I have written the 9.0-RELEASE memstick image to a USB device on a Linux machine using these commands: # dd if=/dev/zero of=/dev/sdb # dd if=FreeBSD-9.0-RELEASE-i386-memstick.img of=/dev/sdb bs=64k When I try to boot from the USB memory stick I get a blank screen. How-To-Repeat: The problem is reproducible using other arguments to the dd command such as 'bs=10240 conv=sync' and 'bs=4096'
I'm experiencing similar with 11.0-Release. The system won't complete POST with the memstick connected. It's a Dell Inspiron 545 Core 2 Quad with G33 chipset. Meanwhile a CD install works fine. I found a few messages indicating this might be an issue with EFI.
batch change: For bugs that match the following - Status Is In progress AND - Untouched since 2018-01-01. AND - Affects Base System OR Documentation DO: Reset to open status. Note: I did a quick pass but if you are getting this email it might be worthwhile to double check to see if this bug ought to be closed.
Unfortunately this PR was never addressed before these versions of FreeBSD went out of support. Sorry. If this is still a problem, please open a new PR. Thanks.