On Sun, Jan 31, 2010 at 9:22 PM, Michael <msherman77@gmail.com> wrote:
>
>>Number: =A0 =A0 =A0 =A0 143420
>>Category: =A0 =A0 =A0 misc
>>Synopsis: =A0 =A0 =A0 ACPI issues with Toshiba
>>Confidential: =A0 no
>>Severity: =A0 =A0 =A0 serious
>>Priority: =A0 =A0 =A0 medium
>>Responsible: =A0 =A0freebsd-bugs
>>State: =A0 =A0 =A0 =A0 =A0open
>>Quarter:
>>Keywords:
>>Date-Required:
>>Class: =A0 =A0 =A0 =A0 =A0sw-bug
>>Submitter-Id: =A0 current-users
>>Arrival-Date: =A0 Mon Feb 01 05:30:07 UTC 2010
>>Closed-Date:
>>Last-Modified:
>>Originator: =A0 =A0 Michael
>>Release: =A0 =A0 =A0 =A08.0 (PCBSD 8.0 Beta)
>>Organization:
>>Environment:
> FreeBSD pcbsd-2645 8.0-RELEASE-p1 FreeBSD 8.0-RELEASE-p1 #3: Fri Dec 11 1=
3:33:42 PST 2009 =A0 =A0 root@build8x32.pcbsd.org:/usr/obj/usr/pcbsd-build8=
0/fbsd-source/8.0-src/sys/PCBSD =A0i386
>>Description:
> I just installed PCBSD 8.0 Beta (which is FreeBSD 8.0 release-p1) on
> my Toshiba Satellite.
> Specs: CPU: 1.9 Ghz Athlon X 2. Video: ATI chipset (radeonhd driver)
> Audio: Intel (sound_hda) Wireless: (Atheros driver)
> ACPI doesn't fully work. No suspend / resume, but I can live without it.
>
> What does bother me is that the laptop runs very hot 60+ C. Other
> systems run at ~45 - 50C
> Enabling powerd makes system very slow (almost unusable) and produces
> the message: set freq failed, error 6
>
> dmesg.boot
>
> Copyright (c) 1992-2009 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> =A0 =A0 =A0 =A0The Regents of the University of California. All rights re=
served.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 8.0-RELEASE-p1 #3: Fri Dec 11 13:33:42 PST 2009
> =A0 =A0root at build8x32.pcbsd.org:/usr/obj/usr/pcbsd-build80/fbsd-source=
/8.0-src/sys/PCBSD
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD Athlon(tm) X2 Dual-Core QL-60 (1895.28-MHz 686-class CPU)
> =A0Origin =3D "AuthenticAMD" =A0Id =3D 0x200f31 =A0Stepping =3D 1
> =A0Features=3D0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR=
,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
> =A0Features2=3D0x2001<SSE3,CX16>
> =A0AMD Features=3D0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNo=
w!>
> =A0AMD Features2=3D0x131f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch,OSVW,SKINIT>
> =A0TSC: P-state invariant
> real memory =A0=3D 2147483648 (2048 MB)
> avail memory =3D 1821257728 (1736 MB)
> ACPI APIC Table: <TOSINV TOSINV00>
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> FreeBSD/SMP: 1 package(s) x 2 core(s)
> =A0cpu0 (BSP): APIC ID: =A00
> =A0cpu1 (AP): APIC ID: =A01
> ioapic0: Changing APIC ID to 4
> ioapic0 <Version 2.1> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> module_register_init: MOD_LOAD (splash_pcx, 0xc0fbe830, 0) error 2
> cryptosoft0: <software crypto> on motherboard
> acpi0: <TOSINV TOSINV00> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> acpi_ec0: <Embedded Controller: GPE 0x7> port 0x62,0x66 on acpi0
> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on a=
cpi0
> Timecounter "HPET" frequency 14318180 Hz quality 900
> acpi_button0: <Power Button> on acpi0
> acpi_lid0: <Control Method Lid Switch> on acpi0
> battery0: <ACPI Control Method Battery> on acpi0
> acpi_acad0: <AC Adapter> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> vgapci0: <VGA-compatible display> port 0x6000-0x60ff mem
> 0x80000000-0x8fffffff,0x96300000-0x9630ffff,0x96200000-0x962fffff irq
> 18 at device 5.0 on pci1
> pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
> pci4: <ACPI PCI bus> on pcib3
> re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0x3000-0x30ff
> mem 0x91010000-0x91010fff,0x91000000-0x9100ffff irq 17 at device 0.0
> on pci4
> re0: Using 1 MSI messages
> re0: Chip rev. 0x34800000
> re0: MAC rev. 0x00000000
> miibus0: <MII bus> on re0
> rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
> rlphy0: =A010baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> re0: Ethernet address: 00:1e:33:46:bb:a0
> re0: [FILTER]
> pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0
> pci5: <ACPI PCI bus> on pcib4
> ath0: <Atheros 5424/2424> mem 0x93100000-0x9310ffff irq 18 at device 0.0 =
on pci5
> ath0: [ITHREAD]
> ath0: AR2425 mac 14.2 RF5424 phy 7.0
> pcib5: <ACPI PCI-PCI bridge> at device 7.0 on pci0
> pci6: <ACPI PCI bus> on pcib5
> atapci0: <ATI IXP700/800 SATA300 controller> port
> 0x7038-0x703f,0x704c-0x704f,0x7030-0x7037,0x7048-0x704b,0x7010-0x701f
> mem 0x96408000-0x964083ff irq 22 at device 17.0 on pci0
> atapci0: [ITHREAD]
> atapci0: AHCI v1.10 controller with 6 3Gbps ports, PM supported
> ata2: <ATA channel 0> on atapci0
> ata2: port is not ready (timeout 0ms) tfd =3D 000001d0
> ata2: software reset clear timeout
> ata2: [ITHREAD]
> ata3: <ATA channel 1> on atapci0
> ata3: [ITHREAD]
> ata4: <ATA channel 2> on atapci0
> ata4: port is not ready (timeout 0ms) tfd =3D 00000180
> ata4: software reset clear timeout
> ata4: [ITHREAD]
> ata5: <ATA channel 3> on atapci0
> ata5: [ITHREAD]
> ata6: <ATA channel 4> on atapci0
> ata6: [ITHREAD]
> ata7: <ATA channel 5> on atapci0
> ata7: [ITHREAD]
> ohci0: <OHCI (generic) USB controller> mem 0x96407000-0x96407fff irq
> 16 at device 18.0 on pci0
> ohci0: [ITHREAD]
> usbus0: <OHCI (generic) USB controller> on ohci0
> ohci1: <OHCI (generic) USB controller> mem 0x96406000-0x96406fff irq
> 16 at device 18.1 on pci0
> ohci1: [ITHREAD]
> usbus1: <OHCI (generic) USB controller> on ohci1
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0x96408500-0x964085ff
> irq 17 at device 18.2 on pci0
> ehci0: [ITHREAD]
> usbus2: waiting for BIOS to give up control
> usbus2: EHCI version 1.0
> usbus2: <EHCI (generic) USB 2.0 controller> on ehci0
> ohci2: <OHCI (generic) USB controller> mem 0x96405000-0x96405fff irq
> 18 at device 19.0 on pci0
> ohci2: [ITHREAD]
> usbus3: <OHCI (generic) USB controller> on ohci2
> ohci3: <OHCI (generic) USB controller> mem 0x96404000-0x96404fff irq
> 18 at device 19.1 on pci0
> ohci3: [ITHREAD]
> usbus4: <OHCI (generic) USB controller> on ohci3
> ehci1: <EHCI (generic) USB 2.0 controller> mem 0x96408400-0x964084ff
> irq 19 at device 19.2 on pci0
> ehci1: [ITHREAD]
> usbus5: waiting for BIOS to give up control
> usbus5: EHCI version 1.0
> usbus5: <EHCI (generic) USB 2.0 controller> on ehci1
> pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
> atapci1: <ATI IXP700/800 UDMA133 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x7000-0x700f irq 16 at device
> 20.1 on pci0
> ata0: <ATA channel 0> on atapci1
> ata0: [ITHREAD]
> ata1: <ATA channel 1> on atapci1
> ata1: [ITHREAD]
> pci0: <multimedia, HDA> at device 20.2 (no driver attached)
> isab0: <PCI-ISA bridge> at device 20.3 on pci0
> isa0: <ISA bus> on isab0
> pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0
> pci128: <ACPI PCI bus> on pcib6
> acpi_tz0: <Thermal Zone> on acpi0
> atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: [ITHREAD]
> psm0: model Generic PS/2 mouse, device ID 0
> cpu0: <ACPI CPU> on acpi0
> acpi_throttle0: <ACPI CPU Throttling> on cpu0
> hwpstate0: <Cool`n'Quiet 2.0> on cpu0
> cpu1: <ACPI CPU> on acpi0
> pmtimer0 on isa0
> orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff pnpid ORM0000 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=3D0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> ppc0: parallel port not found.
> ZFS NOTICE: Prefetch is disabled by default on i386 -- to enable,
> =A0 =A0 =A0 =A0 =A0 =A0add "vfs.zfs.prefetch_disable=3D0" to /boot/loader=
.conf.
> ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable beha=
vior.
> =A0 =A0 =A0 =A0 =A0 =A0 Consider tuning vm.kmem_size and vm.kmem_size_max
> =A0 =A0 =A0 =A0 =A0 =A0 in /boot/loader.conf.
> ZFS filesystem version 13
> ZFS storage pool version 13
> Timecounters tick every 1.000 msec
> usbus0: 12Mbps Full Speed USB v1.0
> usbus1: 12Mbps Full Speed USB v1.0
> usbus2: 480Mbps High Speed USB v2.0
> usbus3: 12Mbps Full Speed USB v1.0
> usbus4: 12Mbps Full Speed USB v1.0
> usbus5: 480Mbps High Speed USB v2.0
> ad4: 152627MB <Hitachi HTS542516K9SA00 BBCOC33P> at ata2-master SATA150
> ugen0.1: <ATI> at usbus0
> uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> ugen1.1: <ATI> at usbus1
> uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> ugen2.1: <ATI> at usbus2
> uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
> ugen3.1: <ATI> at usbus3
> uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
> ugen4.1: <ATI> at usbus4
> uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
> ugen5.1: <ATI> at usbus5
> uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
> uhub0: 3 ports with 3 removable, self powered
> uhub1: 3 ports with 3 removable, self powered
> uhub3: 3 ports with 3 removable, self powered
> uhub4: 3 ports with 3 removable, self powered
> acd0: DVDR <PIONEER DVD-RW DVRTD08A/1.50> at ata4-master SATA150
> uhub2: 6 ports with 6 removable, self powered
> uhub5: 6 ports with 6 removable, self powered
> ugen5.2: <Chicony Electronics Co., Ltd.> at usbus5
> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00 sks=3D0x48=
 0x00 0x01
> (probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
> (probe0:ata1:0:0:0): CAM Status: SCSI Status Error
> (probe0:ata1:0:0:0): SCSI Status: Check Condition
> (probe0:ata1:0:0:0): NOT READY asc:3a,1
> (probe0:ata1:0:0:0): Medium not present - tray closed
> (probe0:ata1:0:0:0): Unretryable error
> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00 sks=3D0x48=
 0x00 0x01
> SMP: AP CPU #1 Launched!
> cd0 at ata1 bus 0 target 0 lun 0
> cd0: <PIONEER DVD-RW =A0DVRTD08A 1.50> Removable CD-ROM SCSI-0 device
> cd0: 3.300MB/s transfers
> cd0: Attempt to query device size failed: NOT READY, Medium not
> present - tray closed
> ugen5.3: <Generic> at usbus5
> umass0: <Bulk-In, Bulk-Out, Interface> on usbus5
> umass0: =A0SCSI over Bulk-Only; quirks =3D 0x0000
> Root mount waiting for: usbus5
> umass0:2:0:-1: Attached to scbus2
> Trying to mount root from ufs:/dev/label/rootfs0
> (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
> (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
> (probe0:umass-sim0:0:0:0): Medium not present
> (probe0:umass-sim0:0:0:0): Unretryable error
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <Generic- Multi-Card 1.00> Removable Direct Access SCSI-0 device
> da0: 40.000MB/s transfers
> da0: Attempt to query device size failed: NOT READY, Medium not present
> wlan0: Ethernet address: 00:21:63:10:a4:d9
> ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based
> forwarding disabled, default to deny, logging disabled

Error 6 corresponds to --

#define ENXIO           6               /* Device not configured */

-- is there a step that wasn't performed before powerd was called?

Thanks,
-Garrett

Comment 2 Mark Linimon 2010-02-01 07:16:50 UTC

Responsible Changed
From-To: freebsd-bugs->freebsd-acpi

Over to maintainer(s).

On Feb 1, 2010 12:35am, Garrett Cooper <yanefbsd@gmail.com> wrote:
> On Sun, Jan 31, 2010 at 9:22 PM, Michael msherman77@gmail.com> wrote:

> >

> >>Number: 143420

> >>Category: misc

> >>Synopsis: ACPI issues with Toshiba

> >>Confidential: no

> >>Severity: serious

> >>Priority: medium

> >>Responsible: freebsd-bugs

> >>State: open

> >>Quarter:

> >>Keywords:

> >>Date-Required:

> >>Class: sw-bug

> >>Submitter-Id: current-users

> >>Arrival-Date: Mon Feb 01 05:30:07 UTC 2010

> >>Closed-Date:

> >>Last-Modified:

> >>Originator: Michael

> >>Release: 8.0 (PCBSD 8.0 Beta)

> >>Organization:

> >>Environment:

> > FreeBSD pcbsd-2645 8.0-RELEASE-p1 FreeBSD 8.0-RELEASE-p1 #3: Fri Dec 11  
> 13:33:42 PST 2009  
> root@build8x32.pcbsd.org:/usr/obj/usr/pcbsd-build80/fbsd-source/8.0-src/sys/PCBSD  
> i386

> >>Description:

> > I just installed PCBSD 8.0 Beta (which is FreeBSD 8.0 release-p1) on

> > my Toshiba Satellite.

> > Specs: CPU: 1.9 Ghz Athlon X 2. Video: ATI chipset (radeonhd driver)

> > Audio: Intel (sound_hda) Wireless: (Atheros driver)

> > ACPI doesn't fully work. No suspend / resume, but I can live without it.

> >

> > What does bother me is that the laptop runs very hot 60+ C. Other

> > systems run at ~45 - 50C

> > Enabling powerd makes system very slow (almost unusable) and produces

> > the message: set freq failed, error 6

> >

> > dmesg.boot

> >

> > Copyright (c) 1992-2009 The FreeBSD Project.

> > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994

> > The Regents of the University of California. All rights reserved.

> > FreeBSD is a registered trademark of The FreeBSD Foundation.

> > FreeBSD 8.0-RELEASE-p1 #3: Fri Dec 11 13:33:42 PST 2009

> > root at  
> build8x32.pcbsd.org:/usr/obj/usr/pcbsd-build80/fbsd-source/8.0-src/sys/PCBSD

> > Timecounter "i8254" frequency 1193182 Hz quality 0

> > CPU: AMD Athlon(tm) X2 Dual-Core QL-60 (1895.28-MHz 686-class CPU)

> > Origin = "AuthenticAMD" Id = 0x200f31 Stepping = 1

> > Features=0x178bfbff

> > Features2=0x2001

> > AMD Features=0xea500800

> > AMD Features2=0x131f

> > TSC: P-state invariant

> > real memory = 2147483648 (2048 MB)

> > avail memory = 1821257728 (1736 MB)

> > ACPI APIC Table:

> > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs

> > FreeBSD/SMP: 1 package(s) x 2 core(s)

> > cpu0 (BSP): APIC ID: 0

> > cpu1 (AP): APIC ID: 1

> > ioapic0: Changing APIC ID to 4

> > ioapic0 irqs 0-23 on motherboard

> > kbd1 at kbdmux0

> > module_register_init: MOD_LOAD (splash_pcx, 0xc0fbe830, 0) error 2

> > cryptosoft0: on motherboard

> > acpi0: on motherboard

> > acpi0: [ITHREAD]

> > acpi0: Power Button (fixed)

> > Timecounter "ACPI-safe" frequency 3579545 Hz quality 850

> > acpi_timer0: port 0x408-0x40b on acpi0

> > acpi_ec0: port 0x62,0x66 on acpi0

> > acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0

> > Timecounter "HPET" frequency 14318180 Hz quality 900

> > acpi_button0: on acpi0

> > acpi_lid0: on acpi0

> > battery0: on acpi0

> > acpi_acad0: on acpi0

> > pcib0: port 0xcf8-0xcff on acpi0

> > pci0: on pcib0

> > pcib1: at device 1.0 on pci0

> > pci1: on pcib1

> > vgapci0: port 0x6000-0x60ff mem

> > 0x80000000-0x8fffffff,0x96300000-0x9630ffff,0x96200000-0x962fffff irq

> > 18 at device 5.0 on pci1

> > pcib2: at device 4.0 on pci0

> > pci2: on pcib2

> > pcib3: at device 5.0 on pci0

> > pci4: on pcib3

> > re0: port 0x3000-0x30ff

> > mem 0x91010000-0x91010fff,0x91000000-0x9100ffff irq 17 at device 0.0

> > on pci4

> > re0: Using 1 MSI messages

> > re0: Chip rev. 0x34800000

> > re0: MAC rev. 0x00000000

> > miibus0: on re0

> > rlphy0: PHY 1 on miibus0

> > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

> > re0: Ethernet address: 00:1e:33:46:bb:a0

> > re0: [FILTER]

> > pcib4: at device 6.0 on pci0

> > pci5: on pcib4

> > ath0: mem 0x93100000-0x9310ffff irq 18 at device 0.0 on pci5

> > ath0: [ITHREAD]

> > ath0: AR2425 mac 14.2 RF5424 phy 7.0

> > pcib5: at device 7.0 on pci0

> > pci6: on pcib5

> > atapci0: port

> > 0x7038-0x703f,0x704c-0x704f,0x7030-0x7037,0x7048-0x704b,0x7010-0x701f

> > mem 0x96408000-0x964083ff irq 22 at device 17.0 on pci0

> > atapci0: [ITHREAD]

> > atapci0: AHCI v1.10 controller with 6 3Gbps ports, PM supported

> > ata2: on atapci0

> > ata2: port is not ready (timeout 0ms) tfd = 000001d0

> > ata2: software reset clear timeout

> > ata2: [ITHREAD]

> > ata3: on atapci0

> > ata3: [ITHREAD]

> > ata4: on atapci0

> > ata4: port is not ready (timeout 0ms) tfd = 00000180

> > ata4: software reset clear timeout

> > ata4: [ITHREAD]

> > ata5: on atapci0

> > ata5: [ITHREAD]

> > ata6: on atapci0

> > ata6: [ITHREAD]

> > ata7: on atapci0

> > ata7: [ITHREAD]

> > ohci0: mem 0x96407000-0x96407fff irq

> > 16 at device 18.0 on pci0

> > ohci0: [ITHREAD]

> > usbus0: on ohci0

> > ohci1: mem 0x96406000-0x96406fff irq

> > 16 at device 18.1 on pci0

> > ohci1: [ITHREAD]

> > usbus1: on ohci1

> > ehci0: mem 0x96408500-0x964085ff

> > irq 17 at device 18.2 on pci0

> > ehci0: [ITHREAD]

> > usbus2: waiting for BIOS to give up control

> > usbus2: EHCI version 1.0

> > usbus2: on ehci0

> > ohci2: mem 0x96405000-0x96405fff irq

> > 18 at device 19.0 on pci0

> > ohci2: [ITHREAD]

> > usbus3: on ohci2

> > ohci3: mem 0x96404000-0x96404fff irq

> > 18 at device 19.1 on pci0

> > ohci3: [ITHREAD]

> > usbus4: on ohci3

> > ehci1: mem 0x96408400-0x964084ff

> > irq 19 at device 19.2 on pci0

> > ehci1: [ITHREAD]

> > usbus5: waiting for BIOS to give up control

> > usbus5: EHCI version 1.0

> > usbus5: on ehci1

> > pci0: at device 20.0 (no driver attached)

> > atapci1: port

> > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x7000-0x700f irq 16 at device

> > 20.1 on pci0

> > ata0: on atapci1

> > ata0: [ITHREAD]

> > ata1: on atapci1

> > ata1: [ITHREAD]

> > pci0: at device 20.2 (no driver attached)

> > isab0: at device 20.3 on pci0

> > isa0: on isab0

> > pcib6: at device 20.4 on pci0

> > pci128: on pcib6

> > acpi_tz0: on acpi0

> > atrtc0: port 0x70-0x71 on acpi0

> > atkbdc0: port 0x60,0x64 irq 1 on acpi0

> > atkbd0: irq 1 on atkbdc0

> > kbd0 at atkbd0

> > atkbd0: [GIANT-LOCKED]

> > atkbd0: [ITHREAD]

> > psm0: flags 0x1000 irq 12 on atkbdc0

> > psm0: [GIANT-LOCKED]

> > psm0: [ITHREAD]

> > psm0: model Generic PS/2 mouse, device ID 0

> > cpu0: on acpi0

> > acpi_throttle0: on cpu0

> > hwpstate0: on cpu0

> > cpu1: on acpi0

> > pmtimer0 on isa0

> > orm0: at iomem 0xcf000-0xcffff pnpid ORM0000 on isa0

> > sc0: at flags 0x100 on isa0

> > sc0: VGA

> > vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0

> > ppc0: parallel port not found.

> > ZFS NOTICE: Prefetch is disabled by default on i386 -- to enable,

> > add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.

> > ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable  
> behavior.

> > Consider tuning vm.kmem_size and vm.kmem_size_max

> > in /boot/loader.conf.

> > ZFS filesystem version 13

> > ZFS storage pool version 13

> > Timecounters tick every 1.000 msec

> > usbus0: 12Mbps Full Speed USB v1.0

> > usbus1: 12Mbps Full Speed USB v1.0

> > usbus2: 480Mbps High Speed USB v2.0

> > usbus3: 12Mbps Full Speed USB v1.0

> > usbus4: 12Mbps Full Speed USB v1.0

> > usbus5: 480Mbps High Speed USB v2.0

> > ad4: 152627MB at ata2-master SATA150

> > ugen0.1: at usbus0

> > uhub0: on usbus0

> > ugen1.1: at usbus1

> > uhub1: on usbus1

> > ugen2.1: at usbus2

> > uhub2: on usbus2

> > ugen3.1: at usbus3

> > uhub3: on usbus3

> > ugen4.1: at usbus4

> > uhub4: on usbus4

> > ugen5.1: at usbus5

> > uhub5: on usbus5

> > uhub0: 3 ports with 3 removable, self powered

> > uhub1: 3 ports with 3 removable, self powered

> > uhub3: 3 ports with 3 removable, self powered

> > uhub4: 3 ports with 3 removable, self powered

> > acd0: DVDR at ata4-master SATA150

> > uhub2: 6 ports with 6 removable, self powered

> > uhub5: 6 ports with 6 removable, self powered

> > ugen5.2: at usbus5

> > acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x48  
> 0x00 0x01

> > (probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0

> > (probe0:ata1:0:0:0): CAM Status: SCSI Status Error

> > (probe0:ata1:0:0:0): SCSI Status: Check Condition

> > (probe0:ata1:0:0:0): NOT READY asc:3a,1

> > (probe0:ata1:0:0:0): Medium not present - tray closed

> > (probe0:ata1:0:0:0): Unretryable error

> > acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x48  
> 0x00 0x01

> > SMP: AP CPU #1 Launched!

> > cd0 at ata1 bus 0 target 0 lun 0

> > cd0: Removable CD-ROM SCSI-0 device

> > cd0: 3.300MB/s transfers

> > cd0: Attempt to query device size failed: NOT READY, Medium not

> > present - tray closed

> > ugen5.3: at usbus5

> > umass0: on usbus5

> > umass0: SCSI over Bulk-Only; quirks = 0x0000

> > Root mount waiting for: usbus5

> > umass0:2:0:-1: Attached to scbus2

> > Trying to mount root from ufs:/dev/label/rootfs0

> > (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0

> > (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error

> > (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition

> > (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0

> > (probe0:umass-sim0:0:0:0): Medium not present

> > (probe0:umass-sim0:0:0:0): Unretryable error

> > da0 at umass-sim0 bus 0 target 0 lun 0

> > da0: Removable Direct Access SCSI-0 device

> > da0: 40.000MB/s transfers

> > da0: Attempt to query device size failed: NOT READY, Medium not present

> > wlan0: Ethernet address: 00:21:63:10:a4:d9

> > ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based

> > forwarding disabled, default to deny, logging disabled



> Error 6 corresponds to --



> #define ENXIO 6 /* Device not configured */



> -- is there a step that wasn't performed before powerd was called?

Not sure about this. It's a standard PCBSD install, I can send the rc.conf,  
loader.conf or whatever else is needed.


> Thanks,

> -Garrett

Comment 4 Hiren Panchasara 2013-04-30 07:55:54 UTC

Can you try CURRENT or any recent snapshot and see if the issue still exists?

Thanks,
Hiren

Comment 5 Eitan Adler 2017-12-31 08:01:33 UTC

For bugs matching the following criteria:

Status: In Progress Changed: (is less than) 2014-06-01

Reset to default assignee and clear in-progress tags.

Mail being skipped