Created attachment 203550 [details] No Carrier Hi, I am trying to configure Chelsio network card (T6225-CR and T62100-LP-CR) on FreeBSD 12.0 OS. I have loaded cxgbe and ccr modules in /boot/loader.conf file. When I am running this ifconfig command, I can see all 4 ports cc0,cc1,cc2,cc3 are listing on the OS but status is showing no carrier. Something is missing or might be the steps I have followed for configuration is not sufficient. Can you please tell me how to configure this Chelsio network card (T6225-CR and T62100-LP-CR). When I run kldload cxgbe, it allows to upgrade the firmware to 1.19.1.0 version. T6225-CR is connected to PCie gen3 x8 and T62100-LP-CR connected to PCIe gen3 x16. All these network adapter connected to Supermicro X11SPi-TF server. Please help me to configure this. Best Regards, Debidatta
Created attachment 203566 [details] Firmware_ver_Chelsio
Created attachment 203567 [details] /boot/loader.conf file data
Created attachment 203568 [details] kldstat values
What are the supported FC SFP Transceiver for this T6225-CR and T62100-LP-CR.
Reclassify.
The "No Carrier" attachment shows that all of the T6 interfaces are administratively down. They are not expected to link up in this state. Run "ifconfig ... up" and make sure you see "UP" and "RUNNING" in the flags displayed by ifconfig. The port is powered up only if you see both. I'm closing this as "Not a Bug". Reopen it if you can't get a link even when the interface is up.