Previously reported this as PR98003, but was informed that it was a duplicate - no previous PR # supplied in PR close report. Searched freebsd-ports mailing list and found PR97781 which was closed as "Duplicate" no further comments. Searched again and eventually found PR97121, which suggested that the fix was to "You should remove and rebuild php(-pcre)". I have done the following: cd /usr/ports/lang/php5-extensions/ make deinstall clean make config (selected extensions required) make install clean The reinstallation fails as follows still: Note that I've included as much of the build output so as to illustrate what was done, and where the build fails accordingly: /usr/bin/install -c -o root -g wheel .libs/libodbcpsql.so.1 /usr/local/lib/libodbcpsql.so.1 (cd /usr/local/lib && rm -f libodbcpsql.so && ln -s libodbcpsql.so.1 libodbcpsql.so) (cd /usr/local/lib && rm -f libodbcpsql.so && ln -s libodbcpsql.so.1 libodbcpsql.so) /usr/bin/install -c -o root -g wheel .libs/libodbcpsql.lai /usr/local/lib/libodbcpsql.la /usr/bin/install -c -o root -g wheel .libs/libodbcpsql.a /usr/local/lib/libodbcpsql.a ranlib /usr/local/lib/libodbcpsql.a chmod 644 /usr/local/lib/libodbcpsql.a ---------------------------------------------------------------------- Libraries have been installed in: /usr/local/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- Making install in Postgre7.1 /bin/sh ../../mkinstalldirs /usr/local/lib /bin/sh ../../libtool --mode=install /usr/bin/install -c -o root -g wheel libodbcpsql.la /usr/local/lib/libodbcpsql.la /usr/bin/install -c -o root -g wheel .libs/libodbcpsql.so.2 /usr/local/lib/libodbcpsql.so.2 (cd /usr/local/lib && rm -f libodbcpsql.so && ln -s libodbcpsql.so.2 libodbcpsql.so) (cd /usr/local/lib && rm -f libodbcpsql.so && ln -s libodbcpsql.so.2 libodbcpsql.so) /usr/bin/install -c -o root -g wheel .libs/libodbcpsql.lai /usr/local/lib/libodbcpsql.la /usr/bin/install -c -o root -g wheel .libs/libodbcpsql.a /usr/local/lib/libodbcpsql.a ranlib /usr/local/lib/libodbcpsql.a chmod 644 /usr/local/lib/libodbcpsql.a ---------------------------------------------------------------------- Libraries have been installed in: /usr/local/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- Making install in txt Making install in doc /bin/sh ../../mkinstalldirs /usr/local/lib /bin/sh ../../libtool --mode=install /usr/bin/install -c -o root -g wheel libodbctxt.la /usr/local/lib/libodbctxt.la /usr/bin/install -c -o root -g wheel .libs/libodbctxt.so.1 /usr/local/lib/libodbctxt.so.1 (cd /usr/local/lib && rm -f libodbctxt.so && ln -s libodbctxt.so.1 libodbctxt.so) (cd /usr/local/lib && rm -f libodbctxt.so && ln -s libodbctxt.so.1 libodbctxt.so) /usr/bin/install -c -o root -g wheel .libs/libodbctxt.lai /usr/local/lib/libodbctxt.la /usr/bin/install -c -o root -g wheel .libs/libodbctxt.a /usr/local/lib/libodbctxt.a ranlib /usr/local/lib/libodbctxt.a chmod 644 /usr/local/lib/libodbctxt.a ---------------------------------------------------------------------- Libraries have been installed in: /usr/local/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- Making install in odbc Making install in template /bin/sh ../../mkinstalldirs /usr/local/lib /bin/sh ../../libtool --mode=install /usr/bin/install -c -o root -g wheel libtemplate.la /usr/local/lib/libtemplate.la /usr/bin/install -c -o root -g wheel .libs/libtemplate.so.1 /usr/local/lib/libtemplate.so.1 (cd /usr/local/lib && rm -f libtemplate.so && ln -s libtemplate.so.1 libtemplate.so) (cd /usr/local/lib && rm -f libtemplate.so && ln -s libtemplate.so.1 libtemplate.so) /usr/bin/install -c -o root -g wheel .libs/libtemplate.lai /usr/local/lib/libtemplate.la /usr/bin/install -c -o root -g wheel .libs/libtemplate.a /usr/local/lib/libtemplate.a ranlib /usr/local/lib/libtemplate.a chmod 644 /usr/local/lib/libtemplate.a ---------------------------------------------------------------------- Libraries have been installed in: /usr/local/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- Making install in MiniSQL /bin/sh ../../mkinstalldirs /usr/local/lib Making install in nn /bin/sh ../../mkinstalldirs /usr/local/lib /bin/sh ../../libtool --mode=install /usr/bin/install -c -o root -g wheel libnn.la /usr/local/lib/libnn.la /usr/bin/install -c -o root -g wheel .libs/libnn.so.1 /usr/local/lib/libnn.so.1 (cd /usr/local/lib && rm -f libnn.so && ln -s libnn.so.1 libnn.so) (cd /usr/local/lib && rm -f libnn.so && ln -s libnn.so.1 libnn.so) /usr/bin/install -c -o root -g wheel .libs/libnn.lai /usr/local/lib/libnn.la /usr/bin/install -c -o root -g wheel .libs/libnn.a /usr/local/lib/libnn.a ranlib /usr/local/lib/libnn.a chmod 644 /usr/local/lib/libnn.a ---------------------------------------------------------------------- Libraries have been installed in: /usr/local/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- Making install in include /bin/sh ../mkinstalldirs /usr/local/include install -o root -g wheel -m 444 odbcinst.h /usr/local/include/odbcinst.h install -o root -g wheel -m 444 odbcinstext.h /usr/local/include/odbcinstext.h install -o root -g wheel -m 444 sql.h /usr/local/include/sql.h install -o root -g wheel -m 444 sqlext.h /usr/local/include/sqlext.h install -o root -g wheel -m 444 sqltypes.h /usr/local/include/sqltypes.h install -o root -g wheel -m 444 sqlucode.h /usr/local/include/sqlucode.h install -o root -g wheel -m 444 uodbc_stats.h /usr/local/include/uodbc_stats.h install -o root -g wheel -m 444 autotest.h /usr/local/include/autotest.h Making install in doc Making install in AdministratorManual Making install in ProgrammerManual Making install in Tutorial Making install in UserManual Making install in lst Making install in ODBCConfig /bin/sh ../mkinstalldirs /usr/local/bin Making install in DataManager /bin/sh ../mkinstalldirs /usr/local/bin Making install in DataManagerII /bin/sh ../mkinstalldirs /usr/local/bin Making install in odbctest /bin/sh ../mkinstalldirs /usr/local/bin Making install in autotest /bin/sh ../mkinstalldirs /usr/local/lib /bin/sh ../libtool --mode=install /usr/bin/install -c -o root -g wheel libgtrtst.la /usr/local/lib/libgtrtst.la /usr/bin/install -c -o root -g wheel .libs/libgtrtst.so.1 /usr/local/lib/libgtrtst.so.1 (cd /usr/local/lib && rm -f libgtrtst.so && ln -s libgtrtst.so.1 libgtrtst.so) (cd /usr/local/lib && rm -f libgtrtst.so && ln -s libgtrtst.so.1 libgtrtst.so) /usr/bin/install -c -o root -g wheel .libs/libgtrtst.lai /usr/local/lib/libgtrtst.la /usr/bin/install -c -o root -g wheel .libs/libgtrtst.a /usr/local/lib/libgtrtst.a ranlib /usr/local/lib/libgtrtst.a chmod 644 /usr/local/lib/libgtrtst.a ---------------------------------------------------------------------- Libraries have been installed in: /usr/local/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- Making install in samples /bin/sh ../mkinstalldirs /usr/local/lib /bin/sh ../libtool --mode=install /usr/bin/install -c -o root -g wheel libboundparam.la /usr/local/lib/libboundparam.la libtool: install: warning: relinking `libboundparam.la' cd /usr/ports/databases/unixODBC/work/unixODBC-2.2.11/samples; /bin/sh ../libtool --mode=relink cc -O -pipe -march=pentium3 -pthread -L/usr/local/lib -o libboundparam.la -rpath /usr/local/lib -version-info 1:0:0 -export-dynamic -module boundparam.lo helper.lo cboundtimestampparam.lo ../autotest/libgtrtstlc.la ../DriverManager/libodbc.la -pthread cc -shared boundparam.lo helper.lo cboundtimestampparam.lo -Wl,--whole-archive ../autotest/.libs/libgtrtstlc.al -Wl,--no-whole-archive -Wl,--rpath -Wl,/usr/local/lib -L/usr/local/lib ../autotest/.libs/libgtrtstlc.al -lodbc -lc -Wl,-soname -Wl,libboundparam.so.1 -o .libs/libboundparam.so.1 /usr/bin/install -c -o root -g wheel .libs/libboundparam.so.1T /usr/local/lib/libboundparam.so.1 (cd /usr/local/lib && rm -f libboundparam.so && ln -s libboundparam.so.1 libboundparam.so) (cd /usr/local/lib && rm -f libboundparam.so && ln -s libboundparam.so.1 libboundparam.so) /usr/bin/install -c -o root -g wheel .libs/libboundparam.lai /usr/local/lib/libboundparam.la /usr/bin/install -c -o root -g wheel .libs/libboundparam.a /usr/local/lib/libboundparam.a ranlib /usr/local/lib/libboundparam.a chmod 644 /usr/local/lib/libboundparam.a ---------------------------------------------------------------------- Libraries have been installed in: /usr/local/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- touch /usr/local/etc/odbcinst.ini touch /usr/local/etc/odbc.ini mkdir -p /usr/local/etc/ODBCDataSources /usr/bin/tar -C /usr/ports/databases/unixODBC/work/unixODBC-2.2.11/doc --exclude '*Makefile*' -cf - . | /usr/bin/tar -C /usr/local/share/doc/unixODBC --unlink -xf - ===> Running ldconfig /sbin/ldconfig -m /usr/local/lib ===> Registering installation for unixODBC-2.2.11_1 ===> Returning to build of php5-odbc-5.1.4 ===> PHPizing for php5-odbc-5.1.4 Configuring for: PHP Api Version: 20041225 Zend Module Api No: 20050922 Zend Extension Api No: 220051025 ===> Configuring for php5-odbc-5.1.4 configure: WARNING: you should use --build, --host, --target checking for egrep... grep -E checking for a sed that does not truncate output... /usr/bin/sed checking for i386-portbld-freebsd6.0-gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ANSI C... none needed checking whether cc understands -c and -o together... yes checking if compiler supports -R... yes checking build system type... i386-portbld-freebsd6.0 checking host system type... i386-portbld-freebsd6.0 checking target system type... i386-portbld-freebsd6.0 checking for PHP prefix... /usr/local checking for PHP includes... -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext checking for PHP extension directory... /usr/local/lib/php/20050922 checking for PHP installed headers prefix... /usr/local/include/php checking for re2c... no configure: WARNING: You will need re2c 0.9.11 or later if you want to regenerate PHP parsers. checking for gawk... no checking for nawk... nawk checking if nawk is broken... no checking for Adabas support... no checking for SAP DB support... no checking for Solid support... no checking for IBM DB2 support... no checking for ODBCRouter.com support... no checking for Empress support... no checking for Empress local access support... no checking for Birdstep support... no checking for a custom ODBC support... no checking for iODBC support... no checking for Easysoft ODBC-ODBC Bridge support... no checking for unixODBC support... yes checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... nm checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking how to run the C preprocessor... cc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for i386-portbld-freebsd6.0-g++... c++ checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking how to run the C++ preprocessor... c++ -E checking the maximum length of command line arguments... (cached) 262144 checking command to parse nm output from cc object... ok checking for objdir... .libs checking for i386-portbld-freebsd6.0-ar... no checking for ar... ar checking for i386-portbld-freebsd6.0-ranlib... no checking for ranlib... ranlib checking for i386-portbld-freebsd6.0-strip... no checking for strip... strip checking if cc static flag works... yes checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... yes checking dynamic linker characteristics... freebsd6.0 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no creating libtool appending configuration tag "CXX" to libtool checking for ld used by c++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the c++ linker (/usr/bin/ld) supports shared libraries... yes checking for c++ option to produce PIC... -fPIC checking if c++ PIC flag -fPIC works... yes checking if c++ supports -c -o file.o... yes checking whether the c++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... freebsd6.0 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes configure: creating ./config.status config.status: creating config.h ===> Building for php5-odbc-5.1.4 /bin/sh /usr/ports/databases/php5-odbc/work/php-5.1.4/ext/odbc/libtool --mode=compile cc -I/usr/local/include -I. -I/usr/ports/databases/php5-odbc/work/php-5.1.4/ext/odbc -DPHP_ATOM_INC -I/usr/ports/databases/php5-odbc/work/php-5.1.4/ext/odbc/include -I/usr/ports/databases/php5-odbc/work/php-5.1.4/ext/odbc/main -I/usr/ports/databases/php5-odbc/work/php-5.1.4/ext/odbc -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/databases/php5-odbc/work/php-5.1.4/ext/odbc/php_odbc.c -o php_odbc.lo mkdir .libs cc -I/usr/local/include -I. -I/usr/ports/databases/php5-odbc/work/php-5.1.4/ext/odbc -DPHP_ATOM_INC -I/usr/ports/databases/php5-odbc/work/php-5.1.4/ext/odbc/include -I/usr/ports/databases/php5-odbc/work/php-5.1.4/ext/odbc/main -I/usr/ports/databases/php5-odbc/work/php-5.1.4/ext/odbc -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/databases/php5-odbc/work/php-5.1.4/ext/odbc/php_odbc.c -fPIC -DPIC -o .libs/php_odbc.o /bin/sh /usr/ports/databases/php5-odbc/work/php-5.1.4/ext/odbc/libtool --mode=link cc -DPHP_ATOM_INC -I/usr/ports/databases/php5-odbc/work/php-5.1.4/ext/odbc/include -I/usr/ports/databases/php5-odbc/work/php-5.1.4/ext/odbc/main -I/usr/ports/databases/php5-odbc/work/php-5.1.4/ext/odbc -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -o ./odbc.la -export-dynamic -avoid-version -prefer-pic -module -rpath /usr/ports/databases/php5-odbc/work/php-5.1.4/ext/odbc/modules php_odbc.lo -R/usr/local/lib -L/usr/local/lib -lodbc cc -shared .libs/php_odbc.o -Wl,--rpath -Wl,/usr/local/lib -Wl,--rpath -Wl,/usr/local/lib -L/usr/local/lib /usr/local/lib/libodbc.so -march=pentium3 -Wl,-soname -Wl,odbc.so -o ./.libs/odbc.so creating ./odbc.la (cd ./.libs && rm -f odbc.la && ln -s ../odbc.la odbc.la) /bin/sh /usr/ports/databases/php5-odbc/work/php-5.1.4/ext/odbc/libtool --mode=install cp ./odbc.la /usr/ports/databases/php5-odbc/work/php-5.1.4/ext/odbc/modules cp ./.libs/odbc.so /usr/ports/databases/php5-odbc/work/php-5.1.4/ext/odbc/modules/odbc.so cp ./.libs/odbc.lai /usr/ports/databases/php5-odbc/work/php-5.1.4/ext/odbc/modules/odbc.la ---------------------------------------------------------------------- Libraries have been installed in: /usr/ports/databases/php5-odbc/work/php-5.1.4/ext/odbc/modules If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- Build complete. (It is safe to ignore warnings about tempnam and tmpnam). ===> Installing for php5-odbc-5.1.4 ===> php5-odbc-5.1.4 depends on file: /usr/local/include/php/main/php.h - found ===> Generating temporary packing list ===> Checking if databases/php5-odbc already installed ===> Registering installation for php5-odbc-5.1.4 **************************************************************************** The following line has been added to your /usr/local/etc/php/extensions.ini configuration file to automatically load the installed extension: extension=odbc.so **************************************************************************** ===> Returning to build of php5-extensions-1.0 ===> php5-extensions-1.0 depends on file: /usr/local/lib/php/20050922/openssl.so - found ===> php5-extensions-1.0 depends on file: /usr/local/lib/php/20050922/pcre.so - not found ===> Verifying install for /usr/local/lib/php/20050922/pcre.so in /usr/ports/devel/php5-pcre ===> Vulnerability check disabled, database not found ===> Extracting for php5-pcre-5.1.4 => MD5 Checksum OK for php-5.1.4.tar.bz2. => SHA256 Checksum OK for php-5.1.4.tar.bz2. ===> Patching for php5-pcre-5.1.4 ===> php5-pcre-5.1.4 depends on executable: phpize - found ===> php5-pcre-5.1.4 depends on file: /usr/local/bin/autoconf259 - found ===> PHPizing for php5-pcre-5.1.4 Configuring for: PHP Api Version: 20041225 Zend Module Api No: 20050922 Zend Extension Api No: 220051025 ===> Configuring for php5-pcre-5.1.4 configure: WARNING: you should use --build, --host, --target checking for egrep... grep -E checking for a sed that does not truncate output... /usr/bin/sed checking for i386-portbld-freebsd6.0-gcc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ANSI C... none needed checking whether cc understands -c and -o together... yes checking if compiler supports -R... yes checking build system type... i386-portbld-freebsd6.0 checking host system type... i386-portbld-freebsd6.0 checking target system type... i386-portbld-freebsd6.0 checking for PHP prefix... /usr/local checking for PHP includes... -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext checking for PHP extension directory... /usr/local/lib/php/20050922 checking for PHP installed headers prefix... /usr/local/include/php checking for re2c... no configure: WARNING: You will need re2c 0.9.11 or later if you want to regenerate PHP parsers. checking for gawk... no checking for nawk... nawk checking if nawk is broken... no checking for PCRE support... yes, shared checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... nm checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking how to run the C preprocessor... cc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for i386-portbld-freebsd6.0-g++... c++ checking whether we are using the GNU C++ compiler... yes checking whether c++ accepts -g... yes checking how to run the C++ preprocessor... c++ -E checking the maximum length of command line arguments... (cached) 262144 checking command to parse nm output from cc object... ok checking for objdir... .libs checking for i386-portbld-freebsd6.0-ar... no checking for ar... ar checking for i386-portbld-freebsd6.0-ranlib... no checking for ranlib... ranlib checking for i386-portbld-freebsd6.0-strip... no checking for strip... strip checking if cc static flag works... yes checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... yes checking dynamic linker characteristics... freebsd6.0 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no creating libtool appending configuration tag "CXX" to libtool checking for ld used by c++... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking whether the c++ linker (/usr/bin/ld) supports shared libraries... yes checking for c++ option to produce PIC... -fPIC checking if c++ PIC flag -fPIC works... yes checking if c++ supports -c -o file.o... yes checking whether the c++ linker (/usr/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... freebsd6.0 ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes configure: creating ./config.status config.status: creating config.h ===> Building for php5-pcre-5.1.4 /bin/sh /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/libtool --mode=compile cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_chartables.c -o pcrelib/pcre_chartables.lo mkdir pcrelib/.libs cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_chartables.c -fPIC -DPIC -o pcrelib/.libs/pcre_chartables.o /bin/sh /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/libtool --mode=compile cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_ucp_searchfuncs.c -o pcrelib/pcre_ucp_searchfuncs.lo cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_ucp_searchfuncs.c -fPIC -DPIC -o pcrelib/.libs/pcre_ucp_searchfuncs.o /bin/sh /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/libtool --mode=compile cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_compile.c -o pcrelib/pcre_compile.lo cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_compile.c -fPIC -DPIC -o pcrelib/.libs/pcre_compile.o /bin/sh /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/libtool --mode=compile cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_config.c -o pcrelib/pcre_config.lo cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_config.c -fPIC -DPIC -o pcrelib/.libs/pcre_config.o /bin/sh /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/libtool --mode=compile cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_dfa_exec.c -o pcrelib/pcre_dfa_exec.lo cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_dfa_exec.c -fPIC -DPIC -o pcrelib/.libs/pcre_dfa_exec.o /bin/sh /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/libtool --mode=compile cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_exec.c -o pcrelib/pcre_exec.lo cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_exec.c -fPIC -DPIC -o pcrelib/.libs/pcre_exec.o /bin/sh /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/libtool --mode=compile cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_fullinfo.c -o pcrelib/pcre_fullinfo.lo cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_fullinfo.c -fPIC -DPIC -o pcrelib/.libs/pcre_fullinfo.o /bin/sh /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/libtool --mode=compile cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_get.c -o pcrelib/pcre_get.lo cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_get.c -fPIC -DPIC -o pcrelib/.libs/pcre_get.o /bin/sh /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/libtool --mode=compile cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_globals.c -o pcrelib/pcre_globals.lo cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_globals.c -fPIC -DPIC -o pcrelib/.libs/pcre_globals.o /bin/sh /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/libtool --mode=compile cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_info.c -o pcrelib/pcre_info.lo cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_info.c -fPIC -DPIC -o pcrelib/.libs/pcre_info.o /bin/sh /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/libtool --mode=compile cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_maketables.c -o pcrelib/pcre_maketables.lo cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_maketables.c -fPIC -DPIC -o pcrelib/.libs/pcre_maketables.o /bin/sh /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/libtool --mode=compile cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_ord2utf8.c -o pcrelib/pcre_ord2utf8.lo cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_ord2utf8.c -fPIC -DPIC -o pcrelib/.libs/pcre_ord2utf8.o /bin/sh /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/libtool --mode=compile cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_refcount.c -o pcrelib/pcre_refcount.lo cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_refcount.c -fPIC -DPIC -o pcrelib/.libs/pcre_refcount.o /bin/sh /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/libtool --mode=compile cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_study.c -o pcrelib/pcre_study.lo cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_study.c -fPIC -DPIC -o pcrelib/.libs/pcre_study.o /bin/sh /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/libtool --mode=compile cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_tables.c -o pcrelib/pcre_tables.lo cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_tables.c -fPIC -DPIC -o pcrelib/.libs/pcre_tables.o /bin/sh /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/libtool --mode=compile cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_try_flipped.c -o pcrelib/pcre_try_flipped.lo cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_try_flipped.c -fPIC -DPIC -o pcrelib/.libs/pcre_try_flipped.o /bin/sh /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/libtool --mode=compile cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_valid_utf8.c -o pcrelib/pcre_valid_utf8.lo cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_valid_utf8.c -fPIC -DPIC -o pcrelib/.libs/pcre_valid_utf8.o /bin/sh /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/libtool --mode=compile cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_version.c -o pcrelib/pcre_version.lo cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_version.c -fPIC -DPIC -o pcrelib/.libs/pcre_version.o /bin/sh /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/libtool --mode=compile cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_xclass.c -o pcrelib/pcre_xclass.lo cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib/pcre_xclass.c -fPIC -DPIC -o pcrelib/.libs/pcre_xclass.o /bin/sh /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/libtool --mode=compile cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/php_pcre.c -o php_pcre.lo mkdir .libs cc -DEXPORT= -DNEWLINE=10 -DSUPPORT_UTF8 -DSUPPORT_UCP -DLINK_SIZE=2 -DPOSIX_MALLOC_THRESHOLD=10 -DMATCH_LIMIT=10000000 -DMATCH_LIMIT_RECURSION=10000000 -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/pcrelib -I. -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -DPHP_ATOM_INC -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/include -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/main -I/usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre -I/usr/local/include/php -I/usr/local/include/php/main -I/usr/local/include/php/TSRM -I/usr/local/include/php/Zend -I/usr/local/include/php/ext -DHAVE_CONFIG_H -O -pipe -march=pentium3 -c /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/php_pcre.c -fPIC -DPIC -o .libs/php_pcre.o /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/php_pcre.c:1630: error: `fifth_arg_force_ref' undeclared here (not in a function) /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/php_pcre.c:1630: error: initializer element is not constant /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/php_pcre.c:1630: error: (near initialization for `pcre_functions[2].arg_info') /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/php_pcre.c:1630: error: initializer element is not constant /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/php_pcre.c:1630: error: (near initialization for `pcre_functions[2]') /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/php_pcre.c:1631: error: initializer element is not constant /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/php_pcre.c:1631: error: (near initialization for `pcre_functions[3].arg_info') /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/php_pcre.c:1631: error: initializer element is not constant /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/php_pcre.c:1631: error: (near initialization for `pcre_functions[3]') /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/php_pcre.c:1632: error: initializer element is not constant /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/php_pcre.c:1632: error: (near initialization for `pcre_functions[4]') /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/php_pcre.c:1633: error: initializer element is not constant /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/php_pcre.c:1633: error: (near initialization for `pcre_functions[5]') /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/php_pcre.c:1634: error: initializer element is not constant /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/php_pcre.c:1634: error: (near initialization for `pcre_functions[6]') /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/php_pcre.c:1635: error: initializer element is not constant /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre/php_pcre.c:1635: error: (near initialization for `pcre_functions[7]') *** Error code 1 Stop in /usr/ports/devel/php5-pcre/work/php-5.1.4/ext/pcre. *** Error code 1 Stop in /usr/ports/devel/php5-pcre. *** Error code 1 Stop in /usr/ports/lang/php5-extensions. # Now, I've not got any (not even the previously, working - but un-portupgradeable) php5-extensions installed. Fix: Don't know How-To-Repeat: See above. Thought I was followind good advice.
Responsible Changed From-To: freebsd-ports-bugs->ale Over to maintainer
State Changed From-To: open->closed You have an old zend_modules.h (coming from 5.1.2) somewhere. Clean you system and rebuild php 5.1.4 from zero.
Hi Alex! On Mon, 05 Jun 2006, Alex Dupre wrote: > Synopsis: make install php5-pcre fails with "error: (near initialization for `pcre_functions[7]')" verbage > > State-Changed-From-To: open->closed > State-Changed-By: ale > State-Changed-When: Mon Jun 5 05:55:49 UTC 2006 > State-Changed-Why: > You have an old zend_modules.h (coming from 5.1.2) somewhere. > Clean you system and rebuild php 5.1.4 from zero. Thanks for the advice. I didn't install php5 as such, only php5-extensions so as to obtain the requried modules I needed for this server. Seeing that I'd already "make deinstall clean" for php5-extensions and reinstalled, what procedure(s) should I follow here? Do I need to also do "make deinstall clean" for each of the extension modules as well? Sorry for asking, but I'm not certain how my having php5-extensions is affected by your suggestion being pointed to php 5.1.4 - which I never installed as such. Thanks again. Regards, Stacey > > http://www.freebsd.org/cgi/query-pr.cgi?pr=98510
Hello Alex, Thanks for the response. On Mon, 05 Jun 2006, Alex Dupre wrote: > Stacey Roberts ha scritto: > > Thanks for the advice. I didn't install php5 as such, only php5-extensions so as to > > obtain the requried modules I needed for this server. Seeing that I'd already "make > > deinstall clean" for php5-extensions and reinstalled, what procedure(s) should I follow > > here? > > You should remove lang/php5, be sure there is no > /usr/local/include/php/Zend/zend_modules.h file (or in any other include > path) and then reinstall php5. Forgive me, but I don't know how else to say this., php5 is *not* installed on this machine: odin# pkg_info php5* | grep php | grep -v "shared extension" Information for php5-bcmath-5.1.4: WWW: http://www.php.net/ Information for php5-bz2-5.1.4: WWW: http://www.php.net/ Information for php5-calendar-5.1.4: WWW: http://www.php.net/ Information for php5-ctype-5.1.4: WWW: http://www.php.net/ Information for php5-dba-5.1.4: WWW: http://www.php.net/ Information for php5-dbase-5.1.4: WWW: http://www.php.net/ Information for php5-dom-5.1.4: WWW: http://www.php.net/ Information for php5-filepro-5.1.4: WWW: http://www.php.net/ Information for php5-gd-5.1.4: WWW: http://www.php.net/ Information for php5-gettext-5.1.4: WWW: http://www.php.net/ Information for php5-gmp-5.1.4_1: WWW: http://www.php.net/ Information for php5-iconv-5.1.4: WWW: http://www.php.net/ Information for php5-imap-5.1.4: WWW: http://www.php.net/ Information for php5-ldap-5.1.4: WWW: http://www.php.net/ Information for php5-mbstring-5.1.4: WWW: http://www.php.net/ Information for php5-mcrypt-5.1.4: WWW: http://www.php.net/ Information for php5-mhash-5.1.4: WWW: http://www.php.net/ Information for php5-mysql-5.1.4: WWW: http://www.php.net/ Information for php5-mysqli-5.1.4: WWW: http://www.php.net/ Information for php5-odbc-5.1.4: WWW: http://www.php.net/ Information for php5-openssl-5.1.4: WWW: http://www.php.net/ Information for php5-posix-5.1.4: WWW: http://www.php.net/ Information for php5-session-5.1.4: php5-sqlite-5.1.4 WWW: http://www.php.net/ Information for php5-simplexml-5.1.4: WWW: http://www.php.net/ Information for php5-sqlite-5.1.4: WWW: http://www.php.net/ Information for php5-tokenizer-5.1.4: WWW: http://www.php.net/ Information for php5-xml-5.1.4: WWW: http://www.php.net/ Information for php5-xmlwriter-5.1.4: WWW: http://www.php.net/ odin# What exactly am I supposed to be "removing", here, please? Thanks. Regards, Stacey > > -- > Alex Dupre
Hello, On Mon, 05 Jun 2006, Alex Dupre wrote: > Stacey Roberts wrote: > > Forgive me, but I don't know how else to say this., php5 is *not* installed on this > > machine: > > And how can you build php-pcre if you haven't php?! Install that before. Err., I (simply) did: - cd /usr/ports/lang/php5-extensions/ make config (selected the desired extensions from the menu) make install clean But this information is in the original PR (ports/98510) I submitted.., Regards, Stacey > > -- > Alex Dupre
Hi Alex! On Mon, 05 Jun 2006, Alex Dupre wrote: > Stacey Roberts wrote: > > Forgive me, but I don't know how else to say this., php5 is *not* installed on this > > machine: > > And how can you build php-pcre if you haven't php?! Install that before. > Is there any update on this PR, given the information last supplied, please? Regards, Stacey > -- > Alex Dupre