Bug 161715

Summary:	[acpi] [suspend/resume] Dell E6520 doesn't resume after ACPI suspend
Product:	Base System	Reporter:	Sebastian Chmielewski <chmiels>
Component:	kern	Assignee:	freebsd-bugs (Nobody) <bugs>
Status:	Open ---
Severity:	Affects Only Me	CC:	imp
Priority:	Normal
Version:	1.0-CURRENT
Hardware:	Any
OS:	Any

Description Sebastian Chmielewski 2011-10-16 17:00:23 UTC

Dell E6520 can't resume after suspend - power is on but nothing can be
seen on LCD. I did a procedure described in Handbook:

- sysctl debug.bootverbose=1
- sysctl debug.acpi.suspend_bounce=1
- acpiconf -s 3

Output from console:

ehci0: wake_prep disabled wake for \_SB_.PCI0.EHC2 (S3)
ehci1: wake_prep disabled wake for \_SB_.PCI0.EHCI (S3)
acpi_lid0: wake_prep enabled for \_SB_.LID_ (S3)
acpi_button0: wake_prep enabled for \_SB_.PBTN (S3)
pci0:0:25:0: Transition from D3 to D0
pci0:0:27:0: Transition from D3 to D0
pci0:0:31:2: Transition from D3 to D0
pci0:1:0:0: Transition from D3 to D0
pci0:1:0:1: Transition from D3 to D0
vgapci0: calling BIOS POST
hdac1: Enabling headphone/speaker audio routing switching:
hdac1:  as=0 sense nid=11 [UNSOL]
hdac1: Pin sense: nid=11 res=0x00000000
pci0:3:0:0: Transition from D3 to D0
pci0:11:0:0: Transition from D3 to D0
pci0:11:0:1: Transition from D3 to D0
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, non CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1 cable IRM irm(1) 
mmc0: Probing bus
mmc0: SD 2.0 interface conditions: OK
mmc0: SD probe: OK (OCR: 0x00ff8000)
mmc0: Current OCR: 0x00ff8000
firewire0: fw_rcv: unknown response RRESQ(6) src=0xffc1 tl=0x1 rt=1 data=0xdd284f04
mmc0: Probing cards
mmc0: Card detected (CID 275048534430384730b00005b400a500)
mmc0: Card at relative address 7:
mmc0:  card: SD High Capacity (0x27/0x5048/"SD08G" rev 3.0 m/d 05.2010 s/n b00005b4)
mmc0:  bus: 4bit, 50MHz, high speed timing
mmc0:  memory: 15704064 blocks, erase sector 8192 blocks
mmc0: setting transfer rate to 50.000MHz (high speed timing)
ahcich0: AHCI reset...
ahcich0: SATA connect time=1000us status=00000123
ahcich0: AHCI reset: device found
ahcich1: AHCI reset...
ahcich1: SATA connect time=1800us status=00000113
ahcich1: AHCI reset: device found
ahcich1: AHCI reset: device ready after 0ms
ahcich2: AHCI reset...
ahcich2: SATA connect timeout time=10000us status=00000000
ahcich2: AHCI reset: device not found
ahcich3: AHCI reset...
ahcich3: SATA connect timeout time=10000us status=00000000
ahcich3: AHCI reset: device not found
ahcich4: AHCI reset...
ahcich4: SATA connect timeout time=10000us status=00000000
ahcich4: AHCI reset: device not found
battery1: battery0: battery2: battery initialization start
battery initialization start
battery initialization start
battery0: battery initialization done, tried 1 times
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
firewire0: ahcich0: split transaction timeout: tl=0x15 flag=0x04
AHCI reset: device ready after 100ms
send: dst=0x01 tl=0x15 rt=0 tcode=0x4 pri=0x0 src=0x000
firewire0: fw_explore_node: node1: explore_read_quads failure
firewire0: fw_rcv: unknown response RRESQ(6) src=0xffc1 tl=0x2 rt=1 data=0x34393331
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
firewire0: split transaction timeout: tl=0x16 flag=0x04
send: dst=0x01 tl=0x16 rt=0 tcode=0x4 pri=0x0 src=0x000
firewire0: fw_explore_node: node1: explore_read_quads failure
firewire0: fw_rcv: unknown response RRESQ(6) src=0xffc1 tl=0x3 rt=1 data=0x12a064f0
firewire0: split transaction timeout: tl=0x17 flag=0x04
send: dst=0x01 tl=0x17 rt=0 tcode=0x4 pri=0x0 src=0x000
firewire0: fw_explore_node: node1: explore_read_quads failure
uhub2: 6 ports with 6 removable, self powered
ugen0.3: <Dell Computer Corp> at usbus0
ubt0: <Dell Computer Corp DW375 Bluetooth Module, class 224/1, rev 2.00/5.17, addr 3> on usbus0
ugen0.4: <CN0CJ3P27248717L025LA01> at usbus0
battery2: battery initialization failed, giving up
battery1: battery initialization failed, giving up

Comment 1 Mark Linimon freebsd_committer

2011-10-17 00:08:31 UTC

Responsible Changed
From-To: freebsd-bugs->freebsd-acpi

reclassify.

Comment 2 Eitan Adler freebsd_committer

2017-12-31 08:00:06 UTC

For bugs matching the following criteria:

Status: In Progress Changed: (is less than) 2014-06-01

Reset to default assignee and clear in-progress tags.

Mail being skipped

Comment 3 Warner Losh freebsd_committer

2024-10-11 22:02:03 UTC

I know it's been a while since you filed this bug, and I apologize for the tardy response. However, no version information was given and ACPI has changed significantly since then. So has the problem been resolved? Do you even still have this laptop?