After ~15 boot operations, the kernel has stopped after: -------------------------------------------------------- Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-RELEASE #0: Sat May 13 08:45:34 CEST 2006 root@fbsd.lokal.biz:/usr/src/sys/i386/compile/BSD61 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (701.59-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 805224448 (767 MB) avail memory = 779456512 (743 MB) acpi0: <ASUS P3B_F> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 drm0: <Matrox G550 (AGP)> mem 0xde000000-0xdfffffff,0xdd000000-0xdd003fff,0xdc800000-0xdcffffff irq 11 at device 0.0 on pci1 info: [drm] AGP at 0xe0000000 128MB info: [drm] Initialized mga 3.2.1 20051102 isab0: <PCI-ISA bridge> at device 4.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd800-0xd80f at device 4.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd400-0xd41f irq 5 at device 4.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge> at device 4.3 (no driver attached) xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd000-0xd07f mem 0xdc000000-0xdc00007f irq 10 at device 10.0 on pci0 miibus0: <MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:04:76:17:7c:ae fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse Explorer, device ID 4 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xcc000-0xcc7ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 701594160 Hz quality 800 Timecounters tick every 1.000 msec ad0: 76319MB <WDC WD800JB-00CRA1 17.07W17> at ata0-master UDMA33 ad1: 152627MB <WDC WD1600JB-00GVC0 08.02D08> at ata0-slave UDMA33 acd0: CDRW <TEAC CD-W552E/1.14> at ata1-master UDMA33 afd0: (no media) <IOMEGA ZIP 100 ATAPI Floppy 14.A> at ata1-slave PIO0 cd0 at ata1 bus 0 target 0 lun 0 cd0: <TEAC CD-W552E 1.14> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present da0 at ata1 bus 0 target 1 lun 0 da0: <IOMEGA ZIP 100 14.A> Removable Direct Access SCSI-0 device da0: 3.300MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present Opened disk afd0 -> 6 Opened disk afd0 -> 6 Opened disk afd0 -> 6 (da0:ata1:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:ata1:0:1:0): CAM Status: SCSI Status Error (da0:ata1:0:1:0): SCSI Status: Check Condition (da0:ata1:0:1:0): NOT READY asc:3a,0 (da0:ata1:0:1:0): Medium not present (da0:ata1:0:1:0): Unretryable error Opened disk da0 -> 6 (da0:ata1:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:ata1:0:1:0): CAM Status: SCSI Status Error (da0:ata1:0:1:0): SCSI Status: Check Condition (da0:ata1:0:1:0): NOT READY asc:3a,0 (da0:ata1:0:1:0): Medium not present (da0:ata1:0:1:0): Unretryable error Opened disk da0 -> 6 (da0:ata1:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:ata1:0:1:0): CAM Status: SCSI Status Error (da0:ata1:0:1:0): SCSI Status: Check Condition (da0:ata1:0:1:0): NOT READY asc:3a,0 (da0:ata1:0:1:0): Medium not present (da0:ata1:0:1:0): Unretryable error Opened disk da0 -> 6 (Trying to mount root from ufs:/dev/ad0s2a)? ---------------------------------------------- The led light of the floppy disc was on permanently. That is not normal. I have waited about 5 minutes ... hardware-reset. This event happened only one time. I have booted 2 times successfully since this event. How-To-Repeat: One event only.
State Changed From-To: open->feedback Was there a media in the drive, that was not recognized?
No media - the led light was on until hw-reset, switched on by the kernel! Because this state I wrote the PR. -- Mit freundlichen Grüßen Helmut Schellong var@schellong.biz www.schellong.de www.schellong.com www.schellong.biz http://www.schellong.de/c.htm
State Changed From-To: feedback->open Note that feedback was received some time back. To submitter: does this problem still recur?
No, only one event; I have 6.2 installed.
State Changed From-To: open->suspended This only happened one time, and since it can't be reproduced right now, it's going to be hard to diagnose. Mark suspended for now.
There is not enough information to analyze given issue, and because of bug age, receiving additional information is difficult. Moreover, used FreeBSD version is no longer supported.