Bug 236256 - Kernel panic during install FreeBSD-12.0-RELEASE-i386-memstick - unknown reasons
Summary: Kernel panic during install FreeBSD-12.0-RELEASE-i386-memstick - unknown reasons
Status: New
Alias: None
Product: Base System
Classification: Unclassified
Component: kern (show other bugs)
Version: 12.0-RELEASE
Hardware: i386 Any
: --- Affects Only Me
Assignee: freebsd-bugs mailing list
URL:
Keywords: panic, regression
Depends on:
Blocks:
 
Reported: 2019-03-05 14:42 UTC by Fabien
Modified: 2019-03-07 16:04 UTC (History)
0 users

See Also:


Attachments

Note You need to log in before you can comment on or make changes to this bug.
Description Fabien 2019-03-05 14:42:29 UTC
Dear Developers,

I'm trying to install last FreeBSD 12.0-RELEASE in an old i386 previously supported without trouble by some old FreeBSD Release.

I modified the /boot/loader.conf from the install memstick media due to the fact that this is an appliance without screen and keyboard and only serial console.

Modified appended to /boot/loader.conf:
boot_multicons="YES"
boot_serial="YES"
comconsole_speed="19200"
console="comconsole,vidconsole"
kern.cam.boot_delay="10000"

I tried to add this line to the /boot/loader.conf as discribed in documentation to disable ACPI APIC 

hint.apic.0.disabled="1" 

Here are the details of the kernel panic:

Copyright (c) 1992-2018 The FreeBSD Project.                                   /
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994       \
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-RELEASE r341666 GENERIC i386
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(vga): resolution 640x480
CPU: AMD-K6(tm) 3D processor (400.92-MHz 586-class CPU)
  Origin="AuthenticAMD"  Id=0x58c  Family=0x5  Model=0x8  Stepping=12
  Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
  AMD Features=0x80000800<SYSCALL,3DNow!>
real memory  = 268435456 (256 MB)
avail memory = 225329152 (214 MB)
arc4random: no preloaded entropy cache
Timecounter "TSC" frequency 400920213 Hz quality 800
random: entropy device external interface
kbd1 at kbdmux0
K6-family MTRR support enabled (2 registers)
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0x15f8f40, 0) error 19
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
pcib0 pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 7.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x6400-0x641f irq 11 at device 7.2 on pci0
usbus0 on uhci0
piix0: <PIIX Timecounter> port 0x6200-0x620f at device 7.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
fxp0: <Intel 82558 Pro/100 Ethernet> port 0x6800-0x681f mem 0xe0300000-0xe0300fff,0xe0000000-0xe00fffff irq 10 at device 13.0 on p0
fxp0: EEPROM checksum mismatch! (0xbbb9 -> 0xffff)
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
fxp0: Ethernet address: ff:ff:ff:ff:ff:ff
fxp1: <Intel 82558 Pro/100 Ethernet> port 0x6c00-0x6c1f mem 0xe0302000-0xe0302fff,0xe0100000-0xe01fffff irq 12 at device 14.0 on p0
fxp1: EEPROM checksum mismatch! (0xbbb9 -> 0xffff)
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> PHY 1 on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
fxp1: Ethernet address: ff:ff:ff:ff:ff:ff
fxp2: <Intel 82558 Pro/100 Ethernet> port 0x7000-0x701f mem 0xe0301000-0xe0301fff,0xe0200000-0xe02fffff irq 5 at device 15.0 on pc0
fxp2: EEPROM checksum mismatch! (0xbbb9 -> 0xffff)
miibus2: <MII bus> on fxp2
inphy2: <i82555 10/100 media interface> PHY 1 on miibus2
inphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
fxp2: Ethernet address: ff:ff:ff:ff:ff:ff
pcib1: <PCI-PCI bridge> at device 16.0 on pci0
pci1: <PCI bus> on pcib1
dc0: <Intel 21143 10/100BaseTX> port 0xe000-0xe07f mem 0xd8000000-0xd80003ff irq 10 at device 5.0 on pci1
miibus3: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> PHY 31 on miibus3
dcphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: 00:c0:95:c4:9c:90
dc1: <Intel 21143 10/100BaseTX> port 0xe400-0xe47f mem 0xd8001000-0xd80013ff irq 12 at device 6.0 on pci1
miibus4: <MII bus> on dc1
dcphy1: <Intel 21143 NWAY media interface> PHY 31 on miibus4
dcphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc1: Ethernet address: 00:c0:95:c4:9c:91
cpu0 on motherboard
attimer0: <AT timer> at port 0x40-0x43 irq 0 pnpid PNP0100 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> at port 0x70-0x71 irq 8 pnpid PNP0b00 on isa0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 irq 1 pnpid PNP0303 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0a03> can't assign resources (port)
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 pnpid PNP0501 on isa0
uart0: console (19200,n,8,1)
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 pnpid PNP0501 on isa0
fdc0: <Enhanced floppy controller> at port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 pnpid PNP0700 on isa0
ppc0: <ECP parallel printer port> at port 0x378-0x37f,0x778-0x77a irq 7 drq 3 pnpid PNP0401 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0                                                
psmcpnp0: irq resource info is missing; assuming irq 12                       
panic: resource_list_release: resource entry is not busy                      
cpuid = 0                                                                     
time = 1
KDB: stack backtrace:
#0 0x110854f at kdb_backtrace+0x4f
#1 0x10bb517 at vpanic+0x147
#2 0x10bb3cb at panic+0x1b
#3 0x10f88a1 at resource_list_release+0x1d1
#4 0x16a4b7c at isa_release_resource+0x3c
#5 0x10f8cc5 at bus_release_resource+0x65
#6 0x159f57c at psmcpnp_probe+0x24c
#7 0x10f6835 at device_probe_child+0x165
#8 0x10f7597 at device_probe+0x77
#9 0x10f7622 at device_probe_and_attach+0x12
#10 0x1044cd2 at isa_probe_children+0x132
#11 0x16a794a at configure+0x1a
#12 0x1053507 at mi_startup+0xf7
#13 0x8f805f at btext+0x5f
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.

Kind Regards