While trying to upgrade a RELENG11 box to 12.0 ALPHA5, I had to backout the change as disks off an 9420 controller no longer work. The kernel would not boot as it would hang on timeouts. The same behaviour was seen on the onboard LSI 3108 MegaRAID on a SuperMicro MB SYS-7048R-C1RT4+ dmesg snippet from zoo (the SuperMicro SYS-7048R-C1RT4+) pci1: <ACPI PCI bus> on pcib1 pci1: <dasp, performance counters> at device 8.2 (no driver attached) pci1: <dasp, performance counters> at device 9.2 (no driver attached) pci1: <dasp, performance counters> at device 11.1 (no driver attached) pci1: <dasp, performance counters> at device 11.2 (no driver attached) pci1: <dasp, performance counters> at device 16.1 (no driver attached) pci1: <dasp, performance counters> at device 16.6 (no driver attached) pci1: <dasp, performance counters> at device 18.1 (no driver attached) pci1: <dasp, performance counters> at device 18.5 (no driver attached) acpi_syscontainer0: <System Container> on acpi0 acpi_syscontainer1: <System Container> on acpi0 acpi_syscontainer2: <System Container> on acpi0 acpi_syscontainer3: <System Container> on acpi0 pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 pci2: <ACPI PCI bus> numa-domain 0 on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 26 at device 1.0 numa-domain 0 on pci2 pci3: <ACPI PCI bus> numa-domain 0 on pcib3 AVAGO MegaRAID SAS FreeBSD mrsas driver version: 06.712.04.00-fbsd mfi0: <Invader> port 0x6000-0x60ff mem 0xc7300000-0xc730ffff,0xc7200000-0xc72fffff irq 26 at device 0.0 numa-domain 0 on pci3 mfi0: Using MSI mfi0: Megaraid SAS driver Ver 4.23 mfi0: FW MaxCmds = 928, limiting to 128 mfi0: MaxCmd = 928, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c03a0 mfi0: 1309 (589112779s/0x0020/info) - Shutdown command received from host mfi0: 1310 (boot + 8s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/0809/15d9) mfi0: 1311 (boot + 8s/0x0020/info) - Firmware version 4.210.10-2910 mfi0: 1312 (boot + 10s/0x0020/info) - Package version 24.1.1-0001 mfi0: 1313 (boot + 10s/0x0020/info) - Board Revision mfi0: 1314 (boot + 33s/0x0002/info) - Inserted: PD 10(e0xfc/s6) mfi0: 1315 (boot + 33s/0x0002/info) - Inserted: PD 10(e0xfc/s6) Info: enclPd=fc, scsiType=0, portMap=00, sasAddr=4433221106000000,0000000000000000 mfi0: 1316 (boot + 33s/0x0002/info) - Inserted: PD 11(e0xfc/s7) pcib4: <ACPI PCI-PCI bridge> irq 32 at device 2.0 numa-domain 0 on pci2 mfi0: 1317 (boot + 33s/0x0002/info) - Inserted: PD 11(e0xfc/s7) Info: enclPd=fc, scsiType=0, portMap=01, sasAddr=4433221107000000,0000000000000000 mfi0: 1318 (boot + 34s/0x0002/info) - Unexpected sense: PD 10(e0xfc/s6) Path 4433221106000000, CDB: 28 00 3a 38 60 2f 00 00 01 00, Sense: 6/29/00 mfi0: 1319 (boot + 34s/0x0002/info) - Unexpected sense: PD 11(e0xfc/s7) Path 4433221107000000, CDB: 28 00 3a 38 60 2f 00 00 01 00, Spci4: <ACPI PCI bus> numa-domain 0 on pcib4 ense: 6/29/00 mfi0: 1320 (590245504s/0x0020/info) - Time established as 09/14/18 13:05:04; (37 seconds since power on) mfi0: 1321 (590245504s/0x0002/info) - Unexpected sense: PD 10(e0xfc/s6) Path 4433221106000000, CDB: 2e 00 3a 38 3d fb 00 00 01 00, Sense: 6/29/00 mfi0: 1322 (590245505s/0x0020/WARN) - Patrol Read can't be started, as PDs are either not ONLINE, or are in a VD with an active process, or are in an excluded VD nvme0: <DC P3700 SSD> mem 0xc7410000-0xc7413fff irq 32 at device 0.0 numa-domain 0 on pci4 pcib5: <ACPI PCI-PCI bridge> irq 40 at device 3.0 numa-domain 0 on pci2 pci5: <ACPI PCI bus> numa-domain 0 on pcib5 ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0x5020-0x503f mem 0xc5c00000-0xc5dfffff,0xc5e04000-0xc5e07fff irq 40 at device 0.0 numa-domain 0 on pci5 ix0: using 2048 tx descriptors and 2048 rx descriptors ix0: msix_init qsets capped at 16 ix0: pxm cpus: 10 queue msgs: 63 admincnt: 1 ix0: using 10 rx queues 10 tx queues ix0: Using MSIX interrupts with 11 vectors ix0: allocated for 10 queues ix0: allocated for 10 rx queues ix0: Ethernet address: 0c:c4:7a:1f:2f:a0 ix0: PCI Express Bus: Speed 5.0GT/s Width x8 ix0: netmap queues/slots: TX 10/2048, RX 10/2048 ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0x5000-0x501f mem 0xc5a00000-0xc5bfffff,0xc5e00000-0xc5e03fff irq 44 at device 0.1 numa-domain 0 on pci5 ix1: using 2048 tx descriptors and 2048 rx descriptors ix1: msix_init qsets capped at 16 ix1: pxm cpus: 10 queue msgs: 63 admincnt: 1 ix1: using 10 rx queues 10 tx queues ix1: Using MSIX interrupts with 11 vectors ix1: allocated for 10 queues ix1: allocated for 10 rx queues ix1: Ethernet address: 0c:c4:7a:1f:2f:a1 ix1: PCI Express Bus: Speed 5.0GT/s Width x8 ix1: netmap queues/slots: TX 10/2048, RX 10/2048 pcib6: <ACPI PCI-PCI bridge> irq 40 at device 3.2 numa-domain 0 on pci2 pci6: <ACPI PCI bus> numa-domain 0 on pcib6 ix2: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0x4020-0x403f mem 0xc5600000-0xc57fffff,0xc5804000-0xc5807fff irq 42 at device 0.0 numa-domain 0 on pci6 ix2: using 2048 tx descriptors and 2048 rx descriptors ix2: msix_init qsets capped at 16 ix2: pxm cpus: 10 queue msgs: 63 admincnt: 1 ix2: using 10 rx queues 10 tx queues ix2: Using MSIX interrupts with 11 vectors ix2: allocated for 10 queues ix2: allocated for 10 rx queues ix2: Ethernet address: 0c:c4:7a:1f:2f:a2 ix2: PCI Express Bus: Speed 5.0GT/s Width x8 ix2: netmap queues/slots: TX 10/2048, RX 10/2048 ix3: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0x4000-0x401f mem 0xc5400000-0xc55fffff,0xc5800000-0xc5803fff irq 45 at device 0.1 numa-domain 0 on pci6 ix3: using 2048 tx descriptors and 2048 rx descriptors ix3: msix_init qsets capped at 16 ix3: pxm cpus: 10 queue msgs: 63 admincnt: 1 ix3: using 10 rx queues 10 tx queues ix3: Using MSIX interrupts with 11 vectors ix3: allocated for 10 queues ix3: allocated for 10 rx queues ix3: Ethernet address: 0c:c4:7a:1f:2f:a3 ix3: PCI Express Bus: Speed 5.0GT/s Width x8 ix3: netmap queues/slots: TX 10/2048, RX 10/2048 pci2: <unknown> at device 17.0 (no driver attached) ahci0: <Intel Wellsburg AHCI SATA controller> port 0x7110-0x7117,0x7100-0x7103,0x70f0-0x70f7,0x70e0-0x70e3,0x7020-0x703f mem 0xc7538000-0xc75387ff irq 16 at device 17.4 numa-domain 0 on pci2 ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 xhci0: <Intel Wellsburg USB 3.0 controller> mem 0xc7500000-0xc750ffff irq 19 at device 20.0 numa-domain 0 on pci2 xhci0: 32 bytes context size, 64-bit DMA usbus0 numa-domain 0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci2: <simple comms> at device 22.0 (no driver attached) pci2: <simple comms> at device 22.1 (no driver attached) ehci0: <Intel Wellsburg USB 2.0 controller> mem 0xc7534000-0xc75343ff irq 18 at device 26.0 numa-domain 0 on pci2 usbus1: EHCI version 1.0 usbus1 numa-domain 0 on ehci0 usbus1: 480Mbps High Speed USB v2.0 pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci2 pci7: <ACPI PCI bus> numa-domain 0 on pcib7 pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci2 pci8: <ACPI PCI bus> numa-domain 0 on pcib8 pcib9: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8 pci9: <ACPI PCI bus> numa-domain 0 on pcib9 vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xc6000000-0xc6ffffff,0xc7000000-0xc701ffff irq 16 at device 0.0 numa-domain 0 on pci9 vgapci0: Boot video device ehci1: <Intel Wellsburg USB 2.0 controller> mem 0xc7533000-0xc75333ff irq 18 at device 29.0 numa-domain 0 on pci2 usbus2: EHCI version 1.0 usbus2 numa-domain 0 on ehci1 usbus2: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci2 isa0: <ISA bus> numa-domain 0 on isab0 ahci1: <Intel Wellsburg AHCI SATA controller> port 0x7070-0x7077,0x7060-0x7063,0x7050-0x7057,0x7040-0x7043,0x7000-0x701f mem 0xc7532000-0xc75327ff irq 16 at device 31.2 numa-domain 0 on pci2 ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich4: <AHCI channel> at channel 0 on ahci1 ahcich5: <AHCI channel> at channel 1 on ahci1 ahcich6: <AHCI channel> at channel 2 on ahci1 ahcich7: <AHCI channel> at channel 3 on ahci1 ahcich8: <AHCI channel> at channel 4 on ahci1 ahcich9: <AHCI channel> at channel 5 on ahci1 ahciem1: <AHCI enclosure management bridge> on ahci1 pcib10: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 pci10: <ACPI PCI bus> numa-domain 1 on pcib10 pcib11: <ACPI PCI-PCI bridge> irq 56 at device 2.0 numa-domain 1 on pci10 pci11: <ACPI PCI bus> numa-domain 1 on pcib11 ix4: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0xf020-0xf03f mem 0xfbc80000-0xfbcfffff,0xfbd04000-0xfbd07fff irq 56 at device 0.0 numa-domain 1 on pci11 ix4: using 2048 tx descriptors and 2048 rx descriptors ix4: msix_init qsets capped at 16 ix4: pxm cpus: 10 queue msgs: 63 admincnt: 1 ix4: using 10 rx queues 10 tx queues ix4: Using MSIX interrupts with 11 vectors ix4: allocated for 10 queues ix4: allocated for 10 rx queues ix4: Ethernet address: 00:1b:21:47:3b:24 ix4: PCI Express Bus: Speed 5.0GT/s Width x8 ix4: netmap queues/slots: TX 10/2048, RX 10/2048 ix5: <Intel(R) PRO/10GbE PCI-Express Network Driver> port 0xf000-0xf01f mem 0xfbc00000-0xfbc7ffff,0xfbd00000-0xfbd03fff irq 60 at device 0.1 numa-domain 1 on pci11 ix5: using 2048 tx descriptors and 2048 rx descriptors ix5: msix_init qsets capped at 16 ix5: pxm cpus: 10 queue msgs: 63 admincnt: 1 ix5: using 10 rx queues 10 tx queues ix5: Using MSIX interrupts with 11 vectors ix5: allocated for 10 queues ix5: allocated for 10 rx queues ix5: Ethernet address: 00:1b:21:47:3b:25 ix5: PCI Express Bus: Speed 5.0GT/s Width x8 ix5: netmap queues/slots: TX 10/2048, RX 10/2048 pcib12: <ACPI PCI-PCI bridge> irq 64 at device 3.0 numa-domain 1 on pci10 pci12: <ACPI PCI bus> numa-domain 1 on pcib12 em0: <Intel(R) PRO/1000 Network Connection> port 0xe000-0xe01f mem 0xfbec0000-0xfbedffff,0xfbe00000-0xfbe7ffff,0xfbee0000-0xfbee3fff irq 64 at device 0.0 numa-domain 1 on pci12 em0: attach_pre capping queues at 2 Current cap: 0x460b em0: using 1024 tx descriptors and 1024 rx descriptors em0: msix_init qsets capped at 2 em0: pxm cpus: 10 queue msgs: 4 admincnt: 1 em0: using 2 rx queues 2 tx queues em0: Using MSIX interrupts with 3 vectors em0: allocated for 2 tx_queues em0: allocated for 2 rx_queues em0: Ethernet address: 68:05:ca:06:ee:3e em0: netmap queues/slots: TX 2/1024, RX 2/1024 acpi_button0: <Power Button> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (115200,n,8,1) uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcf7ff,0xcf800-0xd07ff,0xd0800-0xd17ff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec ugen0.1: <0x8086 XHCI root HUB> at usbus0 ugen2.1: <Intel EHCI root HUB> at usbus2 ugen1.1: <Intel EHCI root HUB> at usbus1 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 mfid0 numa-domain 0 on mfi0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <WDC WD3003FZEX-00Z4SA0 01.01A01> ACS-2 ATA SATA 3.x device ada0: Serial Number WD-WCC137TALF5K ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 2861588MB (5860533168 512 byte sectors) ada0: quirks=0x1<4K> ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <WDC WD3003FZEX-00Z4SA0 01.01A01> ACS-2 ATA SATA 3.x device ada1: Serial Number WD-WCC134FU4DRY ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 2861588MB (5860533168 512 byte sectors) ada1: quirks=0x1<4K> ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 ada2: <WDC WD3003FZEX-00Z4SA0 01.01A01> ACS-2 ATA SATA 3.x device ada2: Serial Number WD-WCC137TALKU5 ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 2861588MB (5860533168 512 byte sectors) ada2: quirks=0x1<4K> mfid0: 476416MB (975699968 sectors) RAID volume 'SSD1' is optimal ada3 at ahcich4 bus 0 scbus5 target 0 lun 0 ada3: <WDC WD4003FZEX-00Z4SA0 01.01A01> ACS-2 ATA SATA 3.x device ada3: Serial Number WD-WCC5D2UU1U3Y ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 3815447MB (7814037168 512 byte sectors) ada3: quirks=0x1<4K> mfid1 numa-domain 0 on mfi0 mfid1: 476416MB (975699968 sectors) RAID volume 'SSD2' is optimal ada4 at ahcich5 bus 0 scbus6 target 0 lun 0 ada4: <WDC WD4003FZEX-00Z4SA0 01.01A01> ACS-2 ATA SATA 3.x device ada4: Serial Number WD-WCC5D2UU1SF9 ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada4: Command Queueing enabled ada4: 3815447MB (7814037168 512 byte sectors) ada4: quirks=0x1<4K> ada5 at ahcich6 bus 0 scbus7 target 0 lun 0 ada5: <WDC WD4003FZEX-00Z4SA0 01.01A01> ACS-2 ATA SATA 3.x device ada5: Serial Number WD-WCC5D2UU18NK ada5: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada5: Command Queueing enabled ada5: 3815447MB (7814037168 512 byte sectors) ada5: quirks=0x1<4K> ada6 at ahcich7 bus 0 scbus8 target 0 lun 0 ada6: <WDC WD4003FZEX-00Z4SA0 01.01A01> ACS-2 ATA SATA 3.x device ada6: Serial Number WD-WCC5D2UU1N29 ada6: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada6: Command Queueing enabled ada6: 3815447MB (7814037168 512 byte sectors) ada6: quirks=0x1<4K> ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ses1 at ahciem1 bus 0 scbus11 target 0 lun 0 ses1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses1: SEMB SES Device uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered nvd0: <INTEL SSDPEDMD800G4> NVMe namespace nvd0: 763097MB (1562824368 512 byte sectors) Trying to mount root from zfs:zroot/ROOT/default []... uhub0: 21 ports with 21 removable, self powered ugen1.2: <vendor 0x8087 product 0x800a> at usbus1 uhub3 numa-domain 0 on uhub2 uhub3: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1 ugen2.2: <vendor 0x8087 product 0x8002> at usbus2 uhub4 numa-domain 0 on uhub1 uhub4: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus2 uhub3: 6 ports with 6 removable, self powered uhub4: 8 ports with 8 removable, self powered ugen0.2: <vendor 0x04d9 product 0x1400> at usbus0 ukbd0 numa-domain 0 on uhub0 ukbd0: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 1> on usbus0 kbd2 at ukbd0 ugen0.3: <FTDI USB FAST SERIAL ADAPTER> at usbus0 ugen0.4: <vendor 0x0557 product 0x7000> at usbus0 uhub5 numa-domain 0 on uhub0 uhub5: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 3> on usbus0 uhub5: 4 ports with 3 removable, self powered ugen0.5: <vendor 0x0557 product 0x2419> at usbus0 ukbd1 numa-domain 0 on uhub5 ukbd1: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 4> on usbus0 kbd3 at ukbd1 mfi0: COMMAND 0xfffffe017c17aec0 TIMEOUT AFTER 54 SECONDS mfi0: COMMAND 0xfffffe017c17aec0 TIMEOUT AFTER 84 SECONDS mfi0: COMMAND 0xfffffe017c17aec0 TIMEOUT AFTER 117 SECONDS mfi0: COMMAND 0xfffffe017c17aec0 TIMEOUT AFTER 147 SECONDS mfi0: COMMAND 0xfffffe017c17aec0 TIMEOUT AFTER 177 SECONDS mfi0: COMMAND 0xfffffe017c17aec0 TIMEOUT AFTER 207 SECONDS mfi0: COMMAND 0xfffffe017c17aec0 TIMEOUT AFTER 240 SECONDS mfi0: COMMAND 0xfffffe017c17aec0 TIMEOUT AFTER 271 SECONDS mfi0: COMMAND 0xfffffe017c17aec0 TIMEOUT AFTER 301 SECONDS mfi0: COMMAND 0xfffffe017c17aec0 TIMEOUT AFTER 332 SECONDS mfi0: COMMAND 0xfffffe017c17aec0 TIMEOUT AFTER 362 SECONDS mfi0: COMMAND 0xfffffe017c17aec0 TIMEOUT AFTER 393 SECONDS vs RELENG11 pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 pcib2: _OSC returned error 0x10 pci2: <ACPI PCI bus> numa-domain 0 on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 26 at device 1.0 numa-domain 0 on pci2 pci3: <ACPI PCI bus> numa-domain 0 on pcib3 AVAGO MegaRAID SAS FreeBSD mrsas driver version: 06.712.04.00-fbsd mfi0: <Invader> port 0x6000-0x60ff mem 0xc7300000-0xc730ffff,0xc7200000-0xc72fffff irq 26 at device 0.0 numa-domain 0 on pci3 mfi0: Using MSI mfi0: Megaraid SAS driver Ver 4.23 mfi0: FW MaxCmds = 928, limiting to 128 mfi0: MaxCmd = 928, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c03a0 mfi0: 1309 (589112779s/0x0020/info) - Shutdown command received from host mfi0: 1310 (boot + 8s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/0809/15d9) mfi0: 1311 (boot + 8s/0x0020/info) - Firmware version 4.210.10-2910 mfi0: 1312 (boot + 10s/0x0020/info) - Package version 24.1.1-0001 mfi0: 1313 (boot + 10s/0x0020/info) - Board Revision mfi0: 1314 (boot + 33s/0x0002/info) - Inserted: PD 10(e0xfc/s6) mfi0: 1315 (boot + 33s/0x0002/info) - Inserted: PD 10(e0xfc/s6) Info: enclPd=fc, scsiType=0, portMap=00, sasAddr=4433221106000000,0000000000000000 mfi0: 1316 (boot + 33s/0x0002/info) - Inserted: PD 11(e0xfc/s7) mfi0: 1317 (boot + 33s/0x0002/info) - Inserted: PD 11(e0xfc/s7) Info: enclPd=fc, scsiType=0, portMap=01, sasAddr=4433221107000000,0000000000000000 mfi0: 1318 (boot + 34s/0x0002/info) - Unexpected sense: PD 10(e0xfc/s6) Path 4433221106000000, CDB: 28 00 3a 38 60 2f 00 00 01 00, Sense: 6/29/00 mfi0: pcib4: <ACPI PCI-PCI bridge> irq 32 at device 2.0 numa-domain 0 on pci2 1319 (boot + 34s/0x0002/info) - Unexpected sense: PD 11(e0xfc/s7) Path 4433221107000000, CDB: 28 00 3a 38 60 2f 00 00 01 00, Sense: 6/29/00 mfi0: 1320 (590245504s/0x0020/info) - Time established as 09/14/18 13:05:04; (37 seconds since power on) mfi0: 1321 (590245504s/0x0002/info) - Unexpected sense: PD 10(e0xfc/s6) Path 4433221106000000, CDB: 2e 00 3a 38 3d fb 00 00 01 00, Spci4: <ACPI PCI bus> numa-domain 0 on pcib4 ense: 6/29/00 mfi0: 1322 (590245505s/0x0020/WARN) - Patrol Read can't be started, as PDs are either not ONLINE, or are in a VD with an active process, or are in an excluded VD mfi0: 1323 (boot + 8s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/0809/15d9) mfi0: 1324 (boot + 8s/0x0020/info) - Firmware version 4.210.10-2910 mfi0: 1325 (boot + 11s/0x0020/info) - Package version 24.1.1-0001 mfi0: 1326 (boot + 11s/0x0020/info) - Board Revision mfi0: 1327 (boot + 33s/0x0002/info) - Inserted: PD 10(e0xfc/s6) mfi0: 1328 (boot + 33s/0x0002/info) - Inserted: PD 10(e0xfc/s6) Info: enclPd=fc, scsiType=0, portMap=00, sasAddr=4433221106000000,0000000000000000 mfi0: 1329 (boot + 33s/0x0002/info) - Inserted: PD 11(e0xfc/s7) mfi0: 1330 (boot + 33s/0x0002/info) - Inserted: PD 11(e0xfc/s7) Info: enclPd=fc, scsiType=0, portMap=01, sasAddr=4433221107000000,0000000000000000 nvme0: <DC P3700 SSD> mem 0xc7410000-0xc7413fff irq 32 at device 0.0 numa-domain 0 on pci4 mfi0: 1331 (590246103s/0x0020/info) - Time established as 09/14/18 13:15:03; (36 seconds since power on) mfi0: 1332 (590246113s/0x0002/info) - Unexpected sense: PD 10(e0xfc/s6) Path 4433221106000000, CDB: 28 00 00 00 00 00 00 00 01 00, Sense: 6/29/00 mfi0: 1333 (590246113s/0x0002/info) - Unexpected sense: PD 10(e0xfc/s6) Path 4433221106000000, CDB: 28 00 00 00 00 00 00 00 01 00, Sense: 6/29/00 mfi0: 1334 (590246113s/0x0002/info) - Unexpected sense: PD 11(e0xfc/s7) Path 4433221107000000, CDB: 28 00 00 00 00 00 00 00 01 00, Sense: 6/29/00 mfi0: 1335 (590246113s/0x0002/info) - Unexpected sense: PD 11(e0xfc/s7) Path 4433221107000000, CDB: 28 00 00 00 00 00 00 00 01 00, Sense: 6/29/00 mfi0: 1336 (boot + 8s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/0809/15d9) mfi0: 1337 (boot + 8s/0x0020/info) - Firmware version 4.210.10-2910 mfi0: 1338 (boot + 11s/0x0020/info) - Package version 24.1.1-0001 mfi0: 1339 (boot + 11s/0x0020/info) - Board Revision mfi0: 1340 (boot + 33s/0x0002/info) - Inserted: PD 10(e0xfc/s6) mfi0: 1341 (boot + 33s/0x0002/info) - Inserted: PD 10(e0xfc/s6) Info: enclPd=fc, scsiType=0, portMap=00, sasAddr=4433221106000000,0000000000000000 mfi0: 1342 (boot + 33s/0x0002/info) - Inserted: PD 11(e0xfc/s7) mfi0: 1343 (boot + 33s/0x0002/info) - Inserted: PD 11(e0xfc/s7) Info: enclPd=fc, scsiType=0, portMap=01, sasAddr=4433221107000000,0000000000000000 mfi0: 1344 (590246486s/0x0020/info) - Time established as 09/14/18 13:21:26; (36 seconds since power on) mfi0: 1345 (590246496s/0x0002/info) - Unexpected sense: PD 10(e0xfc/s6) Path 4433221106000000, CDB: 28 00 00 00 00 00 00 00 01 00, Sense: 6/29/00 mfi0: 1346 (590246496s/0x0002/info) - Unexpected sense: PD 10(e0xfc/s6) Path 4433221106000000, CDB: 28 00 00 00 00 00 00 00 01 00, Sense: 6/29/00 mfi0: 1347 (590246496s/0x0002/info) - Unexpected sense: PD 11(e0xfc/s7) Path 4433221107000000, CDB: 28 00 00 00 00 00 00 00 01 00, Sense: 6/29/00 mfi0: 1348 (590246496s/0x0002/info) - Unexpected sense: PD 11(e0xfc/s7) Path 4433221107000000, CDB: 28 00 00 00 00 00 00 00 01 00, Sense: 6/29/00 mfi0: 1349 (boot + 8s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/0809/15d9) mfi0: 1350 (boot + 8s/0x0020/info) - Firmware version 4.210.10-2910 mfi0: 1351 (boot + 11s/0x0020/info) - Package version 24.1.1-0001 mfi0: 1352 (boot + 11s/0x0020/info) - Board Revision mfi0: 1353 (boot + 33s/0x0002/info) - Inserted: PD 10(e0xfc/s6) mfi0: 1354 (boot + 33s/0x0002/info) - Inserted: PD 10(e0xfc/s6) Info: enclPd=fc, scsiType=0, portMap=00, sasAddr=4433221106000000,0000000000000000 mfi0: 1355 (boot + 33s/0x0002/info) - Inserted: PD 11(e0xfc/s7) mfi0: 1356 (boot + 33s/0x0002/info) - Inserted: PD 11(e0xfc/s7) Info: enclPd=fc, scsiType=0, portMap=01, sasAddr=4433221107000000,0000000000000000 mfi0: 1357 (590246746s/0x0020/info) - Time established as 09/14/18 13:25:46; (36 seconds since power on) mfi0: 1358 (590246756s/0x0002/info) - Unexpected sense: PD 10(e0xfc/s6) Path 4433221106000000, CDB: 28 00 00 00 00 00 00 00 01 00, Sense: 6/29/00 mfi0: 1359 (590246756s/0x0002/info) - Unexpected sense: PD 10(e0xfc/s6) Path 4433221106000000, CDB: 28 00 00 00 00 00 00 00 01 00, Sense: 6/29/00 mfi0: 1360 (590246756s/0x0002/info) - Unexpected sense: PD 11(e0xfc/s7) Path 4433221107000000, CDB: 28 00 00 00 00 00 00 00 01 00, Sense: 6/29/00 mfi0: 1361 (590246756s/0x0002/info) - Unexpected sense: PD 11(e0xfc/s7) Path 4433221107000000, CDB: 28 00 00 00 00 00 00 00 01 00, Sense: 6/29/00 pcib5: <ACPI PCI-PCI bridge> irq 40 at device 3.0 numa-domain 0 on pci2 pci5: <ACPI PCI bus> numa-domain 0 on pcib5 ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port 0x5020-0x503f mem 0xc5c00000-0xc5dfffff,0xc5e04000-0xc5e07fff irq 40 at device 0.0 numa-domain 0 on pci5 ix0: Using MSI-X interrupts with 9 vectors ix0: Ethernet address: 0c:c4:7a:1f:2f:a0 ix0: PCI Express Bus: Speed 5.0GT/s Width x8 ix0: netmap queues/slots: TX 8/2048, RX 8/2048 ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port 0x5000-0x501f mem 0xc5a00000-0xc5bfffff,0xc5e00000-0xc5e03fff irq 44 at device 0.1 numa-domain 0 on pci5 ix1: Using MSI-X interrupts with 9 vectors ix1: Ethernet address: 0c:c4:7a:1f:2f:a1 ix1: PCI Express Bus: Speed 5.0GT/s Width x8 ix1: netmap queues/slots: TX 8/2048, RX 8/2048 pcib6: <ACPI PCI-PCI bridge> irq 40 at device 3.2 numa-domain 0 on pci2 pci6: <ACPI PCI bus> numa-domain 0 on pcib6 ix2: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port 0x4020-0x403f mem 0xc5600000-0xc57fffff,0xc5804000-0xc5807fff irq 42 at device 0.0 numa-domain 0 on pci6 ix2: Using MSI-X interrupts with 9 vectors ix2: Ethernet address: 0c:c4:7a:1f:2f:a2 ix2: PCI Express Bus: Speed 5.0GT/s Width x8 ix2: netmap queues/slots: TX 8/2048, RX 8/2048 ix3: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port 0x4000-0x401f mem 0xc5400000-0xc55fffff,0xc5800000-0xc5803fff irq 45 at device 0.1 numa-domain 0 on pci6 ix3: Using MSI-X interrupts with 9 vectors ix3: Ethernet address: 0c:c4:7a:1f:2f:a3 ix3: PCI Express Bus: Speed 5.0GT/s Width x8 ix3: netmap queues/slots: TX 8/2048, RX 8/2048 pci2: <unknown> at device 17.0 (no driver attached) ahci0: <Intel Wellsburg AHCI SATA controller> port 0x7110-0x7117,0x7100-0x7103,0x70f0-0x70f7,0x70e0-0x70e3,0x7020-0x703f mem 0xc7538000-0xc75387ff irq 16 at device 17.4 numa-domain 0 on pci2 ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 xhci0: <Intel Wellsburg USB 3.0 controller> mem 0xc7500000-0xc750ffff irq 19 at device 20.0 numa-domain 0 on pci2 xhci0: 32 bytes context size, 64-bit DMA usbus0 numa-domain 0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci2: <simple comms> at device 22.0 (no driver attached) pci2: <simple comms> at device 22.1 (no driver attached) ehci0: <Intel Wellsburg USB 2.0 controller> mem 0xc7534000-0xc75343ff irq 18 at device 26.0 numa-domain 0 on pci2 usbus1: EHCI version 1.0 usbus1 numa-domain 0 on ehci0 usbus1: 480Mbps High Speed USB v2.0 pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci2 pci7: <ACPI PCI bus> numa-domain 0 on pcib7 pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci2 pci8: <ACPI PCI bus> numa-domain 0 on pcib8 pcib9: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8 pci9: <ACPI PCI bus> numa-domain 0 on pcib9 vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xc6000000-0xc6ffffff,0xc7000000-0xc701ffff irq 16 at device 0.0 numa-domain 0 on pci9 vgapci0: Boot video device ehci1: <Intel Wellsburg USB 2.0 controller> mem 0xc7533000-0xc75333ff irq 18 at device 29.0 numa-domain 0 on pci2 usbus2: EHCI version 1.0 usbus2 numa-domain 0 on ehci1 usbus2: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci2 isa0: <ISA bus> numa-domain 0 on isab0 ahci1: <Intel Wellsburg AHCI SATA controller> port 0x7070-0x7077,0x7060-0x7063,0x7050-0x7057,0x7040-0x7043,0x7000-0x701f mem 0xc7532000-0xc75327ff irq 16 at device 31.2 numa-domain 0 on pci2 ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich4: <AHCI channel> at channel 0 on ahci1 ahcich5: <AHCI channel> at channel 1 on ahci1 ahcich6: <AHCI channel> at channel 2 on ahci1 ahcich7: <AHCI channel> at channel 3 on ahci1 ahcich8: <AHCI channel> at channel 4 on ahci1 ahcich9: <AHCI channel> at channel 5 on ahci1 ahciem1: <AHCI enclosure management bridge> on ahci1 pcib10: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 pcib10: _OSC returned error 0x10 pci10: <ACPI PCI bus> numa-domain 1 on pcib10 pcib11: <ACPI PCI-PCI bridge> irq 56 at device 2.0 numa-domain 1 on pci10 pci11: <ACPI PCI bus> numa-domain 1 on pcib11 ix4: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port 0xf020-0xf03f mem 0xfbc80000-0xfbcfffff,0xfbd04000-0xfbd07fff irq 56 at device 0.0 numa-domain 1 on pci11 ix4: Using MSI-X interrupts with 9 vectors ix4: Ethernet address: 00:1b:21:47:3b:24 ix4: PCI Express Bus: Speed 5.0GT/s Width x8 ix4: netmap queues/slots: TX 8/2048, RX 8/2048 ix5: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port 0xf000-0xf01f mem 0xfbc00000-0xfbc7ffff,0xfbd00000-0xfbd03fff irq 60 at device 0.1 numa-domain 1 on pci11 ix5: Using MSI-X interrupts with 9 vectors ix5: Ethernet address: 00:1b:21:47:3b:25 ix5: PCI Express Bus: Speed 5.0GT/s Width x8 ix5: netmap queues/slots: TX 8/2048, RX 8/2048 pcib12: <ACPI PCI-PCI bridge> irq 64 at device 3.0 numa-domain 1 on pci10 pci12: <ACPI PCI bus> numa-domain 1 on pcib12 em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xe000-0xe01f mem 0xfbec0000-0xfbedffff,0xfbe00000-0xfbe7ffff,0xfbee0000-0xfbee3fff irq 64 at device 0.0 numa-domain 1 on pci12 em0: Using MSIX interrupts with 3 vectors em0: Ethernet address: 68:05:ca:06:ee:3e em0: netmap queues/slots: TX 1/1024, RX 1/1024 acpi_button0: <Power Button> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (115200,n,8,1) uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcf7ff,0xcf800-0xd07ff,0xd0800-0xd17ff on isa0 ppc0: cannot reserve I/O port range est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 est2: <Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2: <CPU Frequency Thermal Control> on cpu2 est3: <Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3: <CPU Frequency Thermal Control> on cpu3 est4: <Enhanced SpeedStep Frequency Control> on cpu4 p4tcc4: <CPU Frequency Thermal Control> on cpu4 est5: <Enhanced SpeedStep Frequency Control> on cpu5 p4tcc5: <CPU Frequency Thermal Control> on cpu5 est6: <Enhanced SpeedStep Frequency Control> on cpu6 p4tcc6: <CPU Frequency Thermal Control> on cpu6 est7: <Enhanced SpeedStep Frequency Control> on cpu7 p4tcc7: <CPU Frequency Thermal Control> on cpu7 est8: <Enhanced SpeedStep Frequency Control> on cpu8 p4tcc8: <CPU Frequency Thermal Control> on cpu8 est9: <Enhanced SpeedStep Frequency Control> on cpu9 p4tcc9: <CPU Frequency Thermal Control> on cpu9 est10: <Enhanced SpeedStep Frequency Control> on cpu10 p4tcc10: <CPU Frequency Thermal Control> on cpu10 est11: <Enhanced SpeedStep Frequency Control> on cpu11 p4tcc11: <CPU Frequency Thermal Control> on cpu11 est12: <Enhanced SpeedStep Frequency Control> on cpu12 p4tcc12: <CPU Frequency Thermal Control> on cpu12 est13: <Enhanced SpeedStep Frequency Control> on cpu13 p4tcc13: <CPU Frequency Thermal Control> on cpu13 est14: <Enhanced SpeedStep Frequency Control> on cpu14 p4tcc14: <CPU Frequency Thermal Control> on cpu14 est15: <Enhanced SpeedStep Frequency Control> on cpu15 p4tcc15: <CPU Frequency Thermal Control> on cpu15 est16: <Enhanced SpeedStep Frequency Control> on cpu16 p4tcc16: <CPU Frequency Thermal Control> on cpu16 est17: <Enhanced SpeedStep Frequency Control> on cpu17 p4tcc17: <CPU Frequency Thermal Control> on cpu17 est18: <Enhanced SpeedStep Frequency Control> on cpu18 p4tcc18: <CPU Frequency Thermal Control> on cpu18 est19: <Enhanced SpeedStep Frequency Control> on cpu19 p4tcc19: <CPU Frequency Thermal Control> on cpu19 est20: <Enhanced SpeedStep Frequency Control> on cpu20 p4tcc20: <CPU Frequency Thermal Control> on cpu20 est21: <Enhanced SpeedStep Frequency Control> on cpu21 p4tcc21: <CPU Frequency Thermal Control> on cpu21 est22: <Enhanced SpeedStep Frequency Control> on cpu22 p4tcc22: <CPU Frequency Thermal Control> on cpu22 est23: <Enhanced SpeedStep Frequency Control> on cpu23 p4tcc23: <CPU Frequency Thermal Control> on cpu23 est24: <Enhanced SpeedStep Frequency Control> on cpu24 p4tcc24: <CPU Frequency Thermal Control> on cpu24 est25: <Enhanced SpeedStep Frequency Control> on cpu25 p4tcc25: <CPU Frequency Thermal Control> on cpu25 est26: <Enhanced SpeedStep Frequency Control> on cpu26 p4tcc26: <CPU Frequency Thermal Control> on cpu26 est27: <Enhanced SpeedStep Frequency Control> on cpu27 p4tcc27: <CPU Frequency Thermal Control> on cpu27 est28: <Enhanced SpeedStep Frequency Control> on cpu28 p4tcc28: <CPU Frequency Thermal Control> on cpu28 est29: <Enhanced SpeedStep Frequency Control> on cpu29 p4tcc29: <CPU Frequency Thermal Control> on cpu29 est30: <Enhanced SpeedStep Frequency Control> on cpu30 p4tcc30: <CPU Frequency Thermal Control> on cpu30 est31: <Enhanced SpeedStep Frequency Control> on cpu31 p4tcc31: <CPU Frequency Thermal Control> on cpu31 est32: <Enhanced SpeedStep Frequency Control> on cpu32 p4tcc32: <CPU Frequency Thermal Control> on cpu32 est33: <Enhanced SpeedStep Frequency Control> on cpu33 p4tcc33: <CPU Frequency Thermal Control> on cpu33 est34: <Enhanced SpeedStep Frequency Control> on cpu34 p4tcc34: <CPU Frequency Thermal Control> on cpu34 est35: <Enhanced SpeedStep Frequency Control> on cpu35 p4tcc35: <CPU Frequency Thermal Control> on cpu35 est36: <Enhanced SpeedStep Frequency Control> on cpu36 p4tcc36: <CPU Frequency Thermal Control> on cpu36 est37: <Enhanced SpeedStep Frequency Control> on cpu37 p4tcc37: <CPU Frequency Thermal Control> on cpu37 est38: <Enhanced SpeedStep Frequency Control> on cpu38 p4tcc38: <CPU Frequency Thermal Control> on cpu38 est39: <Enhanced SpeedStep Frequency Control> on cpu39 p4tcc39: <CPU Frequency Thermal Control> on cpu39 random: unblocking device. ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec ugen1.1: <Intel EHCI root HUB> at usbus1 ugen2.1: <Intel EHCI root HUB> at usbus2 ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <WDC WD3003FZEX-00Z4SA0 01.01A01> ACS-2 ATA SATA 3.x device ada0: Serial Number WD-WCC137TALF5K ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 2861588MB (5860533168 512 byte sectors) ada0: quirks=0x1<4K> ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <WDC WD3003FZEX-00Z4SA0 01.01A01> ACS-2 ATA SATA 3.x device ada1: Serial Number WD-WCC134FU4DRY ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 2861588MB (5860533168 512 byte sectors) ada1: quirks=0x1<4K> ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 ada2: <WDC WD3003FZEX-00Z4SA0 01.01A01> ACS-2 ATA SATA 3.x device ada2: Serial Number WD-WCC137TALKU5 ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 2861588MB (5860533168 512 byte sectors) ada2: quirks=0x1<4K> ada3 at ahcich4 bus 0 scbus5 target 0 lun 0 ada3: <WDC WD4003FZEX-00Z4SA0 01.01A01> ACS-2 ATA SATA 3.x device ada3: Serial Number WD-WCC5D2UU1U3Y ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 3815447MB (7814037168 512 byte sectors) mfid0 numa-domain 0 on mfi0 ada3: quirks=0x1<4K> ada4 at ahcich5 bus 0 scbus6 target 0 lun 0 ada4: <WDC WD4003FZEX-00Z4SA0 01.01A01> ACS-2 ATA SATA 3.x device ada4: Serial Number WD-WCC5D2UU1SF9 ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada4: Command Queueing enabled mfid0: 476416MB (975699968 sectors) RAID volume 'SSD1' is optimal ada4: 3815447MB (7814037168 512 byte sectors) ada4: quirks=0x1<4K> ada5 at ahcich6 bus 0 scbus7 target 0 lun 0 ada5: <WDC WD4003FZEX-00Z4SA0 01.01A01> ACS-2 ATA SATA 3.x device ada5: Serial Number WD-WCC5D2UU18NK ada5: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytesmfid1 numa-domain 0 on mfi0 mfid1: 476416MB (975699968 sectors) RAID volume 'SSD2' is optimal ) ada5: Command Queueing enabled ada5: 3815447MB (7814037168 512 byte sectors) ada5: quirks=0x1<4K> ada6 at ahcich7 bus 0 scbus8 target 0 lun 0 ada6: <WDC WD4003FZEX-00Z4SA0 01.01A01> ACS-2 ATA SATA 3.x device ada6: Serial Number WD-WCC5D2UU1N29 ada6: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada6: Command Queueing enabled ada6: 3815447MB (7814037168 512 byte sectors) ada6: quirks=0x1<4K> ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ses1 at ahciem1 bus 0 scbus11 target 0 lun 0 ses1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses1: SEMB SES Device nvd0: <INTEL SSDPEDMD800G4> NVMe namespace nvd0: 763097MB (1562824368 512 byte sectors) Trying to mount root from zfs:zroot/ROOT/default []... uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 21 ports with 21 removable, self powered ugen1.2: <vendor 0x8087 product 0x800a> at usbus1 uhub3 numa-domain 0 on uhub0 uhub3: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1 ugen2.2: <vendor 0x8087 product 0x8002> at usbus2 uhub4 numa-domain 0 on uhub1 uhub4: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus2 ugen0.2: <vendor 0x04d9 product 0x1400> at usbus0 ukbd0 numa-domain 0 on uhub2 ukbd0: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 1> on usbus0 kbd2 at ukbd0 uhub3: 6 ports with 6 removable, self powered uhub4: 8 ports with 8 removable, self powered ugen0.3: <FTDI USB FAST SERIAL ADAPTER> at usbus0 ugen0.4: <vendor 0x0557 product 0x7000> at usbus0 uhub5 numa-domain 0 on uhub2 uhub5: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 3> on usbus0 uhub5: 4 ports with 3 removable, self powered Root mount waiting for: usbus0 ugen0.5: <vendor 0x0557 product 0x2419> at usbus0 ukbd1 numa-domain 0 on uhub5 ukbd1: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 4> on usbus0 kbd3 at ukbd1 Setting hostuuid: 7aad0660-b83f-11dc-b276-10bf48ba3275. Setting hostid: 0x31c65a78. No suitable dump device was found. Entropy harvesting:/etc/rc: WARNING: $harvest_interrupt is not set properly - see rc.conf(5). sysctl: unknown oid 'kern.random.sys.harvest.interrupt' /etc/rc: WARNING: $harvest_ethernet is not set properly - see rc.conf(5). sysctl: unknown oid 'kern.random.sys.harvest.ethernet' /etc/rc: WARNING: $harvest_p_to_p is not set properly - see rc.conf(5). sysctl: unknown oid 'kern.random.sys.harvest.point_to_point' /etc/rc: WARNING: $harvest_swi is not set properly - see rc.conf(5). sysctl: unknown oid 'kern.random.sys.harvest.swi' . swapon: /dev/gpt/swap0: No such file or directory swapon: /dev/gpt/swap1: No such file or directory Starting file system checks: Mounting local filesystems:. Mounting ZFS filesystems: (36/78)(78/78) ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/mysql /usr/local/lib/nss /usr/local/lib/perl5/5.24/mach/CORE 32-bit compatibility ldconfig path: /usr/lib32 Setting hostname: zoo.freebsd.org. Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED Feeding entropy: . lo0: link state changed to UP /etc/rc: WARNING: $ipv6_ifconfig_em0 is obsolete. Use ifconfig_em0_ipv6 instead. Starting Network: lo0 ix0 ix1 ix2 ix3 ix4 ix5 em0. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8 inet 127.0.0.1 netmask 0xff000000 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> groups: lo ix0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=e407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether 0c:c4:7a:1f:2f:a0 hwaddr 0c:c4:7a:1f:2f:a0 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect status: no carrier ix1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=e407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether 0c:c4:7a:1f:2f:a1 hwaddr 0c:c4:7a:1f:2f:a1 inet 192.168.5.1 netmask 0xffffff00 broadcast 192.168.5.255 inet 192.168.7.1 netmask 0xffffff00 broadcast 192.168.7.255 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect status: no carrier ix2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=e407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether 0c:c4:7a:1f:2f:a2 hwaddr 0c:c4:7a:1f:2f:a2 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect status: no carrier ix3: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=e407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether 0c:c4:7a:1f:2f:a3 hwaddr 0c:c4:7a:1f:2f:a3 inet 192.168.8.1 netmask 0xffffff00 broadcast 192.168.8.255 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect status: no carrier ix4: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=e407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether 00:1b:21:47:3b:24 hwaddr 00:1b:21:47:3b:24 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect status: no carrier ix5: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=e407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether 00:1b:21:47:3b:25 hwaddr 00:1b:21:47:3b:25 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect status: no carrier em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC> ether 68:05:ca:06:ee:3e hwaddr 68:05:ca:06:ee:3e inet 64.7.141.9 netmask 0xffffffe0 broadcast 64.7.141.31 inet6 fe80::6a05:caff:fe06:ee3e%em0 prefixlen 64 scopeid 0x7 inet6 2607:f3e0:0:2::4a1 prefixlen 64 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> media: Ethernet autoselect status: no carrier Starting devd. Starting Network: ix0. ix0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=e407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether 0c:c4:7a:1f:2f:a0 hwaddr 0c:c4:7a:1f:2f:a0 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect status: no carrier ix1: link state changed to UP Starting Network: ix2. ix2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=e407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether 0c:c4:7a:1f:2f:a2 hwaddr 0c:c4:7a:1f:2f:a2 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect status: no carrier em0: link state changed to UP Starting Network: ix4. ix4: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=e407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether 00:1b:21:47:3b:24 hwaddr 00:1b:21:47:3b:24 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect status: no carrier Starting Network: ix5. ix5: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=e407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6> ether 00:1b:21:47:3b:25 hwaddr 00:1b:21:47:3b:25 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect status: no carrier ums0 numa-domain 0 on uhub2 ums0: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 1> on usbus0 ums0: 5 buttons and [XYZ] coordinates ID=1 uftdi0 numa-domain 0 on uhub2 uftdi0: <USB FAST SERIAL ADAPTER> on usbus0 uftdi1 numa-domain 0 on uhub2 uftdi1: <USB FAST SERIAL ADAPTER> on usbus0 ums1 numa-domain 0 on uhub5 ums1: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 4> on usbus0 ums1: 3 buttons and [Z] coordinates ID=0 Starting pflog. Enabling pfpflog0: promiscuous mode enabled Sep 14 13:27:46 pflogd[983]: [priv]: msg PRIV_OPEN_LOG received . add host 127.0.0.1: gateway lo0 fib 0: route already in table add net default: gateway 64.7.141.1 Additional inet routing options: gateway=YES. add host ::1: gateway lo0 fib 0: route already in table add net fe80::: gateway ::1 add net ff02::: gateway ::1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 add net default: gateway 2607:f3e0:0:2::1 Additional inet6 routing options: gateway=YES. Creating and/or trimming log files. Starting syslogd. ix3: link state changed to UP Starting rpcbind. NFS access cache time=60 Starting named. Clearing /tmp (X related). /etc/rc: WARNING: $ipxrouted_enable is not set properly - see rc.conf(5). Starting mountd. NFSv4 is disabled Starting nfsd. Starting statd. Starting lockd. Recovering vi editor sessions:. Updating motd:. Mounting late filesystems:. Starting ntpd. Writing entropy file:. Writing early boot entropy file:. Starting powerd. Starting dhcpd. Internet Systems Consortium DHCP Server 4.3.6 Copyright 2004-2017 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Config file: /usr/local/etc/dhcpd.conf Database file: /var/db/dhcpd/dhcpd.leases PID file: /var/run/dhcpd/dhcpd.pid Wrote 0 deleted host decls to leases file. Wrote 0 new dynamic host decls to leases file. Wrote 98 leases to leases file. Listening on BPF/ix1/0c:c4:7a:1f:2f:a1/192.168.5.0/24 Sending on BPF/ix1/0c:c4:7a:1f:2f:a1/192.168.5.0/24 Sending on Socket/fallback/fallback-net Remounting user owned zfs filesystems Starting conserver. [Fri Sep 14 13:27:59 2018] conserver (1706): conserver.com version 8.2.1 [Fri Sep 14 13:27:59 2018] conserver (1706): started as `root' by `root' [Fri Sep 14 13:27:59 2018] conserver (1706): daemonizing Performing sanity check on sshd configuration. Starting sshd. Configuring vt: blanktime. swapon: /dev/gpt/swap0: No such file or directory swapon: /dev/gpt/swap1: No such file or directory Starting sendmail_submit. Sep 14 13:28:16 zoo ntpd[1281]: error resolving pool 0.freebsd.pool.ntp.org: hostname nor servname provided, or not known (8) Starting sendmail_msp_queue. Starting cron. sysctl: unknown oid 'sysctl vfs.zfs.min_auto_ashift' at line 16 /etc/rc: WARNING: $mrouted_enable is not set properly - see rc.conf(5). /etc/rc: WARNING: $kerberos5_server_enable is not set properly - see rc.conf(5). Starting inetd. Starting background file system checks in 60 seconds. Fri Sep 14 13:28 FreeBSD/amd64 (zoo.freebsd.org) (ttyu0)