FreeBSD 9.0-CURRENT #16: Wed Nov 25 15:51:32 CET 2009 worked well on the machine. After update and rebuilding from src the kernel freezes hard. Keyboard was activated but CTL_ALT_DEL and numlock does not work. Booting with ACPI disabled is possible. Last messages on console: usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 No additional messages there when booting verbose. Diff of dmesg: --- dmesg.noacpi 2010-01-22 16:53:43.000000000 +0100 +++ dmesg.acpi 2010-01-22 16:30:26.000000000 +0100 @@ -11,19 +11,24 @@ Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 2147483648 (2048 MB) avail memory = 2086731776 (1990 MB) -MPTable: <GIGABYTE 6VTXDR-C > +ACPI APIC Table: <AMIINT AMIINI09> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 2 package(s) x 1 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 -ioapic0: Assuming intbase of 0 ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 -pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard -pci0: <PCI bus> on pcib0 +acpi0: <AMIINT AMIINI09> on motherboard +acpi0: [ITHREAD] +acpi0: Power Button (fixed) +Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 +acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 +acpi_button0: <Power Button> on acpi0 +pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 +pci0: <ACPI PCI bus> on pcib0 agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> on hostb0 agp0: aperture size is 64M -pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0 +pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xc800-0xc8ff mem 0xde000000-0xdeffffff,0xdfaff000-0xdfafffff irq 17 at device 0.0 on pci1 isab0: <PCI-ISA bridge> at device 7.0 on pci0 @@ -35,11 +40,9 @@ ata1: [ITHREAD] uhci0: <VIA 83C572 USB controller> port 0xe800-0xe81f irq 10 at device 7.2 on pci0 uhci0: [ITHREAD] -uhci0: LegSup = 0xa000 usbus0: <VIA 83C572 USB controller> on uhci0 uhci1: <VIA 83C572 USB controller> port 0xec00-0xec1f irq 10 at device 7.3 on pci0 uhci1: [ITHREAD] -uhci1: LegSup = 0xa000 usbus1: <VIA 83C572 USB controller> on uhci1 pci0: <bridge> at device 7.4 (no driver attached) fxp0: <Intel 82559 Pro/100 Ethernet> port 0xe400-0xe43f mem 0xdffff000-0xdfffffff,0xdfe00000-0xdfefffff irq 18 at device 14.0 on pci0 @@ -48,21 +51,15 @@ inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:20:ed:64:11:ea fxp0: [ITHREAD] -cpu0 on motherboard -cpu1 on motherboard -pmtimer0 on isa0 -unknown: <PNP0c01> can't assign resources (memory) -atrtc0: <AT realtime clock> at port 0x70-0x71 irq 8 pnpid PNP0b00 on isa0 -atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 irq 1 pnpid PNP0303 on isa0 -atkbd0: <AT Keyboard> irq 1 on atkbdc0 -kbd0 at atkbd0 -atkbd0: [GIANT-LOCKED] -atkbd0: [ITHREAD] -uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 pnpid PNP0501 on isa0 +acpi_tz0: <Thermal Zone> on acpi0 +fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0 +fdc0: [FILTER] +fd0: <1440-KB 3.5" drive> on fdc0 drive 0 +uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] -uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 pnpid PNP0501 on isa0 +uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart1: [FILTER] -ppc0: <ECP parallel printer port> at port 0x378-0x37f,0x778-0x77a irq 7 drq 3 pnpid PNP0401 on isa0 +ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppc0: [ITHREAD] @@ -73,27 +70,17 @@ lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 +atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 +cpu0: <ACPI CPU> on acpi0 +cpu1: <ACPI CPU> on acpi0 +pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 -unknown: <PNP0c01> can't assign resources (memory) -driver bug: Unable to set devclass (devname: (null)) +atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 +atkbd0: <AT Keyboard> irq 1 on atkbdc0 +kbd0 at atkbd0 +atkbd0: [GIANT-LOCKED] +atkbd0: [ITHREAD] Timecounters tick every 1.000 msec -usbus0: 12Mbps Full Speed USB v1.0 -usbus1: 12Mbps Full Speed USB v1.0 -ugen0.1: <VIA> at usbus0 -uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 -ugen1.1: <VIA> at usbus1 -uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 -ad0: 39266MB <IC35L040AVVA07 0 VA2OA52A> at ata0-master UDMA100 -GEOM: ad0: partition 1 does not start on a track boundary. -GEOM: ad0: partition 1 does not end on a track boundary. -acd0: CDROM <QSI CD-ROM SCR-242/CQ26> at ata1-master UDMA33 -SMP: AP CPU #1 Launched! -WARNING: WITNESS option enabled, expect reduced performance. -GEOM: ad0s1: geometry does not match label (255h,63s != 16h,255s). -Root mount waiting for: usbus1 usbus0 -uhub0: 2 ports with 2 removable, self powered -uhub1: 2 ports with 2 removable, self powered -Trying to mount root from ufs:/dev/ad0s1a Diff of dmesg with last known good: [...] -FreeBSD 9.0-CURRENT #16: Wed Nov 25 15:51:32 CET 2009 - root@root8.dinoex.sub.de:/usr/obj/usr/src/sys/GENERIC i386 +FreeBSD 9.0-CURRENT #18: Fri Jan 22 15:17:42 CET 2010 + root@root9.dinoex.sub.de:/usr/obj/usr/src/sys/GENERIC i386 [...] -avail memory = 2086764544 (1990 MB) +avail memory = 2086731776 (1990 MB) [...] agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> on hostb0 -agp0: aperture size is 256M +agp0: aperture size is 64M [...] Timecounters tick every 1.000 msec -usbus0: 12Mbps Full Speed USB v1.0 -usbus1: 12Mbps Full Speed USB v1.0 -ugen0.1: <VIA> at usbus0 -uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 -ugen1.1: <VIA> at usbus1 -uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 -ad0: 39266MB <IC35L040AVVA07 0 VA2OA52A> at ata0-master UDMA100 -acd0: CDROM <QSI CD-ROM SCR-242/CQ26> at ata1-master UDMA33 -SMP: AP CPU #1 Launched! -WARNING: WITNESS option enabled, expect reduced performance. -uhub0: 2 ports with 2 removable, self powered -uhub1: 2 ports with 2 removable, self powered -GEOM: ad0: partition 1 does not start on a track boundary. -GEOM: ad0: partition 1 does not end on a track boundary. -GEOM: ad0s1: geometry does not match label (255h,63s != 16h,255s). -Trying to mount root from ufs:/dev/ad0s1a [...] Fix: Workaround: boot with ACPI disabled How-To-Repeat: boot GENERIC on the hardware, Rennix 1HE Server.
Problem still here with FreeBSD root9.dinoex.sub.de 9.0-CURRENT FreeBSD 9.0-CURRENT #19: Thu Mar 25 11:51:53 CET 2010 root@root9.dinoex.sub.de:/usr/obj/usr/src/sys/GENERIC i386 kind regards Dirk - Dirk Meyer, Im Grund 4, 34317 Habichtswald, Germany - [dirk.meyer@dinoex.sub.org],[dirk.meyer@guug.de],[dinoex@FreeBSD.org] http://people.freebsd.org/~dinoex/errorlogs/
For bugs matching the following criteria: Status: In Progress Changed: (is less than) 2014-06-01 Reset to default assignee and clear in-progress tags. Mail being skipped