Bug 176987 - [install] Unable to install FreeBSD 9.1-RELEASE on Samsung NP-Q45
Summary: [install] Unable to install FreeBSD 9.1-RELEASE on Samsung NP-Q45
Status: Open
Alias: None
Product: Base System
Classification: Unclassified
Component: i386 (show other bugs)
Version: 9.1-RELEASE
Hardware: Any Any
: Normal Affects Only Me
Assignee: freebsd-i386 mailing list
URL:
Keywords:
Depends on:
Blocks:
 
Reported: 2013-03-15 09:10 UTC by Dola Marco
Modified: 2017-12-31 22:27 UTC (History)
0 users

See Also:


Attachments

Note You need to log in before you can comment on or make changes to this bug.
Description Dola Marco 2013-03-15 09:10:01 UTC
I'm trying to install FreeBSD 9.1 on Samsung NP-Q45, but it seems to not recognize  the HD over the ICH8M SATA controller.

This is my dmesg:
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE #0 r243826: Tue Dec  4 06:55:39 UTC 2012
    root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
CPU: Intel(R) Core(TM)2 Duo CPU     T5450  @ 1.66GHz (1662.54-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fd  Family = 6  Model = f  Stepping = 13
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20000000<LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 2147483648 (2048 MB)
avail memory = 2076930048 (1980 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <INTEL  CRESTLNE>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ctl: CAM Target Layer loaded
acpi0: <SECCSD LH43STAR> on motherboard
acpi0: Power Button (fixed)
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: could not evaluate _ADR - AE_NOT_FOUND
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf0000000-0xf00fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM965 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 7676k stolen memory
vgapci1: <VGA-compatible display> mem 0xf0100000-0xf01fffff at device 2.1 on pci0
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x1820-0x183f irq 16 at device 26.0 on pci0
uhci0: LegSup = 0x3f00
usbus0 on uhci0
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x1840-0x185f irq 21 at device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xf0704000-0xf07043ff irq 18 at device 26.7 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
hdac0: <Intel 82801H HDA Controller> mem 0xf0500000-0xf0503fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xf0300000-0xf0300fff irq 16 at device 0.0 on pci2
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
mskc0: <Marvell Yukon 88E8039 Fast Ethernet> port 0x2000-0x20ff mem 0xf0200000-0xf0203fff irq 17 at device 0.0 on pci3
msk0: <Marvell Technology Group Ltd. Yukon FE Id 0xb7 Rev 0x03> on mskc0
msk0: disabling jumbo frame support
msk0: Ethernet address: 00:13:77:5d:5f:ed
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E3082 10/100 Fast Ethernet PHY> PHY 0 on miibus0
e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x1860-0x187f irq 23 at device 29.0 on pci0
uhci2: LegSup = 0x2f00
usbus3 on uhci2
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x1880-0x189f irq 19 at device 29.1 on pci0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x18a0-0x18bf irq 18 at device 29.2 on pci0
uhci4: LegSup = 0x2f00
usbus5 on uhci4
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xf0704400-0xf07047ff irq 23 at device 29.7 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci1
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib3
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xf0400000-0xf0400fff at device 9.0 on pci4
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <Ricoh R5C552> mem 0xf0401000-0xf04017ff at device 9.1 on pci4
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:f0:41:01:07:e0:66
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:f0:07:e0:66
fwe0: Ethernet address: 02:00:f0:07:e0:66
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:00:f0:41:01:07:e0:66 @ 0xfffe00000000, S400, maxrec 2048
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x14c0000
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
pci4: <base peripheral, SD host controller> at device 9.2 (no driver attached)
pci4: <base peripheral> at device 9.3 (no driver attached)
pci4: <base peripheral> at device 9.4 (no driver attached)
pci4: <base peripheral> at device 9.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18e0-0x18ef,0x18d0-0x18df at device 31.2 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xdc000-0xdffff,0xe0000-0xe17ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
firewire0: bus manager 0 
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC262 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC262 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC262 (Analog 2.0+HP/2.0)> at nid 20,21 and 25,24 on hdaa0
pcm1: <Realtek ALC262 (Rear Digital)> at nid 30 on hdaa0
hdacc1: <Lucent/Agere Systems (0x1040) HDA CODEC> at cad 1 on hdac0
unknown: <Lucent/Agere Systems (0x1040) HDA CODEC Modem Function Group> at nid 1 on hdacc1 (no driver attached)
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub2: 4 ports with 4 removable, self powered
uhub6: 6 ports with 6 removable, self powered
ugen2.2: <Vimicro Corp.> at usbus2
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <TSSTcorp CDDVDW TS-L632N SC01> Removable CD-ROM SCSI-0 device 
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: cd present [292832 x 2048 byte records]
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 12988596 Hz quality 1000
ugen5.2: <Broadcom Corp> at usbus5
Trying to mount root from cd9660:/dev/iso9660/FREEBSD_INSTALL [ro]...
ubt0: <Broadcom Corp BCM92045NMD, class 224/1, rev 2.00/3.54, addr 2> on usbus5
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
pid 1898 (autopart), uid 0: exited on signal 11
interface ata_ahci.1 already present in the KLD 'kernel'!
interface ata_intel.1 already present in the KLD 'kernel'!
ugen6.2: <ALi Corp.> at usbus6
umass0: <ALi Corp. Audio Player, class 0/0, rev 2.00/0.02, addr 2> on usbus6
umass0:  SCSI over Bulk-Only; quirks = 0x4100
umass0:3:0:-1: Attached to scbus3
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: < Audio Player \\000\\000\\000?> Removable Direct Access SCSI-0 device 
da0: 40.000MB/s transfers
da0: 3864MB (7913472 512 byte sectors: 255H 63S/T 492C)

And this the output of pciconf -lvcb
hostb0@pci0:0:0:0:	class=0x060000 card=0xc510144d chip=0x2a008086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile PM965/GM965/GL960 Memory Controller Hub'
    class      = bridge
    subclass   = HOST-PCI
    cap 09[e0] = vendor (length 10) Intel cap 9 version 1
vgapci0@pci0:0:2:0:	class=0x030000 card=0xc510144d chip=0x2a028086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile GM965/GL960 Integrated Graphics Controller (primary)'
    class      = display
    subclass   = VGA
    bar   [10] = type Memory, range 64, base rxf0000000, size 1048576, enabled
    bar   [18] = type Prefetchable Memory, range 64, base rxd0000000, size 268435456, enabled
    bar   [20] = type I/O Port, range 32, base rx1800, size  8, enabled
    cap 05[90] = MSI supports 1 message 
    cap 01[d0] = powerspec 3  supports D0 D3  current D0
vgapci1@pci0:0:2:1:	class=0x038000 card=0xc510144d chip=0x2a038086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile GM965/GL960 Integrated Graphics Controller (secondary)'
    class      = display
    bar   [10] = type Memory, range 64, base rxf0100000, size 1048576, enabled
    cap 01[d0] = powerspec 3  supports D0 D3  current D0
uhci0@pci0:0:26:0:	class=0x0c0300 card=0xc510144d chip=0x28348086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI Controller'
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base rx1820, size 32, enabled
uhci1@pci0:0:26:1:	class=0x0c0300 card=0xc510144d chip=0x28358086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI Controller'
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base rx1840, size 32, enabled
ehci0@pci0:0:26:7:	class=0x0c0320 card=0xc510144d chip=0x283a8086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB2 EHCI Controller'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base rxf0704000, size 1024, enabled
    cap 01[50] = powerspec 2  supports D0 D3  current D0
    cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
hdac0@pci0:0:27:0:	class=0x040300 card=0xc510144d chip=0x284b8086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) HD Audio Controller'
    class      = multimedia
    subclass   = HDA
    bar   [10] = type Memory, range 64, base rxf0500000, size 16384, enabled
    cap 01[50] = powerspec 2  supports D0 D3  current D0
    cap 05[60] = MSI supports 1 message, 64 bit enabled with 1 message
    cap 10[70] = PCI-Express 1 root endpoint max data 128(128) link x0(x0)
ecap 0002[100] = VC 1 max VC1
ecap 0005[130] = unknown 1
pcib1@pci0:0:28:0:	class=0x060400 card=0xc510144d chip=0x283f8086 rev=0x03 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) PCI Express Port 1'
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 1 root port max data 128(128) link x1(x1)
    cap 05[80] = MSI supports 1 message 
    cap 0d[90] = PCI Bridge card=0xc510144d
    cap 01[a0] = powerspec 2  supports D0 D3  current D0
ecap 0002[100] = VC 1 max VC0
ecap 0005[180] = unknown 1
pcib2@pci0:0:28:1:	class=0x060400 card=0xc510144d chip=0x28418086 rev=0x03 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) PCI Express Port 2'
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 1 root port max data 128(128) link x1(x1)
    cap 05[80] = MSI supports 1 message 
    cap 0d[90] = PCI Bridge card=0xc510144d
    cap 01[a0] = powerspec 2  supports D0 D3  current D0
ecap 0002[100] = VC 1 max VC0
ecap 0005[180] = unknown 1
uhci2@pci0:0:29:0:	class=0x0c0300 card=0xc510144d chip=0x28308086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI Controller'
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base rx1860, size 32, enabled
uhci3@pci0:0:29:1:	class=0x0c0300 card=0xc510144d chip=0x28318086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI Controller'
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base rx1880, size 32, enabled
uhci4@pci0:0:29:2:	class=0x0c0300 card=0xc510144d chip=0x28328086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB UHCI Controller'
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base rx18a0, size 32, enabled
ehci1@pci0:0:29:7:	class=0x0c0320 card=0xc510144d chip=0x28368086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) USB2 EHCI Controller'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base rxf0704400, size 1024, enabled
    cap 01[50] = powerspec 2  supports D0 D3  current D0
    cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
pcib3@pci0:0:30:0:	class=0x060401 card=0x00000000 chip=0x24488086 rev=0xf3 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801 Mobile PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
    cap 0d[50] = PCI Bridge card=0x00000000
isab0@pci0:0:31:0:	class=0x060100 card=0xc510144d chip=0x28158086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801HEM (ICH8M) LPC Interface Controller'
    class      = bridge
    subclass   = PCI-ISA
    cap 09[e0] = vendor (length 12) Intel cap 1 version 0
		 features: SATA RAID-5, Mobile, 4 PCI-e x1 slots, SATA RAID-0/1/10
atapci0@pci0:0:31:2:	class=0x010180 card=0xc510144d chip=0x28288086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller'
    class      = mass storage
    subclass   = ATA
    bar   [20] = type I/O Port, range 32, base rx18e0, size 16, enabled
    bar   [24] = type I/O Port, range 32, base rx18d0, size 16, enabled
    cap 01[70] = powerspec 3  supports D0 D3  current D0
none0@pci0:0:31:3:	class=0x0c0500 card=0xc510144d chip=0x283e8086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H (ICH8 Family) SMBus Controller'
    class      = serial bus
    subclass   = SMBus
    bar   [10] = type Memory, range 32, base r, size 256, enabled
    bar   [20] = type I/O Port, range 32, base rx1c00, size 32, enabled
wpi0@pci0:2:0:0:	class=0x028000 card=0x10018086 chip=0x42228086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'PRO/Wireless 3945ABG [Golan] Network Connection'
    class      = network
    bar   [10] = type Memory, range 32, base rxf0300000, size 4096, enabled
    cap 01[c8] = powerspec 2  supports D0 D3  current D0
    cap 05[d0] = MSI supports 1 message, 64 bit 
    cap 10[e0] = PCI-Express 1 legacy endpoint max data 128(128) link x1(x1)
ecap 0001[100] = AER 1 0 fatal 1 non-fatal 1 corrected
ecap 0003[140] = Serial 1 001cbfffff422f57
mskc0@pci0:3:0:0:	class=0x020000 card=0xc510144d chip=0x435311ab rev=0x15 hdr=0x00
    vendor     = 'Marvell Technology Group Ltd.'
    device     = '88E8039 PCI-E Fast Ethernet Controller'
    class      = network
    subclass   = ethernet
    bar   [10] = type Memory, range 64, base rxf0200000, size 16384, enabled
    bar   [18] = type I/O Port, range 32, base rx2000, size 256, enabled
    cap 01[48] = powerspec 2  supports D0 D1 D2 D3  current D0
    cap 03[50] = VPD
    cap 05[5c] = MSI supports 2 messages, 64 bit enabled with 1 message
    cap 10[e0] = PCI-Express 1 legacy endpoint max data 128(128) link x1(x1)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
cbb0@pci0:4:9:0:	class=0x060700 card=0xc510144d chip=0x04761180 rev=0xb4 hdr=0x02
    vendor     = 'Ricoh Co Ltd'
    device     = 'RL5c476 II'
    class      = bridge
    subclass   = PCI-CardBus
    bar   [10] = type Memory, range 32, base rxf0400000, size 4096, enabled
    cap 01[dc] = powerspec 2  supports D0 D1 D2 D3  current D0
fwohci0@pci0:4:9:1:	class=0x0c0010 card=0xc510144d chip=0x05521180 rev=0x09 hdr=0x00
    vendor     = 'Ricoh Co Ltd'
    device     = 'R5C552 IEEE 1394 Controller'
    class      = serial bus
    subclass   = FireWire
    bar   [10] = type Memory, range 32, base rxf0401000, size 2048, enabled
    cap 01[dc] = powerspec 2  supports D0 D3  current D0
none1@pci0:4:9:2:	class=0x080500 card=0xc510144d chip=0x08221180 rev=0x18 hdr=0x00
    vendor     = 'Ricoh Co Ltd'
    device     = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter'
    class      = base peripheral
    subclass   = SD host controller
    bar   [10] = type Memory, range 32, base rxf0401800, size 256, enabled
    cap 01[80] = powerspec 2  supports D0 D1 D2 D3  current D0
none2@pci0:4:9:3:	class=0x088000 card=0xc510144d chip=0x08431180 rev=0x00 hdr=0x00
    vendor     = 'Ricoh Co Ltd'
    device     = 'R5C843 MMC Host Controller'
    class      = base peripheral
    bar   [10] = type Memory, range 32, base rxf0401c00, size 256, enabled
    cap 01[80] = powerspec 2  supports D0 D1 D2 D3  current D0
none3@pci0:4:9:4:	class=0x088000 card=0xc510144d chip=0x05921180 rev=0x09 hdr=0x00
    vendor     = 'Ricoh Co Ltd'
    device     = 'R5C592 Memory Stick Bus Host Adapter'
    class      = base peripheral
    bar   [10] = type Memory, range 32, base rxf0402000, size 256, enabled
    cap 01[80] = powerspec 2  supports D0 D1 D2 D3  current D0
none4@pci0:4:9:5:	class=0x088000 card=0xc510144d chip=0x08521180 rev=0x04 hdr=0x00
    vendor     = 'Ricoh Co Ltd'
    device     = 'xD-Picture Card Controller'
    class      = base peripheral
    bar   [10] = type Memory, range 32, base rxf0402400, size 256, enabled
    cap 01[80] = powerspec 2  supports D0 D1 D2 D3  current D0

Thanks in advance
Dola Marco
Comment 1 Eitan Adler freebsd_committer freebsd_triage 2017-12-31 08:00:59 UTC
For bugs matching the following criteria:

Status: In Progress Changed: (is less than) 2014-06-01

Reset to default assignee and clear in-progress tags.

Mail being skipped