Hello all, we face strange and bad situation. We have HBA LSI 9300 - SAS3008. One SSD WDC( 14T SAS ) server grade is working fine with it( 300-500 MB/sec ) but the new one SSD SAMSUNG( 14T SAS ) server grade is very slow ( max 20 MB/sec ). When we change that HBA with Areca in JBOD/HBA mode we can get 300-500MB/sec from both SSDs. This is the same for FreeBSD 12.2 and FreeBSD 12.3 We try SAS3808/SAS3818 with other SSD SAMSUNG ( 8T SATA ) server grade on FreeBSD12.3 and we can get max 20 MB/sec. Today we have received Adaptec 1100-8i. We this HBA we can get maximum 90MB/sec from SSD WDC ( 14T SAS ) and 15-20MB/sec with SSD SAMSUNG ( 14T SAS ). So mpr and smarpqi are working slow, but arcmsr is just fine .. It seems there are changes in the kernel but they are not applied to the drivers ? If you need more info and details just list them Cheers Rumen
Hello again, When we disable zfs trim: vfs.zfs.trim.enabled=0 both SSDs are performing on their best speed. How the zfs trim affects the performance in such dramatic way ?