FreeBSD install seem not be possible in any way on this hardware. I tried several ways to install 7.3|8.1 memstick|cd|dvd amd64|i386 Symptom: "Turning ASCII wheel" is viewable for a few seconds, then the Server reboots immediately. Can only boot Linux for providing system info (Fedora13/64bit) lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate 00:01.0 PCI bridge: Hewlett-Packard Company Device 9602 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:11.0 RAID bus controller: ATI Technologies Inc SB700/SB800 SATA Controller [Non-RAID5 mode] (rev 40) 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 41) 00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200] 02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5723 Gigabit Ethernet PCIe (rev 10) lsusb Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 003: ID 045e:00e1 Microsoft Corp. Wireless Laser Mouse 6000 Reciever Bus 004 Device 002: ID 04d9:1203 Holtek Semiconductor, Inc. MC Industries Keyboard Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 058f:6362 Alcor Micro Corp. Hi-Speed 21-in-1 Flash Card Reader/Writer (Internal/External) Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub dmesg Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.33.3-85.fc13.x86_64 (mockbuild@x86-02.phx2.fedoraproject.org) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #1 SMP Thu May 6 18:09:49 UTC 2010 Command line: initrd=/ubninit root=UUID=226D-7DDC rootfstype=auto ro liveimg quiet rhgb rd_NO_LUKS rd_NO_MD BOOT_IMAGE=/ubnkern BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000093000 (usable) BIOS-e820: 0000000000093000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000037830000 (usable) BIOS-e820: 0000000037f9e000 - 0000000037fa0000 type 9 BIOS-e820: 0000000037fa0000 - 0000000037fae000 (ACPI data) BIOS-e820: 0000000037fae000 - 0000000037fe0000 (ACPI NVS) BIOS-e820: 0000000037fe0000 - 0000000038000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved) NX (Execute Disable) protection: active DMI present. No AGP bridge found last_pfn = 0x37830 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000000 mask FFFFC0000000 write-back 1 disabled 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 found SMP MP-table at [ffff8800000ff780] ff780 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-0000000037830000 0000000000 - 0037800000 page 2M 0037800000 - 0037830000 page 4k kernel direct mapping tables up to 37830000 @ 8000-b000 RAMDISK: 36cc7000 - 3782e090 ACPI: RSDP 00000000000f8f50 00024 (v02 HP ) ACPI: XSDT 0000000037fa0100 0007C (v01 HP ProLiant 20100930 HP 00000097) ACPI: FACP 0000000037fa0290 000F4 (v03 HP ProLiant 20100930 HP 00000097) ACPI: DSDT 0000000037fa0620 06947 (v01 HP ProLiant 00000006 INTL 20051117) ACPI: FACS 0000000037fae000 00040 ACPI: APIC 0000000037fa0390 00072 (v01 HP ProLiant 20100930 HP 00000097) ACPI: MCFG 0000000037fa0410 0003C (v01 HP ProLiant 20100930 HP 00000097) ACPI: SPMI 0000000037fa0450 00041 (v05 HP ProLiant 20100930 HP 00000097) ACPI: OEMB 0000000037fae040 00072 (v01 HP ProLiant 20100930 HP 00000097) ACPI: HPET 0000000037fab4e0 00038 (v01 HP ProLiant 20100930 HP 00000097) ACPI: EINJ 0000000037fab520 00130 (v01 AMIER AMI_EINJ 20100930 HP 00000097) ACPI: BERT 0000000037fab6b0 00030 (v01 AMIER AMI_BERT 20100930 HP 00000097) ACPI: ERST 0000000037fab6e0 001B0 (v01 AMIER AMI_ERST 20100930 HP 00000097) ACPI: HEST 0000000037fab890 000A8 (v01 AMIER ABC_HEST 20100930 HP 00000097) ACPI: SSDT 0000000037fab940 00386 (v01 HP ProLiant 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-0000000037830000 Bootmem setup node 0 0000000000000000-0000000037830000 NODE_DATA [0000000000009000 - 000000000001efff] bootmap [000000000001f000 - 0000000000025f07] pages 7 (12 early reservations) ==> bootmem [0000000000 - 0037830000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 0001db92c8] TEXT DATA BSS ==> [0001000000 - 0001db92c8] #2 [0036cc7000 - 003782e090] RAMDISK ==> [0036cc7000 - 003782e090] #3 [0001dba000 - 0001dba0c4] BRK ==> [0001dba000 - 0001dba0c4] #4 [00000ff790 - 0000100000] BIOS reserved ==> [00000ff790 - 0000100000] #5 [00000ff780 - 00000ff790] MP-table mpf ==> [00000ff780 - 00000ff790] #6 [0000093000 - 00000fbb30] BIOS reserved ==> [0000093000 - 00000fbb30] #7 [00000fbc84 - 00000ff780] BIOS reserved ==> [00000fbc84 - 00000ff780] #8 [00000fbb30 - 00000fbc84] MP-table mpc ==> [00000fbb30 - 00000fbc84] #9 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000] #10 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000] #11 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880002200000-ffff880002ffffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x00000093 0: 0x00000100 -> 0x00037830 On node 0 totalpages: 227267 DMA zone: 56 pages used for memmap DMA zone: 115 pages reserved DMA zone: 3816 pages, LIFO batch:0 DMA32 zone: 3053 pages used for memmap DMA32 zone: 220227 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8300 base: 0xfed00000 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 0000000000093000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000 PM: Registered nosave memory: 00000000000e2000 - 0000000000100000 Allocating PCI resources starting at 38000000 (gap: 38000000:a8000000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s90520 r8192 d24168 u524288 pcpu-alloc: s90520 r8192 d24168 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Node order, mobility grouping on. Total pages: 224043 Policy zone: DMA32 Kernel command line: initrd=/ubninit root=UUID=226D-7DDC rootfstype=auto ro liveimg quiet rhgb rd_NO_LUKS rd_NO_MD BOOT_IMAGE=/ubnkern PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ 7f6000000 size 32 MB Aperture beyond 4GB. Ignoring. Memory: 868132k/909504k available (4295k kernel code, 436k absent, 40936k reserved, 7535k data, 756k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:440 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled allocated 9175040 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered Fast TSC calibration using PIT Detected 1297.800 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 2595.59 BogoMIPS (lpj=1297799) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys debug Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks using C1E aware idle routine Performance Events: AMD PMU driver. .. version: 0 .. bit width: 48 .. generic registers: 4 .. value mask: 0000ffffffffffff .. max period: 00007fffffffffff .. fixed-purpose events: 0 .. event mask: 000000000000000f ACPI: Core revision 20091214 Setting APIC routing to flat .TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) II Neo N36L Dual-Core Processor stepping 03 Booting Node 0, Processors #1 Brought up 2 CPUs Total of 2 processors activated (5217.26 BogoMIPS). System has AMD C1E enabled Switch to broadcast mode on CPU1 sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=584 bytes sizeof(dentry)=192 bytes sizeof(ext3inode)=792 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=5968 bytes Switch to broadcast mode on CPU0 devtmpfs: initialized regulator: core version 0.5 Time: 22:34:15 Date: 11/20/10 NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 0000000040000000 aka 1024M Fam 10h mmconf [e0000000, efffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [40000000, dfffffff] node 0 link 0: mmio [e0000000, f7ffffff] ==> [f0000000, f7ffffff] node 0 link 0: mmio [f8000000, fe6fffff] node 0 link 0: mmio [fe700000, fe8fffff] node 0 link 0: mmio [fe900000, ffdfffff] bus: [00, 1f] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [40000000, dfffffff] bus: 00 index 3 mmio: [f0000000, fcffffffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT \_SB_:_OSC evaluation returned wrong type _OSC request data:1 7 ACPI: Executed 2 blocks of module-level executable AML code ACPI: BIOS _OSI(Linux) query ignored ACPI: OEMN 0000000037faaeb0 00624 (v01 AMD NAHP 00000001 INTL 20051117) ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x38000000-0xdfffffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x38000000-0xdfffffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff] (ignored) pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:11.0: reg 10: [io 0xd000-0xd007] pci 0000:00:11.0: reg 14: [io 0xc000-0xc003] pci 0000:00:11.0: reg 18: [io 0xb000-0xb007] pci 0000:00:11.0: reg 1c: [io 0xa000-0xa003] pci 0000:00:11.0: reg 20: [io 0x9000-0x900f] pci 0000:00:11.0: reg 24: [mem 0xfe6ffc00-0xfe6fffff] pci 0000:00:12.0: reg 10: [mem 0xfe6fe000-0xfe6fefff] pci 0000:00:12.2: reg 10: [mem 0xfe6ff800-0xfe6ff8ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled pci 0000:00:13.0: reg 10: [mem 0xfe6fd000-0xfe6fdfff] pci 0000:00:13.2: reg 10: [mem 0xfe6ff400-0xfe6ff4ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] pci 0000:00:16.0: reg 10: [mem 0xfe6fc000-0xfe6fcfff] pci 0000:00:16.2: reg 10: [mem 0xfe6ff000-0xfe6ff0ff] pci 0000:00:16.2: supports D1 D2 pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:16.2: PME# disabled pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] pci 0000:01:05.0: reg 14: [io 0xe000-0xe0ff] pci 0000:01:05.0: reg 18: [mem 0xfe8f0000-0xfe8fffff] pci 0000:01:05.0: reg 24: [mem 0xfe700000-0xfe7fffff] pci 0000:01:05.0: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] pci 0000:00:01.0: bridge window [mem 0xfe700000-0xfe8fffff] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] pci 0000:02:00.0: reg 10: [mem 0xfe9f0000-0xfe9fffff 64bit] pci 0000:02:00.0: PME# supported from D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:06.0: PCI bridge to [bus 02-02] pci 0000:00:06.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0 ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0 ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0 ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0 ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0 ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0 ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0 ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0 vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 32-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:01: [mem 0x38000000-0x3fffffff] has been reserved system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved system 00:08: [io 0x04d0-0x04d1] has been reserved system 00:08: [io 0x040b] has been reserved system 00:08: [io 0x04d6] has been reserved system 00:08: [io 0x0c00-0x0c01] has been reserved system 00:08: [io 0x0c14] has been reserved system 00:08: [io 0x0c50-0x0c51] has been reserved system 00:08: [io 0x0c52] has been reserved system 00:08: [io 0x0c6c] has been reserved system 00:08: [io 0x0c6f] has been reserved system 00:08: [io 0x0cd0-0x0cd1] has been reserved system 00:08: [io 0x0cd2-0x0cd3] has been reserved system 00:08: [io 0x0cd4-0x0cd5] has been reserved system 00:08: [io 0x0cd6-0x0cd7] has been reserved system 00:08: [io 0x0cd8-0x0cdf] has been reserved system 00:08: [io 0x0800-0x089f] has been reserved system 00:08: [io 0x0b00-0x0b1f] has been reserved system 00:08: [io 0x0b20-0x0b3f] has been reserved system 00:08: [io 0x0900-0x090f] has been reserved system 00:08: [io 0x0910-0x091f] has been reserved system 00:08: [io 0xfe00-0xfefe] has been reserved system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved system 00:08: [mem 0xfed80000-0xfed80fff] has been reserved system 00:09: [mem 0xe0000000-0xefffffff] has been reserved system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0a: [mem 0x00100000-0x37ffffff] could not be reserved system 00:0a: [mem 0xfec00000-0xffffffff] could not be reserved pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] pci 0000:00:01.0: bridge window [mem 0xfe700000-0xfe8fffff] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] pci 0000:00:06.0: PCI bridge to [bus 02-02] pci 0000:00:06.0: bridge window [io disabled] pci 0000:00:06.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:06.0: bridge window [mem pref disabled] pci 0000:00:14.4: PCI bridge to [bus 03-03] pci 0000:00:14.4: bridge window [io disabled] pci 0000:00:14.4: bridge window [mem disabled] pci 0000:00:14.4: bridge window [mem pref disabled] alloc irq_desc for 18 on node 0 alloc kstat_irqs on node 0 pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:06.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xfe700000-0xfe8fffff] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] pci_bus 0000:03: resource 3 [io 0x0000-0xffff] pci_bus 0000:03: resource 4 [mem 0x00000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 pci 0000:01:05.0: Boot video device PCI: CLS 64 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 11676k freed Intel PCLMULQDQ-NI instructions are not detected. audit: initializing netlink socket (disabled) type=2000 audit(1290292455.456:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 1718 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:06.0: setting latency timer to 64 alloc irq_desc for 24 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:06.0: irq 24 for MSI/MSI-X pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 pci-stub: invalid id string "" input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: processor limited to max C-state 1 Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded input: intosh mouse button emulation as /devices/virtual/input/input2 ahci 0000:00:11.0: version 3.0 alloc irq_desc for 19 on node 0 alloc kstat_irqs on node 0 ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 alloc irq_desc for 25 on node 0 alloc kstat_irqs on node 0 ahci 0000:00:11.0: irq 25 for MSI/MSI-X ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports r3 Gbps 0xf impl RAID mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd00 irq 25 ata2: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd80 irq 25 ata3: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe00 irq 25 ata4: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe80 irq 25 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver alloc irq_desc for 17 on node 0 alloc kstat_irqs on node 0 ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe6ff800 ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.33.3-85.fc13.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:12.2 hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe6ff400 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.33.3-85.fc13.x86_64 ehci_hcd usb usb2: SerialNumber: 0000:00:13.2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 5 ports detected ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:16.2: EHCI Host Controller ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:16.2: debug port 1 ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe6ff000 ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: EHCI Host Controller usb usb3: Manufacturer: Linux 2.6.33.3-85.fc13.x86_64 ehci_hcd usb usb3: SerialNumber: 0000:00:16.2 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe6fe000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.33.3-85.fc13.x86_64 ohci_hcd usb usb4: SerialNumber: 0000:00:12.0 hub 4-0:1.0: USB hub found hub 4-0:1.0: 5 ports detected ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe6fd000 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: OHCI Host Controller usb usb5: Manufacturer: Linux 2.6.33.3-85.fc13.x86_64 ohci_hcd usb usb5: SerialNumber: 0000:00:13.0 hub 5-0:1.0: USB hub found hub 5-0:1.0: 5 ports detected ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:16.0: OHCI Host Controller ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe6fc000 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: OHCI Host Controller usb usb6: Manufacturer: Linux 2.6.33.3-85.fc13.x86_64 ohci_hcd usb usb6: SerialNumber: 0000:00:16.0 hub 6-0:1.0: USB hub found hub 6-0:1.0: 4 ports detected uhci_hcd: USB Universal Host Controller Interface driver PNP: No PS/2 controller found. Probing ports directly. mice: PS/2 mouse device common for all mice rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver nf_conntrack version 0.5.0 (6873 buckets, 27492 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 2:897:603 rtc_cmos 00:03: setting system clock to 2010-11-20 22:34:16 UTC (1290292456) Initalizing network drop monitor service ata2: SATA link down (SStatus 0 SControl 300) usb 1-3: new high speed USB device using ehci_hcd and address 3 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: failed to enable AA(error_mask=0x1) ata1.00: ATA-8: VB0160EAVEQ, HPG0, max UDMA/100 ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: failed to enable AA(error_mask=0x1) ata1.00: configured for UDMA/100 ata3.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7 ata3.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata4.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7 ata4.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA scsi 0:0:0:0: Direct-Access ATA VB0160EAVEQ HPG0 PQ: 0 ANSI: 5 ata3.00: configured for UDMA/133 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: ata4.00: configured for UDMA/133 usb 1-3: New USB device found, idVendor=058f, idProduct=6362 usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3: Product: Mass Storage Device usb 1-3: Manufacturer: Generic usb 1-3: SerialNumber: 058F312D81B1 scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1AG0 PQ: 0 ANSI: 5 sd 2:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1AG0 PQ: 0 ANSI: 5 sd 3:0:0:0: Attached scsi generic sg2 type 0 sd 3:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) sd 3:0:0:0: [sdc] Write Protect is off sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: unknown partition table sd 2:0:0:0: [sdb] Attached SCSI disk unknown partition table sd 0:0:0:0: [sda] Attached SCSI disk unknown partition table sd 3:0:0:0: [sdc] Attached SCSI disk Freeing unused kernel memory: 756k freed Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 1828k freed Freeing unused kernel memory: 1960k freed dracut: dracut-005-3.fc13 dracut: rd_NO_LUKS: removing cryptoluks activation dracut: root was live:/dev/disk/by-uuid/226D-7DDC, liveroot is now live:UUID=226D-7DDC udev: starting version 151 [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 radeon 0000:01:05.0: setting latency timer to 64 [drm] radeon: Initializing kernel modesetting. [drm] register mmio base: 0xFE8F0000 [drm] register mmio size: 65536 ATOM BIOS: AMD_1407_150 [drm] Clocks initialized ! [drm] Detected VRAM RAM=128M, BAR=128M [drm] RAM width 32bits DDR [TTM] Zone kernel: Available graphics memory: 442178 kiB. [ttm] Initializing pool allocator. [drm] radeon: 128M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] Loading RS780 Microcode platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin platform radeon_cp.0: firmware: requesting radeon/RS780_me.bin platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin usb 4-2: new low speed USB device using ohci_hcd and address 2 [drm] ring test succeeded in 0 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Enabling audio support [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] fb mappable at 0xF0141000 [drm] vram apper at 0xF0000000 [drm] size 5242880 [drm] fb depth is 24 [drm] pitch is 5120 fbcon: radeondrmfb (fb0) is primary device usb 4-2: New USB device found, idVendor=04d9, idProduct=1203 usb 4-2: New USB device strings: Mfr=0, Product=0, Number=0 input: HID 04d9:1203 as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/input/input3 generic-usb 0003:04D9:1203.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 04d9:1203] on usb-0000:00:12.0-2/input0 Console: switching to colour frame buffer device 160x64 input: HID 04d9:1203 as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.1/input/input4 generic-usb 0003:04D9:1203.0002: input,hidraw1: USB HID v1.11 Device [HID 04d9:1203] on usb-0000:00:12.0-2/input1 fb0: radeondrmfb frame buffer device registered panic notifier [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0 dracut: Starting plymouth daemon dracut: rd_NO_MD: removing MD RAID activation pata_atiixp 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pata_atiixp 0000:00:14.1: setting latency timer to 64 scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 Initializing USB Mass Storage driver... scsi6 : usb-storage 1-3:1.0 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. ata5.01: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100 ata5.01: limited to UDMA/33 due to 40-wire cable ata5.01: configured for UDMA/33 scsi 4:0:1:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN02 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:1:0: Attached scsi CD-ROM sr0 sr 4:0:1:0: Attached scsi generic sg3 type 5 scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 sd 6:0:0:0: Attached scsi generic sg4 type 0 sd 6:0:0:1: Attached scsi generic sg5 type 0 sd 6:0:0:2: Attached scsi generic sg6 type 0 sd 6:0:0:3: Attached scsi generic sg7 type 0 sd 6:0:0:0: [sdd] Attached SCSI removable disk sd 6:0:0:3: [sdg] Attached SCSI removable disk sd 6:0:0:2: [sdf] Attached SCSI removable disk sd 6:0:0:1: [sde] 2031120 512-byte logical blocks: (1.03 GB/991 MiB) sd 6:0:0:1: [sde] Write Protect is off sd 6:0:0:1: [sde] Mode Sense: 03 00 00 00 sd 6:0:0:1: [sde] Assuming drive cache: write through sd 6:0:0:1: [sde] Assuming drive cache: write through sde: sde1 sd 6:0:0:1: [sde] Assuming drive cache: write through sd 6:0:0:1: [sde] Attached SCSI removable disk squashfs: version 4.0 (2009/01/31) Phillip Lougher EXT4-fs (dm-0): mounted filesystem with ordered data mode dracut: Mounted root filesystem /dev/mapper/live-rw dracut: Loading SELinux policy type=1404 audit(1290292464.023:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 8192 avtab hash slots, 196425 rules. SELinux: 8192 avtab hash slots, 196425 rules. SELinux: 9 users, 13 roles, 3233 types, 157 bools, 1 sens, 1024 cats SELinux: 77 classes, 196425 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext4), uses xattr SELinux: initialized (dev loop2, type squashfs), not configured for labeling SELinux: initialized (dev loop0, type squashfs), not configured for labeling SELinux: initialized (dev sde1, type vfat), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1290292464.442:3): policy loaded auid=4294967295 ses=4294967295 dracut: Switching root readahead: starting udev: starting version 151 tg3.c:v3.106 (January 12, 2010) tg3 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 tg3 0000:02:00.0: setting latency timer to 64 EDAC MC: Ver: 2.1.0 May 6 2010 microcode: CPU0: patch_level=0x10000c8 platform microcode: firmware: requesting amd-ucode/microcode_amd.bin EDAC amd64_edac: Ver: 3.3.0 May 6 2010 piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 eth0: Tigon3 [partno(BCM95723) rev 5784100] (PCI Express) MAC address eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1]) eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 EDAC amd64: ECC is enabled by BIOS. EDAC MC: F10h CPU detected EDAC MC: DCT0 chip selects: EDAC MC: 0: 1024MB 1: 0MB EDAC MC: 2: 0MB 3: 0MB EDAC MC: 4: 0MB 5: 0MB EDAC MC: 6: 0MB 7: 0MB EDAC MC: DCT1 chip selects: EDAC MC: 0: 0MB 1: 0MB EDAC MC: 2: 0MB 3: 0MB EDAC MC: 4: 0MB 5: 0MB EDAC MC: 6: 0MB 7: 0MB EDAC MC0: Giving out device to 'amd64_edac' 'Family 10h': DEV 0000:00:18.2 EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) microcode: CPU1: patch_level=0x10000c8 platform microcode: firmware: requesting amd-ucode/microcode_amd.bin microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba type=1400 audit(1290310467.337:4): avc: denied { mmap_zero } for pid=959 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect microcode: AMD microcode update via /dev/cpu/microcode not supported microcode: AMD microcode update via /dev/cpu/microcode not supported microcode: AMD microcode update via /dev/cpu/microcode not supported microcode: AMD microcode update via /dev/cpu/microcode not supported microcode: AMD microcode update via /dev/cpu/microcode not supported SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team powernow-k8: Found 1 AMD Athlon(tm) II Neo N36L Dual-Core Processor processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : pstate 0 (1300 MHz) powernow-k8: 1 : pstate 1 (1100 MHz) powernow-k8: 2 : pstate 2 (800 MHz) alloc irq_desc for 26 on node 0 alloc kstat_irqs on node 0 tg3 0000:02:00.0: irq 26 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready tg3: eth0: Link is down. tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. eth0: no IPv6 routers present usb 4-1: new low speed USB device using ohci_hcd and address 3 usb 4-1: New USB device found, idVendor=045e, idProduct=00e1 usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-1: Product: Microsoft Wireless Optical Mouse® 1.00 usb 4-1: Manufacturer: Microsoft input: Microsoft Microsoft Wireless Optical Mouse® 1.00 as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/input/input5 generic-usb 0003:045E:00E1.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.00] on usb-0000:00:12.0-1/input0 tg3: eth0: Link is down. tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. lscpu Architecture: x86_64 CPU op-mode(s): 64-bit CPU(s): 2 Thread(s) per core: 1 Core(s) per socket: 2 CPU socket(s): 1 NUMA node(s): 1 Vendor ID: AuthenticAMD CPU family: 16 Model: 6 Stepping: 3 CPU MHz: 800.000 Virtualization: AMD-V L1d cache: 64K L1i cache: 64K L2 cache: 1024K How-To-Repeat: Try installing FreeBSD
Just to clarify - the reset happens between loader and kernel? Can you try a recent CURRENT snapshot? Also, I suggest that you try to discuss this issue on current@ or stable@ mailing list depending on which FreeBSD versions you try. Thanks! -- Andriy Gapon
Not sure if this is how to report more information but I also have a HP Proliant Microserver running Arch. It has been stable for a couple of months. Re-booted the box this evening and I am now getting this error which is stopping the system booting. I am also receiving the following error above it 'Address Space collision: host bridge window conflicts with ROM' Any assistance you could offer will be gratefully received Thanks Pete
For bugs matching the following criteria: Status: In Progress Changed: (is less than) 2014-06-01 Reset to default assignee and clear in-progress tags. Mail being skipped