Hi I have a Tascam US-144MKII usb soundcard which is not working in Freebsd. The card doesn't light up. It's missing the drivers. I need to use the tascam for recording purposes. If it helps for any developers out there The Tascam US-144MKII is very similar to the Tascam US-122. here's the dmesg output, it let me use NVIDIA hdmi / pcm, and onboard audio, the USB audio at the very bottom only says uaudio0 / which I don't know if it's my webcam or my tascam. root@fbsd11:~ # dmesg | grep pcm pcm0: <NVIDIA (0x0012) (HDMI/DP 8ch)> at nid 5 on hdaa0 pcm1: <NVIDIA (0x0012) (HDMI/DP 8ch)> at nid 5 on hdaa1 pcm2: <NVIDIA (0x0012) (HDMI/DP 8ch)> at nid 5 on hdaa2 pcm3: <NVIDIA (0x0012) (HDMI/DP 8ch)> at nid 5 on hdaa3 pcm4: <VIA VT1708_8 (Analog)> at nid 31 and 29,36,30 on hdaa4 pcm5: <VIA VT1708_8 (Front Analog Mic)> at nid 33 on hdaa4 pcm6: <VIA VT1708_8 (Rear-panel Digital)> at nid 37 on hdaa4 pcm7: <USB audio> on uaudio0 root@fbsd11:~ # dmesg | grep TASCAM ugen4.4: <TASCAM> at usbus4 ugen4.4: <TASCAM> at usbus4 ugen4.4: <TASCAM> at usbus4 ugen4.4: <TASCAM> at usbus4 ugen4.4: <TASCAM> at usbus4
Thank you for your report Carlos. Can you include (as attachments) the following please: * /var/run/dmesg.boot output * pciconf -lv output * devinfo -v
Created attachment 173483 [details] Devinfo hope this helps
Created attachment 173484 [details] pciconf here's pciconf
Created attachment 173485 [details] dmesg.boot Thank you!
I have a creative X-fi pci card which is not working either... but my main concern is the tascam. thank you.
Can you also do: usbconfig and usbconfig -d X.Y dump_device_desc dump_curr_config_desc Where X.Y are the numbers after ugenX.Y for your device? --HPS
Created attachment 173706 [details] usbconfig
Created attachment 173707 [details] usbconfigdump
Ok, there they are
Your device is not attaching because it is using vendor specific interface class values (0xff). Does this help: usbconfig -d ugen4.2 add_quirk UQ_AU_VENDOR_CLASS Then re-plug the device. --HPS
What does add_quirk means? and Can you please give me all the details of the commands I need to run to have this working? Thank you, so far I've been using Windows..
for direct contact my email is camartinez6@gmail.com, I am also in google hangouts.
Linux driver is here: http://lxr.free-electrons.com/source/sound/usb/usx2y/us122l.c Would need to be ported to FreeBSD. Or it might be possible to extend /usr/ports/multimedia/webcamd to handle this device.
Is someone porting the GNU/Linux driver or extending webcamd?
Hi, Not as I'm aware about. --HPS