Error messages: pci21: failed to set ACPI power state D2 on \\_SB_.PCI0.PCI1.CDBS: AE_BAD_PARAMETER pci0: failed to set ACPI power state D2 on \\_SB_.PCI0.EXP0: AE_BAD_PARAMETER pci0: failed to set ACPI power state D2 on \\_SB_.PCI0.EXP1: AE_BAD_PARAMETER pci0: failed to set ACPI power state D2 on \\_SB_.PCI0.EXP2: AE_BAD_PARAMETER $ dmesg Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.1-RC2 #0 r241133: Tue Oct 2 17:11:45 UTC 2012 root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 CPU: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz (1862.04-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6fd Family = 6 Model = f Stepping = 13 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 2147483648 (2048 MB) avail memory = 2076921856 (1980 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <LENOVO TP-7P > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20110527/tbfadt-556) ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20110527/tbfadt-586) ioapic0: Changing APIC ID to 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ctl: CAM Target Layer loaded acpi0: <LENOVO TP-7P> on motherboard CPU0: local APIC error 0x40 acpi_ec0: <Embedded Controller: GPE 0x12, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7ff00000 (3) failed cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf8100000-0xf81fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 agp0: <Intel GM965 SVGA controller> on vgapci0 agp0: aperture size is 256M, detected 7676k stolen memory vgapci1: <VGA-compatible display> mem 0xf8200000-0xf82fffff at device 2.1 on pci0 uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x1820-0x183f irq 20 at device 26.0 on pci0 uhci0: LegSup = 0x3000 usbus0 on uhci0 uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x1840-0x185f irq 21 at device 26.1 on pci0 usbus1 on uhci1 ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfe304800-0xfe304bff irq 22 at device 26.7 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci0 hdac0: <Intel 82801H HDA Controller> mem 0xfe100000-0xfe103fff irq 17 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0 pci3: <ACPI PCI bus> on pcib2 wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xdfcff000-0xdfcfffff irq 17 at device 0.0 on pci3 pcib3: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0 pci4: <ACPI PCI bus> on pcib3 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller , ASIC rev. 0x00b002> mem 0xfe000000-0xfe00ffff irq 18 at device 0.0 on pci4 bge0: CHIP ID 0x0000b002; ASIC REV 0x0b; CHIP REV 0xb0; PCI-E miibus0: <MII bus> on bge0 brgphy0: <BCM5754/5787 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: 00:1c:25:91:8f:0a uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x1860-0x187f irq 16 at device 29.0 on pci0 usbus3 on uhci2 uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x1880-0x189f irq 17 at device 29.1 on pci0 usbus4 on uhci3 uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x18a0-0x18bf irq 18 at device 29.2 on pci0 usbus5 on uhci4 ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfe304c00-0xfe304fff irq 19 at device 29.7 on pci0 usbus6: EHCI version 1.0 usbus6 on ehci1 pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci21: <ACPI PCI bus> on pcib4 cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xf8300000-0xf8300fff irq 16 at device 0.0 on pci21 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ahci0: <Intel ICH8M AHCI SATA controller> port 0x1c00-0x1c07,0x18d4-0x18d7,0x18d8-0x18df,0x18d0-0x18d3,0x18e0-0x18ff mem 0xfe304000-0xfe3047ff irq 16 at device 31.2 on pci0 ahci0: AHCI v1.10 with 3 1.5Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> flags 0x2000 irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xeffff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 Timecounters tick every 1.000 msec hdacc0: <Conexant CX20549 (Venice) HDA CODEC> at cad 0 on hdac0 hdaa0: <Conexant CX20549 (Venice) Audio Function Group> at nid 1 on hdacc0 pcm0: <Conexant CX20549 (Venice) (Analog 2.0+HP/2.0)> at nid 16,17 and 20 on hdaa0 unknown: <Conexant CX20549 (Venice) HDA CODEC Modem Function Group> at nid 2 on hdacc0 (no driver attached) usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub2: 4 ports with 4 removable, self powered uhub6: 6 ports with 6 removable, self powered ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 ada0: <WDC WD1600BEVS-08RST2 11.01G11> ATA-7 SATA 1.x device ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 cd0 at ata0 bus 0 scbus0 target 0 lun 0 cd0: <HL-DT-ST RW/DVD GCC-4244N 1.02> Removable CD-ROM SCSI-0 device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present SMP: AP CPU #1 Launched! ugen0.2: <Broadcom Corp> at usbus0 Trying to mount root from ufs:/dev/ada0s2a [rw]... ugen3.2: <Genius> at usbus3 ums0: <Genius Optical Mouse, class 0/0, rev 1.10/1.00, addr 2> on usbus3 ums0: 3 buttons and [XYZ] coordinates ID=0 ubt0: <Broadcom Corp BCM2045B, class 224/1, rev 2.00/1.00, addr 2> on usbus0 WARNING: attempt to domain_add(bluetooth) after domainfinalize() WARNING: attempt to domain_add(netgraph) after domainfinalize() ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled drm0: <Intel i965GM> on vgapci0 info: [drm] MSI enabled 1 message(s) info: [drm] AGP at 0xe0000000 256MB info: [drm] Initialized i915 1.6.0 20080730 uhub0: at usbus0, port 1, addr 1 (disconnected) ugen0.2: <Broadcom Corp> at usbus0 (disconnected) ubt0: at uhub0, port 1, addr 2 (disconnected) uhub1: at usbus1, port 1, addr 1 (disconnected) uhci_interrupt: resume detect uhub2: at usbus2, port 1, addr 1 (disconnected) uhub3: at usbus3, port 1, addr 1 (disconnected) ugen3.2: <Genius> at usbus3 (disconnected) ums0: at uhub3, port 1, addr 2 (disconnected) uhub4: at usbus4, port 1, addr 1 (disconnected) uhub5: at usbus5, port 1, addr 1 (disconnected) uhub6: at usbus6, port 1, addr 1 (disconnected) pci21: failed to set ACPI power state D2 on \\_SB_.PCI0.PCI1.CDBS: AE_BAD_PARAMETER pci0: failed to set ACPI power state D2 on \\_SB_.PCI0.EXP0: AE_BAD_PARAMETER pci0: failed to set ACPI power state D2 on \\_SB_.PCI0.EXP1: AE_BAD_PARAMETER pci0: failed to set ACPI power state D2 on \\_SB_.PCI0.EXP2: AE_BAD_PARAMETER uhci_interrupt: resume detect bge0: link state changed to DOWN wakeup from sleeping state (slept 00:00:38) uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered bge0: link state changed to UP uhub0: 4 ports with 4 removable, self powered uhub1: 6 ports with 6 removable, self powered ugen3.2: <Genius> at usbus3 ums0: <Genius Optical Mouse, class 0/0, rev 1.10/1.00, addr 2> on usbus3 ums0: 3 buttons and [XYZ] coordinates ID=0 ugen0.2: <Broadcom Corp> at usbus0 ubt0: <Broadcom Corp BCM2045B, class 224/1, rev 2.00/1.00, addr 2> on usbus0 $ pciconf -lv hostb0@pci0:0:0:0: class=0x060000 card=0x20b317aa chip=0x2a008086 rev=0x0c hdr=0x00 vendor = 'Intel Corporation' device = 'Mobile PM965/GM965/GL960 Memory Controller Hub' class = bridge subclass = HOST-PCI vgapci0@pci0:0:2:0: class=0x030000 card=0x20b517aa chip=0x2a028086 rev=0x0c hdr=0x00 vendor = 'Intel Corporation' device = 'Mobile GM965/GL960 Integrated Graphics Controller (primary)' class = display subclass = VGA vgapci1@pci0:0:2:1: class=0x038000 card=0x20b517aa chip=0x2a038086 rev=0x0c hdr=0x00 vendor = 'Intel Corporation' device = 'Mobile GM965/GL960 Integrated Graphics Controller (secondary)' class = display uhci0@pci0:0:26:0: class=0x0c0300 card=0x20aa17aa chip=0x28348086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801H (ICH8 Family) USB UHCI Controller' class = serial bus subclass = USB uhci1@pci0:0:26:1: class=0x0c0300 card=0x20aa17aa chip=0x28358086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801H (ICH8 Family) USB UHCI Controller' class = serial bus subclass = USB ehci0@pci0:0:26:7: class=0x0c0320 card=0x20ab17aa chip=0x283a8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801H (ICH8 Family) USB2 EHCI Controller' class = serial bus subclass = USB hdac0@pci0:0:27:0: class=0x040300 card=0x20ac17aa chip=0x284b8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801H (ICH8 Family) HD Audio Controller' class = multimedia subclass = HDA pcib1@pci0:0:28:0: class=0x060400 card=0x20ad17aa chip=0x283f8086 rev=0x03 hdr=0x01 vendor = 'Intel Corporation' device = '82801H (ICH8 Family) PCI Express Port 1' class = bridge subclass = PCI-PCI pcib2@pci0:0:28:1: class=0x060400 card=0x20ad17aa chip=0x28418086 rev=0x03 hdr=0x01 vendor = 'Intel Corporation' device = '82801H (ICH8 Family) PCI Express Port 2' class = bridge subclass = PCI-PCI pcib3@pci0:0:28:2: class=0x060400 card=0x20ad17aa chip=0x28438086 rev=0x03 hdr=0x01 vendor = 'Intel Corporation' device = '82801H (ICH8 Family) PCI Express Port 3' class = bridge subclass = PCI-PCI uhci2@pci0:0:29:0: class=0x0c0300 card=0x20aa17aa chip=0x28308086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801H (ICH8 Family) USB UHCI Controller' class = serial bus subclass = USB uhci3@pci0:0:29:1: class=0x0c0300 card=0x20aa17aa chip=0x28318086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801H (ICH8 Family) USB UHCI Controller' class = serial bus subclass = USB uhci4@pci0:0:29:2: class=0x0c0300 card=0x20aa17aa chip=0x28328086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801H (ICH8 Family) USB UHCI Controller' class = serial bus subclass = USB ehci1@pci0:0:29:7: class=0x0c0320 card=0x20ab17aa chip=0x28368086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801H (ICH8 Family) USB2 EHCI Controller' class = serial bus subclass = USB pcib4@pci0:0:30:0: class=0x060401 card=0x20ae17aa chip=0x24488086 rev=0xf3 hdr=0x01 vendor = 'Intel Corporation' device = '82801 Mobile PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:0:31:0: class=0x060100 card=0x20a517aa chip=0x28158086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801HEM (ICH8M) LPC Interface Controller' class = bridge subclass = PCI-ISA atapci0@pci0:0:31:1: class=0x01018a card=0x20a617aa chip=0x28508086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller' class = mass storage subclass = ATA ahci0@pci0:0:31:2: class=0x010601 card=0x20a717aa chip=0x28298086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller' class = mass storage subclass = SATA none0@pci0:0:31:3: class=0x0c0500 card=0x20a917aa chip=0x283e8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801H (ICH8 Family) SMBus Controller' class = serial bus subclass = SMBus wpi0@pci0:3:0:0: class=0x028000 card=0x10118086 chip=0x42278086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = 'PRO/Wireless 3945ABG [Golan] Network Connection' class = network bge0@pci0:4:0:0: class=0x020000 card=0x20d517aa chip=0x169314e4 rev=0x02 hdr=0x00 vendor = 'Broadcom Corporation' device = 'NetLink BCM5787M Gigabit Ethernet PCI Express' class = network subclass = ethernet cbb0@pci0:21:0:0: class=0x060700 card=0x20c417aa chip=0x04761180 rev=0xb6 hdr=0x02 vendor = 'Ricoh Co Ltd' device = 'RL5c476 II' class = bridge subclass = PCI-CardBus How-To-Repeat: Suspend. Resume.
These messages were not an issue in themselves, but accompanied a potential problem affecting some systems suffering loss of USB ports on resume, which was fixed (r267647) weeks before 9.3-RELEASE. Please try with that or later.
The incorrect Dx messages were due to a separate bug from the power resource one mentioned above. These messages were fixed in HEAD in 274386.