Bug 164058 - [umass] Lexar 8GB USB flash drive doesn't work by default
Summary: [umass] Lexar 8GB USB flash drive doesn't work by default
Status: Open
Alias: None
Product: Base System
Classification: Unclassified
Component: usb (show other bugs)
Version: 9.0-RELEASE
Hardware: Any Any
: Normal Affects Only Me
Assignee: freebsd-usb (Nobody)
URL:
Keywords:
Depends on:
Blocks:
 
Reported: 2012-01-12 18:00 UTC by Mike Marcos
Modified: 2017-12-31 22:29 UTC (History)
0 users

See Also:

Attachments
Add an attachment (proposed patch, testcase, etc.)

Note You need to log in before you can comment on or make changes to this bug.
Description Mike Marcos 2012-01-12 18:00:33 UTC 
Same issue as in usb/160911
###
dmesg after pugging in the usb stick

ugen1.3: <Lexar> at usbus1
umass0: <Lexar JD FireFly, class 0/0, rev 2.00/11.00, addr 3> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x0100
umass0:2:0:-1: Attached to scbus2

No device was created.

usbconfig:
ugen1.3: <JD FireFly Lexar> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON

Fix: 

usbconfig -d 1.3 add_quirk UQ_MSC_NO_SYNC_CACHE
usbconfig -d 1.3 reset

then dmesg:

da2 at umass-sim0 bus 0 scbus2 target 0 lun 0
da2: <Lexar JD FireFly 1100> Removable Direct Access SCSI-0 device 
da2: 40.000MB/s transfers
da2: 7648MB (15663104 512 byte sectors: 255H 63S/T 974C)
How-To-Repeat: plug in Lexar FireFly 8GB USB Stick
Comment 1 Eitan Adler freebsd_committer freebsd_triage 2017-12-31 08:00:25 UTC 
For bugs matching the following criteria:

Status: In Progress Changed: (is less than) 2014-06-01

Reset to default assignee and clear in-progress tags.

Mail being skipped