USB messages at g6e414739fc95 rk_usb2phy0: <Rockchip USB2PHY> mem 0xfe8a0000-0xfe8affff irq 76 on ofwbus0 Clock: clk_usbphy0_480m, parent: clk_usbphy0_ref(0), freq: 480000000 rk_usb2phy1: <Rockchip USB2PHY> mem 0xfe8b0000-0xfe8bffff irq 77 on ofwbus0 Clock: clk_usbphy1_480m, parent: clk_usbphy1_ref(0), freq: 480000000 snps_dwc3_fdt0: <Synopsys Designware DWC3> mem 0xfcc00000-0xfcffffff irq 10 on ofwbus0 snps_dwc3_fdt0: SNPS Version: DWC3 (5533 300a) snps_dwc3_fdt0: 64 bytes context size, 32-bit DMA usbus0: trying to attach usbus0 on snps_dwc3_fdt0 snps_dwc3_fdt0: usbpf: Attached snps_dwc3_fdt1: <Synopsys Designware DWC3> mem 0xfd000000-0xfd3fffff irq 11 on ofwbus0 snps_dwc3_fdt1: SNPS Version: DWC3 (5533 300a) rk3568_combphy0: configuring for USB3 ref_clk=25000000 snps_dwc3_fdt1: 64 bytes context size, 32-bit DMA usbus1: trying to attach usbus1 on snps_dwc3_fdt1 snps_dwc3_fdt1: usbpf: Attached ehci0: <Generic EHCI Controller> mem 0xfd800000-0xfd83ffff irq 13 on ofwbus0 usbus2: EHCI version 1.0 usbus2 on ehci0 ehci0: usbpf: Attached ohci0: <Generic OHCI Controller> mem 0xfd840000-0xfd87ffff irq 14 on ofwbus0 usbus3 on ohci0 ohci0: usbpf: Attached ehci1: <Generic EHCI Controller> mem 0xfd880000-0xfd8bffff irq 15 on ofwbus0 usbus4: EHCI version 1.0 usbus4 on ehci1 ehci1: usbpf: Attached ohci1: <Generic OHCI Controller> mem 0xfd8c0000-0xfd8fffff irq 16 on ofwbus0 usbus5 on ohci1 ohci1: usbpf: Attached usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 5.0Gbps Super Speed USB v3.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 usbus5: 12Mbps Full Speed USB v1.0 ugen3.1: <Generic OHCI root HUB> at usbus3 uhub0 on usbus3 uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen2.1: <Generic EHCI root HUB> at usbus2 uhub1 on usbus2 uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen5.1: <Generic OHCI root HUB> at usbus5 uhub2 on usbus5 uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen4.1: <Generic EHCI root HUB> at usbus4 uhub3 on usbus4 uhub3: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 ugen1.1: <Synopsys XHCI root HUB> at usbus1 uhub4 on usbus1 uhub4: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 ugen0.1: <Synopsys XHCI root HUB> at usbus0 uhub5 on usbus0 uhub5: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub0: 1 port with 1 removable, self powered uhub2: 1 port with 1 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub1: 1 port with 1 removable, self powered uhub3: 1 port with 1 removable, self powered usb_alloc_device: set address 2 failed (USB_ERR_IOERROR, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR ugen3.2: <Unknown > at usbus3 (disconnected) uhub_reattach_port: could not allocate new device usbconfig with no USB devices connected reports: # usbconfig ugen3.1: <Generic OHCI root HUB> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA) ugen2.1: <Generic EHCI root HUB> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen5.1: <Generic OHCI root HUB> at usbus5, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA) ugen4.1: <Generic EHCI root HUB> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen1.1: <Synopsys XHCI root HUB> at usbus1, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) ugen0.1: <Synopsys XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) #