The system will not going into the s3 state. It just keep running normally after running "acpiconf -s 3".I've tried going through the steps listed in https://wiki.freebsd.org/SuspendResume. The output it requests follows. Please let me know if there is anything more I can do or provide. "sysctl hw.acpi.supported_sleep_state" hw.acpi.supported_sleep_state: S3 S4 S5 "dmesg" Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.1-RELEASE-p5 #0: Sat Jul 27 01:14:23 UTC 2013 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 CPU: Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz (3292.59-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x306a9 Family = 6 Model = 3a Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x3d9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX,F16C> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16429895680 (15668 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <INTEL S1200KPR> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ctl: CAM Target Layer loaded acpi0: <INTEL S1200KPR> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 mps0: <LSI SAS2008> port 0xe000-0xe0ff mem 0xfe5c0000-0xfe5c3fff,0xfe580000-0xfe5bffff irq 16 at device 0.0 on pci1 mps0: Firmware: 16.00.00.00, Driver: 14.00.00.01-fbsd mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc> vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xfe000000-0xfe3fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 agp0: <IvyBridge desktop GT1 IG> on vgapci0 agp0: aperture size is 256M, detected 65532k stolen memory pci0: <simple comms> at device 22.0 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xf080-0xf09f mem 0xfe600000-0xfe61ffff,0xfe624000-0xfe624fff irq 20 at device 25.0 on pci0 em0: Using an MSI interrupt em0: Ethernet address: 70:54:d2:c4:9b:5e ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe623000-0xfe6233ff irq 16 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 pci3: <ACPI PCI bus> on pcib3 em1: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xd000-0xd01f mem 0xfe400000-0xfe41ffff,0xfe420000-0xfe423fff irq 17 at device 0.0 on pci3 em1: Using MSIX interrupts with 3 vectors em1: Ethernet address: 70:54:d2:c4:9b:5f ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe622000-0xfe6223ff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci1 pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci4: <ACPI PCI bus> on pcib4 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xfe621000-0xfe6217ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: cannot reserve I/O port range coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 coretemp2: <CPU On-Die Thermal Sensors> on cpu2 est2: <Enhanced SpeedStep Frequency Control> on cpu2 coretemp3: <CPU On-Die Thermal Sensors> on cpu3 est3: <Enhanced SpeedStep Frequency Control> on cpu3 Timecounters tick every 1.000 msec usbus0: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered ugen0.2: <vendor 0x8087> at usbus0 uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen1.2: <vendor 0x8087> at usbus1 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 uhub2: 6 ports with 6 removable, self powered ada0 at ahcich3 bus 0 scbus4 target 0 lun 0 ada0: <WDC WD1600BEVS-60RST0 04.01G04> ATA-7 SATA 1.x device ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada0: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad10 SMP: AP CPU #1 Launched! da5 at mps0 bus 0 scbus0 target 15 lun 0 SMP: AP CPU #2 Launched! da5: <ATA WDC WD30EFRX-68A 0A80> Fixed Direct Access SCSI-6 device da5: 600.000MB/s transfers da5: Command Queueing enabled da5: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C) da3 at mps0 bus 0 scbus0 target 12 lun 0 da3: <ATA WDC WD30EFRX-68A 0A80> Fixed Direct Access SCSI-6 device SMP: AP CPU #3 Launched! da3: 600.000MB/s transfers da3: Command Queueing enabled da3: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C) da4 at mps0 bus 0 scbus0 target 13 lun 0 da4: <ATA WDC WD30EFRX-68A 0A80> Fixed Direct Access SCSI-6 device da4: 600.000MB/s transfers da4: Command Queueing enabled da4: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C) da2 at mps0 bus 0 scbus0 target 11 lun 0 da2: <ATA WDC WD30EFRX-68A 0A80> Fixed Direct Access SCSI-6 device da2: 600.000MB/s transfers da2: Command Queueing enabled da2: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C) da1 at mps0 bus 0 scbus0 target 10 lun 0 da1: <ATA WDC WD30EFRX-68A 0A80> Fixed Direct Access SCSI-6 device da1: 600.000MB/s transfers da1: Command Queueing enabled da1: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C) da0 at mps0 bus 0 scbus0 target 9 lun 0 da0: <ATA WDC WD30EFRX-68A 0A80> Fixed Direct Access SCSI-6 device da0: 600.000MB/s transfers da0: Command Queueing enabled da0: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C) Timecounter "TSC-low" frequency 12861663 Hz quality 1000 uhub3: 8 ports with 8 removable, self powered ugen0.3: <Logitech> at usbus0 ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3> on usbus0 kbd2 at ukbd0 ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3> on usbus0 ums0: 16 buttons and [XYZT] coordinates ID=2 uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3> on usbus0 Trying to mount root from ufs:/dev/ada0p2 [rw]... ZFS filesystem version 5 ZFS storage pool version 28 fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.19 acpi0: device_suspend failed ahcich3: Timeout on slot 26 port 0 ahcich3: is 00000000 cs 0c000000 ss 00000000 rs 0c000000 tfd d0 serr 00000000 cmd 0004da17 (ada0:ahcich3:0:0:0): READ_DMA. ACB: c8 00 9a b6 c5 4b 00 00 00 00 05 00 (ada0:ahcich3:0:0:0): CAM status: Command timeout (ada0:ahcich3:0:0:0): Retrying command acpi0: device_suspend failed ahcich3: Timeout on slot 22 port 0 ahcich3: is 00000000 cs 00c00000 ss 00000000 rs 00c00000 tfd d0 serr 00000000 cmd 0004d617 (ada0:ahcich3:0:0:0): READ_DMA. ACB: c8 00 62 59 c6 4b 00 00 00 00 40 00 (ada0:ahcich3:0:0:0): CAM status: Command timeout (ada0:ahcich3:0:0:0): Retrying command "devinfo -rv" nexus0 apic0 ram0 I/O memory addresses: 0x0-0x9d7ff 0x100000-0x1fffffff 0x20200000-0x3fffffff 0x40200000-0xda96cfff 0xdabd8000-0xdabd8fff 0xdae8e000-0xdaffffff 0x100000000-0x41f5fffff acpi0 Interrupt request lines: 9 I/O ports: 0x10-0x1f 0x22-0x3f 0x44-0x5f 0x62-0x63 0x65-0x6f 0x72-0x7f 0x80 0x84-0x86 0x88 0x8c-0x8e 0x90-0x9f 0xa2-0xbf 0xe0-0xef 0x290-0x29f 0x400-0x453 0x454-0x457 0x458-0x47f 0x4d0-0x4d1 0x500-0x57f 0x1180-0x119f I/O memory addresses: 0xf8000000-0xfbffffff 0xfec00000-0xfecfffff 0xfed08000-0xfed08fff 0xfed10000-0xfed19fff 0xfed1c000-0xfed1ffff 0xfed20000-0xfed3ffff 0xfed90000-0xfed93fff 0xfee00000-0xfee0ffff 0xff000000-0xffffffff pcib0 pnpinfo _HID=PNP0A08 _UID=0 at handle=\_SB_.PCI0 I/O ports: 0xcf8-0xcff pci0 hostb0 pnpinfo vendor=0x8086 device=0x0150 subvendor=0x8086 subdevice=0x202d class=0x060000 at slot=0 function=0 pcib1 pnpinfo vendor=0x8086 device=0x0151 subvendor=0x8086 subdevice=0x202d class=0x060400 at slot=1 function=0 handle=\_SB_.PCI0.P0P1 I/O ports: 0xe000-0xefff I/O memory addresses: 0xfe500000-0xfe5fffff pci1 mps0 pnpinfo vendor=0x1000 device=0x0072 subvendor=0x1000 subdevice=0x3020 class=0x010700 at slot=0 function=0 Interrupt request lines: 264 pcib1 I/O port window: 0xe000-0xe0ff pcib1 memory window: 0xfe580000-0xfe5bffff 0xfe5c0000-0xfe5c3fff vgapci0 pnpinfo vendor=0x8086 device=0x0152 subvendor=0x8086 subdevice=0x202d class=0x030000 at slot=2 function=0 handle=\_SB_.PCI0.GFX0 I/O ports: 0xf000-0xf03f I/O memory addresses: 0xe0000000-0xefffffff 0xfe000000-0xfe3fffff agp0 drm0 drmn0 unknown pnpinfo vendor=0x8086 device=0x1c3a subvendor=0x8086 subdevice=0x202d class=0x078000 at slot=22 function=0 I/O memory addresses: 0xfe625000-0xfe62500f em0 pnpinfo vendor=0x8086 device=0x1502 subvendor=0x8086 subdevice=0x202d class=0x020000 at slot=25 function=0 handle=\_SB_.PCI0.GBE_ Interrupt request lines: 265 I/O ports: 0xf080-0xf09f I/O memory addresses: 0xfe600000-0xfe61ffff 0xfe624000-0xfe624fff ehci0 pnpinfo vendor=0x8086 device=0x1c2d subvendor=0x8086 subdevice=0x202d class=0x0c0320 at slot=26 function=0 handle=\_SB_.PCI0.USBE Interrupt request lines: 16 I/O memory addresses: 0xfe623000-0xfe6233ff usbus0 uhub0 uhub2 pnpinfo vendor=0x8087 product=0x0024 devclass=0x09 devsubclass=0x00 sernum="" release=0x0000 mode=host intclass=0x09 intsubclass=0x00 i at bus=1 hubaddr=1 port=0 devaddr=2 interface=0 ukbd0 pnpinfo vendor=0x046d product=0xc52b devclass=0x00 devsubclass=0x00 sernum="" release=0x1201 mode=host intclass=0x03 intsubclass=0x01 i at bus=2 hubaddr=3 port=0 devaddr=3 interface=0 ums0 pnpinfo vendor=0x046d product=0xc52b devclass=0x00 devsubclass=0x00 sernum="" release=0x1201 mode=host intclass=0x03 intsubclass=0x01 i at bus=2 hubaddr=3 port=0 devaddr=3 interface=1 uhid0 pnpinfo vendor=0x046d product=0xc52b devclass=0x00 devsubclass=0x00 sernum="" release=0x1201 mode=host intclass=0x03 intsubclass=0x00 i at bus=2 hubaddr=3 port=0 devaddr=3 interface=2 pcib2 pnpinfo vendor=0x8086 device=0x1c10 subvendor=0x8086 subdevice=0x202d class=0x060400 at slot=28 function=0 handle=\_SB_.PCI0.PEX0 pci2 pcib3 pnpinfo vendor=0x8086 device=0x1c12 subvendor=0x8086 subdevice=0x202d class=0x060400 at slot=28 function=1 handle=\_SB_.PCI0.PEX1 I/O ports: 0xd000-0xdfff I/O memory addresses: 0xfe400000-0xfe4fffff pci3 em1 pnpinfo vendor=0x8086 device=0x10d3 subvendor=0x8086 subdevice=0x202d class=0x020000 at slot=0 function=0 Interrupt request lines: 266 267 268 pcib3 I/O port window: 0xd000-0xd01f pcib3 memory window: 0xfe400000-0xfe41ffff 0xfe420000-0xfe423fff ehci1 pnpinfo vendor=0x8086 device=0x1c26 subvendor=0x8086 subdevice=0x202d class=0x0c0320 at slot=29 function=0 handle=\_SB_.PCI0.EUSB Interrupt request lines: 23 I/O memory addresses: 0xfe622000-0xfe6223ff usbus1 uhub1 uhub3 pnpinfo vendor=0x8087 product=0x0024 devclass=0x09 devsubclass=0x00 sernum="" release=0x0000 mode=host intclass=0x09 intsubclass=0x00 i at bus=1 hubaddr=1 port=1 devaddr=2 interface=0 pcib4 pnpinfo vendor=0x8086 device=0x244e subvendor=0x8086 subdevice=0x202d class=0x060401 at slot=30 function=0 handle=\_SB_.PCI0.BR20 pci4 isab0 pnpinfo vendor=0x8086 device=0x1c56 subvendor=0x8086 subdevice=0x202d class=0x060100 at slot=31 function=0 handle=\_SB_.PCI0.SBRG isa0 sc0 vga0 I/O ports: 0x3c0-0x3df I/O memory addresses: 0xa0000-0xbffff atkbdc0 I/O ports: 0x60 0x64 atkbd0 Interrupt request lines: 1 psm0 fdc0 ppc0 uart0 uart1 wbwd0 ahci0 pnpinfo vendor=0x8086 device=0x1c02 subvendor=0x8086 subdevice=0x202d class=0x010601 at slot=31 function=2 handle=\_SB_.PCI0.SAT0 Interrupt request lines: 269 I/O ports: 0xf060-0xf07f 0xf0a0-0xf0a3 0xf0b0-0xf0b7 0xf0c0-0xf0c3 0xf0d0-0xf0d7 I/O memory addresses: 0xfe621000-0xfe6217ff ahcich0 at channel=0 I/O memory addresses: 0xfe621100-0xfe62117f ahcich1 at channel=1 I/O memory addresses: 0xfe621180-0xfe6211ff ahcich2 at channel=2 I/O memory addresses: 0xfe621200-0xfe62127f ahcich3 at channel=3 I/O memory addresses: 0xfe621280-0xfe6212ff ahcich4 at channel=4 ahcich5 at channel=5 unknown pnpinfo vendor=0x8086 device=0x1c22 subvendor=0x8086 subdevice=0x202d class=0x0c0500 at slot=31 function=3 handle=\_SB_.PCI0.SMB_ I/O ports: 0xf040-0xf05f I/O memory addresses: 0xfe620000-0xfe6200ff acpi_sysresource0 pnpinfo _HID=PNP0C01 _UID=10 at handle=\_SB_.PCI0.MCH_ acpi_sysresource1 pnpinfo _HID=PNP0C02 _UID=46 at handle=\_SB_.PCI0.SBRG.SIO1 unknown pnpinfo _HID=PNP0303 _UID=0 at handle=\_SB_.PCI0.SBRG.PS2K unknown pnpinfo _HID=PNP0F03 _UID=0 at handle=\_SB_.PCI0.SBRG.PS2M unknown pnpinfo _HID=PNP0700 _UID=0 at handle=\_SB_.PCI0.SBRG.FDC_ unknown pnpinfo _HID=PNP0501 _UID=1 at handle=\_SB_.PCI0.SBRG.UAR1 unknown pnpinfo _HID=PNP0401 _UID=0 at handle=\_SB_.PCI0.SBRG.LPTE unknown pnpinfo _HID=NTN0530 _UID=0 at handle=\_SB_.PCI0.SBRG.CIR_ unknown pnpinfo _HID=PNP0000 _UID=0 at handle=\_SB_.PCI0.SBRG.PIC_ I/O ports: 0x20-0x21 0xa0-0xa1 atdma0 pnpinfo _HID=PNP0200 _UID=0 at handle=\_SB_.PCI0.SBRG.DMAD DMA request lines: 4 I/O ports: 0x0-0xf 0x81-0x83 0x87 0x89-0x8b 0x8f 0xc0-0xdf attimer0 pnpinfo _HID=PNP0100 _UID=0 at handle=\_SB_.PCI0.SBRG.TMR_ Interrupt request lines: 0 I/O ports: 0x40-0x43 atrtc0 pnpinfo _HID=PNP0B00 _UID=0 at handle=\_SB_.PCI0.SBRG.RTC0 Interrupt request lines: 8 I/O ports: 0x70-0x71 unknown pnpinfo _HID=PNP0800 _UID=0 at handle=\_SB_.PCI0.SBRG.SPKR I/O ports: 0x61 acpi_sysresource2 pnpinfo _HID=PNP0C02 _UID=16 at handle=\_SB_.PCI0.SBRG.RMSC fpupnp0 pnpinfo _HID=PNP0C04 _UID=0 at handle=\_SB_.PCI0.SBRG.COPR I/O ports: 0xf0-0xff acpi_sysresource3 pnpinfo _HID=PNP0C01 _UID=455 at handle=\_SB_.PCI0.PCH_ acpi_sysresource4 pnpinfo _HID=INT3F0D _UID=0 at handle=\_SB_.PCI0.CWDT hpet0 pnpinfo _HID=PNP0103 _UID=0 at handle=\_SB_.PCI0.HPET Interrupt request lines: 256 257 258 259 260 261 262 263 I/O memory addresses: 0xfed00000-0xfed003ff unknown pnpinfo _HID=PNP0C0E _UID=0 at handle=\_SB_.SLPB acpi_button0 pnpinfo _HID=PNP0C0C _UID=170 at handle=\_SB_.PWRB pci_link0 pnpinfo _HID=PNP0C0F _UID=1 at handle=\_SB_.LNKA pci_link1 pnpinfo _HID=PNP0C0F _UID=2 at handle=\_SB_.LNKB pci_link2 pnpinfo _HID=PNP0C0F _UID=3 at handle=\_SB_.LNKC pci_link3 pnpinfo _HID=PNP0C0F _UID=4 at handle=\_SB_.LNKD pci_link4 pnpinfo _HID=PNP0C0F _UID=5 at handle=\_SB_.LNKE pci_link5 pnpinfo _HID=PNP0C0F _UID=6 at handle=\_SB_.LNKF pci_link6 pnpinfo _HID=PNP0C0F _UID=7 at handle=\_SB_.LNKG pci_link7 pnpinfo _HID=PNP0C0F _UID=8 at handle=\_SB_.LNKH acpi_sysresource5 pnpinfo _HID=PNP0C01 _UID=1 at handle=\_SB_.RMEM cpu0 pnpinfo _HID=none _UID=0 at handle=\_SB_.P000 ACPI I/O ports: 0x414 0x415 acpi_throttle0 acpi_perf0 est0 p4tcc0 coretemp0 cpufreq0 cpu1 pnpinfo _HID=none _UID=0 at handle=\_SB_.P001 ACPI I/O ports: 0x414 0x415 acpi_throttle1 acpi_perf1 est1 p4tcc1 coretemp1 cpufreq1 cpu2 pnpinfo _HID=none _UID=0 at handle=\_SB_.P002 ACPI I/O ports: 0x414 0x415 acpi_throttle2 acpi_perf2 est2 p4tcc2 coretemp2 cpufreq2 cpu3 pnpinfo _HID=none _UID=0 at handle=\_SB_.P003 ACPI I/O ports: 0x414 0x415 acpi_throttle3 acpi_perf3 est3 p4tcc3 coretemp3 cpufreq3 acpi_sysresource6 pnpinfo _HID=PNP0C02 _UID=3601 at handle=\OMSC acpi_timer0 pnpinfo unknown at unknown ACPI I/O ports: 0x408-0x40b "pciconf -clv" hostb0@pci0:0:0:0: class=0x060000 card=0x202d8086 chip=0x01508086 rev=0x09 hdr=0x00 vendor = 'Intel Corporation' device = 'Ivy Bridge DRAM Controller' class = bridge subclass = HOST-PCI cap 09[e0] = vendor (length 12) Intel cap 0 version 1 pcib1@pci0:0:1:0: class=0x060400 card=0x202d8086 chip=0x01518086 rev=0x09 hdr=0x01 vendor = 'Intel Corporation' device = 'Ivy Bridge PCI Express Root Port' class = bridge subclass = PCI-PCI cap 0d[88] = PCI Bridge card=0x202d8086 cap 01[80] = powerspec 3 supports D0 D3 current D0 cap 05[90] = MSI supports 1 message cap 10[a0] = PCI-Express 2 root port max data 256(256) link x8(x16) ecap 0002[100] = VC 1 max VC0 ecap 0005[140] = unknown 1 vgapci0@pci0:0:2:0: class=0x030000 card=0x202d8086 chip=0x01528086 rev=0x09 hdr=0x00 vendor = 'Intel Corporation' device = 'Ivy Bridge Graphics Controller' class = display subclass = VGA cap 05[90] = MSI supports 1 message cap 01[d0] = powerspec 2 supports D0 D3 current D0 cap 13[a4] = PCI Advanced Features: FLR TP none0@pci0:0:22:0: class=0x078000 card=0x202d8086 chip=0x1c3a8086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = '6 Series/C200 Series Chipset Family MEI Controller' class = simple comms cap 01[50] = powerspec 3 supports D0 D3 current D0 cap 05[8c] = MSI supports 1 message, 64 bit em0@pci0:0:25:0: class=0x020000 card=0x202d8086 chip=0x15028086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = '82579LM Gigabit Network Connection' class = network subclass = ethernet cap 01[c8] = powerspec 2 supports D0 D3 current D0 cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message cap 13[e0] = PCI Advanced Features: FLR TP ehci0@pci0:0:26:0: class=0x0c0320 card=0x202d8086 chip=0x1c2d8086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = '6 Series/C200 Series Chipset Family USB Enhanced Host Controller' class = serial bus subclass = USB cap 01[50] = powerspec 2 supports D0 D3 current D0 cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14 cap 13[98] = PCI Advanced Features: FLR TP pcib2@pci0:0:28:0: class=0x060400 card=0x202d8086 chip=0x1c108086 rev=0xb5 hdr=0x01 vendor = 'Intel Corporation' device = '6 Series/C200 Series Chipset Family PCI Express Root Port 1' class = bridge subclass = PCI-PCI cap 10[40] = PCI-Express 2 root port max data 128(128) link x0(x1) cap 05[80] = MSI supports 1 message cap 0d[90] = PCI Bridge card=0x202d8086 cap 01[a0] = powerspec 2 supports D0 D3 current D0 pcib3@pci0:0:28:1: class=0x060400 card=0x202d8086 chip=0x1c128086 rev=0xb5 hdr=0x01 vendor = 'Intel Corporation' device = '6 Series/C200 Series Chipset Family PCI Express Root Port 2' class = bridge subclass = PCI-PCI cap 10[40] = PCI-Express 2 root port max data 128(128) link x1(x1) cap 05[80] = MSI supports 1 message cap 0d[90] = PCI Bridge card=0x202d8086 cap 01[a0] = powerspec 2 supports D0 D3 current D0 ehci1@pci0:0:29:0: class=0x0c0320 card=0x202d8086 chip=0x1c268086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = '6 Series/C200 Series Chipset Family USB Enhanced Host Controller' class = serial bus subclass = USB cap 01[50] = powerspec 2 supports D0 D3 current D0 cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14 cap 13[98] = PCI Advanced Features: FLR TP pcib4@pci0:0:30:0: class=0x060401 card=0x202d8086 chip=0x244e8086 rev=0xa5 hdr=0x01 vendor = 'Intel Corporation' device = '82801 PCI Bridge' class = bridge subclass = PCI-PCI cap 0d[50] = PCI Bridge card=0x202d8086 isab0@pci0:0:31:0: class=0x060100 card=0x202d8086 chip=0x1c568086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = 'C206 Chipset Family LPC Controller' class = bridge subclass = PCI-ISA cap 09[e0] = vendor (length 12) Intel cap 1 version 0 features: AMT, 4 PCI-e x1 slots ahci0@pci0:0:31:2: class=0x010601 card=0x202d8086 chip=0x1c028086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = '6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller' class = mass storage subclass = SATA cap 05[80] = MSI supports 1 message enabled with 1 message cap 01[70] = powerspec 3 supports D0 D3 current D0 cap 12[a8] = SATA Index-Data Pair cap 13[b0] = PCI Advanced Features: FLR TP none1@pci0:0:31:3: class=0x0c0500 card=0x202d8086 chip=0x1c228086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = '6 Series/C200 Series Chipset Family SMBus Controller' class = serial bus subclass = SMBus mps0@pci0:1:0:0: class=0x010700 card=0x30201000 chip=0x00721000 rev=0x02 hdr=0x00 vendor = 'LSI Logic / Symbios Logic' device = 'SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon]' class = mass storage subclass = SAS cap 01[50] = powerspec 3 supports D0 D1 D2 D3 current D0 cap 10[68] = PCI-Express 2 endpoint max data 256(4096) link x8(x8) cap 03[d0] = VPD cap 05[a8] = MSI supports 1 message, 64 bit cap 11[c0] = MSI-X supports 15 messages in map 0x14 enabled ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected ecap 0004[138] = unknown 1 ecap 0010[150] = unknown 1 ecap 000e[190] = unknown 1 em1@pci0:3:0:0: class=0x020000 card=0x202d8086 chip=0x10d38086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '82574L Gigabit Network Connection' class = network subclass = ethernet cap 01[c8] = powerspec 2 supports D0 D3 current D0 cap 05[d0] = MSI supports 1 message, 64 bit cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1) cap 11[a0] = MSI-X supports 5 messages in map 0x1c enabled ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected ecap 0003[140] = Serial 1 7054d2ffffc49b5f How-To-Repeat: "acpiconf -s 3" never has any effect.
Responsible Changed From-To: freebsd-bugs->freebsd-acpi Over to maintainer(s).
For bugs matching the following criteria: Status: In Progress Changed: (is less than) 2014-06-01 Reset to default assignee and clear in-progress tags. Mail being skipped