This is a failed ADC DC calibration: wlan1: [00:03:7f:12:e2:3a] HT bss occupancy change: 1 sta, 1 ht, 0 ht40, HT protmode now 0x2 ar5416GetMibCycleCountsPct: cycle counter wrap. ExtBusy = 0 ar5416ResetCalValid: Resetting Cal 4 state for channel 2437/0x20480 ar5416DoCalibration: ADC DC Calibration, state 1, calValid 0x8 ar5416SetupMeasurement: start ADC DC calibration ar9287olcTemperatureCompensation: initPDADC=125, currPDADC=120 ar9287olcTemperatureCompensation: delta=3 NF calibrated [ctl] [chain 0] is -123 NF calibrated [ctl] [chain 1] is -121 NF calibrated [ext] [chain 0] is -123 NF calibrated [ext] [chain 1] is -122 CCA: [0: -123][1: -121][3: -123][4: -121] 2437 raw nf -123 adjust 27 ar5416DoCalibration: ADC DC Calibration, state 2, calValid 0x8 ar5416DoCalibration: sample 0 of 1 finished 0: Chn 0 oddi=0x11a421e8; eveni=0x11a3b3d3; oddq=0x1198f4e5; evenq=0x1198f059; 0: Chn 1 oddi=0x13ac3b5b; eveni=0x13abe3a7; oddq=0x129faaac; evenq=0x129fa663; 0: Chn 2 oddi=0x00000000; eveni=0x00000000; oddq=0x00000000; evenq=0x00000000; Starting ADC DC Offset Cal for Chain 0 pwr_meas_odd_i = 295969256 pwr_meas_even_i = 295941075 pwr_meas_odd_q = 295236837 pwr_meas_even_q = 295235673 dc_offset_mismatch_i = 0x00000047 dc_offset_mismatch_q = 0x00000012 ADC DC Offset Cal done for Chain 0Starting ADC DC Offset Cal for Chain 1 pwr_meas_odd_i = 330054491 pwr_meas_even_i = 330032039 pwr_meas_odd_q = 312453804 pwr_meas_even_q = 312452707 dc_offset_mismatch_i = 0x000000a1 dc_offset_mismatch_q = 0x00000011 ADC DC Offset Cal done for Chain 1 ath1: stuck beacon; resetting (bmiss count 4) . then: ar5416SetupMeasurement: start ADC DC calibrationar5416GetMibCycleCountsPct: cycle counter wrap. ExtBusy = 0 ar5416DoCalibration: ADC DC Calibration, state 2, calValid 0x0 ar5416DoCalibration: sample 0 of 1 finished 0: Chn 0 oddi=0x00000057; eveni=0x00000086; oddq=0x0000031d; evenq=0x000001ba; 0: Chn 1 oddi=0x0000025f; eveni=0x000002d5; oddq=0xfffffe85; evenq=0xfffffdcf; 0: Chn 2 oddi=0x00000000; eveni=0x00000000; oddq=0x00000000; evenq=0x00000000; Starting ADC DC Offset Cal for Chain 0 pwr_meas_odd_i = 87 pwr_meas_even_i = 134 pwr_meas_odd_q = 797 pwr_meas_even_q = 442 dc_offset_mismatch_i = 0x00000000 dc_offset_mismatch_q = 0x00000005 ADC DC Offset Cal done for Chain 0 Starting ADC DC Offset Cal for Chain 1 pwr_meas_odd_i = 607 pwr_meas_even_i = 725 pwr_meas_odd_q = -379 pwr_meas_even_q = -561 dc_offset_mismatch_i = 0x00000001 dc_offset_mismatch_q = 0x00000002 ADC DC Offset Cal done for Chain 1 How-To-Repeat: . just run it as a hostap?
Responsible Changed From-To: freebsd-bugs->freebsd-wireless Over to maintainer(s).
batch change: For bugs that match the following - Status Is In progress AND - Untouched since 2018-01-01. AND - Affects Base System OR Documentation DO: Reset to open status. Note: I did a quick pass but if you are getting this email it might be worthwhile to double check to see if this bug ought to be closed.