:10:00 UTC 2009 > >Closed-Date: > >Last-Modified: > >Originator: Satoshi Togawa > >Release: 8-current > >Organization: > >Environment: > > FreeBSD nayuki.vegalta.org 8.0-CURRENT FreeBSD 8.0-CURRENT #22: Sun May 31 > 23:11:59 JST 2009 togawa@nayuki.vegalta.org:/usr/obj/usr/src/sys/NAYUKI > i386 > > >Description: > > When I insert USB device on DELL Inspiron mini 9, machine hangs up and > reboot. I can see this with USB reader/writer of microSD and modem card. > Do you have any old modules in /boot/modules ? --HPS
On Wed, 3 Jun 2009 13:27:52 +0200 Hans Petter Selasky <hselasky@c2i.net> wrote: > On Wednesday 03 June 2009, Satoshi Togawa wrote: > > >Number: 135206 > > >Category: usb > > >Synopsis: machine reboots when inserted USB device > > >Confidential: no > > >Severity: non-critical > > >Priority: low > > >Responsible: freebsd-usb > > >State: open > > >Quarter: > > >Keywords: > > >Date-Required: > > >Class: sw-bug > > >Submitter-Id: current-users > > >Arrival-Date: Wed Jun 03 11:10:00 UTC 2009 > > >Closed-Date: > > >Last-Modified: > > >Originator: Satoshi Togawa > > >Release: 8-current > > >Organization: > > >Environment: > > > > FreeBSD nayuki.vegalta.org 8.0-CURRENT FreeBSD 8.0-CURRENT #22: Sun May 31 > > 23:11:59 JST 2009 togawa@nayuki.vegalta.org:/usr/obj/usr/src/sys/NAYUKI > > i386 > > > > >Description: > > > > When I insert USB device on DELL Inspiron mini 9, machine hangs up and > > reboot. I can see this with USB reader/writer of microSD and modem card. > > > > Do you have any old modules in /boot/modules ? > > --HPS > > My /boot/modules is empty and there isn't directory /boot/kernel.old . -- toga@puyo.org
On 12/23/-58 20:59, TOGAWA Satoshi wrote: > On Wed, 3 Jun 2009 13:27:52 +0200 > Hans Petter Selasky <hselasky@c2i.net> wrote: > >> On Wednesday 03 June 2009, Satoshi Togawa wrote: >>>> Number: 135206 >>>> Category: usb >>>> Synopsis: machine reboots when inserted USB device >>>> Confidential: no >>>> Severity: non-critical >>>> Priority: low >>>> Responsible: freebsd-usb >>>> State: open >>>> Quarter: >>>> Keywords: >>>> Date-Required: >>>> Class: sw-bug >>>> Submitter-Id: current-users >>>> Arrival-Date: Wed Jun 03 11:10:00 UTC 2009 >>>> Closed-Date: >>>> Last-Modified: >>>> Originator: Satoshi Togawa >>>> Release: 8-current >>>> Organization: >>>> Environment: >>> FreeBSD nayuki.vegalta.org 8.0-CURRENT FreeBSD 8.0-CURRENT #22: Sun May 31 >>> 23:11:59 JST 2009 togawa@nayuki.vegalta.org:/usr/obj/usr/src/sys/NAYUKI >>> i386 >>> >>>> Description: >>> When I insert USB device on DELL Inspiron mini 9, machine hangs up and >>> reboot. I can see this with USB reader/writer of microSD and modem card. >>> >> Do you have any old modules in /boot/modules ? >> >> --HPS >> >> > > My /boot/modules is empty and there isn't directory /boot/kernel.old . > Togawa, at first, it may eventually make sense to see a kernel panic backtrace - without that, it's guesswork (tm). Can you show us your kernel config? But please try to sync your binaries (kernel + kld's + world) first. Not related to your problem, you should fix your thumb drive / sdhc module slices and fix filesystem labels. Volker
For whats it's worth my Vostro 420MT is useless on FreeBSD, I can only use it 45 mins at a time until it freezes, I have determined that it is due to ACPI trickery. Could be why your PC reboots when inserting a USB device.
For bugs matching the following criteria: Status: In Progress Changed: (is less than) 2014-06-01 Reset to default assignee and clear in-progress tags. Mail being skipped