Mounting from local disk...
No more network devices
Booting from Hard Disk...
ZFS: i/o error - all block copies unavailable
ZFS: can't read MOS of pool tank
gptzfsboot: failed to mount default pool tank
int=00000000 err=00000000 ef1=00010246 eip=000085f7
eax=00000001 ebx=00000000 ecx=00000000 edx=00000000
esi=00000000 edi=00000000 ebp=0008f248 esp=0008f1d8
cs=002b ds=0033 es=0033 fs=0033 gs=0033 ss=0033
cs:eip=f7 35 08 99 00 00 85 ff-74 05 89 1f 89 4f 04 89
c2 e9 c2 00 00 00 66 c7-45 ea 00 00 89 c8 c1 e8
cs:esp=00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00
00 00 00 00 00-00 00 00-00 00 00 00 00 00 00 00
This happens after doing freebsd-update fetch install and restart
last working version was FreeBSD10-RELEASE-p10 not working p12
here is a hardware spec: http://www.evernote.com/l/ASOMDRkU4WxG_5TOJGOABOyR3uDD4JHdp3Q/
Here is a forum thread:
Created attachment 163718 [details]
I recently had a similar issue on FreeBSD 10.2-STABLE #3 r290929. I have included a pic.
The pool also has a log and cache device along with a mirror vdev.
I worked around the issue by force importing elsewhere. It now boots correctly in it's original configuration and a scrub revealed no issues.
No updates had been done recently prior to this issue, in fact I was testing out some values in /boot/loader.conf and had just completed a reboot like 5 minutes before the failed. The values I added to loader.conf were bogus and are still there so I have no idea what could have caused this.
Similar issue here too. Clean load of 9.x/10.x/11-CURRENT on new ASUS MB with default factory settings boots fine on ufs, but get btx halted with root on zfs. After tweaking some BIOS settings, 10.2-RELEASE and 11-CURRENT (20151130) both successfully boot with zfs on root. After updating 10.2-RELEASE to 10.2-p7 and rebooting we are back to btx halted again and no amount of BIOS tweaking seems to help. Not sure if this is relevant but using an Avago/LSI HBA with 7x2TB drives and RAIDZ3.
firstname.lastname@example.org, can you elaborate on what you mean by "force importing elsewhere" that seems to have fixed the issue for you?