I've just installed FreeBSD 12.0-RELEASE on a brand new Dell T130 with a PERC330 raid card set to HBA. To get better performance I prioritized the mrsas driver versus de mfi via device.hints. when the disks are detected, even a SSD disk, all of them as SATA. <ATA HUS722T2TALA600 MU03> at scbus1 target 0 lun 0 (pass0,da0) <ATA ST2000NM0018-2F3 EA04> at scbus1 target 1 lun 0 (pass1,da1) <ATA SanDisk SDSSDA24 30RL> at scbus1 target 2 lun 0 (pass2,da2) <PLDS DVD+-RW DU-8A5LH 6D5M> at scbus6 target 0 lun 0 (cd0,pass3) <AHCI SGPIO Enclosure 1.00 0001> at scbus8 target 0 lun 0 (pass4,ses0) cd0 at ahcich4 bus 0 scbus6 target 0 lun 0 cd0: <PLDS DVD+-RW DU-8A5LH 6D5M> Removable CD-ROM SCSI device cd0: Serial Number 2WXYCPLC7898970A00 cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed da0 at mrsas0 bus 1 scbus1 target 0 lun 0 da0: <ATA HUS722T2TALA600 MU03> Fixed Direct Access SPC-4 SCSI device da0: Serial Number WM789789789PK da0: 150.000MB/s transfers da0: 1907729MB (3907029168 512 byte sectors) da2 at mrsas0 bus 1 scbus1 target 2 lun 0 da2: <ATA SanDisk SDSSDA24 30RL> Fixed Direct Access SPC-4 SCSI device da2: Serial Number 172757804261 da2: 150.000MB/s transfers da2: 228936MB (468862128 512 byte sectors) da1 at mrsas0 bus 1 scbus1 target 1 lun 0 da1: <ATA ST2000NM0018-2F3 EA04> Fixed Direct Access SPC-4 SCSI device da1: Serial Number ZDS7AJSH da1: 150.000MB/s transfers da1: 1907729MB (3907029168 512 byte sectors)
dmesg ------- ---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-RELEASE-p2 GENERIC amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(vga): resolution 640x480 CPU: Intel(R) Xeon(R) CPU E3-1220 v6 @ 3.00GHz (3000.11-MHz K8-class CPU) Origin="GenuineIntel" Id=0x906e9 Family=0x6 Model=0x9e Stepping=9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16413990912 (15653 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <DELL PE_SC3 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 on motherboard Launching APs: 2 1 3 Timecounter "TSC-low" frequency 1500055916 Hz quality 1000 random: entropy device external interface netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" kbd1 at kbdmux0 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <DELL PE_SC3> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 24000000 Hz quality 950 Event timer "HPET" frequency 24000000 Hz quality 550 Event timer "HPET1" frequency 24000000 Hz quality 440 Event timer "HPET2" frequency 24000000 Hz quality 440 Event timer "HPET3" frequency 24000000 Hz quality 440 Event timer "HPET4" frequency 24000000 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 AVAGO MegaRAID SAS FreeBSD mrsas driver version: 06.712.04.00-fbsd mrsas0: <AVAGO Fury SAS Controller> port 0x3000-0x30ff mem 0x92c00000-0x92c0ffff,0x92b00000-0x92bfffff irq 16 at device 0.0 on pci1 mrsas0: Using MSI-X with 4 number of vectors mrsas0: FW supports <96> MSIX vector,Online CPU 4 Current MSIX <4> mrsas0: FW supports: UnevenSpanSupport=1 mrsas0: MSI-x interrupts setup success pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.2 on pci0 pci2: <ACPI PCI bus> on pcib2 xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0x92d00000-0x92d0ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0: waiting for BIOS to give up control xhci_interrupt: host controller halted xhci_interrupt: host controller halted xhci_interrupt: host controller halted usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) pci0: <simple comms> at device 22.1 (no driver attached) ahci0: <Intel Sunrise Point AHCI SATA controller> port 0x4040-0x4047,0x4048-0x404b,0x4020-0x403f mem 0x92d14000-0x92d15fff,0x92d17000-0x92d170ff,0x92d16000-0x92d167ff irq 16 at device 23.0 on pci0 ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 pci3: <ACPI PCI bus> on pcib3 bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x92a30000-0x92a3ffff,0x92a40000-0x92a4ffff,0x92a50000-0x92a5ffff irq 16 at device 0.0 on pci3 bge0: APE FW version: NCSI v1.4.22.0 bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E miibus0: <MII bus> on bge0 brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Using defaults for TSO: 65518/35/2048 bge0: Ethernet address: 50:9a:4c:94:33:5a bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x92a00000-0x92a0ffff,0x92a10000-0x92a1ffff,0x92a20000-0x92a2ffff irq 17 at device 0.1 on pci3 bge1: APE FW version: NCSI v1.4.22.0 bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E miibus1: <MII bus> on bge1 brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Using defaults for TSO: 65518/35/2048 bge1: Ethernet address: 50:9a:4c:94:33:5b pcib4: <ACPI PCI-PCI bridge> irq 18 at device 29.2 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci4 pci5: <ACPI PCI bus> on pcib5 pcib6: <PCI-PCI bridge> at device 0.0 on pci5 pci6: <PCI bus> on pcib6 pcib7: <PCI-PCI bridge> at device 0.0 on pci6 pci7: <PCI bus> on pcib7 vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x92800000-0x92803fff,0x92000000-0x927fffff irq 18 at device 0.0 on pci7 vgapci0: Boot video device isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 pci0: <memory> at device 31.2 (no driver attached) acpi_button0: <Sleep Button> on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcb7ff,0xed800-0xf17ff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 201f00002100 device_attach: est0 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 201f00002100 device_attach: est1 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 202400002100 device_attach: est2 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 202400002100 device_attach: est3 attach returned 6 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec mrsas0: Disestablish mrsas intr hook ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ses0 at ahciem0 bus 0 scbus8 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device cd0 at ahcich4 bus 0 scbus6 target 0 lun 0 cd0: <PLDS DVD+-RW DU-8A5LH 6D5M> Removable CD-ROM SCSI device cd0: Serial Number 2WXYCPLCxxxxxxxxxx cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed da0 at mrsas0 bus 1 scbus1 target 0 lun 0 da0: <ATA HUS722T2TALA600 MU03> Fixed Direct Access SPC-4 SCSI device da0: Serial Number WMxxxxxxxxxxxx da0: 150.000MB/s transfers da0: 1907729MB (3907029168 512 byte sectors) da2 at mrsas0 bus 1 scbus1 target 2 lun 0 da2: <ATA SanDisk SDSSDA24 30RL> Fixed Direct Access SPC-4 SCSI device da2: Serial Number 172757804261 da2: 150.000MB/s transfers da2: 228936MB (468862128 512 byte sectors) da1 at mrsas0 bus 1 scbus1 target 1 lun 0 da1: <ATA ST2000NM0018-2F3 EA04> Fixed Direct Access SPC-4 SCSI device da1: Serial Number ZDxxxxxx da1: 150.000MB/s transfers da1: 1907729MB (3907029168 512 byte sectors) Trying to mount root from zfs:zroot/ROOT/default []... uhub0: 26 ports with 26 removable, self powered ugen0.2: <no manufacturer Gadget USB HUB> at usbus0 uhub1 on uhub0 uhub1: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 1> on usbus0 uhub1: 6 ports with 6 removable, self powered ugen0.3: <LITEON Technology USB Keyboard> at usbus0 ukbd0 on uhub0 ukbd0: <EP1 Interrupt> on usbus0 kbd2 at ukbd0 ugen0.4: <Kingston DataTraveler 2.0> at usbus0 umass0 on uhub0 umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.10, addr 3> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0xc100 umass0:9:0: Attached to scbus9 da3 at umass-sim0 bus 0 scbus9 target 0 lun 0 da3: <Kingston DataTraveler 2.0 PMAP> Removable Direct Access SCSI device da3: Serial Number 5B75139A229B da3: 40.000MB/s transfers da3: 3936MB (8060928 512 byte sectors) da3: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> lo0: link state changed to UP bge0: link state changed to DOWN bge0: link state changed to UP bridge1: Ethernet address: 02:1c:1d:b0:da:01 bge0: promiscuous mode enabled bridge1: link state changed to UP tap1: Ethernet address: 00:bd:09:2f:f7:01 tap1: promiscuous mode enabled tap2: Ethernet address: 00:bd:e5:2f:f7:02 tap2: promiscuous mode enabled tap2: link state changed to UP nd6_dad_timer: cancel DAD on tap2 because of ND6_IFF_IFDISABLED. tap3: Ethernet address: 00:bd:2e:64:f7:03 tap3: promiscuous mode enabled tap3: link state changed to UP nd6_dad_timer: cancel DAD on tap3 because of ND6_IFF_IFDISABLED. ugen0.4: <Kingston DataTraveler 2.0> at usbus0 (disconnected) umass0: at uhub0, port 11, addr 3 (disconnected) da3 at umass-sim0 bus 0 scbus9 target 0 lun 0 da3: <Kingston DataTraveler 2.0 PMAP> s/n 5B75139A229B detached (da3:umass-sim0:0:0:0): Periph destroyed umass0: detached