Bug 122880
| Summary: | [hang] Kernel lock-up during 7.0 installation disc boot up on motherboard w/ AMD 780G chipset | ||
|---|---|---|---|
| Product: | Base System | Reporter: | Hoon Choi <bhchoi> |
| Component: | kern | Assignee: | freebsd-bugs (Nobody) <bugs> |
| Status: | Closed Overcome By Events | ||
| Severity: | Affects Only Me | CC: | grahamperrin |
| Priority: | Normal | ||
| Version: | 7.0-RELEASE | ||
| Hardware: | Any | ||
| OS: | Any | ||
|
Description
Hoon Choi
2008-04-18 06:20:00 UTC
Please try to disable USB in BIOS. If that will drive you to a successful boot, please post us a verbose boot dmesg and `pciconf -lv' output. If you still experience problems, please try playing with ACPI settings and check your vendor for an updated BIOS version. After disabling USB controller in BIOS, I was able to install FreeBSD.
Once installed, I was not able to enable the network interface
(Realtek RTL8168/8111).
I saved the dmesg and pciconf information to text files, and then used
Ubuntu live CD to
mount the partition on which FreeBSD is installed to retrieve the text files.
dmesg output:
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008
root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80fc8000.
Preloaded mfs_root "/boot/mfsroot" at 0xffffffff80fc81c0.
Calibrating clock(s) ... i8254 clock: 1190233 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2200903149 Hz
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2200.90-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x60fb2 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
Cores per package: 2
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
usable memory = 1861701632 (1775 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages)
0x00000000010c5000 - 0x000000006cad4fff, 1805713408 bytes (440848 pages)
avail memory = 1795989504 (1712 MB)
ACPI APIC Table: <041508 APIC1642>
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
ACPI: RSDP @ 0x0xfb500/0x0024 (v 2 ACPIAM)
ACPI: XSDT @ 0x0x6ffa0100/0x0054 (v 1 041508 XSDT1642 0x20080415 MSFT
0x00000097)
ACPI: FACP @ 0x0x6ffa0290/0x00F4 (v 3 041508 FACP1642 0x20080415 MSFT
0x00000097)
ACPI: DSDT @ 0x0x6ffa05c0/0x6DFD (v 1 A0896 A0896001 0x00000001 INTL
0x20051117)
ACPI: FACS @ 0x0x6ffae000/0x0040
ACPI: APIC @ 0x0x6ffa0390/0x006C (v 1 041508 APIC1642 0x20080415 MSFT
0x00000097)
ACPI: MCFG @ 0x0x6ffa0400/0x003C (v 1 041508 OEMMCFG 0x20080415 MSFT
0x00000097)
ACPI: OEMB @ 0x0x6ffae040/0x0071 (v 1 041508 OEMB1642 0x20080415 MSFT
0x00000097)
ACPI: HPET @ 0x0x6ffa73c0/0x0038 (v 1 041508 OEMHPET 0x20080415 MSFT
0x00000097)
ACPI: SSDT @ 0x0x6ffa7400/0x0206 (v 1 A_M_I_ POWERNOW 0x00000001 AMD
0x00000001)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
ioapic0 <Version 2.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 10:34:18)
acpi0: <041508 XSDT1642> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.RS78.NB2_ -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.SATA.SACS -> bus 0 dev 17 func 0
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of ffb80000, 80000 (3) failed
acpi0: reservation of fec10000, 20 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 6ff00000 (3) failed
ACPI HPET table warning: Sequence is non-zero (2)
ACPI timer: 1/2 1/2 0/5 1/2 0/3 1/2 1/2 1/2 1/2 1/2 -> 8
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 4 7 10 11 12 14 15
Validation 0 10 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 12 14 15
Validation 0 255 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 4 7 10 11 12 14 15
Validation 0 10 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 12 14 15
Validation 0 255 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 12 14 15
Validation 0 255 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 12 14 15
Validation 0 255 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 4 7 10 11 12 14 15
Validation 0 11 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 12 14 15
Validation 0 255 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x4353 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x810
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1022, dev=0x9600, revid=0x00
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1043, dev=0x9602, revid=0x00
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x9606, revid=0x00
domain=0, bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 18
found-> vendor=0x1002, dev=0x4391, revid=0x00
domain=0, bus=0, slot=17, func=0
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type I/O Port, range 32, base rxc000, size 3, enabled
map[14]: type I/O Port, range 32, base rxb000, size 2, enabled
map[18]: type I/O Port, range 32, base rxa000, size 3, enabled
map[1c]: type I/O Port, range 32, base rx9000, size 2, enabled
map[20]: type I/O Port, range 32, base rx8000, size 4, enabled
map[24]: type Memory, range 32, base rxfbcff800, size 10, enabled
pcib0: matched entry for 0.17.INTA
pcib0: slot 17 INTA hardwired to IRQ 22
found-> vendor=0x1002, dev=0x4385, revid=0x3a
domain=0, bus=0, slot=20, func=0
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0403, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x439c, revid=0x00
domain=0, bus=0, slot=20, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
MSI supports 2 messages
map[20]: type I/O Port, range 32, base rxff00, size 4, enabled
found-> vendor=0x1002, dev=0x4383, revid=0x00
domain=0, bus=0, slot=20, func=2
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0410, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 64, base rxfbcf8000, size 14, enabled
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x439d, revid=0x00
domain=0, bus=0, slot=20, func=3
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4384, revid=0x00
domain=0, bus=0, slot=20, func=4
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0105, statreg=0x02a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
domain=0, bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
domain=0, bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
domain=0, bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
domain=0, bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0xfbd00000-0xfbefffff
pcib1: prefetched decode 0xd0000000-0xdfffffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1002, dev=0x9610, revid=0x00
domain=0, bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Prefetchable Memory, range 32, base rxd0000000, size 28, enabled
pcib1: requested memory range 0xd0000000-0xdfffffff: good
map[14]: type I/O Port, range 32, base rxd000, size 8, enabled
pcib1: requested I/O range 0xd000-0xd0ff: in range
map[18]: type Memory, range 32, base rxfbef0000, size 16, enabled
pcib1: requested memory range 0xfbef0000-0xfbefffff: good
map[24]: type Memory, range 32, base rxfbd00000, size 20, enabled
pcib1: requested memory range 0xfbd00000-0xfbdfffff: good
pcib1: matched entry for 1.5.INTA
pcib1: slot 5 INTA hardwired to IRQ 18
vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem
0xd0000000-0xdfffffff,0xfbef0000-0xfbefffff,0xfbd00000-0xfbdfffff irq
18 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xe000-0xefff
pcib2: memory decode 0xfbf00000-0xfbffffff
pcib2: prefetched decode 0xfaf00000-0xfaffffff
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found-> vendor=0x10ec, dev=0x8168, revid=0x02
domain=0, bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 2 messages in map 0x20
map[10]: type I/O Port, range 32, base rxe800, size 8, enabled
pcib2: requested I/O range 0xe800-0xe8ff: in range
map[18]: type Memory, range 64, base rxfbfff000, size 12, enabled
pcib2: requested memory range 0xfbfff000-0xfbffffff: good
map[20]: type Prefetchable Memory, range 64, base rxfaff0000, size 16, enabled
pcib2: requested memory range 0xfaff0000-0xfaffffff: good
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 18
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800
pcib2: re0 requested I/O range 0xe800-0xe8ff: in range
pcib2: re0 requested I/O range 0xe800-0xe8ff: in range
pci2: <network, ethernet> at device 0.0 (no driver attached)
atapci0: <ATI (ID=43911002) AHCI controller> port
0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f
mem 0xfbcff800-0xfbcffbff irq 22 at device 17.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8000
atapci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfbcff800
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 49
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci0
ata2: SATA connect time=0ms
ata2: SIGNATURE: 00000101
ata2: ahci_reset devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: SATA connect time=0ms
ata3: SIGNATURE: eb140101
ata3: ahci_reset devices=0x4<ATAPI_MASTER>
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: SATA connect status=00000000
ata4: ahci_reset devices=0x0
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: SATA connect status=00000000
ata5: ahci_reset devices=0x0
ata5: [MPSAFE]
ata5: [ITHREAD]
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP700 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on
pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xff00
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=7f ostat1=7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: reset tp2 stat0=ff stat1=ff devices=0x0
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 50
ata0: [MPSAFE]
ata0: [ITHREAD]
pci0: <multimedia> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xf000-0xfff
pcib3: no prefetched decode
pcib3: Subtractively decoded bridge.
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq
2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 51
fdc0: [FILTER]
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 52
ppbus0: [MPSAFE]
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 53
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 54
sio0: [FILTER]
ahc_isa_probe 0: ioport 0xc00 alloc failed
ex_isa_identify()
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 116414 -> 100000
procfs registered
lapic: Divisor 2, Frequency 100041058 hz
Timecounter "TSC" frequency 2200903149 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff80bc6c08
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 715404MB <SAMSUNG HD753LJ 1AA01107> at ata2-master SATA300
ad4: 1465149168 sectors [1453521C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: Silicon Image check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ata3: device_reset timeout=4770us
acd0: <HL-DT-ST DVDRAM GH20NS10/EL01> DVDR drive at ata3 as master
acd0: read 8268KB/s (8268KB/s) write 8269KB/s (8269KB/s), 2048KB buffer, SATA150
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-R 120mm data disc
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 6 to local APIC 0
ioapic0: Assigning ISA IRQ 7 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 0
ioapic0: Assigning ISA IRQ 14 to local APIC 1
ioapic0: Assigning PCI IRQ 22 to local APIC 0
GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install.
Trying to mount root from ufs:/dev/md0
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /rescue/init
start_init: trying /stand/sysinstall
GEOM: Reconfigure ad4s1a, start 0 length 536870912 end 536870911
GEOM: Reconfigure ad4s1b, start 536870912 length 3723403264 end 4260274175
GEOM: Reconfigure ad4s1c, start 0 length 750153729024 end 750153729023
GEOM: Reconfigure ad4s1d, start 4260274176 length 2934964224 end 7195238399
GEOM: Reconfigure ad4s1e, start 7195238400 length 536870912 end 7732109311
GEOM: Reconfigure ad4s1f, start 7732109312 length 74242161664 end 81974270975
GEOM: Reconfigure ad4s1a, start 0 length 536870912 end 536870911
GEOM: Reconfigure ad4s1b, start 536870912 length 3723403264 end 4260274175
GEOM: Reconfigure ad4s1c, start 0 length 750153729024 end 750153729023
GEOM: Reconfigure ad4s1d, start 4260274176 length 2934964224 end 7195238399
GEOM: Reconfigure ad4s1e, start 7195238400 length 536870912 end 7732109311
GEOM: Reconfigure ad4s1f, start 7732109312 length 74242161664 end 81974270975
GEOM: Reconfigure ad4s1a, start 0 length 536870912 end 536870911
GEOM: Reconfigure ad4s1b, start 536870912 length 3723403264 end 4260274175
GEOM: Reconfigure ad4s1c, start 0 length 750153729024 end 750153729023
GEOM: Reconfigure ad4s1d, start 4260274176 length 2934964224 end 7195238399
GEOM: Reconfigure ad4s1e, start 7195238400 length 536870912 end 7732109311
GEOM: Reconfigure ad4s1f, start 7732109312 length 74242161664 end 81974270975
GEOM: Reconfigure ad4s1a, start 0 length 536870912 end 536870911
GEOM: Reconfigure ad4s1b, start 536870912 length 3723403264 end 4260274175
GEOM: Reconfigure ad4s1c, start 0 length 750153729024 end 750153729023
GEOM: Reconfigure ad4s1d, start 4260274176 length 2934964224 end 7195238399
GEOM: Reconfigure ad4s1e, start 7195238400 length 536870912 end 7732109311
GEOM: Reconfigure ad4s1f, start 7732109312 length 74242161664 end 81974270975
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...7 1 0 0 done
All buffers synced.
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008
root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80bc8000.
Calibrating clock(s) ... i8254 clock: 1190236 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2200897702 Hz
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2200.90-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x60fb2 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
Cores per package: 2
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
usable memory = 1865895936 (1779 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages)
0x0000000000cc5000 - 0x000000006cad4fff, 1809907712 bytes (441872 pages)
avail memory = 1800175616 (1716 MB)
ACPI APIC Table: <041508 APIC1642>
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
ACPI: RSDP @ 0x0xfb500/0x0024 (v 2 ACPIAM)
ACPI: XSDT @ 0x0x6ffa0100/0x0054 (v 1 041508 XSDT1642 0x20080415 MSFT
0x00000097)
ACPI: FACP @ 0x0x6ffa0290/0x00F4 (v 3 041508 FACP1642 0x20080415 MSFT
0x00000097)
ACPI: DSDT @ 0x0x6ffa05c0/0x6DFD (v 1 A0896 A0896001 0x00000001 INTL
0x20051117)
ACPI: FACS @ 0x0x6ffae000/0x0040
ACPI: APIC @ 0x0x6ffa0390/0x006C (v 1 041508 APIC1642 0x20080415 MSFT
0x00000097)
ACPI: MCFG @ 0x0x6ffa0400/0x003C (v 1 041508 OEMMCFG 0x20080415 MSFT
0x00000097)
ACPI: OEMB @ 0x0x6ffae040/0x0071 (v 1 041508 OEMB1642 0x20080415 MSFT
0x00000097)
ACPI: HPET @ 0x0x6ffa73c0/0x0038 (v 1 041508 OEMHPET 0x20080415 MSFT
0x00000097)
ACPI: SSDT @ 0x0x6ffa7400/0x0206 (v 1 A_M_I_ POWERNOW 0x00000001 AMD
0x00000001)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
ioapic0 <Version 2.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 10:34:18)
acpi0: <041508 XSDT1642> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.RS78.NB2_ -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.SATA.SACS -> bus 0 dev 17 func 0
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of ffb80000, 80000 (3) failed
acpi0: reservation of fec10000, 20 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 6ff00000 (3) failed
ACPI HPET table warning: Sequence is non-zero (2)
ACPI timer: 1/2 1/2 1/2 1/2 0/3 0/3 1/2 1/2 0/4 0/3 -> 6
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 4 7 10 11 12 14 15
Validation 0 10 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 12 14 15
Validation 0 255 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 4 7 10 11 12 14 15
Validation 0 10 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 12 14 15
Validation 0 255 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 12 14 15
Validation 0 255 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 12 14 15
Validation 0 255 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 4 7 10 11 12 14 15
Validation 0 11 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 12 14 15
Validation 0 255 N 0 4 7 10 11 12 14 15
After Disable 0 255 N 0 4 7 10 11 12 14 15
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x4353 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x810
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1022, dev=0x9600, revid=0x00
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1043, dev=0x9602, revid=0x00
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x9606, revid=0x00
domain=0, bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 18
found-> vendor=0x1002, dev=0x4391, revid=0x00
domain=0, bus=0, slot=17, func=0
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type I/O Port, range 32, base rxc000, size 3, enabled
map[14]: type I/O Port, range 32, base rxb000, size 2, enabled
map[18]: type I/O Port, range 32, base rxa000, size 3, enabled
map[1c]: type I/O Port, range 32, base rx9000, size 2, enabled
map[20]: type I/O Port, range 32, base rx8000, size 4, enabled
map[24]: type Memory, range 32, base rxfbcff800, size 10, enabled
pcib0: matched entry for 0.17.INTA
pcib0: slot 17 INTA hardwired to IRQ 22
found-> vendor=0x1002, dev=0x4385, revid=0x3a
domain=0, bus=0, slot=20, func=0
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0403, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x439c, revid=0x00
domain=0, bus=0, slot=20, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
MSI supports 2 messages
map[20]: type I/O Port, range 32, base rxff00, size 4, enabled
found-> vendor=0x1002, dev=0x4383, revid=0x00
domain=0, bus=0, slot=20, func=2
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0410, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 64, base rxfbcf8000, size 14, enabled
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x439d, revid=0x00
domain=0, bus=0, slot=20, func=3
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4384, revid=0x00
domain=0, bus=0, slot=20, func=4
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0105, statreg=0x02a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
domain=0, bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
domain=0, bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
domain=0, bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
domain=0, bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0xfbd00000-0xfbefffff
pcib1: prefetched decode 0xd0000000-0xdfffffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1002, dev=0x9610, revid=0x00
domain=0, bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Prefetchable Memory, range 32, base rxd0000000, size 28, enabled
pcib1: requested memory range 0xd0000000-0xdfffffff: good
map[14]: type I/O Port, range 32, base rxd000, size 8, enabled
pcib1: requested I/O range 0xd000-0xd0ff: in range
map[18]: type Memory, range 32, base rxfbef0000, size 16, enabled
pcib1: requested memory range 0xfbef0000-0xfbefffff: good
map[24]: type Memory, range 32, base rxfbd00000, size 20, enabled
pcib1: requested memory range 0xfbd00000-0xfbdfffff: good
pcib1: matched entry for 1.5.INTA
pcib1: slot 5 INTA hardwired to IRQ 18
vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem
0xd0000000-0xdfffffff,0xfbef0000-0xfbefffff,0xfbd00000-0xfbdfffff irq
18 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xe000-0xefff
pcib2: memory decode 0xfbf00000-0xfbffffff
pcib2: prefetched decode 0xfaf00000-0xfaffffff
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found-> vendor=0x10ec, dev=0x8168, revid=0x02
domain=0, bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 2 messages in map 0x20
map[10]: type I/O Port, range 32, base rxe800, size 8, enabled
pcib2: requested I/O range 0xe800-0xe8ff: in range
map[18]: type Memory, range 64, base rxfbfff000, size 12, enabled
pcib2: requested memory range 0xfbfff000-0xfbffffff: good
map[20]: type Prefetchable Memory, range 64, base rxfaff0000, size 16, enabled
pcib2: requested memory range 0xfaff0000-0xfaffffff: good
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 18
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800
pcib2: re0 requested I/O range 0xe800-0xe8ff: in range
pcib2: re0 requested I/O range 0xe800-0xe8ff: in range
pci2: <network, ethernet> at device 0.0 (no driver attached)
atapci0: <ATI (ID=43911002) AHCI controller> port
0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f
mem 0xfbcff800-0xfbcffbff irq 22 at device 17.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8000
atapci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfbcff800
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 49
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci0
ata2: SATA connect time=0ms
ata2: SIGNATURE: 00000101
ata2: ahci_reset devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: SATA connect time=0ms
ata3: SIGNATURE: eb140101
ata3: ahci_reset devices=0x4<ATAPI_MASTER>
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: SATA connect status=00000000
ata4: ahci_reset devices=0x0
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: SATA connect status=00000000
ata5: ahci_reset devices=0x0
ata5: [MPSAFE]
ata5: [ITHREAD]
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP700 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on
pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xff00
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=7f ostat1=7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: reset tp2 stat0=ff stat1=ff devices=0x0
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 50
ata0: [MPSAFE]
ata0: [ITHREAD]
pci0: <multimedia> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xf000-0xfff
pcib3: no prefetched decode
pcib3: Subtractively decoded bridge.
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq
2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 51
fdc0: [FILTER]
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 52
ppbus0: [MPSAFE]
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 53
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 54
sio0: [FILTER]
ahc_isa_probe 0: ioport 0xc00 alloc failed
ex_isa_identify()
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 116670 -> 100000
procfs registered
lapic: Divisor 2, Frequency 100040813 hz
Timecounter "TSC" frequency 2200897702 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 715404MB <SAMSUNG HD753LJ 1AA01107> at ata2-master SATA300
ad4: 1465149168 sectors [1453521C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: Silicon Image check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ata3: device_reset timeout=1500us
acd0: <HL-DT-ST DVDRAM GH20NS10/EL01> DVDR drive at ata3 as master
acd0: read 8268KB/s (8268KB/s) write 8269KB/s (8269KB/s), 2048KB buffer, SATA150
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 6 to local APIC 0
ioapic0: Assigning ISA IRQ 7 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 0
ioapic0: Assigning ISA IRQ 14 to local APIC 1
ioapic0: Assigning PCI IRQ 22 to local APIC 0
Trying to mount root from ufs:/dev/ad4s1a
start_init: trying /sbin/init
END of dmesg output
pciconf -lv output:
hostb0@pci0:0:0:0: class=0x060000 card=0x82f11043 chip=0x96001022
rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:1:0: class=0x060400 card=0x82f11043 chip=0x96021043
rev=0x00 hdr=0x01
vendor = 'Asustek Computer Inc.'
class = bridge
subclass = PCI-PCI
pcib2@pci0:0:6:0: class=0x060400 card=0x82f11043 chip=0x96061022
rev=0x00 hdr=0x01
vendor = 'Advanced Micro Devices (AMD)'
class = bridge
subclass = PCI-PCI
atapci0@pci0:0:17:0: class=0x010601 card=0x82ef1043 chip=0x43911002
rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
class = mass storage
none0@pci0:0:20:0: class=0x0c0500 card=0x82ef1043 chip=0x43851002
rev=0x3a hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'IXP SB600 SMBUS Controller'
class = serial bus
subclass = SMBus
atapci1@pci0:0:20:1: class=0x01018a card=0x82ef1043 chip=0x439c1002
rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
class = mass storage
subclass = ATA
none1@pci0:0:20:2: class=0x040300 card=0x82301043 chip=0x43831002
rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'IXP SB600 High Definition Audio Controller'
class = multimedia
isab0@pci0:0:20:3: class=0x060100 card=0x82ef1043 chip=0x439d1002
rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
class = bridge
subclass = PCI-ISA
pcib3@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002
rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc'
device = 'IXP SB600 PCI to PCI Bridge'
class = bridge
subclass = PCI-PCI
hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x11001022
rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(K8) Athlon 64/Opteron HyperTransport Technology
Configuration'
class = bridge
subclass = HOST-PCI
hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x11011022
rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(K8) Athlon 64/Opteron Address Map'
class = bridge
subclass = HOST-PCI
hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x11021022
rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(K8) Athlon 64/Opteron DRAM Controller'
class = bridge
subclass = HOST-PCI
hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x11031022
rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(K8) Athlon 64/Opteron Miscellaneous Control'
class = bridge
subclass = HOST-PCI
vgapci0@pci0:1:5:0: class=0x030000 card=0x82f11043 chip=0x96101002
rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
class = display
subclass = VGA
none2@pci0:2:0:0: class=0x020000 card=0x82c61043 chip=0x816810ec
rev=0x02 hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
class = network
subclass = ethernet
END of pciconf -lv output
Hoon Choi, to get to the point where your system is hanging while USB is turned on, we need a bit more dmesg output before the system is hanging. I understand disabling USB is a temporary workaround and not an acceptable solution. We just need to identify the source of the problem (it might be a conflict when USB is enabled). Please try enabling USB again, boot verbose and post us the output until it hangs. Also I'm wondering if you're able to disable the SATA-RAID functionality in BIOS (assuming you don't want to use it). If mirroring is a need for you, gmirror work better than the pseudo "hardware" mirror functionality of the SATA-controller. It's a bit lengthy but can you please post output (or a URL containing files) of `devinfo -uv` and `devinfo -rv`? For the network issue: What do you get if kldload'ing if_re? Volker State Changed From-To: open->feedback Note that submitter has been asked for feedback. Responsible Changed From-To: freebsd-bugs->vwe track RAID was and is disabled in BIOS. I am guessing there isn't a way to
turn it off completely so that it is not detected.
The console output from booting with USB re-enabled w/ verbose logging
seems identical to the one submitted at the creation of the ticket.
I've tried kldload, and it did not enable networking for me.
Outputs from `devinfo -uv` and `devinfo -rv` are also included.
Thanks.
BEGIN verbose boot w/ USB re-enabled console output
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub. class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfbcfd000-0xfbcfdfff irq 16 at devic
e 18.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfbcfd000
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 3 ports with 3 removable, self powered
ehciO: <EHCI (generic) USB 2.0 controller> mem 0xfbcff000-0xfbcff0ff irq 17 at d
evice 18.2 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfbcff000
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 51
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
ehci0: Dropped interrupts workaround enabled
END verbose boot w/ USB re-enabled console output
BEGIN `devinfo -uv` (w/ USB disabled) output
Interrupt request lines:
0 (root0)
1 (atkbd0)
3 (root0)
4 (sio0)
5 (root0)
6 (fdc0)
7 (ppc0)
8 (root0)
9 (acpi0)
10-13 (root0)
14 (ata0)
15-21 (root0)
22 (atapci0)
23 (root0)
DMA request lines:
0-1 (root0)
2 (fdc0)
3-7 (root0)
I/O ports:
0x0-0xf (root0)
0x10-0x1f (acpi0)
0x20-0x21 (root0)
0x22-0x3f (acpi0)
0x40-0x5f (root0)
0x60 (atkbdc0)
0x61 (root0)
0x62-0x63 (acpi0)
0x64 (atkbdc0)
0x65-0x6f (acpi0)
0x70-0x71 (root0)
0x72-0x7f (acpi0)
0x80 (acpi0)
0x81-0x83 (root0)
0x84-0x86 (acpi0)
0x87 (root0)
0x88 (acpi0)
0x89-0x8b (root0)
0x8c-0x8e (acpi0)
0x8f (root0)
0x90-0x9f (acpi0)
0xa0-0xa1 (root0)
0xa2-0xbf (acpi0)
0xc0-0xdf (root0)
0xe0-0xef (acpi0)
0xf0-0x16f (root0)
0x170-0x177 (atapci1)
0x178-0x1ef (root0)
0x1f0-0x1f7 (atapci1)
0x1f8-0x22f (root0)
0x230-0x23f (acpi0)
0x240-0x28f (root0)
0x290-0x29f (acpi0)
0x2a0-0x375 (root0)
0x376 (atapci1)
0x377 (root0)
0x378-0x37f (ppc0)
0x380-0x3bf (root0)
0x3c0-0x3df (vga0)
0x3e0-0x3ef (root0)
0x3f0-0x3f5 (fdc0)
0x3f6 (atapci1)
0x3f7 (fdc0)
0x3f8-0x3ff (sio0)
0x400-0x40a (root0)
0x40b (acpi0)
0x40c-0x4cf (root0)
0x4d0-0x4d1 (acpi0)
0x4d2-0x4d5 (root0)
0x4d6 (acpi0)
0x4d7-0x7ff (root0)
0x800-0x89f (acpi0)
0x8a0-0x8ff (root0)
0x900-0x90f (acpi0)
0x910-0x91f (acpi0)
0x920-0xa1f (root0)
0xa20-0xa2f (acpi0)
0xa30-0xa3f (acpi0)
0xa40-0xaff (root0)
0xb00-0xb3f (acpi0)
0xb40-0xbff (root0)
0xc00-0xc01 (acpi0)
0xc02-0xc13 (root0)
0xc14 (acpi0)
0xc15-0xc4f (root0)
0xc50-0xc51 (acpi0)
0xc52 (acpi0)
0xc53-0xc6b (root0)
0xc6c (acpi0)
0xc6d-0xc6e (root0)
0xc6f (acpi0)
0xc70-0xccf (root0)
0xcd0-0xcd1 (acpi0)
0xcd2-0xcd3 (acpi0)
0xcd4-0xcd5 (acpi0)
0xcd6-0xcd7 (acpi0)
0xcd8-0xcdf (acpi0)
0xce0-0x7fff (root0)
0x8000-0x800f (atapci0)
0x8010-0x8fff (root0)
0x9000-0x9003 (atapci0)
0x9004-0x9fff (root0)
0xa000-0xa007 (atapci0)
0xa008-0xafff (root0)
0xb000-0xb003 (atapci0)
0xb004-0xbfff (root0)
0xc000-0xc007 (atapci0)
0xc008-0xcfff (root0)
0xd000-0xd0ff (vgapci0)
0xd100-0xfdff (root0)
0xfe00-0xfefe (acpi0)
0xfeff (root0)
0xff00-0xff0f (atapci1)
0xff10-0xffff (root0)
I/O memory addresses:
0x0-0x9ebff (ram0)
0x9ec00-0x9ffff (root0)
0xa0000-0xbffff (vga0)
0xc0000-0xcffff (acpi0)
0xd0000-0xdffff (root0)
0xe0000-0xfffff (acpi0)
0x100000-0x6ff9ffff (ram0)
0x6ffa0000-0xcfffffff (root0)
0xd0000000-0xdfffffff (vgapci0)
0xe0000000-0xefffffff (acpi0)
0xf0000000-0xfafeffff (root0)
0xfaff0000-0xfaffffff ----
0xfb000000-0xfbcf7fff (root0)
0xfbcf8000-0xfbcfbfff ----
0xfbcfc000-0xfbcff7ff (root0)
0xfbcff800-0xfbcffbff (atapci0)
0xfbcffc00-0xfbcfffff (root0)
0xfbd00000-0xfbdfffff (vgapci0)
0xfbe00000-0xfbeeffff (root0)
0xfbef0000-0xfbefffff (vgapci0)
0xfbf00000-0xfbffefff (root0)
0xfbfff000-0xfbffffff ----
0xfc000000-0xfebfffff (root0)
0xfec00000-0xffffffff (acpi0)
0x100000000-0xffffffffffffffff (root0)
ACPI I/O ports:
0x10-0x1f (root0)
0x22-0x3f (root0)
0x62-0x63 (root0)
0x65-0x6f (root0)
0x72-0x80 (root0)
0x84-0x86 (root0)
0x88 (root0)
0x8c-0x8e (root0)
0x90-0x9f (root0)
0xa2-0xbf (root0)
0xe0-0xef (root0)
0x230-0x23f (root0)
0x290-0x29f (root0)
0x40b (root0)
0x4d0-0x4d1 (root0)
0x4d6 (root0)
0x800-0x807 (root0)
0x808-0x80b (acpi_timer0)
0x80c-0x80f (root0)
0x810-0x813 (acpi_throttle0)
0x814-0x89f (root0)
0x900-0x91f (root0)
0xa20-0xa3f (root0)
0xb00-0xb3f (root0)
0xc00-0xc01 (root0)
0xc14 (root0)
0xc50-0xc52 (root0)
0xc6c (root0)
0xc6f (root0)
0xcd0-0xcdf (root0)
0xfe00-0xfefe (root0)
ACPI I/O memory addresses:
0xc0000-0xcffff (root0)
0xe0000-0xfffff (root0)
0xe0000000-0xefffffff (root0)
0xfec00000-0xfecfffff (root0)
0xfed00000-0xfed003ff (acpi_hpet0)
0xfed00400-0xffffffff (root0)
END `devinfo -uv` (w/ USB disabled) output
BEGIN `devinfo -rv` (w/ USB disabled) output
nexus0
acpi0
Interrupt request lines:
9
I/O ports:
0x10-0x1f
0x22-0x3f
0x62-0x63
0x65-0x6f
0x72-0x7f
0x80
0x84-0x86
0x88
0x8c-0x8e
0x90-0x9f
0xa2-0xbf
0xe0-0xef
0x230-0x23f
0x290-0x29f
0x40b
0x4d0-0x4d1
0x4d6
0x800-0x89f
0x900-0x90f
0x910-0x91f
0xa20-0xa2f
0xa30-0xa3f
0xb00-0xb3f
0xc00-0xc01
0xc14
0xc50-0xc51
0xc52
0xc6c
0xc6f
0xcd0-0xcd1
0xcd2-0xcd3
0xcd4-0xcd5
0xcd6-0xcd7
0xcd8-0xcdf
0xfe00-0xfefe
I/O memory addresses:
0xc0000-0xcffff
0xe0000-0xfffff
0xe0000000-0xefffffff
0xfec00000-0xffffffff
cpu0 pnpinfo _HID=none _UID=0 at handle=\_PR_.P001
acpi_perf0
acpi_throttle0
ACPI I/O ports:
0x810-0x813
powernow0
cpufreq0
cpu1 pnpinfo _HID=none _UID=0 at handle=\_PR_.P002
acpi_perf1
powernow1
cpufreq1
unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.P003
unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.P004
unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU1
unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU2
unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU3
unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU4
pcib0 pnpinfo _HID=PNP0A03 _UID=0 at handle=\_SB_.PCI0
pci0
hostb0 pnpinfo vendor=0x1022 device=0x9600 subvendor=0x1043
subdevice=0x82f1 class=0x060000 at slot=0 function=0
handle=\_SB_.PCI0.RS78
pcib1 pnpinfo vendor=0x1043 device=0x9602 subvendor=0x1043
subdevice=0x82f1 class=0x060400 at slot=1 function=0
handle=\_SB_.PCI0.P0P1
pci1
vgapci0 pnpinfo vendor=0x1002 device=0x9610
subvendor=0x1043 subdevice=0x82f1 class=0x030000 at slot=5 function=0
I/O ports:
0xd000-0xd0ff
I/O memory addresses:
0xd0000000-0xdfffffff
0xfbd00000-0xfbdfffff
0xfbef0000-0xfbefffff
drm0
pcib2 pnpinfo vendor=0x1022 device=0x9606 subvendor=0x1043
subdevice=0x82f1 class=0x060400 at slot=6 function=0
handle=\_SB_.PCI0.PCE6
pci2
unknown pnpinfo vendor=0x10ec device=0x8168
subvendor=0x1043 subdevice=0x82c6 class=0x020000 at slot=0 function=0
handle=\_SB_.PCI0.PCE6.RLAN
I/O memory addresses:
0xfaff0000-0xfaffffff
0xfbfff000-0xfbffffff
atapci0 pnpinfo vendor=0x1002 device=0x4390 subvendor=0x1043
subdevice=0x82ef class=0x01018f at slot=17 function=0
handle=\_SB_.PCI0.SATA
Interrupt request lines:
22
I/O ports:
0x8000-0x800f
0x9000-0x9003
0xa000-0xa007
0xb000-0xb003
0xc000-0xc007
I/O memory addresses:
0xfbcff800-0xfbcffbff
ata2
ad4
subdisk4
acd0
ata3
unknown pnpinfo vendor=0x1002 device=0x4385 subvendor=0x1043
subdevice=0x82ef class=0x0c0500 at slot=20 function=0
handle=\_SB_.PCI0.SMBS
atapci1 pnpinfo vendor=0x1002 device=0x439c subvendor=0x1043
subdevice=0x82ef class=0x01018a at slot=20 function=1
handle=\_SB_.PCI0.IDEC
I/O ports:
0x170-0x177
0x1f0-0x1f7
0x376
0x3f6
0xff00-0xff0f
ata0
Interrupt request lines:
14
unknown pnpinfo vendor=0x1002 device=0x4383 subvendor=0x1043
subdevice=0x8230 class=0x040300 at slot=20 function=2
handle=\_SB_.PCI0.SBAZ
I/O memory addresses:
0xfbcf8000-0xfbcfbfff
isab0 pnpinfo vendor=0x1002 device=0x439d subvendor=0x1043
subdevice=0x82ef class=0x060100 at slot=20 function=3
handle=\_SB_.PCI0.SBRG
isa0
sc0
sio1
sio2
sio3
vga0
I/O ports:
0x3c0-0x3df
I/O memory addresses:
0xa0000-0xbffff
pcib3 pnpinfo vendor=0x1002 device=0x4384 subvendor=0x0000
subdevice=0x0000 class=0x060401 at slot=20 function=4
handle=\_SB_.PCI0.P0PC
pci3
hostb1 pnpinfo vendor=0x1022 device=0x1100 subvendor=0x0000
subdevice=0x0000 class=0x060000 at slot=24 function=0
hostb2 pnpinfo vendor=0x1022 device=0x1101 subvendor=0x0000
subdevice=0x0000 class=0x060000 at slot=24 function=1
hostb3 pnpinfo vendor=0x1022 device=0x1102 subvendor=0x0000
subdevice=0x0000 class=0x060000 at slot=24 function=2
hostb4 pnpinfo vendor=0x1022 device=0x1103 subvendor=0x0000
subdevice=0x0000 class=0x060000 at slot=24 function=3
acpi_sysresource0 pnpinfo _HID=PNP0C02 _UID=20 at
handle=\_SB_.PCI0.RS78.BROD
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.PCE2
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.PCE3
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.PCE4
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.PCE5
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.PCE7
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.PCE9
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.PCEA
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.PCEB
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.PCEC
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDEC.PRID
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDEC.PRID.P_D0
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDEC.PRID.P_D1
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDEC.SECD
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDEC.SECD.S_D0
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDEC.SECD.S_D1
unknown pnpinfo _HID=PNP0000 _UID=0 at handle=\_SB_.PCI0.SBRG.PIC_
atdma0 pnpinfo _HID=PNP0200 _UID=0 at handle=\_SB_.PCI0.SBRG.DMAD
attimer0 pnpinfo _HID=PNP0100 _UID=0 at handle=\_SB_.PCI0.SBRG.TMR_
attimer1 pnpinfo _HID=PNP0B00 _UID=0 at handle=\_SB_.PCI0.SBRG.RTC0
unknown pnpinfo _HID=PNP0800 _UID=0 at handle=\_SB_.PCI0.SBRG.SPKR
fpupnp0 pnpinfo _HID=PNP0C04 _UID=0 at handle=\_SB_.PCI0.SBRG.COPR
fdc0 pnpinfo _HID=PNP0700 _UID=0 at handle=\_SB_.PCI0.SBRG.FDC_
Interrupt request lines:
6
DMA request lines:
2
I/O ports:
0x3f0-0x3f5
0x3f7
fd0
ppc0 pnpinfo _HID=PNP0400 _UID=0 at handle=\_SB_.PCI0.SBRG.LPTE
Interrupt request lines:
7
I/O ports:
0x378-0x37f
ppbus0
plip0
lpt0
ppi0
unknown pnpinfo _HID=ATK0110 _UID=16843024 at handle=\_SB_.PCI0.SBRG.ASOC
unknown pnpinfo _HID=PNP0103 _UID=0 at handle=\_SB_.PCI0.SBRG.HPET
unknown pnpinfo _HID=PNP0F03 _UID=0 at handle=\_SB_.PCI0.SBRG.PS2M
atkbdc0 pnpinfo _HID=PNP0303 _UID=0 at handle=\_SB_.PCI0.SBRG.PS2K
I/O ports:
0x60
0x64
atkbd0
Interrupt request lines:
1
psm0
sio0 pnpinfo _HID=PNP0501 _UID=1 at handle=\_SB_.PCI0.SBRG.UAR1
Interrupt request lines:
4
I/O ports:
0x3f8-0x3ff
acpi_sysresource1 pnpinfo _HID=PNP0C02 _UID=0 at handle=\_SB_.PCI0.SBRG.OMSC
acpi_sysresource2 pnpinfo _HID=PNP0C02 _UID=16 at
handle=\_SB_.PCI0.SBRG.RMSC
acpi_sysresource3 pnpinfo _HID=PNP0C02 _UID=46 at
handle=\_SB_.PCI0.SBRG.SIOR
acpi_sysresource4 pnpinfo _HID=PNP0C02 _UID=17 at handle=\_SB_.PCI0.PCIE
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.UHC1
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.UHC2
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.UHC3
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.USB4
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.UHC5
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.UHC6
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.UHC7
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SATA.PRID
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SATA.PRID.P_D0
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SATA.PRID.P_D1
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SATA.SECD
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SATA.SECD.S_D0
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.SATA.SECD.S_D1
acpi_sysresource5 pnpinfo _HID=PNP0C01 _UID=1 at handle=\_SB_.RMEM
acpi_button0 pnpinfo _HID=PNP0C0C _UID=170 at handle=\_SB_.PWRB
pci_link0 pnpinfo _HID=PNP0C0F _UID=1 at handle=\_SB_.LNKA
pci_link1 pnpinfo _HID=PNP0C0F _UID=2 at handle=\_SB_.LNKB
pci_link2 pnpinfo _HID=PNP0C0F _UID=3 at handle=\_SB_.LNKC
pci_link3 pnpinfo _HID=PNP0C0F _UID=4 at handle=\_SB_.LNKD
pci_link4 pnpinfo _HID=PNP0C0F _UID=5 at handle=\_SB_.LNKE
pci_link5 pnpinfo _HID=PNP0C0F _UID=2 at handle=\_SB_.LNKF
pci_link6 pnpinfo _HID=PNP0C0F _UID=3 at handle=\_SB_.LNKG
pci_link7 pnpinfo _HID=PNP0C0F _UID=4 at handle=\_SB_.LNKH
acpi_timer0 pnpinfo unknown at unknown
ACPI I/O ports:
0x808-0x80b
acpi_hpet0 pnpinfo unknown at unknown
ACPI I/O memory addresses:
0xfed00000-0xfed003ff
apic0
legacy0
ram0
I/O memory addresses:
0x0-0x9ebff
0x100000-0x6ff9ffff
END `devinfo -rv` (w/ USB disabled) output
BEGIN `kldload -v if_re` (w/ USB disabled) output
module_register: module re/miibus already exists!
Module re/miibus failed to register: 17
module_register: module cardbus/re already exists!
Module cardbus/re failed to register: 17
module_register: module pci/re already exitsts!
Module pci/re failed to register: 17
kldload: can't load if_re: File exists
END `kldload -v if_re` (w/ USB disabled) output
For bugs matching the following criteria: Status: In Progress Changed: (is less than) 2014-06-01 Reset to default assignee and clear in-progress tags. Mail being skipped ^Triage: I'm sorry that this PR did not get addressed in a timely fashion. By now, the version that it was created against is long out of suppoprt. Please re-open if it is still a problem on a supported version. |
