Bug 88279 - Hme driver. Failure to initialize onboard NA on Sun Enterprise 250
Summary: Hme driver. Failure to initialize onboard NA on Sun Enterprise 250
Status: Closed FIXED
Alias: None
Product: Base System
Classification: Unclassified
Component: sparc64 (show other bugs)
Version: Unspecified
Hardware: Any Any
: Normal Affects Only Me
Assignee: Marius Strobl
URL:
Keywords:
Depends on:
Blocks:
 
Reported: 2005-10-31 16:50 UTC by Simon Rigét
Modified: 2006-01-23 16:59 UTC (History)
0 users

See Also:

Attachments
Add an attachment (proposed patch, testcase, etc.)

Note You need to log in before you can comment on or make changes to this bug.
Description Simon Rigét 2005-10-31 16:50:16 UTC 
The driver for hme fails to initialize the build in network adapter, on boot, with the following messages:

hme0: <Sun HME 10/100 Ethernet> mem 0x8000-0xffff at device 1.1 on pci0
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: Ethernet address: 08:00:20:e6:87:de
hme0: couldn't establish interrupt

there is also this:

stray vector interrupt 2029

Which I suspect is related.

The device has been tested with a Solaris 9 installation and works fine.
I also tested with FreeBSD 6.0 RC1: same fault.

Full message log:

Oct 31 16:14:05 thor kernel: stray vector interrupt 2029
Oct 31 16:14:05 thor kernel: Copyright (c) 1992-2005 The FreeBSD Project.
Oct 31 16:14:05 thor kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Oct 31 16:14:05 thor kernel: The Regents of the University of California. All rights reserved.
Oct 31 16:14:05 thor kernel: FreeBSD 5.4-RELEASE #0: Sun May  8 22:21:34 UTC 2005
Oct 31 16:14:05 thor kernel: root@binkley.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Oct 31 16:14:06 thor kernel: real memory  = 2147483648 (2048 MB)
Oct 31 16:14:06 thor kernel: avail memory = 2082840576 (1986 MB)
Oct 31 16:14:06 thor kernel: cpu0: Sun Microsystems UltraSparc-II Processor (400.00 MHz CPU)
Oct 31 16:14:06 thor kernel: cpu1: Sun Microsystems UltraSparc-II Processor (400.00 MHz CPU)
Oct 31 16:14:06 thor kernel: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
Oct 31 16:14:06 thor kernel: nexus0: <Open Firmware Nexus device>
Oct 31 16:14:06 thor kernel: nexus0: <associations>, type (unknown) (no driver attached)
Oct 31 16:14:06 thor kernel: pcib0: <U2P UPA-PCI bridge> on nexus0
Oct 31 16:14:06 thor kernel: pcib0: Psycho, impl 0, version 4, ign 0x7c0, bus B
Oct 31 16:14:06 thor kernel: initializing counter-timer
Oct 31 16:14:06 thor kernel: Timecounter "counter-timer" frequency 1000000 Hz quality 100
Oct 31 16:14:06 thor kernel: pcib0 dvma: DVMA map: 0xfc000000 to 0xffffffff
Oct 31 16:14:06 thor kernel: pci0: <OFW PCI bus> on pcib0
Oct 31 16:14:06 thor kernel: ebus0: <PCI-EBus2 bridge> mem 0x71000000-0x717fffff,0x70000000-0x70ffffff at device 1.0 on pci0
Oct 31 16:14:06 thor kernel: auxio0: <Sun Auxiliary I/O> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 on ebus0
Oct 31 16:14:06 thor kernel: ebus0: <power> addr 0x1400724000-0x1400724003 (no driver attached)
Oct 31 16:14:06 thor kernel: ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
Oct 31 16:14:06 thor kernel: ebus0: <sc> addr 0x1400500000-0x1400500007 (no driver attached)
Oct 31 16:14:06 thor kernel: puc0: <Siemens SAB 82532 dual channel SCC> addr 0x1400400000-0x140040007f irq 43 on ebus0
Oct 31 16:14:06 thor kernel: uart0: <SAB 82532 v3.2, channel A> on puc0
Oct 31 16:14:06 thor kernel: uart0: CTS oflow
Oct 31 16:14:06 thor kernel: uart0: console (9600,n,8,1)
Oct 31 16:14:06 thor kernel: uart1: <SAB 82532 v3.2, channel B> on puc0
Oct 31 16:14:06 thor kernel: uart1: CTS oflow
Oct 31 16:14:06 thor kernel: puc1: <Siemens SAB 82532 dual channel SCC> addr 0x1400200000-0x140020007f irq 35 on ebus0
Oct 31 16:14:06 thor kernel: uart2: <SAB 82532 v3.2, channel A> on puc1
Oct 31 16:14:06 thor kernel: uart2: CTS oflow
Oct 31 16:14:06 thor kernel: uart3: <SAB 82532 v3.2, channel B> on puc1
Oct 31 16:14:06 thor kernel: uart3: CTS oflow
Oct 31 16:14:06 thor kernel: uart4: <16550 or compatible> addr 0x14003083f8-0x14003083ff irq 41 on ebus0
Oct 31 16:14:06 thor kernel: uart5: <16550 or compatible> addr 0x14003062f8-0x14003062ff irq 33 on ebus0
Oct 31 16:14:06 thor kernel: ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x1400300398-0x1400300399,0x14003043bc-0x14003043cb irq 33 (no driver attached)
Oct 31 16:14:06 thor kernel: eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
Oct 31 16:14:06 thor kernel: eeprom0: model mk48t59
Oct 31 16:14:06 thor kernel: eeprom0: hostid 80e687de
Oct 31 16:14:06 thor kernel: ebus0: <flashprom> addr 0x1000000000-0x10000fffff,0x1000000000-0x10000fffff (no driver attached)
Oct 31 16:14:06 thor kernel: ebus0: <SUNW,envctrltwo> addr 0x1400600000-0x1400600003 irq 37,40 (no driver attached)
Oct 31 16:14:06 thor kernel: hme0: <Sun HME 10/100 Ethernet> mem 0x8000-0xffff at device 1.1 on pci0
Oct 31 16:14:06 thor kernel: miibus0: <MII bus> on hme0
Oct 31 16:14:06 thor kernel: nsphy0: <DP83840 10/100 media interface> on miibus0
Oct 31 16:14:06 thor kernel: nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Oct 31 16:14:06 thor kernel: hme0: Ethernet address: 08:00:20:e6:87:de
Oct 31 16:14:06 thor kernel: hme0: couldn't establish interrupt
Oct 31 16:14:06 thor kernel: nsphy0: detached
Oct 31 16:14:06 thor kernel: miibus0: detached
Oct 31 16:14:06 thor kernel: device_attach: hme0 attach returned 22
Oct 31 16:14:06 thor kernel: sym0: <875> port 0x400-0x4ff mem 0x12000-0x12fff,0x10000-0x100ff at device 3.0 on pci0
Oct 31 16:14:06 thor kernel: sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
Oct 31 16:14:06 thor kernel: sym1: <875> port 0x800-0x8ff mem 0x16000-0x16fff,0x14000-0x140ff at device 3.1 on pci0
Oct 31 16:14:06 thor kernel: sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
Oct 31 16:14:06 thor kernel: pci0: <display> at device 2.0 (no driver attached)
Oct 31 16:14:06 thor kernel: xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xc00-0xc7f mem 0x1800000-0x180007f at device 5.0 on pci0
Oct 31 16:14:06 thor kernel: miibus0: <MII bus> on xl0
Oct 31 16:14:06 thor kernel: xlphy0: <3Com internal media interface> on miibus0
Oct 31 16:14:06 thor kernel: xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Oct 31 16:14:06 thor kernel: xl0: Ethernet address: 00:50:da:79:fb:1f
Oct 31 16:14:06 thor kernel: pcib1: <U2P UPA-PCI bridge> on nexus0
Oct 31 16:14:06 thor kernel: pcib1: Psycho, impl 0, version 4, ign 0x7c0, bus A
Oct 31 16:14:06 thor kernel: pci1: <OFW PCI bus> on pcib1
Oct 31 16:14:06 thor kernel: gem0: <Sun GEM Gigabit Ethernet Adaptor> mem 0x200000-0x3fffff at device 1.0 on pci1
Oct 31 16:14:06 thor kernel: gem0: phy probe failed: 6
Oct 31 16:14:06 thor kernel: gem0: could not be configured
Oct 31 16:14:06 thor kernel: device_attach: gem0 attach returned 6
Oct 31 16:14:06 thor kernel: nexus0: <rsc>, type system-service-processor (no driver attached)
Oct 31 16:14:06 thor kernel: nexus0: <mc>, type memory-controller (no driver attached)
Oct 31 16:14:06 thor kernel: Timecounters tick every 10.000 msec
Oct 31 16:14:06 thor kernel: Waiting 15 seconds for SCSI devices to settle
Oct 31 16:14:06 thor kernel: SMP: AP CPU #1 Launched!
Oct 31 16:14:06 thor kernel: cd0 at sym0 bus 0 target 6 lun 0
Oct 31 16:14:06 thor kernel: cd0: <TOSHIBA DVD-ROM SD-M1401 1007> Removable CD-ROM SCSI-2 device
Oct 31 16:14:06 thor kernel: cd0: 20.000MB/s transfers (20.000MHz, offset 16)
Oct 31 16:14:06 thor kernel: cd0: cd present [1025240 x 512 byte records]
Oct 31 16:14:06 thor kernel: da0 at sym0 bus 0 target 8 lun 0
Oct 31 16:14:06 thor kernel: da0: <SEAGATE ST336704LSUN36G 0326> Fixed Direct Access SCSI-3 device
Oct 31 16:14:06 thor kernel: da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled
Oct 31 16:14:06 thor kernel: da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
Oct 31 16:14:06 thor kernel: Mounting root from ufs:/dev/da0a

How-To-Repeat: Fresh clean binary install and ever after.
Comment 1 marius 2005-10-31 17:34:33 UTC 
On Mon, Oct 31, 2005 at 04:49:04PM +0000, Simon Rigét wrote:
> 
> >Description:
> The driver for hme fails to initialize the build in network adapter, on boot, with the following messages:
> 
> hme0: <Sun HME 10/100 Ethernet> mem 0x8000-0xffff at device 1.1 on pci0
> miibus0: <MII bus> on hme0
> nsphy0: <DP83840 10/100 media interface> on miibus0
> nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> hme0: Ethernet address: 08:00:20:e6:87:de
> hme0: couldn't establish interrupt
> 

The underlying problem is an incorrect entry for the second on-board
UART in the interrupt map provided by the firmware which further down
the road causes hme(4) to fail to attach to the on-board HME.
6.0-RELEASE will contain a hack to work around the problem (already
part of RELENG_6 and RELENG_6_0) and a proper solution is being worked
on.

> there is also this:
> 
> stray vector interrupt 2029
> 
> Which I suspect is related.

That's the interrupt of the second timer embedded in the Host-PCI
bridge which is set up by the firmware and typically fires before
FreeBSD can disable it. Read: unrelated and harmless.

Marius

-- 
This mail was scanned by AntiVir Milter.
This product is licensed for non-commercial use.
See www.antivir.de for details.
Comment 2 Marius Strobl freebsd_committer freebsd_triage 2005-11-22 22:35:50 UTC 
State Changed
From-To: open->patched


Mark as patched (fixed in sys/sparc64/pci/psycho.c rev. 1.55), assign 
to me as MFC-reminder.
Comment 3 Marius Strobl freebsd_committer freebsd_triage 2005-11-22 22:35:50 UTC 
Responsible Changed
From-To: freebsd-sparc64->marius


Mark as patched (fixed in sys/sparc64/pci/psycho.c rev. 1.55), assign    
to me as MFC-reminder.
Comment 4 Marius Strobl freebsd_committer freebsd_triage 2006-01-23 16:57:32 UTC 
State Changed
From-To: patched->closed


Close, fix was MFC'ed to RELENG_6 in sys/sparc64/pci/psycho.c rev. 1.53.2.1 
and to RELENG_5 in rev. 1.52.2.2.