During the upgrade process from 9.0 to 9.1 (I fetched new sources via svn) after booting the new kernel the system stops booting with error above. Booting kernel.old (9.0) is still fine. The machine is virtual on ESXi 5.1. I found a post[0] related to NAS4Free that might describe a similiar error but before trying that I'd like to ask what information or further steps are required. Thanks, Helmut N.B.: freebsd-update failed with "cannot open files/.gz: No such file or directory" so I compiled the kernel myself which I did many times before in the past. [0] http://forums.nas4free.org/viewtopic.php?f=16&t=1020 [helmut@BSDHelmut ~]$ dmesg -a Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-RELEASE-p5 #20 r244958M: Wed Jan 2 17:29:17 CET 2013 root@BSDHelmut.charlieroot.de:/usr/obj/usr/src/sys/GENERIC-QUOTA-PF-ALTQ amd64 CPU: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz (2500.09-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x10676 Family = 6 Model = 17 Stepping = 6 Features=0xfa3fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,DTS,MMX,FXSR,SSE,SSE2,SS> Features2=0x80082201<SSE3,SSSE3,CX16,SSE4.1,HV> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 2147483648 (2048 MB) avail memory = 2046697472 (1951 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <PTLTD APIC > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 4 package(s) x 1 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <INTEL 440BX> on motherboard acpi0: Power Button (fixed) Timecounter "HPET" frequency 14318180 Hz quality 950 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x10c0-0x10cf at device 7.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <bridge> at device 7.3 (no driver attached) pci0: <base peripheral> at device 7.7 (no driver attached) vgapci0: <VGA-compatible display> port 0x10d0-0x10df mem 0xd8000000-0xdbffffff,0xd0800000-0xd0ffffff irq 16 at device 15.0 on pci0 pcib2: <ACPI PCI-PCI bridge> at device 17.0 on pci0 pci2: <ACPI PCI bus> on pcib2 em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port 0x2000-0x203f mem 0xd1020000-0xd103ffff,0xd1000000-0xd100ffff irq 18 at device 0.0 on pci2 em0: Memory Access and/or Bus Master bits were not set! em0: Ethernet address: 00:0c:29:94:76:2c uhci0: <UHCI (generic) USB controller> port 0x2040-0x205f irq 16 at device 2.0 on pci2 usbus0: <UHCI (generic) USB controller> on uhci0 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd1010000-0xd1010fff irq 17 at device 3.0 on pci2 usbus1: EHCI version 1.0 usbus1: <EHCI (generic) USB 2.0 controller> on ehci0 pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0 pci3: <ACPI PCI bus> on pcib3 mpt0: <LSILogic SAS/SATA Adapter> port 0x4000-0x40ff mem 0xd2410000-0xd2413fff,0xd2400000-0xd240ffff irq 18 at device 0.0 on pci3 mpt0: MPI Version=1.5.0.0 pcib4: <ACPI PCI-PCI bridge> at device 21.1 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 21.2 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 21.3 on pci0 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 21.4 on pci0 pci7: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 21.5 on pci0 pci8: <ACPI PCI bus> on pcib8 pcib9: <ACPI PCI-PCI bridge> at device 21.6 on pci0 pci9: <ACPI PCI bus> on pcib9 pcib10: <ACPI PCI-PCI bridge> at device 21.7 on pci0 pci10: <ACPI PCI bus> on pcib10 pcib11: <ACPI PCI-PCI bridge> at device 22.0 on pci0 pci11: <ACPI PCI bus> on pcib11 pcib12: <ACPI PCI-PCI bridge> at device 22.1 on pci0 pci12: <ACPI PCI bus> on pcib12 pcib13: <ACPI PCI-PCI bridge> at device 22.2 on pci0 pci13: <ACPI PCI bus> on pcib13 pcib14: <ACPI PCI-PCI bridge> at device 22.3 on pci0 pci14: <ACPI PCI bus> on pcib14 pcib15: <ACPI PCI-PCI bridge> at device 22.4 on pci0 pci15: <ACPI PCI bus> on pcib15 pcib16: <ACPI PCI-PCI bridge> at device 22.5 on pci0 pci16: <ACPI PCI bus> on pcib16 pcib17: <ACPI PCI-PCI bridge> at device 22.6 on pci0 pci17: <ACPI PCI bus> on pcib17 pcib18: <ACPI PCI-PCI bridge> at device 22.7 on pci0 pci18: <ACPI PCI bus> on pcib18 pcib19: <ACPI PCI-PCI bridge> at device 23.0 on pci0 pci19: <ACPI PCI bus> on pcib19 pcib20: <ACPI PCI-PCI bridge> at device 23.1 on pci0 pci20: <ACPI PCI bus> on pcib20 pcib21: <ACPI PCI-PCI bridge> at device 23.2 on pci0 pci21: <ACPI PCI bus> on pcib21 pcib22: <ACPI PCI-PCI bridge> at device 23.3 on pci0 pci22: <ACPI PCI bus> on pcib22 pcib23: <ACPI PCI-PCI bridge> at device 23.4 on pci0 pci23: <ACPI PCI bus> on pcib23 pcib24: <ACPI PCI-PCI bridge> at device 23.5 on pci0 pci24: <ACPI PCI bus> on pcib24 pcib25: <ACPI PCI-PCI bridge> at device 23.6 on pci0 pci25: <ACPI PCI bus> on pcib25 pcib26: <ACPI PCI-PCI bridge> at device 23.7 on pci0 pci26: <ACPI PCI bus> on pcib26 pcib27: <ACPI PCI-PCI bridge> at device 24.0 on pci0 pci27: <ACPI PCI bus> on pcib27 pcib28: <ACPI PCI-PCI bridge> at device 24.1 on pci0 pci28: <ACPI PCI bus> on pcib28 pcib29: <ACPI PCI-PCI bridge> at device 24.2 on pci0 pcib29: failed to allocate initial I/O port window: 0xf000-0xffff pci29: <ACPI PCI bus> on pcib29 pcib30: <ACPI PCI-PCI bridge> at device 24.3 on pci0 pci30: <ACPI PCI bus> on pcib30 pcib31: <ACPI PCI-PCI bridge> at device 24.4 on pci0 pci31: <ACPI PCI bus> on pcib31 pcib32: <ACPI PCI-PCI bridge> at device 24.5 on pci0 pci32: <ACPI PCI bus> on pcib32 pcib33: <ACPI PCI-PCI bridge> at device 24.6 on pci0 pci33: <ACPI PCI bus> on pcib33 pcib34: <ACPI PCI-PCI bridge> at device 24.7 on pci0 pci34: <ACPI PCI bus> on pcib34 acpi_acad0: <AC Adapter> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 acpi_throttle2: <ACPI CPU Throttling> on cpu2 acpi_throttle2: failed to attach P_CNT device_attach: acpi_throttle2 attach returned 6 acpi_throttle3: <ACPI CPU Throttling> on cpu3 acpi_throttle3: failed to attach P_CNT device_attach: acpi_throttle3 attach returned 6 Timecounters tick every 10.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 ugen0.1: <0x15ad> at usbus0 uhub0: <0x15ad UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <0x15ad> at usbus1 uhub1: <0x15ad EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub0: 2 ports with 2 removable, self powered ugen0.2: <VMware> at usbus0 uhid0: <VMware> on usbus0 ums0: <VMware> on usbus0 ums0: 16 buttons and [XYZT] coordinates ID=0 uhub1: 6 ports with 6 removable, self powered ugen0.3: <vendor 0x0e0f> at usbus0 uhub2: <VMware Virtual USB Hub> on usbus0 uhub2: 7 ports with 7 removable, self powered da0 at mpt0 bus 0 scbus2 target 0 lun 0 da0: <ATA ST380817AS 3.42> Fixed Direct Access SCSI-5 device da0: 300.000MB/s transfers da0: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C) da1 at mpt0 bus 0 scbus2 target 1 lun 0 da1: <ATA ST380817AS 3.42> Fixed Direct Access SCSI-5 device da1: 300.000MB/s transfers da1: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C) ################################# ######## This is where 9.1 halts. ################################# cd0 at ata1 bus 0 scbus1 target 0 lun 0 cd0: <NECVMWar VMware IDE CDR10 1.00> Removable CD-ROM SCSI-0 device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! GEOM_MIRROR: Device mirror/gm0 launched (2/2). Trying to mount root from ufs:/dev/mirror/gm0p2 [rw]... Setting hostuuid: 564d9fa5-3d8a-0076-a894-6b8b0f4c8654. Setting hostid: 0x70173553. Entropy harvesting: interrupts ethernet point_to_point kickstart. Starting file system checks: /dev/mirror/gm0p2: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mirror/gm0p2: clean, 276610 free (1106 frags, 34438 blocks, 0.1% fragmentation) /dev/mirror/gm0p15: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mirror/gm0p15: clean, 1706896 free (2376 frags, 213065 blocks, 0.1% fragmentation) /dev/mirror/gm0p14: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mirror/gm0p14: clean, 1013005 free (61 frags, 126618 blocks, 0.0% fragmentation) /dev/mirror/gm0p4: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mirror/gm0p4: clean, 1170274 free (86162 frags, 135514 blocks, 1.7% fragmentation) /dev/mirror/gm0p5: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mirror/gm0p5: clean, 339791 free (6087 frags, 41713 blocks, 0.6% fragmentation) /dev/mirror/gm0p7: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mirror/gm0p7: clean, 100829 free (61 frags, 12596 blocks, 0.0% fragmentation) /dev/mirror/gm0p12: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mirror/gm0p12: clean, 778599 free (1383 frags, 97152 blocks, 0.1% fragmentation) /dev/mirror/gm0p6: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mirror/gm0p6: clean, 834727 free (199 frags, 104316 blocks, 0.0% fragmentation) /dev/mirror/gm0p9: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mirror/gm0p9: clean, 993315 free (123 frags, 124149 blocks, 0.0% fragmentation) /dev/mirror/gm0p8: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mirror/gm0p8: clean, 1012401 free (81 frags, 126540 blocks, 0.0% fragmentation) /dev/mirror/gm0p10: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mirror/gm0p10: clean, 1506359 free (45575 frags, 182598 blocks, 2.2% fragmentation) /dev/mirror/gm0p13: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mirror/gm0p13: clean, 5896961 free (281 frags, 737085 blocks, 0.0% fragmentation) /dev/mirror/gm0p11: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mirror/gm0p11: clean, 2396541 free (1813 frags, 299341 blocks, 0.0% fragmentation) Mounting local file systems: WARNING: TMPFS is considered to be a highly experimental feature in FreeBSD.
Responsible Changed From-To: freebsd-bugs->freebsd-emulation Over to maintainer(s).
For bugs matching the following criteria: Status: In Progress Changed: (is less than) 2014-06-01 Reset to default assignee and clear in-progress tags. Mail being skipped
^Triage: correct assignment. Discussed with: koobs@.