I tested list files: FreeBSD-12.1-STABLE-arm64-aarch64-RPI3-20200102-r356238.img FreeBSD-13.0-CURRENT-arm64-aarch64-RPI3-20200102-r356261.img Raspberry pi 3B+ needs more than 10 mins. ------------------------------------------------- Serial output: MMC: mmc@7e300000: 0 Loading Environment from FAT... In: serial Out: vidconsole Err: vidconsole Net: No ethernet found. starting USB... Bus usb@7e980000: scanning bus usb@7e980000 for devices... Timeout poll on interrupt endpoint Failed to get keyboard state from device 0c45:8101 4 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found EFI removable media binary efi/boot/bootaa64.efi libfdt fdt_check_header(): FDT_ERR_BADMAGIC Scanning disk mmc@7e300000.blk... Found 3 disks BootOrder not defined EFI boot manager: Cannot load any image 644432 bytes read in 33 ms (18.6 MiB/s) libfdt fdt_check_header(): FDT_ERR_BADMAGIC Consoles: EFI console Reading loader env vars from /efi/freebsd/loader.env Setting currdev to disk0p1: FreeBSD/arm64 EFI loader, Revision 1.1 Command line arguments: loader.efi EFI version: 2.80 EFI Firmware: Das U-Boot (rev 8217.4096) Console: efi (0) Load Path: /efi\boot\bootaa64.efi Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,MBR,0xf6d0be43,0x81f,0x18fa8) Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,MBR,0xf6d0be43,0x81f,0x18fa8) Setting currdev to disk0p1: Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(2,MBR,0xf6d0be43,0x197c7,0xeb68839) Setting currdev to disk0p2: Loading /boot/defaults/loader.conf Loading /boot/device.hints Loading /boot/loader.conf Loading /boot/loader.conf.local Loading kernel... /boot/kernel/kernel text=0x8f4780 data=0x18d220+0x6cad44 syms=[0x8+0x12d908+0x8+0x11b827] Loading configured modules... /boot/kernel/umodem.ko text=0x1bc0 text=0xf80 data=0x102e0+0xfd28 syms=[0x8+0xe28+0x8+0xa7e] /boot/entropy size=0x1000 Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... Using DTB provided by EFI at 0x7ef6000. EFI framebuffer information: addr, size 0x3eaf0000, 0x10a800 dimensions 656 x 416 stride 656 masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000 ---<<BOOT>>--- Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.1-STABLE r356238 GENERIC arm64 FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) VT(efifb): resolution 656x416 KLD file umodem.ko is missing dependencies Starting CPU 1 (1) Starting CPU 2 (2) Starting CPU 3 (3) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs random: unblocking device. random: entropy device external interface MAP 39f43000 mode 2 pages 1 MAP 39f4c000 mode 2 pages 1 MAP 3b350000 mode 2 pages 16 MAP 3f100000 mode 1 pages 1 kbd0 at kbdmux0 ofwbus0: <Open Firmware Device Tree> simplebus0: <Flattened device tree simple bus> on ofwbus0 ofw_clkbus0: <OFW clocks bus> on ofwbus0 clk_fixed0: <Fixed clock> on ofw_clkbus0 clk_fixed1: <Fixed clock> on ofw_clkbus0 regfix0: <Fixed Regulator> on ofwbus0 regfix1: <Fixed Regulator> on ofwbus0 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 lintc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0 intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 48 on simplebus0 gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 24,25 on simplebus0 gpiobus0: <OFW GPIO bus> on gpio0 generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0 Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000 usb_nop_xceiv0: <USB NOP PHY> on ofwbus0 bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21 on simplebus0 Checking root against brcm,bcm2837 bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023 on simplebus0 bcm2835_clkman0: <BCM283x Clock Manager> mem 0x7e101000-0x7e102fff on simplebus0 bcmrng0: <Broadcom BCM2835 RNG> mem 0x7e104000-0x7e10400f irq 22 on simplebus0 mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 23 on simplebus0 gpioc0: <GPIO controller> on gpio0 uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 26 on simplebus0 uart0: console (115200,n,8,1) spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e2041ff irq 28 on simplebus0 spibus0: <OFW SPI bus> on spi0 spibus0: <unknown card> at cs 0 mode 0 spibus0: <unknown card> at cs 1 mode 0 iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 40 on simplebus0 bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 46,47 on simplebus0 usbus0 on bcm283x_dwcotg0 sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 50 on simplebus0 mmc0: <MMC/SD bus> on sdhci_bcm0 fb0: <BCM2835 VT framebuffer driver> on simplebus0 fbd0 on fb0 VT: Replacing driver "efifb" with new "fb". fb0: 656x416(656x416@0,0) 24bpp fb0: fbswap: 1, pitch 1968, base rx3eb33000, screen_size 818688 pmu0: <Performance Monitoring Unit> irq 0 on ofwbus0 cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 bcm2835_cpufreq0: <CPU Frequency Control> on cpu0 cpu1: <Open Firmware CPU> on cpulist0 cpu2: <Open Firmware CPU> on cpulist0 cpu3: <Open Firmware CPU> on cpulist0 gpioled0: <GPIO LEDs> on ofwbus0 gpioled0: <led1> failed to map pin cryptosoft0: <software crypto> intc0: Stray irq 17 disabled Timecounters tick every 1.000 msec iicbus0: <OFW I2C bus> on iichb0 iic0: <I2C generic I/O> on iicbus0 usbus0: 480Mbps High Speed USB v2.0 ugen0.1: <DWCOTG OTG Root HUB> at usbus0 uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 mmcsd0: 126GB <SDHC AcMKS 0.2 SN 40400CB7 MFG 06/2019 by 156 SO> at mmc0 50.0MHz/4bit/65535-block bcm2835_cpufreq0: ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF mbox0: mbox response error bcm2835_cpufreq0: can't set clock rate (id=4) Release APs...done CPU 0: ARM Cortex-A53 r0p4 affinity: 0 Trying to mount root from ufs:/dev/ufs/rootfs [rw]... Instruction Set Attributes 0 = <CRC32> Instruction Set Attributes 1 = <> Processor Features 0 = <AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32> Processor Features 1 = <0> Memory Model Features 0 = <4k Granule,64k Granule,S/NS Mem,MixedEndian,16bit ASID,1TB PA> Memory Model Features 1 = <> Memory Model Features 2 = <32b CCIDX,48b VA> Debug Features 0 = <2 CTX Breakpoints,4 Watchpoints,6 Breakpoints,PMUv3,Debug v8> Debug Features 1 = <0> Auxiliary Features 0 = <0> Auxiliary Features 1 = <0> CPU 1: ARM Cortex-A53 r0p4 affinity: 1 CPU 2: ARM Cortex-A53 r0p4 affinity: 2 CPU 3: ARM Cortex-A53 r0p4 affinity: 3 WARNING: was not properly dismounted Warning: no time-of-day clock registered, system time will not be set accurately Setting hostuuid: 30303030-3030-3030-6239-333638386637. Setting hostid: 0x837a41df. Starting file system checks: uhub0: 1 port with 1 removable, self powered /dev/ufs/rootfs: 23455 files, 662258 used, 29221965 free (141 frags, 3652728 blocks, 0.0% fragmentation) Mounting local filesystems:. ELF ldconfig path: /lib /usr/lib /usr/lib/compat Setting hostname: generic. Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED Feeding entropy: . lo0: link state changed to UP Starting Network: lo0. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 groups: lo nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> Starting devd. add host 127.0.0.1: gateway lo0 fib 0: route already in table add host ::1: gateway lo0 fib 0: route already in table add net fe80::: gateway ::1 add net ff02::: gateway ::1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 Creating and/or trimming log files. Starting syslogd. Clearing /tmp (X related). Updating motd:. Mounting late filesystems:. Configuring vt: blanktime. Performing sanity check on sshd configuration. Starting sshd. Starting cron. Starting background file system checks in 60 seconds. Thu Jan 2 07:44:33 UTC FreeBSD/arm64 (generic) (ttyu0) login: root Password: Jan 2 07:44:42 generic login[848]: ROOT LOGIN (root) ON ttyu0 FreeBSD 12.1-STABLE r356238 GENERIC Welcome to FreeBSD! Release Notes, Errata: https://www.FreeBSD.org/releases/ Security Advisories: https://www.FreeBSD.org/security/ FreeBSD Handbook: https://www.FreeBSD.org/handbook/ FreeBSD FAQ: https://www.FreeBSD.org/faq/ Questions List: https://lists.FreeBSD.org/mailman/listinfo/freebsd-questions/ FreeBSD Forums: https://forums.FreeBSD.org/ Documents installed with the system are in the /usr/local/share/doc/freebsd/ directory, or can be installed later with: pkg install en-freebsd-doc For other languages, replace "en" with a language code like de or fr. Show the version of FreeBSD installed: freebsd-version ; uname -a Please include that output and any error messages when posting questions. Introduction to manual pages: man man FreeBSD directory layout: man hier Edit /etc/motd to change this login announcement. root@generic:~ # MMC: mmc@7e300000: 0 Loading Environment from FAT... In: serial Out: vidconsole Err: vidconsole Net: No ethernet found. starting USB... Bus usb@7e980000: scanning bus usb@7e980000 for devices... Timeout poll on interrupt endpoint Failed to get keyboard state from device 0c45:8101 4 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found EFI removable media binary efi/boot/bootaa64.efi libfdt fdt_check_header(): FDT_ERR_BADMAGIC Scanning disk mmc@7e300000.blk... Found 3 disks BootOrder not defined EFI boot manager: Cannot load any image 678632 bytes read in 33 ms (19.6 MiB/s) libfdt fdt_check_header(): FDT_ERR_BADMAGIC Consoles: EFI console Reading loader env vars from /efi/freebsd/loader.env Setting currdev to disk0p1: FreeBSD/arm64 EFI loader, Revision 1.1 (Thu Jan 2 07:13:51 UTC 2020 root@releng1.nyi.freebsd.org) Command line arguments: loader.efi Image base: 0x39e95000 EFI version: 2.80 EFI Firmware: Das U-Boot (rev 8217.4096) Console: efi (0x1000) Load Path: /efi\boot\bootaa64.efi Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,MBR,0xf6d08651,0x81f,0x18fa8) Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,MBR,0xf6d08651,0x81f,0x18fa8) Setting currdev to disk0p1: Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(2,MBR,0xf6d08651,0x197c7,0x5e6821) Setting currdev to disk0p2: Loading /boot/defaults/loader.conf Loading /boot/device.hints Loading /boot/loader.conf Loading /boot/loader.conf.local Loading kernel... /boot/kernel/kernel text=0x984b4c data=0x190898 data=0x0+0x79d260 syms=[0x8+0x10bdf8+0x8+0x130661] Loading configured modules... /boot/kernel/umodem.ko text=0x2100 text=0x13a0 data=0x6e0+0x10 syms=[0x8+0xf48+0x8+0xb6e] can't find '/boot/entropy' Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... Using DTB provided by EFI at 0x7ef6000. EFI framebuffer information: addr, size 0x3eaf0000, 0x10a800 dimensions 656 x 416 stride 656 masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000 ---<<BOOT>>--- KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-CURRENT #0 r356261: Thu Jan 2 08:30:17 UTC 2020 root@releng1.nyi.freebsd.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64 FreeBSD clang version 9.0.1 (git@github.com:llvm/llvm-project.git c1a0a213378a458fbea1a5c77b315c7dce08fd05) (based on LLVM 9.0.1) WARNING: WITNESS option enabled, expect reduced performance. VT(efifb): resolution 656x416 module firmware already present! KLD file umodem.ko is missing dependencies Starting CPU 1 (1) Starting CPU 2 (2) Starting CPU 3 (3) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. random: entropy device external interface MAP 39f43000 mode 2 pages 1 MAP 39f4c000 mode 2 pages 1 MAP 3b350000 mode 2 pages 16 MAP 3f100000 mode 0 pages 1 WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0. kbd0 at kbdmux0 WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0. ofwbus0: <Open Firmware Device Tree> simplebus0: <Flattened device tree simple bus> on ofwbus0 ofw_clkbus0: <OFW clocks bus> on ofwbus0 clk_fixed0: <Fixed clock> on ofw_clkbus0 clk_fixed1: <Fixed clock> on ofw_clkbus0 regfix0: <Fixed Regulator> on ofwbus0 regfix1: <Fixed Regulator> on ofwbus0 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 lintc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0 intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 48 on simplebus0 gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 24,25 on simplebus0 gpiobus0: <OFW GPIO bus> on gpio0 generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0 Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000 usb_nop_xceiv0: <USB NOP PHY> on ofwbus0 bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21 on simplebus0 Checking root against brcm,bcm2837 bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023 on simplebus0 bcm2835_clkman0: <BCM283x Clock Manager> mem 0x7e101000-0x7e102fff on simplebus0 bcmrng0: <Broadcom BCM2835 RNG> mem 0x7e104000-0x7e10400f irq 22 on simplebus0 mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 23 on simplebus0 gpioc0: <GPIO controller> on gpio0 uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 26 on simplebus0 uart0: console (115200,n,8,1) spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e2041ff irq 28 on simplebus0 spibus0: <OFW SPI bus> on spi0 spibus0: <unknown card> at cs 0 mode 0 spibus0: <unknown card> at cs 1 mode 0 iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 40 on simplebus0 bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 46,47 on simplebus0 usbus0 on bcm283x_dwcotg0 sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 50 on simplebus0 mmc0: <MMC/SD bus> on sdhci_bcm0 fb0: <BCM2835 VT framebuffer driver> on simplebus0 fb0: keeping existing fb bpp of 32 fbd0 on fb0 WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 13.0. VT: Replacing driver "efifb" with new "fb". fb0: 656x416(656x416@0,0) 32bpp fb0: fbswap: 1, pitch 2624, base rx3eaf0000, screen_size 1091584 pmu0: <Performance Monitoring Unit> irq 0 on ofwbus0 cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 bcm2835_cpufreq0: <CPU Frequency Control> on cpu0 cpu1: <Open Firmware CPU> on cpulist0 cpu2: <Open Firmware CPU> on cpulist0 cpu3: <Open Firmware CPU> on cpulist0 gpioled0: <GPIO LEDs> on ofwbus0 gpioled0: <led1> failed to map pin cryptosoft0: <software crypto> intc0: Stray irq 17 disabled Timecounters tick every 1.000 msec Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988 usbus0: 480Mbps High Speed USB v2.0 iicbus0: <OFW I2C bus> on iichb0 iic0: <I2C generic I/O> on iicbus0 ugen0.1: <DWCOTG OTG Root HUB> at usbus0 uhub0 on usbus0 uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 mmcsd0: 126GB <SDHC AcMKS 0.2 SN 40400CB7 MFG 06/2019 by 156 SO> at mmc0 50.0MHz/4bit/65535-block bcm2835_cpufreq0: ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF Release APs...done CPU 0: ARM Cortex-A53 r0p4 affinity: 0 Instruction Set Attributes 0 = <CRC32> Trying to mount root from ufs:/dev/ufs/rootfs [rw]... Instruction Set Attributes 1 = <> Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32> Processor Features 1 = <> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> Memory Model Features 1 = <8bit VMID> Memory Model Features 2 = <32bit CCIDX,48bit VA> Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8> Debug Features 1 = <> Auxiliary Features 0 = <> Auxiliary Features 1 = <> CPU 1: ARM Cortex-A53 r0p4 affinity: 1 CPU 2: ARM Cortex-A53 r0p4 affinity: 2 CPU 3: ARM Cortex-A53 r0p4 affinity: 3 WARNING: WITNESS option enabled, expect reduced performance. Warning: no time-of-day clock registered, system time will not be set accurately Growing root partition to fill device uhub0: 1 port with 1 removable, self powered random: randomdev_wait_until_seeded unblock wait random: unblocking device. GEOM_PART: mmcsd0s2 was automatically resized. Use `gpart commit mmcsd0s2` to save changes or `gpart undo mmcsd0s2` to revert them. mmcsd0s2 resized mmcsd0s2a resized gpart: arg0 'ufs/rootfs': Invalid argument super-block backups (for fsck_ffs -b #) at: 6411392, 7693632, 8975872, 10258112, 11540352, 12822592, 14104832, 15387072, 16669312, 17951552, 19233792, 20516032, 21798272, 23080512, 24362752, 25644992, 26927232, 28209472, 29491712, 30773952, 32056192, 33338432, 34620672, 35902912, 37185152, 38467392, 39749632, 41031872, 42314112, 43596352, 44878592, 46160832, 47443072, 48725312, 50007552, 51289792, 52572032, 53854272, 55136512, 56418752, 57700992, 58983232, 60265472, 61547712, 62829952, 64112192, 65394432, 66676672, 67958912, 69241152, 70523392, 71805632, 73087872, 74370112, 75652352, 76934592, 78216832, 79499072, 80781312, 82063552, 83345792, 84628032, 85910272, 87192512, 88474752, 89756992, 91039232, 92321472, 93603712, 94885952, 96168192, 97450432, 98732672, 100014912, 101297152, 102579392, 103861632, 105143872, 106426112, 107708352, 108990592, 110272832, 111555072, 112837312, 114119552, 115401792, 116684032, 117966272, 119248512, 120530752, 121812992, 123095232, 124377472, 125659712, 126941952, 128224192, 129506432, 130788672, 132070912, 133353152, 134635392, 135917632, 137199872, 138482112, 139764352, 141046592, 142328832, 143611072, 144893312, 146175552, 147457792, 148740032, 150022272, 151304512, 152586752, 153868992, 155151232, 156433472, 157715712, 158997952, 160280192, 161562432, 162844672, 164126912, 165409152, 166691392, 167973632, 169255872, 170538112, 171820352, 173102592, 174384832, 175667072, 176949312, 178231552, 179513792, 180796032, 182078272, 183360512, 184642752, 185924992, 187207232, 188489472, 189771712, 191053952, 192336192, 193618432, 194900672, 196182912, 197465152, 198747392, 200029632, 201311872, 202594112, 203876352, 205158592, 206440832, 207723072, 209005312, 210287552, 211569792, 212852032, 214134272, 215416512, 216698752, 217980992, 219263232, 220545472, 221827712, 223109952, 224392192, 225674432, 226956672, 228238912, 229521152, 230803392, 232085632, 233367872, 234650112, 235932352, 237214592, 238496832, 239779072, 241061312, 242343552, 243625792, 244908032, 246190272 Setting hostuuid: 30303030-3030-3030-6239-333638386637. Setting hostid: 0x837a41df. No suitable dump device was found. Starting file system checks: /dev/ufs/rootfs: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ufs/rootfs: clean, 29174163 free (19 frags, 3646768 blocks, 0.0% fragmentation) Mounting local filesystems:. ELF ldconfig path: /lib /usr/lib /usr/lib/compat Building /boot/kernel/linker.hints Setting hostname: generic. Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED Feeding entropy: . lo0: link state changed to UP Starting Network: lo0. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 groups: lo nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> Starting devd. add host 127.0.0.1: gateway lo0 fib 0: route already in table add host ::1: gateway lo0 fib 0: route already in table add net fe80::: gateway ::1 add net ff02::: gateway ::1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 Generating host.conf. Creating and/or trimming log files. Starting syslogd. Clearing /tmp (X related). Updating motd:. Mounting late filesystems:. Updating /var/run/os-release done. Configuring vt: blanktime. Generating RSA host key. 2048 SHA256:iBKf059ObjTclVB6Nn6ItPH83BD9AdDqhib/1k+w1dM root@generic (RSA) Generating ECDSA host key. 256 SHA256:UdXXAarj5HeWKmjcSk0Vj2MwJLihJYk/Ovw2H9NQ4Wk root@generic (ECDSA) Generating ED25519 host key. 256 SHA256:Kt1YD4GmSgo10zI9lAj0ec3QmHk9sm5cr/ic/oARs+k root@generic (ED25519) Performing sanity check on sshd configuration. Starting sshd. Starting cron. Starting background file system checks in 60 seconds. Thu Jan 2 09:33:45 UTC 2020 FreeBSD/arm64 (generic) (ttyu0) login: root Password: Login incorrect login: root Password: Jan 2 09:33:48 generic login[848]: ROOT LOGIN (root) ON ttyu0 FreeBSD 13.0-CURRENT (GENERIC) #0 r356261: Thu Jan 2 08:30:17 UTC 2020 Welcome to FreeBSD! Release Notes, Errata: https://www.FreeBSD.org/releases/ Security Advisories: https://www.FreeBSD.org/security/ FreeBSD Handbook: https://www.FreeBSD.org/handbook/ FreeBSD FAQ: https://www.FreeBSD.org/faq/ Questions List: https://lists.FreeBSD.org/mailman/listinfo/freebsd-questions/ FreeBSD Forums: https://forums.FreeBSD.org/ Documents installed with the system are in the /usr/local/share/doc/freebsd/ directory, or can be installed later with: pkg install en-freebsd-doc For other languages, replace "en" with a language code like de or fr. Show the version of FreeBSD installed: freebsd-version ; uname -a Please include that output and any error messages when posting questions. Introduction to manual pages: man man FreeBSD directory layout: man hier Edit /etc/motd.template to change this login announcement. root@generic:~ # ifconfig lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 groups: lo nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> root@generic:~ #
From 16:43 to 17:18, its’spent 35 mins to boot and no lo0. --------------------------------------------------------------- root@generic:~ # ifconfig lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 groups: lo nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> root@generic:~ # ------------------------------------------------------------ root@generic:~ # dmesg ---<<BOOT>>--- KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-CURRENT #0 r356261: Thu Jan 2 08:30:17 UTC 2020 root@releng1.nyi.freebsd.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64 FreeBSD clang version 9.0.1 (git@github.com:llvm/llvm-project.git c1a0a213378a458fbea1a5c77b315c7dce08fd05) (based on LLVM 9.0.1) WARNING: WITNESS option enabled, expect reduced performance. VT(efifb): resolution 656x416 module firmware already present! KLD file umodem.ko is missing dependencies Starting CPU 1 (1) Starting CPU 2 (2) Starting CPU 3 (3) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs random: unblocking device. random: entropy device external interface MAP 39f43000 mode 2 pages 1 MAP 39f4c000 mode 2 pages 1 MAP 3b350000 mode 2 pages 16 MAP 3f100000 mode 0 pages 1 WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0. kbd0 at kbdmux0 WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0. ofwbus0: <Open Firmware Device Tree> simplebus0: <Flattened device tree simple bus> on ofwbus0 ofw_clkbus0: <OFW clocks bus> on ofwbus0 clk_fixed0: <Fixed clock> on ofw_clkbus0 clk_fixed1: <Fixed clock> on ofw_clkbus0 regfix0: <Fixed Regulator> on ofwbus0 regfix1: <Fixed Regulator> on ofwbus0 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 lintc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0 intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 48 on simplebus0 gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 24,25 on simplebus0 gpiobus0: <OFW GPIO bus> on gpio0 generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0 Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000 usb_nop_xceiv0: <USB NOP PHY> on ofwbus0 bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21 on simplebus0 Checking root against brcm,bcm2837 bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023 on simplebus0 bcm2835_clkman0: <BCM283x Clock Manager> mem 0x7e101000-0x7e102fff on simplebus0 bcmrng0: <Broadcom BCM2835 RNG> mem 0x7e104000-0x7e10400f irq 22 on simplebus0 mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 23 on simplebus0 gpioc0: <GPIO controller> on gpio0 uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 26 on simplebus0 uart0: console (115200,n,8,1) spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e2041ff irq 28 on simplebus0 spibus0: <OFW SPI bus> on spi0 spibus0: <unknown card> at cs 0 mode 0 spibus0: <unknown card> at cs 1 mode 0 iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 40 on simplebus0 bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 46,47 on simplebus0 usbus0 on bcm283x_dwcotg0 sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 50 on simplebus0 mmc0: <MMC/SD bus> on sdhci_bcm0 fb0: <BCM2835 VT framebuffer driver> on simplebus0 fb0: keeping existing fb bpp of 32 fbd0 on fb0 WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 13.0. VT: Replacing driver "efifb" with new "fb". fb0: 656x416(656x416@0,0) 32bpp fb0: fbswap: 1, pitch 2624, base rx3eaf0000, screen_size 1091584 pmu0: <Performance Monitoring Unit> irq 0 on ofwbus0 cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 bcm2835_cpufreq0: <CPU Frequency Control> on cpu0 cpu1: <Open Firmware CPU> on cpulist0 cpu2: <Open Firmware CPU> on cpulist0 cpu3: <Open Firmware CPU> on cpulist0 gpioled0: <GPIO LEDs> on ofwbus0 gpioled0: <led1> failed to map pin cryptosoft0: <software crypto> intc0: Stray irq 17 disabled Timecounters tick every 1.000 msec Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988 usbus0: 480Mbps High Speed USB v2.0 iicbus0: <OFW I2C bus> on iichb0 iic0: <I2C generic I/O> on iicbus0 ugen0.1: <DWCOTG OTG Root HUB> at usbus0 uhub0 on usbus0 uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 mmcsd0: 126GB <SDHC AcMKS 0.2 SN 40400CB7 MFG 06/2019 by 156 SO> at mmc0 50.0MHz/4bit/65535-block bcm2835_cpufreq0: ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF Release APs...done CPU 0: ARM Cortex-A53 r0p4 affinity: 0 Instruction Set Attributes 0 = <CRC32> Trying to mount root from ufs:/dev/ufs/rootfs [rw]... Instruction Set Attributes 1 = <> Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32> Processor Features 1 = <> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> Memory Model Features 1 = <8bit VMID> Memory Model Features 2 = <32bit CCIDX,48bit VA> Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8> Debug Features 1 = <> Auxiliary Features 0 = <> Auxiliary Features 1 = <> CPU 1: ARM Cortex-A53 r0p4 affinity: 1 CPU 2: ARM Cortex-A53 r0p4 affinity: 2 CPU 3: ARM Cortex-A53 r0p4 affinity: 3 WARNING: WITNESS option enabled, expect reduced performance. Warning: no time-of-day clock registered, system time will not be set accurately uhub0: 1 port with 1 removable, self powered lo0: link state changed to UP root@generic:~ # ifconfig lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 groups: lo nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> root@generic:~ # dmesg ---<<BOOT>>--- KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-CURRENT #0 r356261: Thu Jan 2 08:30:17 UTC 2020 root@releng1.nyi.freebsd.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64 FreeBSD clang version 9.0.1 (git@github.com:llvm/llvm-project.git c1a0a213378a458fbea1a5c77b315c7dce08fd05) (based on LLVM 9.0.1) WARNING: WITNESS option enabled, expect reduced performance. VT(efifb): resolution 656x416 module firmware already present! KLD file umodem.ko is missing dependencies Starting CPU 1 (1) Starting CPU 2 (2) Starting CPU 3 (3) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs random: unblocking device. random: entropy device external interface MAP 39f43000 mode 2 pages 1 MAP 39f4c000 mode 2 pages 1 MAP 3b350000 mode 2 pages 16 MAP 3f100000 mode 0 pages 1 WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0. kbd0 at kbdmux0 WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0. ofwbus0: <Open Firmware Device Tree> simplebus0: <Flattened device tree simple bus> on ofwbus0 ofw_clkbus0: <OFW clocks bus> on ofwbus0 clk_fixed0: <Fixed clock> on ofw_clkbus0 clk_fixed1: <Fixed clock> on ofw_clkbus0 regfix0: <Fixed Regulator> on ofwbus0 regfix1: <Fixed Regulator> on ofwbus0 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 lintc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0 intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 48 on simplebus0 gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 24,25 on simplebus0 gpiobus0: <OFW GPIO bus> on gpio0 generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0 Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000 usb_nop_xceiv0: <USB NOP PHY> on ofwbus0 bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21 on simplebus0 Checking root against brcm,bcm2837 bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023 on simplebus0 bcm2835_clkman0: <BCM283x Clock Manager> mem 0x7e101000-0x7e102fff on simplebus0 bcmrng0: <Broadcom BCM2835 RNG> mem 0x7e104000-0x7e10400f irq 22 on simplebus0 mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 23 on simplebus0 gpioc0: <GPIO controller> on gpio0 uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 26 on simplebus0 uart0: console (115200,n,8,1) spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e2041ff irq 28 on simplebus0 spibus0: <OFW SPI bus> on spi0 spibus0: <unknown card> at cs 0 mode 0 spibus0: <unknown card> at cs 1 mode 0 iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 40 on simplebus0 bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 46,47 on simplebus0 usbus0 on bcm283x_dwcotg0 sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 50 on simplebus0 mmc0: <MMC/SD bus> on sdhci_bcm0 fb0: <BCM2835 VT framebuffer driver> on simplebus0 fb0: keeping existing fb bpp of 32 fbd0 on fb0 WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 13.0. VT: Replacing driver "efifb" with new "fb". fb0: 656x416(656x416@0,0) 32bpp fb0: fbswap: 1, pitch 2624, base rx3eaf0000, screen_size 1091584 pmu0: <Performance Monitoring Unit> irq 0 on ofwbus0 cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 bcm2835_cpufreq0: <CPU Frequency Control> on cpu0 cpu1: <Open Firmware CPU> on cpulist0 cpu2: <Open Firmware CPU> on cpulist0 cpu3: <Open Firmware CPU> on cpulist0 gpioled0: <GPIO LEDs> on ofwbus0 gpioled0: <led1> failed to map pin cryptosoft0: <software crypto> intc0: Stray irq 17 disabled Timecounters tick every 1.000 msec Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988 usbus0: 480Mbps High Speed USB v2.0 iicbus0: <OFW I2C bus> on iichb0 iic0: <I2C generic I/O> on iicbus0 ugen0.1: <DWCOTG OTG Root HUB> at usbus0 uhub0 on usbus0 uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 mmcsd0: 126GB <SDHC AcMKS 0.2 SN 40400CB7 MFG 06/2019 by 156 SO> at mmc0 50.0MHz/4bit/65535-block bcm2835_cpufreq0: ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF Release APs...done CPU 0: ARM Cortex-A53 r0p4 affinity: 0 Instruction Set Attributes 0 = <CRC32> Trying to mount root from ufs:/dev/ufs/rootfs [rw]... Instruction Set Attributes 1 = <> Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32> Processor Features 1 = <> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> Memory Model Features 1 = <8bit VMID> Memory Model Features 2 = <32bit CCIDX,48bit VA> Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8> Debug Features 1 = <> Auxiliary Features 0 = <> Auxiliary Features 1 = <> CPU 1: ARM Cortex-A53 r0p4 affinity: 1 CPU 2: ARM Cortex-A53 r0p4 affinity: 2 CPU 3: ARM Cortex-A53 r0p4 affinity: 3 WARNING: WITNESS option enabled, expect reduced performance. Warning: no time-of-day clock registered, system time will not be set accurately uhub0: 1 port with 1 removable, self powered lo0: link state changed to UP root@generic:~ # ------------------------------------------------------------------
This is due to incompatibilities with new DTB from Raspberry Pi developers and FreeBSD kernel. I had installed FreeBSD to SD card using "well-known" procedure, built u-boot and rpi-firmware from ports and just have updated contents of MS DOS boot partition of my SD card. All boot loader stages work well, but kernel stucks on intc0: Stray irq 17 disabled Rolling back DTB to that one which can be found on installation media resolves kernel boot stuck issue.