chromium 18/19 crash system How-To-Repeat: random run chromium gcc-4.6.4.20120608, chromium-19.0.1084.56_1 or system's clang, chromium-18 Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.0-CURRENT #7 r237128: Sat Jun 16 11:28:13 CST 2012 root@datastream.local:/usr/obj/usr/src/sys/G10laptop amd64 module_register: module vesa already exists! Module vesa failed to register: 17 CPU: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz (2394.06-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6fb Family = 6 Model = f Stepping = 11 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 4007866368 (3822 MB) ACPI APIC Table: <LENOVO TP-7L > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20120518/tbfadt-596) ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20120518/tbfadt-625) ioapic0: Changing APIC ID to 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ctl: CAM Target Layer loaded acpi0: <LENOVO TP-7L> on motherboard CPU0: local APIC error 0x40 acpi_ec0: <Embedded Controller: GPE 0x12, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, bff00000 (3) failed cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x2000-0x207f mem 0xd2000000-0xd2ffffff,0xe0000000-0xefffffff,0xd0000000-0xd1ffffff irq 16 at device 0.0 on pci1 nvidia0: <Quadro NVS 140M> on vgapci0 vgapci0: child nvidia0 requested pci_enable_io vgapci0: child nvidia0 requested pci_enable_io em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0x1840-0x185f mem 0xfe200000-0xfe21ffff,0xfe225000-0xfe225fff irq 20 at device 25.0 on pci0 em0: Using an MSI interrupt em0: Ethernet address: 00:1c:25:1c:fb:d0 uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x1860-0x187f irq 20 at device 26.0 on pci0 usbus0 on uhci0 uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x1880-0x189f irq 21 at device 26.1 on pci0 usbus1 on uhci1 ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfe226c00-0xfe226fff irq 22 at device 26.7 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci0 hdac0: <Intel 82801H HDA Controller> mem 0xfe220000-0xfe223fff irq 17 at device 27.0 on pci0 pcib2: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <memory> at device 0.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0 pci3: <ACPI PCI bus> on pcib3 iwn0: <Intel Wireless WiFi Link 4965> mem 0xd7dfe000-0xd7dfffff irq 17 at device 0.0 on pci3 pcib4: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> irq 20 at device 28.4 on pci0 pci13: <ACPI PCI bus> on pcib6 uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x18a0-0x18bf irq 16 at device 29.0 on pci0 usbus3 on uhci2 uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x18c0-0x18df irq 17 at device 29.1 on pci0 usbus4 on uhci3 uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x18e0-0x18ff irq 18 at device 29.2 on pci0 usbus5 on uhci4 ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfe227000-0xfe2273ff irq 19 at device 29.7 on pci0 usbus6: EHCI version 1.0 usbus6 on ehci1 pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci21: <ACPI PCI bus> on pcib7 cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xf8100000-0xf8100fff irq 16 at device 0.0 on pci21 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1830-0x183f at device 31.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ahci0: <Intel ICH8M AHCI SATA controller> port 0x1c48-0x1c4f,0x1c1c-0x1c1f,0x1c40-0x1c47,0x1c18-0x1c1b,0x1c20-0x1c3f mem 0xfe226000-0xfe2267ff irq 16 at device 31.2 on pci0 ahci0: AHCI v1.10 with 3 1.5Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Synaptics Touchpad, device ID 0 tpm0: <Trusted Platform Module> iomem 0xfed40000-0xfed44fff on acpi0 tpm: device 0x32031114 rev 0x9 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff,0xd0000-0xd0fff,0xe0000-0xeffff on isa0 sc0: <System console> at flags 0x1490180 on isa0 sc0: VGA <16 virtual consoles, flags=0x1490380> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 10.000 msec hdacc0: <Analog Devices AD1984 HDA CODEC> at cad 0 on hdac0 hdaa0: <Analog Devices AD1984 HDA CODEC Audio Function Group> at nid 1 on hdacc0 pcm0: <Analog Devices AD1984 HDA CODEC PCM (Analog 2.0+HP/2.0)> at nid 18,17 and 28,20,21 on hdaa0 pcm1: <Analog Devices AD1984 HDA CODEC PCM (Ext-Rear Digital)> at nid 27 on hdaa0 hdacc1: <Conexant (0x2bfa) HDA CODEC> at cad 1 on hdac0 unknown: <Conexant (0x2bfa) HDA CODEC Modem Function Group> at nid 2 on hdacc1 (no driver attached) usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 GEOM_SCHED: Initializing global data. GEOM_SCHED: Loading: mp = 0xffffffff823584a0, g_sched_class = 0xffffffff823584a0. battery0: critically low charge! uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 ada0: <ST9320320AS SD03> ATA-8 SATA 2.x device cd0 at ata0 bus 0 scbus0 target 0 lun 0 cd0: <Optiarc DVD RW AD-7910A 1.D1> Removable CD-ROM SCSI-0 device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 SMP: AP CPU #1 Launched! Root mount waiting for: usbus6 usbus2 uhub2: 4 ports with 4 removable, self powered Root mount waiting for: usbus6 usbus2 uhub6: 6 ports with 6 removable, self powered ugen6.2: <vendor 0x0409> at usbus6 uhub7: <vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2> on usbus6 ugen0.2: <Broadcom Corp> at usbus0 ubt0: <Broadcom Corp BCM2045B, class 224/1, rev 2.00/1.00, addr 2> on usbus0 Root mount waiting for: usbus6 uhub7: 3 ports with 2 removable, bus powered ugen0.3: <STMicroelectronics> at usbus0 ugen6.3: <Topre Corporation> at usbus6 ukbd0: <Topre Corporation HHKB Professional, class 0/0, rev 1.10/1.02, addr 3> on usbus6 kbd2 at ukbd0 Trying to mount root from ufs:/dev/ada0s1a [rw]... IP Filter: v4.1.28 initialized. Default = pass all, Logging = enabled wlan0: Ethernet address: 00:1d:e0:48:13:2f WARNING: attempt to domain_add(bluetooth) after domainfinalize() WARNING: attempt to domain_add(netgraph) after domainfinalize() wlan0: link state changed to UP wlan0: link state changed to DOWN Fatal trap 12: page fault while in kernel mode cpuid = 0; apic id = 00 fault virtual address = 0x8 fault code = supervisor read data, page not present instruction pointer = 0x20:0xffffffff8046e9de stack pointer = 0x28:0xffffff80a8206270 frame pointer = 0x28:0xffffff80a8206340 code segment = base rx0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 3436 (chrome) trap number = 12 panic: page fault cpuid = 0 KDB: enter: panic Fatal trap 3: breakpoint instruction fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0xffffffff804e56ee stack pointer = 0x28:0xffffff80a8205e60 frame pointer = 0x28:0xffffff80a8205e80 code segment = base rx0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = IOPL = 0 current process = 3436 (chrome) trap number = 3 panic: breakpoint instruction fault cpuid = 0 KDB: enter: panic Fatal trap 3: breakpoint instruction fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0xffffffff804e56ee stack pointer = 0x28:0xffffff80a8205b10 frame pointer = 0x28:0xffffff80a8205b30 code segment = base rx0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = IOPL = 0 current process = 3436 (chrome) trap number = 3 panic: breakpoint instruction fault cpuid = 0 KDB: enter: panic Fatal trap 3: breakpoint instruction fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0xffffffff804e56ee stack pointer = 0x28:0xffffff80a82057c0 frame pointer = 0x28:0xffffff80a82057e0 code segment = base rx0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = IOPL = 0 current process = 3436 (chrome) trap number = 3 panic: breakpoint instruction fault cpuid = 0 KDB: enter: panic Fatal trap 3: breakpoint instruction fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0xffffffff804e56ee stack pointer = 0x28:0xffffff80a8205470 frame pointer = 0x28:0xffffff80a8205490 code segment = base rx0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = IOPL = 0 current process = 3436 (chrome) trap number = 3 panic: breakpoint instruction fault cpuid = 0 KDB: enter: panic Fatal trap 3: breakpoint instruction fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0xffffffff804e56ee stack pointer = 0x28:0xffffff80a8205120 frame pointer = 0x28:0xffffff80a8205140 code segment = base rx0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = IOPL = 0 current process = 3436 (chrome) trap number = 3 panic: breakpoint instruction fault cpuid = 0 KDB: enter: panic Fatal trap 3: breakpoint instruction fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0xffffffff804e56ee stack pointer = 0x28:0xffffff80a8204dd0 frame pointer = 0x28:0xffffff80a8204df0 code segment = base rx0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = IOPL = 0 current process = 3436 (chrome) trap number = 3 panic: breakpoint instruction fault cpuid = 0 KDB: enter: panic Fatal trap 3: breakpoint instruction fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0xffffffff804e56ee stack pointer = 0x28:0xffffff80a8204a80 frame pointer = 0x28:0xffffff80a8204aa0 code segment = base rx0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = IOPL = 0 current process = 3436 (chrome) trap number = 3 panic: breakpoint instruction fault cpuid = 0 KDB: enter: panic Fatal trap 3: breakpoint instruction fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0xffffffff804e56ee stack pointer = 0x28:0xffffff80a8204730 frame pointer = 0x28:0xffffff80a8204750 code segment = base rx0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = IOPL = 0 current process = 3436 (chrome) trap number = 3 panic: breakpoint instruction fault cpuid = 0 KDB: enter: panic Fatal trap 3: breakpoint instruction fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0xffffffff804e56ee stack pointer = 0x28:0xffffff80a82043e0 frame pointer = 0x28:0xffffff80a8204400 code segment = base rx0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = IOPL = 0 current process = 3436 (chrome) trap number = 3 panic: breakpoint instruction fault cpuid = 0 KDB: enter: panic Fatal trap 3: breakpoint instruction fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0xffffffff804e56ee stack pointer = 0x28:0xffffff80a8204090 frame pointer = 0x28:0xffffff80a82040b0 code segment = base rx0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = IOPL = 0 current process = 3436 (chrome) trap number = 3 panic: breakpoint instruction fault cpuid = 0 KDB: enter: panic Fatal trap 3: breakpoint instruction fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0xffffffff804e56ee stack pointer = 0x28:0xffffff80a8203d40 frame pointer = 0x28:0xffffff80a8203d60 code segment = base rx0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = IOPL = 0 current process = 3436 (chrome) trap number = 3 panic: breakpoint instruction fault cpuid = 0 KDB: enter: panic Fatal trap 3: breakpoint instruction fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0xffffffff804e56ee stack pointer = 0x28:0xffffff80a82039f0 frame pointer = 0x28:0xffffff80a8203a10 code segment = base rx0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = IOPL = 0 current process = 3436 (chrome) trap number = 3 panic: breakpoint instruction fault cpuid = 0 KDB: enter: panic Fatal double fault rip = 0xffffffff8075b84f rsp = 0xffffff80a8202ff0 rbp = 0xffffff80a8203030 cpuid = 0; apic id = 00 panic: double fault cpuid = 0 KDB: enter: panic Fatal trap 3: breakpoint instruction fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0xffffffff804e56ee stack pointer = 0x28:0xffffffff80b56670 frame pointer = 0x28:0xffffffff80b56690 code segment = base rx0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = IOPL = 0 current process = 3436 (chrome) trap number = 3 panic: breakpoint instruction fault cpuid = 0 KDB: enter: panic Fatal trap 3: breakpoint instruction fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0xffffffff804e56ee stack pointer = 0x28:0xffffffff80b56320 frame pointer = 0x28:0xffffffff80b56340 code segment = base rx0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = IOPL = 0 current process = 3436 (chrome) trap number = 3 panic: breakpoint instruction fault cpuid = 0 KDB: enter: panic Fatal trap 3: breakpoint instruction fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0xffffffff804e56ee stack pointer = 0x28:0xffffffff80b55fd0 frame pointer = 0x28:0xffffffff80b55ff0 code segment = base rx0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = IOPL = 0 current process = 3436 (chrome) trap number = 3 panic: breakpoint instruction fault cpuid = 0 KDB: enter: panic Fatal trap 3: breakpoint instruction fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0xffffffff804e56ee stack pointer = 0x28:0xffffffff80b55c80 frame pointer = 0x28:0xffffffff80b55ca0 code segment = base rx0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = IOPL = 0 current process = 3436 (chrome) trap number = 3 panic: breakpoint instruction fault cpuid = 0 KDB: enter: panic Fatal trap 3: breakpoint instruction fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0xffffffff804e56ee stack pointer = 0x28:0xffffffff80b55930 frame pointer = 0x28:0xffffffff80b55950 code segment = base rx0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = IOPL = 0 current process = 3436 (chrome) trap number = 3 panic: breakpoint instruction fault cpuid = 0 KDB: enter: panic Fatal trap 3: breakpoint instruction fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0xffffffff804e56ee stack pointer = 0x28:0xffffffff80b555e0 frame pointer = 0x28:0xffffffff80b55600 code segment = base rx0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = IOPL = 0 current process = 3436 (chrome) trap number = 3 panic: breakpoint instruction fault cpuid = 0 KDB: enter: panic Fatal trap 3: breakpoint instruction fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0xffffffff804e56ee stack pointer = 0x28:0xffffffff80b55290 frame pointer = 0x28:0xffffffff80b552b0 code segment = base rx0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = IOPL = 0 current process = 3436 (chrome) trap number = 3 panic: breakpoint instruction fault cpuid = 0 KDB: enter: panic Fatal trap 3: breakpoint instruction fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0xffffffff804e56ee stack pointer = 0x28:0xffffffff80b54f40 frame pointer = 0x28:0xffffffff80b54f60 code segment = base rx0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = IOPL = 0 current process = 3436 (chrome) trap number = 3 panic: breakpoint instruction fault cpuid = 0 KDB: enter: panic Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.0-CURRENT #7 r237128: Sat Jun 16 11:28:13 CST 2012 root@datastream.local:/usr/obj/usr/src/sys/G10laptop amd64 module_register: module vesa already exists! Module vesa failed to register: 17 CPU: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz (2394.05-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6fb Family = 6 Model = f Stepping = 11 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 4007866368 (3822 MB) ACPI APIC Table: <LENOVO TP-7L > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20120518/tbfadt-596) ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20120518/tbfadt-625) ioapic0: Changing APIC ID to 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ctl: CAM Target Layer loaded acpi0: <LENOVO TP-7L> on motherboard CPU0: local APIC error 0x40 acpi_ec0: <Embedded Controller: GPE 0x12, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, bff00000 (3) failed cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x2000-0x207f mem 0xd2000000-0xd2ffffff,0xe0000000-0xefffffff,0xd0000000-0xd1ffffff irq 16 at device 0.0 on pci1 nvidia0: <Quadro NVS 140M> on vgapci0 vgapci0: child nvidia0 requested pci_enable_io vgapci0: child nvidia0 requested pci_enable_io em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0x1840-0x185f mem 0xfe200000-0xfe21ffff,0xfe225000-0xfe225fff irq 20 at device 25.0 on pci0 em0: Using an MSI interrupt em0: Ethernet address: 00:1c:25:1c:fb:d0 uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x1860-0x187f irq 20 at device 26.0 on pci0 usbus0 on uhci0 uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x1880-0x189f irq 21 at device 26.1 on pci0 usbus1 on uhci1 ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfe226c00-0xfe226fff irq 22 at device 26.7 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci0 hdac0: <Intel 82801H HDA Controller> mem 0xfe220000-0xfe223fff irq 17 at device 27.0 on pci0 pcib2: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <memory> at device 0.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0 pci3: <ACPI PCI bus> on pcib3 iwn0: <Intel Wireless WiFi Link 4965> mem 0xd7dfe000-0xd7dfffff irq 17 at device 0.0 on pci3 pcib4: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> irq 20 at device 28.4 on pci0 pci13: <ACPI PCI bus> on pcib6 uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x18a0-0x18bf irq 16 at device 29.0 on pci0 usbus3 on uhci2 uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x18c0-0x18df irq 17 at device 29.1 on pci0 usbus4 on uhci3 uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x18e0-0x18ff irq 18 at device 29.2 on pci0 usbus5 on uhci4 ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfe227000-0xfe2273ff irq 19 at device 29.7 on pci0 usbus6: EHCI version 1.0 usbus6 on ehci1 pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci21: <ACPI PCI bus> on pcib7 cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xf8100000-0xf8100fff irq 16 at device 0.0 on pci21 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1830-0x183f at device 31.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ahci0: <Intel ICH8M AHCI SATA controller> port 0x1c48-0x1c4f,0x1c1c-0x1c1f,0x1c40-0x1c47,0x1c18-0x1c1b,0x1c20-0x1c3f mem 0xfe226000-0xfe2267ff irq 16 at device 31.2 on pci0 ahci0: AHCI v1.10 with 3 1.5Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Synaptics Touchpad, device ID 0 tpm0: <Trusted Platform Module> iomem 0xfed40000-0xfed44fff on acpi0 tpm: device 0x32031114 rev 0x9 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff,0xd0000-0xd0fff,0xe0000-0xeffff on isa0 sc0: <System console> at flags 0x1490180 on isa0 sc0: VGA <16 virtual consoles, flags=0x1490380> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 10.000 msec hdacc0: <Analog Devices AD1984 HDA CODEC> at cad 0 on hdac0 hdaa0: <Analog Devices AD1984 HDA CODEC Audio Function Group> at nid 1 on hdacc0 pcm0: <Analog Devices AD1984 HDA CODEC PCM (Analog 2.0+HP/2.0)> at nid 18,17 and 28,20,21 on hdaa0 pcm1: <Analog Devices AD1984 HDA CODEC PCM (Ext-Rear Digital)> at nid 27 on hdaa0 hdacc1: <Conexant (0x2bfa) HDA CODEC> at cad 1 on hdac0 unknown: <Conexant (0x2bfa) HDA CODEC Modem Function Group> at nid 2 on hdacc1 (no driver attached) usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 GEOM_SCHED: Initializing global data. GEOM_SCHED: Loading: mp = 0xffffffff823584a0, g_sched_class = 0xffffffff823584a0. battery0: critically low charge! uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 ada0: <ST9320320AS SD03> ATA-8 SATA 2.x device cd0 at ata0 bus 0 scbus0 target 0 lun 0 cd0: <Optiarc DVD RW AD-7910A 1.D1> Removable CD-ROM SCSI-0 device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 SMP: AP CPU #1 Launched! Root mount waiting for: usbus6 usbus2 uhub2: 4 ports with 4 removable, self powered Root mount waiting for: usbus6 usbus2 uhub6: 6 ports with 6 removable, self powered ugen6.2: <vendor 0x0409> at usbus6 uhub7: <vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2> on usbus6 ugen0.2: <Broadcom Corp> at usbus0 ubt0: <Broadcom Corp BCM2045B, class 224/1, rev 2.00/1.00, addr 2> on usbus0 Root mount waiting for: usbus6 uhub7: 3 ports with 2 removable, bus powered ugen0.3: <STMicroelectronics> at usbus0 ugen6.3: <Topre Corporation> at usbus6 ukbd0: <Topre Corporation HHKB Professional, class 0/0, rev 1.10/1.02, addr 3> on usbus6 kbd2 at ukbd0 Trying to mount root from ufs:/dev/ada0s1a [rw]... WARNING: / was not properly dismounted IP Filter: v4.1.28 initialized. Default = pass all, Logging = enabled wlan0: Ethernet address: 00:1d:e0:48:13:2f WARNING: attempt to domain_add(bluetooth) after domainfinalize() WARNING: attempt to domain_add(netgraph) after domainfinalize()
Can you still reproduce this on 10.1 or stable/10?
For bugs matching the following conditions: - Status == In Progress - Assignee == "bugs@FreeBSD.org" - Last Modified Year <= 2017 Do - Set Status to "Open"