Bug 142719 - [urtw] [usb8] AirLive WL-1600USB (RTL8187L chipset) fails to work
Summary: [urtw] [usb8] AirLive WL-1600USB (RTL8187L chipset) fails to work
Status: Closed FIXED
Alias: None
Product: Base System
Classification: Unclassified
Component: usb (show other bugs)
Version: 8.0-STABLE
Hardware: Any Any
: Normal Affects Only Me
Assignee: freebsd-usb (Nobody)
URL:
Keywords:
Depends on:
Blocks:
 
Reported: 2010-01-11 17:10 UTC by Pawel Pekala
Modified: 2015-12-25 05:12 UTC (History)
1 user (show)

See Also:

Attachments
Add an attachment (proposed patch, testcase, etc.)

Note You need to log in before you can comment on or make changes to this bug.
Description Pawel Pekala 2010-01-11 17:10:01 UTC 

Device seems to be recognized as urtw0, but scanning for networks
or setting IP address fails:

[corn:~]# ifconfig urtw0 scan up
ifconfig: unable to get scan results
[corn:~]# ifconfig urtw0 inet 10.1.0.33 netmask 255.255.255.0
ifconfig: ioctl (SIOCAIFADDR): Invalid argument

Here`s my dmesg:

Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-STABLE #0: Mon Jan 11 17:00:23 CET 2010
    corn@caprica.slowicza.org:/usr/obj/usr/src/sys/CORN i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU     T6600  @ 2.20GHz (2194.51-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x1067a  Stepping = 10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x408e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 2147483648 (2048 MB)
avail memory = 2055544832 (1960 MB)
ACPI APIC Table: <090909 APIC1656>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <090909 XSDT1656> on motherboard
acpi0: [ITHREAD]
acpi_ec0: <Embedded Controller: GPE 0x1b, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
unknown: I/O range not supported
unknown: I/O range not supported
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7dd00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xdc00-0xdc07 mem 0xfe400000-0xfe7fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM45 SVGA controller> on vgapci0
agp0: detected 32764k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xfe800000-0xfe8fffff at device 2.1 on pci0
uhci0: <Intel 82801I (ICH9) USB controller> port 0xd880-0xd89f irq 16 at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0xd800-0xd81f irq 21 at device 26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0xd480-0xd49f irq 19 at device 26.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfe9fbc00-0xfe9fbfff irq 18 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
hdac0: <Intel 82801I High Definition Audio Controller> mem 0xfe9f4000-0xfe9f7fff irq 22 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20091113_0138
hdac0: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci3: <ACPI PCI bus> on pcib3
ale0: <Atheros AR8121/AR8113/AR8114 PCIe Ethernet> port 0xec00-0xec7f mem 0xfebc0000-0xfebfffff irq 17 at device 0.0 on pci3
ale0: 960 Tx FIFO, 1024 Rx FIFO
ale0: Using 1 MSI messages.
miibus0: <MII bus> on ale0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
atphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ale0: Ethernet address: 90:e6:ba:98:7d:77
ale0: [FILTER]
uhci3: <Intel 82801I (ICH9) USB controller> port 0xd400-0xd41f irq 23 at device 29.0 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0xd080-0xd09f irq 19 at device 29.1 on pci0
uhci4: [ITHREAD]
uhci4: LegSup = 0x2f00
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0xd000-0xd01f irq 18 at device 29.2 on pci0
uhci5: [ITHREAD]
uhci5: LegSup = 0x2f00
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfe9fb800-0xfe9fbbff irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel AHCI controller> port 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc41f mem 0xfe9fb000-0xfe9fb7ff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI v1.20 controller with 4 3Gbps ports, PM not supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
cpu0: <ACPI CPU> on acpi0
ACPI Warning: Incorrect checksum in table [ATKG] - B5, should be E5 20090521 tbutils-275
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
ppc0: parallel port not found.
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ad4: 476940MB <Seagate ST9500325AS 0002SDM1> at ata2-master UDMA100 SATA 3Gb/s
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
acd0: DVDR <MATSHITADVD-RAM UJ862AS/1.12> at ata3-master UDMA66 SATA 1.5Gb/s
hdac0: HDA Codec #0: VIA VT1708S_0
pcm0: <HDA VIA VT1708S_0 PCM #0 Analog> at cad 0 nid 1 on hdac0
SMP: AP CPU #1 Launched!
Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
Root mount waiting for: usbus7 usbus3
ugen7.2: <vendor 0x1b75> at usbus7
urtw0: <vendor 0x1b75 product 0x8187, class 0/0, rev 2.00/1.00, addr 2> on usbus7
urtw0: unknown RTL8187L type: 0x8000000
ugen3.2: <Chicony Electronics Co., Ltd.> at usbus3
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Root mount waiting for: usbus7
urtw0: rtl8187l rf rtl8225u hwrev none
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Root mount waiting for: usbus7
Trying to mount root from ufs:/dev/ad4s1a
ale0: link state changed to UP
drm0: <Mobile Intel\M-B\M-. GM45 Express Chipset> on vgapci0
info: [drm] MSI enabled 1 message(s)
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
drm0: [ITHREAD]
ugen7.2: <vendor 0x1b75> at usbus7 (disconnected)
urtw0: at uhub7, port 4, addr 2 (disconnected)
urtw0: failed to stop (USB_ERR_NOT_CONFIGURED)
ugen7.2: <vendor 0x1b75> at usbus7
urtw0: <vendor 0x1b75 product 0x8187, class 0/0, rev 2.00/1.00, addr 2> on usbus7
urtw0: unknown RTL8187L type: 0x8000000
urtw0: rtl8187l rf rtl8225u hwrev none
ugen7.2: <vendor 0x1b75> at usbus7 (disconnected)
urtw0: at uhub7, port 3, addr 2 (disconnected)
urtw0: failed to stop (USB_ERR_NOT_CONFIGURED)
ugen7.2: <vendor 0x1b75> at usbus7
urtw0: <vendor 0x1b75 product 0x8187, class 0/0, rev 2.00/1.00, addr 2> on usbus7
urtw0: unknown RTL8187L type: 0x8000000
urtw0: rtl8187l rf rtl8225u hwrev none
Comment 1 Pawel Pekala 2010-01-14 21:30:08 UTC 
Update:

I have managed to configure device through wlan(4) but card still
fails to connect to my network. I have no problems to connect with my
other Atheros based card.
Comment 2 Hans Petter Selasky 2010-07-25 13:11:45 UTC 
Hi,

In FreeBSD 8+ you need to use:

ifconfig wlan0 create wlandev urtw0

First. Then use wlan0 subsequently.

--HPS
Comment 3 Pawel Pekala 2012-03-29 22:49:13 UTC 
I got this hardware to work with other AP on 8-STABLE and 10-CURRENT.
Good candidate for close.

--=20
pozdrawiam / with regards
Pawe=B3 P=EAkala
Comment 4 Martin Wilke freebsd_committer freebsd_triage 2015-12-25 05:12:10 UTC 
Close per request.