newfs on 2.6TB gbde disk fails, while newfs on the same 2.6TB disk finishes fine How-To-Repeat: Given the disk (from Simbolo Proware ide-to-scsi array): da2: <SB-3160S Volume Set # 00 R001> Fixed Direct Access SCSI-3 device da2: 160.000MB/s transfers (80.000MHz, offset 62, 16bit), Tagged Queueing Enabled da2: 2670286MB (5468746752 512 byte sectors: 255H 63S/T 340413C) newfs /dev/da2 works without a problem, while following steps fail: gbde init /dev/da2 gbde attach da2 newfs /dev/da2.bde /dev/da2.bde: 2589368.7MB (5303027136 sectors) block size 16384, fragment size 2048 using 14091 cylinder groups of 183.77MB, 11761 blks, 23552 inodes. super-block backups (for fsck -b #) at: 160, 376512, 752864, 1129216, 1505568, [...few pages omitted...] 4159442464, 4159818816, 4160195168, 4160571520, 4160947872, 4161324224, 4161700576, 4162076928, 4162453280, 4162829632, 4163205984, 4163582336, 4163958688, 4164335040,newfs: wtfs: 65536 bytes at sector 4164711392: Input/output error
Responsible Changed From-To: freebsd-bugs->freebsd-geom over to GEOM mailinglist