I set the serial during booting. boot_multicons="YES" boot_serial="YES" comconsole_speed="115200" console="comconsole" And the boot logs as follow: boot_multicons=YES OK set boot_serial=YES OK comconsole_speed=115200 OK console=comconsole OK boot Loading kernel... /boot/kernel/kernel text=0x1678a68 data=0x1cd288+0x768b40 syms=[0x8+0x174cd8+0x8+0x19224a] Loading configured modules... can't find '/boot/entropy' | / - ---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-RELEASE r341666 GENERIC amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(vga): resolution 640x480 CPU: Intel(R) Xeon(R) CPU E5-2690 v3 @ 2.60GHz (2594.06-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306f2 Family=0x6 Model=0x3f Stepping=2 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffefbf7<SSE3,PCLMULQDQ,DTES64,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x21<LAHF,ABM> Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics real memory = 34359738368 (32768 MB) avail memory = 32919932928 (31394 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <INSYDE HSW-LPT> FreeBSD/SMP: Multiprocessor System Detected: 48 CPUs FreeBSD/SMP: 2 package(s) x 12 core(s) x 2 hardware threads arc4random: no preloaded entropy cache ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard ioapic2 <Version 2.0> irqs 48-71 on motherboard Launching APs: 1 23 28 38 10 16 45 3 11 4 18 13 5 21 29 7 2 22 34 14 42 24 17 12 36 9 32 19 33 46 35 20 26 41 39 27 8 25 37 44 15 43 47 30 31 40 6 Timecounter "TSC-low" frequency 1297027886 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <INSYDE HSW-LPT> on motherboard SmmInstallProtocolInterface: 0228DC7F-70E4-4BD7-A074-F9F7BBE1AAAB 0 SmmInstallProtocolInterface: CC89C099-D5DC-4AF6-A377-8A26FD75F4AD 0 acpi0: Power Button (fixed) cpu0: <ACPI CPU> numa-domain 0 on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 340 Event timer "HPET2" frequency 14318180 Hz quality 340 Event timer "HPET3" frequency 14318180 Hz quality 340 Event timer "HPET4" frequency 14318180 Hz quality 340 Event timer "HPET5" frequency 14318180 Hz quality 340 Event timer "HPET6" frequency 14318180 Hz quality 340 Event timer "HPET7" frequency 14318180 Hz quality 340 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 pci0: <ACPI PCI bus> numa-domain 0 on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 26 at device 1.0 numa-domain 0 on pci0 pci1: <ACPI PCI bus> numa-domain 0 on pcib1 AVAGO MegaRAID SAS FreeBSD mrsas driver version: 06.712.04.00-fbsd mfi0: <Invader> port 0x2000-0x20ff mem 0x92400000-0x9240ffff,0x92300000-0x923fffff irq 26 at device 0.0 numa-domain 0 on pci1 mfi0: Using MSI mfi0: Megaraid SAS driver Ver 4.23 mfi0: FW MaxCmds = 928, limiting to 128 mfi0: MaxCmd = 928, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c03a0 mfi0: 46198 (598419283s/0x0020/info) - Shutdown command received from host mfi0: 46199 (boot + 8s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/d207/19e5) mfi0: 46200 (boot + 8s/0x0020/info) - Firmware version 4.270.00-4382 mfi0: 46201 (boot + 9s/0x0020/info) - Package version 24.7.0-0057 mfi0: 46202 (boot + 9s/0x0020/info) - Board Revision mfi0: 46203 (boot + 43s/0x0004/info) - Enclosure (SES) discovered on PD 36(c Port A/p1) mfi0: 46204 (boot + 43s/0x0004/info) - Enclosure PD 36(c Port A/p1) communication restored mfi0: 46205 (boot + 43s/0x0002/info) - Inserted: Encl PD 36 mfi0: 46206 (boot + 43s/0x0002/info) - Inserted: PD 36(c Port A/p1) Info: enclPd=36, scsiType=d, portMap=00, sasAddr=500e004aaaaaaa1e,0000000000000000 mfi0: 46207 (boot + 43s/0x0002/info) - Inserted: PD 38(e0x36/s2) mfi0: 46208 (boot + 43s/0x0002/info) - Inserted: PD 38(e0x36/s2) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa02,0000000000000000 pcib2: <ACPI PCI-PCI bridge> irq 32 at device 2.0 numa-domain 0 on pci0 mfi0: 46209 (boot + 43s/0x0001/info) - Policy change on VD 00/0 to [ID=00,dcp=0d,ccp=0c,ap=0,dc=0] from [ID=00,dcp=0d,ccp=0d,ap=0,dc=0] mfi0: 46210 (boot + 43s/0x0020/info) - Controller operating temperature within normal range, full operation restored pci2: <ACPI PCI bus> numa-domain 0 on pcib2 mfi0: 46211 (598419388s/0x0020/info) - Time established as 12/18/18 3:36:28; (44 seconds since power on) mfi0: 46212 (598762800s/0x0020/info) - Patrol Read started mfi0: 46218 (598842114s/0x0002/info) - Unexpected sense: PD 38(e0x36/s2) Path 500e004aaaaaaa02, CDB: 2f 00 82 e0 00 00 00 10 00 00, Sense: 3/11/00 mfi0: 46223 (598853299s/0x0020/info) - Patrol Read complete mfi0: 46224 (599367600s/0x0020/info) - Patrol Read started mfi0: 46225 (boot + 8s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/d207/19e5) mfi0: 46226 (boot + 8s/0x0020/info) - Firmware version 4.270.00-4382 mfi0: 46227 (boot + 9s/0x0020/info) - Package version 24.7.0-0057 mfi0: 46228 (boot + 9s/0x0020/info) - Board Revision mfi0: 46229 (boot + 43s/0x0004/info) - Enclosure (SES) discovered on PD 36(c Port A/p1) mfi0: 46230 (boot + 43s/0x0004/info) - Enclosure PD 36(c Port A/p1) communication restored bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x5719001> mem 0x92290000-0x9229ffff,0x922a0000-0x922affff,0x922b0000-0x922bffff irq 32 at device 0.0 numa-domain 0 on pci2 mfi0: 46231 (boot + 43s/0x0002/info) - Inserted: Encl PD 36 mfi0: 46232 (boot + 43s/0x0002/info) - Inserted: PD 36(c Port A/p1) Info: enclPd=36, scsiType=d, portMap=00, sasAddr=500e004aaaaaaa1bge0: APE FW version: NCSI v1.2.12.0 e,0000000000000000 mfi0: 46233 (boot + 43s/0x0002/info) - Inserted: PD 39(e0x36/s5) mfi0: 46234 (boot + 43s/0x0002/info) - Inserted: PD 39(e0x36/s5) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa05,0000000000000000 mfi0: 46235 (boot + 43s/0x0020/WARN) - Previous configuration completely missing at boot bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E mfi0: 46236 (boot + 43s/0x0020/info) - Controller operating temperature within normal range, full operation restored mfi0: 46237 (600921672s/0x0020/info) - Time established as 01/16/19 2:41:12; (44 seconds since power on) mfi0: 46238 (600921673s/0x0020/WARN) - Patrol Read can't be started, as PDs are either not ONLINE, or are in a VD with an active process, or are in an excluded VD mfi0: 46239 (600924781s/0x0002/WARN) - PD 39(e0x36/s5) Path 500e004aaaaaaa05 reset (Type 03) mfi0: 46240 (600924781s/0x0002/WARN) - Removed: PD 39(e0x36/s5) mfi0: 46241 (600924781s/0x0002/info) - Removed: PD 39(e0x36/s5) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa05,0000000000000000 mfi0: 46242 (600924781s/0x0002/info) - State change on PD 39(e0x36/s5) from UNCONFIGURED_GOOD(0) to UNCONFIGURED_BAD(1) mfi0: 46243 (602044705s/0x0002/info) - Inserted: PD 39(e0x36/s5) mfi0: 46244 (602044705s/0x0002/info) - Inserted: PD 39(e0x36/s5) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa05,0000000000000000 mfi0: 46245 (602044705s/0x0002/info) - State change on PD 39(e0x36/s5) from UNCONFIGURED_BAD(1) to UNCONFIGURED_GOOD(0) miibus0: <MII bus> numa-domain 0 on bge0 mfi0: 46246 (boot + 8s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/d207/19e5) mfi0: 46247 (boot + 8s/0x0020/info) - Firmware version 4.270.00-4382 mfi0: 46248 (boot + 9s/0x0020/info) - Package version 24.7.0-0057 mfi0: 46249 (boot + 9s/0x0020/info) - Board Revision brgphy0: <BCM5719C 1000BASE-T media interface> PHY 1 on miibus0 mfi0: 46250 (boot + 43s/0x0004/info) - Enclosure (SES) discovered on PD 36(c Port A/p1) mfi0: 46251 (boot + 43s/0x0004/info) - Enclosure PD 36(c Port A/p1) communication restored mfi0: 46252 (boot + 43s/0x0002/info) - Inserted: Encl PD 36 mfi0: brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow46253 (boot + 43s/0x0002/info) - Inserted: PD 36(c Port A/p1) Info: enclPd=36, scsiType=d, portMap=00, sasAddr=500e004aaaaaaa1e,0000000000000000 mfi0: 46254 (boot + 43s/0x0002/info) - Inserted: PD 39(e0x36/s5) mfi0: 46255 (boot + 43s/0x0002/info) - Inserted: PD 39(e0x36/s5) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa05,0000000000000000 mfi0: bge0: Using defaults for TSO: 65518/35/2048 46256 (boot + 43s/0x0020/WARN) - Previous configuration completely missing at boot mfi0: 46257 (boot + 43s/0x0020/info) - Controller operating temperature within normal range, full operation restored mfi0: 46258 (602045351s/0x0020/info) - Time established as 01/29/19 2:49:11; (43 seconds since power on) bge0: Ethernet address: e8:4d:d0:b5:44:f8 mfi0: 46259 (boot + 8s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/d207/19e5) mfi0: 46260 (boot + 8s/0x0020/info) - Firmware version 4.270.00-4382 mfi0: 46261 (boot + 9s/0x0020/info) - Package version 24.7.0-0057 mfi0: 46262 (boot + 9s/0x0020/info) - Board Revision mfi0: 46263 (boot + 43s/0x0004/info) - Enclosure (SES) discovered on PD 36(c Port A/p1) mfi0: 46264 (boot + 43s/0x0004/info) - Enclosure PD 36(c Port A/p1) communication restored mfi0: 46265 (boot + 43s/0x0002/info) - Inserted: Encl PD 36 mfi0: 46266 (boot + 43s/0x0002/info) - Inserted: PD 36(c Port A/p1) Info: enclPd=36, scsiType=d, portMap=00, sasAddr=500e004aaaaaaa1e,0000000000000000 mfi0: 46267 (boot + 43s/0x0002/info) - Inserted: PD 39(e0x36/s5) mfi0: 46268 (boot + 43s/0x0002/info) - Inserted: PD 39(e0x36/s5) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa05,0000000000000000 mfi0: 46269 (boot + 43s/0x0020/WARN) - Previous configuration completely missing at boot bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x5719001> mem 0x92260000-0x9226ffff,0x92270000-0x9227ffff,0x92280000-0x9228ffff irq 36 at device 0.1 numa-domain 0 on pci2 mfi0: 46270 (boot + 50s/0x0020/info) - Controller operating temperature within normal range, full operation restored mfi0: 46271 (602045495s/0x0020/info) - Time established as 01/29/19 2:51:35; (56 seconds since power on) mfi0: 46272 (602045495s/0x0040/info) - Foreign Configuration Detected mfi0: bge1: APE FW version: NCSI v1.2.12.0 bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E 46273 (602045500s/0x0040/info) - Foreign Configuration Detected mfi0: 46274 (602045500s/0x0040/info) - Foreign Configuration Cleared mfi0: 46275 (602045503s/0x0020/info) - Boot Device reset, setting target ID as invalid mfi0: 46276 (602045503s/0x0040/info) - Configuration cleared mfi0: 46277 (602045507s/0x0020/info) - Controller properties changed mfi0: 46278 (602045512s/0x0020/info) - Boot Device reset, setting target ID as invalid mfi0: 46279 (602045512s/0x0040/info) - Configuration cleared mfi0: 46280 (602062804s/0x0002/WARN) - PD 39(e0x36/s5) Path 500e004aaaaaaa05 reset (Type 03) mfi0: 46281 (602062804s/0x0002/WARN) - Removed: PD 39(e0x36/s5) mfi0: 46282 (602062804s/0x0002/info) - Removed: PD 39(e0x36/s5) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa05,0000000000000000 miibus1: <MII bus> numa-domain 0 on bge1 mfi0: 46283 (602062804s/0x0002/info) - State change on PD 39(e0x36/s5) from UNCONFIGURED_GOOD(0) to UNCONFIGURED_BAD(1) mfi0: 46284 (602062813s/0x0002/info) - Inserted: PD 39(e0x36/s5) mfi0: 46285 (602062813s/0x0002/info) - Inserted: PD 39(e0x36/s5) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa05,0000000000000000 brgphy1: <BCM5719C 1000BASE-T media interface> PHY 2 on miibus1 mfi0: 46286 (602062813s/0x0002/info) - State change on PD 39(e0x36/s5) from UNCONFIGURED_BAD(1) to UNCONFIGURED_GOOD(0) mfi0: 46287 (602062819s/0x0040/info) - Foreign Configuration Detected mfi0: 46288 (602062845s/0x0040/info) - Foreign Configuration Detected brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Using defaults for TSO: 65518/35/2048 bge1: Ethernet address: e8:4d:d0:b5:44:f9 mfi0: 46289 (602062845s/0x0040/info) - Foreign Configuration Cleared mfi0: 46290 (602062874s/0x0002/WARN) - PD 39(e0x36/s5) Path 500e004aaaaaaa05 reset (Type 03) mfi0: 46291 (602062874s/0x0002/WARN) - Removed: PD 39(e0x36/s5) mfi0: 46292 (602062874s/0x0002/info) - Removed: PD 39(e0x36/s5) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa05,0000000000000000 mfi0: 46293 (602062874s/0x0002/info) - State change on PD 39(e0x36/s5) from UNCONFIGURED_GOOD(0) to UNCONFIGURED_BAD(1) mfi0: 46294 (602218404s/0x0002/info) - Inserted: PD 45(e0x36/s5) mfi0: 46295 (602218404s/0x0002/info) - Inserted: PD 45(e0x36/s5) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=560081090b9c6000,0000000000000000 mfi0: 46296 (602218410s/0x0040/info) - Foreign Configuration Detected mfi0: 46297 (602218453s/0x0040/info) - Foreign Configuration Detected mfi0: 46298 (602218453s/0x0040/info) - Foreign Configuration Cleared mfi0: 46299 (602218456s/0x0020/info) - Boot Device reset, setting target ID as invalid mfi0: 46300 (602218456s/0x0040/info) - Configuration cleared bge2: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x5719001> mem 0x92230000-0x9223ffff,0x92240000-0x9224ffff,0x92250000-0x9225ffff irq 32 at device 0.2 numa-domain 0 on pci2 mfi0: 46301 (602218468s/0x0002/info) - State change on PD 45(e0x36/s5) from UNCONFIGURED_GOOD(0) to ONLINE(18) mfi0: 46302 (602218468s/0x0001/info) - VD 00/0 is now OPTIMAL mfi0: 46303 (602218468s/0x0041/info) - Created VD 00/0 mfi0: 46304 (602218468s/0x0001/info) - VD 00/0 is available bge2: APE FW version: NCSI v1.2.12.0 bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E mfi0: 46305 (602218468s/0x0001/info) - Policy change on VD 00/0 to [ID=00,dcp=0d,ccp=0c,ap=0,dc=0] from [ID=00,dcp=0d,ccp=0d,ap=0,dc=0] mfi0: 46306 (602218468s/0x0001/info) - Fast initialization started on VD 00/0 mfi0: 46307 (602218468s/0x0001/info) - Initialization complete on VD 00/0 mfi0: 46308 (602218468s/0x0020/info) - Controller requests a host bus rescan mfi0: 46309 (602218477s/0x0001/info) - Erase started on VD 00/0 mfi0: 46311 (602218618s/0x0020/info) - Boot Device reset, setting target ID as invalid mfi0: 46312 (602218618s/0x0040/info) - Configuration cleared mfi0: 46313 (602218618s/0x0002/info) - State change on PD 45(e0x36/s5) from ONLINE(18) to UNCONFIGURED_GOOD(0) mfi0: 46314 (602218622s/0x0020/info) - Boot Device reset, setting target ID as invalid mfi0: 46315 (602218622s/0x0040/info) - Configuration cleared mfi0: 46316 (602218626s/0x0020/info) - Boot Device reset, setting target ID as invalid mfi0: 46317 (602218626s/0x0040/info) - Configuration cleared mfi0: 46318 (602218629s/0x0020/info) - Boot Device reset, setting target ID as invalid mfi0: 46319 (602218629s/0x0040/info) - Configuration cleared mfi0: 46320 (602218670s/0x0020/info) - Boot Device reset, setting target ID as invalid mfi0: 46321 (602218670s/0x0040/info) - Configuration cleared mfi0: 46322 (602220199s/0x0002/WARN) - PD 45(e0x36/s5) Path 560081090b9c6000 reset (Type 03) mfi0: 46323 (602220199s/0x0002/WARN) - Removed: PD 45(e0x36/s5) mfi0: 46324 (602220199s/0x0002/info) - Removed: PD 45(e0x36/s5) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=560081090b9c6000,0000000000000000 mfi0: 46325 (602220199s/0x0002/info) - State change on PD 45(e0x36/s5) from UNCONFIGURED_GOOD(0) to UNCONFIGURED_BAD(1) mfi0: 46326 (602223527s/0x0002/info) - Inserted: PD 3b(e0x36/s8) miibus2: <MII bus> numa-domain 0 on bge2 mfi0: 46327 (602223527s/0x0002/info) - Inserted: PD 3b(e0x36/s8) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa08,0000000000000000 mfi0: 46328 (602223654s/0x0002/info) - State change on PD 3b(e0x36/s8) from UNCONFIGURED_GOOD(0) to ONLINE(18) mfi0: 46329 (602223654s/0x0001/info) - VD 00/0 is now OPTIMAL brgphy2: <BCM5719C 1000BASE-T media interface> PHY 3 on miibus2 mfi0: 46330 (602223654s/0x0041/info) - Created VD 00/0 mfi0: 46331 (602223654s/0x0001/info) - VD 00/0 is available mfi0: 46332 (602223654s/0x0001/info) - Policy change on VD 00/0 to [ID=00,dcp=05,ccp=04,ap=0,dc=0] from [ID=00,dcp=05,ccp=05,ap=0,dc=0] brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge2: Using defaults for TSO: 65518/35/2048 bge2: Ethernet address: e8:4d:d0:b5:44:fa mfi0: 46333 (602223660s/0x0020/info) - Boot Device reset, setting target ID as invalid mfi0: 46334 (602223660s/0x0040/info) - Configuration cleared mfi0: 46335 (602223660s/0x0002/info) - State change on PD 3b(e0x36/s8) from ONLINE(18) to UNCONFIGURED_GOOD(0) mfi0: 46336 (602223738s/0x0002/WARN) - PD 3b(e0x36/s8) Path 500e004aaaaaaa08 reset (Type 03) mfi0: 46337 (602223738s/0x0002/WARN) - Removed: PD 3b(e0x36/s8) mfi0: 46338 (602223738s/0x0002/info) - Removed: PD 3b(e0x36/s8) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa08,0000000000000000 mfi0: 46339 (602223738s/0x0002/info) - State change on PD 3b(e0x36/s8) from UNCONFIGURED_GOOD(0) to UNCONFIGURED_BAD(1) mfi0: 46340 (602225836s/0x0020/info) - Boot Device reset, setting target ID as invalid mfi0: 46341 (602225836s/0x0040/info) - Configuration cleared mfi0: 46342 (boot + 8s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/d207/19e5) mfi0: 46343 (boot + 8s/0x0020/info) - Firmware version 4.270.00-4382 mfi0: 46344 (boot + 9s/0x0020/info) - Package version 24.7.0-0057 mfi0: 46345 (boot + 9s/0x0020/info) - Board Revision mfi0: bge3: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x5719001> mem 0x92200000-0x9220ffff,0x92210000-0x9221ffff,0x92220000-0x9222ffff irq 36 at device 0.3 numa-domain 0 on pci2 46346 (boot + 43s/0x0004/info) - Enclosure (SES) discovered on PD 36(c Port A/p1) mfi0: 46347 (boot + 43s/0x0004/info) - Enclosure PD 36(c Port A/p1) communication restored mfi0: 46348 (boot + 43s/0x0002/info) - Inserted: Encl PD 36 bge3: APE FW version: NCSI v1.2.12.0 bge3: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E mfi0: 46349 (boot + 43s/0x0002/info) - Inserted: PD 36(c Port A/p1) Info: enclPd=36, scsiType=d, portMap=00, sasAddr=500e004aaaaaaa1e,0000000000000000 mfi0: 46350 (boot + 43s/0x0002/info) - Inserted: PD 38(e0x36/s2) mfi0: 46351 (boot + 43s/0x0002/info) - Inserted: PD 38(e0x36/s2) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa02,0000000000000000 mfi0: 46352 (boot + 43s/0x0002/info) - Inserted: PD 39(e0x36/s5) mfi0: 46353 (boot + 43s/0x0002/info) - Inserted: PD 39(e0x36/s5) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa05,0000000000000000 mfi0: 46354 (boot + 43s/0x0002/info) - Inserted: PD 3b(e0x36/s8) mfi0: 46355 (boot + 43s/0x0002/info) - Inserted: PD 3b(e0x36/s8) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa08,0000000000000000 mfi0: 46356 (boot + 48s/0x0020/info) - Boot Device reset, setting target ID as invalid mfi0: 46357 (boot + 48s/0x0020/info) - Controller operating temperature within normal range, full operation restored mfi0: 46358 (606908248s/0x0020/info) - Time established as 03/26/19 9:37:28; (54 seconds since power on) mfi0: 46359 (606908248s/0x0040/info) - Foreign Configuration Detected mfi0: 46360 (606908249s/0x0020/WARN) - Patrol Read can't be started, as PDs are either not ONLINE, or are in a VD with an active process, or are in an excluded VD mfi0: 46361 (606908254s/0x0040/info) - Foreign Configuration Detected mfi0: 46362 (606908254s/0x0040/info) - Foreign Configuration Cleared mfi0: 46363 (606908254s/0x0040/info) - Foreign Configuration Detected mfi0: 46364 (606908254s/0x0040/info) - Foreign Configuration Cleared mfi0: 46365 (606908264s/0x0002/info) - State change on PD 38(e0x36/s2) from UNCONFIGURED_GOOD(0) to ONLINE(18) mfi0: 46366 (606908264s/0x0001/info) - VD 00/0 is now OPTIMAL mfi0: 46367 (606908264s/0x0041/info) - Created VD 00/0 mfi0: 46368 (606908264s/0x0001/info) - VD 00/0 is available miibus3: <MII bus> numa-domain 0 on bge3 mfi0: 46369 (606908264s/0x0001/info) - Policy change on VD 00/0 to [ID=00,dcp=0d,ccp=0c,ap=0,dc=0] from [ID=00,dcp=0d,ccp=0d,ap=0,dc=0] mfi0: 46370 (606908264s/0x0001/info) - Fast initialization started on VD 00/0 mfi0: 46371 (606908264s/0x0001/info) - Initialization complete on VD 00/0 mfi0: brgphy3: <BCM5719C 1000BASE-T media interface> PHY 4 on miibus3 46372 (606908264s/0x0020/info) - Controller requests a host bus rescan mfi0: 46373 (606908273s/0x0001/info) - Erase started on VD 00/0 mfi0: 46374 (606908285s/0x0002/info) - State change on PD 39(e0x36/s5) from UNCONFIGURED_GOOD(0) to ONLINE(18) mfi0: brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge3: Using defaults for TSO: 65518/35/2048 bge3: Ethernet address: e8:4d:d0:b5:44:fb 46375 (606908285s/0x0001/info) - VD 01/1 is now OPTIMAL mfi0: 46376 (606908285s/0x0041/info) - Created VD 01/1 mfi0: 46377 (606908285s/0x0001/info) - VD 01/1 is available mfi0: 46378 (606908286s/0x0001/info) - Policy change on VD 00/0 to [ID=00,dcp=0d,ccp=0d,ap=0,dc=0] from [ID=00,dcp=0d,ccp=0c,ap=0,dc=0] mfi0: 46379 (606908286s/0x0001/info) - Policy change on VD 00/0 to [ID=00,dcp=0d,ccp=0c,ap=0,dc=0] from [ID=00,dcp=0d,ccp=0d,ap=0,dc=0] mfi0: 46380 (606908286s/0x0001/info) - Policy change on VD 01/1 to [ID=01,dcp=0d,ccp=0c,ap=0,dc=0] from [ID=01,dcp=0d,ccp=0d,ap=0,dc=0] mfi0: 46381 (606908286s/0x0001/info) - Fast initialization started on VD 01/1 mfi0: pcib3: <ACPI PCI-PCI bridge> irq 32 at device 2.2 numa-domain 0 on pci0 46382 (606908286s/0x0001/info) - Initialization complete on VD 01/1 mfi0: 46383 (606908286s/0x0020/info) - Controller requests a host bus rescan mfi0: 46385 (606908296s/0x0001/info) - Erase started on VD 01/1 mfi0: 46386 (606908308s/0x0002/info) - State change on PD 3b(e0x36/s8) from UNCONFIGURED_GOOD(0) to ONLINE(18) pci3: <ACPI PCI bus> numa-domain 0 on pcib3 mfi0: 46387 (606908308s/0x0001/info) - VD 02/2 is now OPTIMAL mfi0: 46388 (606908308s/0x0041/info) - Created VD 02/2 mfi0: 46389 (606908308s/0x0001/info) - VD 02/2 is available mfi0: 46390 (606908308s/0x0001/info) - Policy change on VD 00/0 to [ID=00,dcp=0d,ccp=0d,ap=0,dc=0] from [ID=00,dcp=0d,ccp=0c,ap=0,dc=0] mfi0: 46391 (606908308s/0x0001/info) - Policy change on VD 00/0 to [ID=00,dcp=0d,ccp=0c,ap=0,dc=0] from [ID=00,dcp=0d,ccp=0d,ap=0,dc=0] mfi0: 46392 (606908308s/0x0001/info) - Policy change on VD 01/1 to [ID=01,dcp=0d,ccp=0d,ap=0,dc=0] from [ID=01,dcp=0d,ccp=0c,ap=0,dc=0] mfi0: 46393 (606908308s/0x0001/info) - Policy change on VD 01/1 to [ID=01,dcp=0d,ccp=0c,ap=0,dc=0] from [ID=01,dcp=0d,ccp=0d,ap=0,dc=0] mfi0: 46394 (606908308s/0x0001/info) - Policy change on VD 02/2 to [ID=02,dcp=0d,ccp=0c,ap=0,dc=0] from [ID=02,dcp=0d,ccp=0d,ap=0,dc=0] mfi0: pcib4: <ACPI PCI-PCI bridge> irq 40 at device 3.0 numa-domain 0 on pci0 46395 (606908309s/0x0001/info) - Fast initialization started on VD 02/2 mfi0: 46396 (606908309s/0x0001/info) - Initialization complete on VD 02/2 mfi0: 46397 (606908309s/0x0020/info) - Controller requests a host bus rescan mfi0: 46400 (606908328s/0x0001/info) - Erase started on VD 02/2 pci4: <ACPI PCI bus> numa-domain 0 on pcib4 mfi0: 46598 (606910075s/0x0001/info) - Erase complete on VD 00/0 mfi0: 46599 (606910075s/0x0041/info) - Deleted VD 00/0 mfi0: 46600 (606910075s/0x0002/info) - State change on PD 38(e0x36/s2) from ONLINE(18) to UNCONFIGURED_GOOD(0) mfi0: 46601 (606910075s/0x0020/info) - Controller requests a host bus rescan mfi0: 46608 (boot + 8s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/d207/19e5) mfi0: 46609 (boot + 8s/0x0020/info) - Firmware version 4.270.00-4382 mfi0: 46610 (boot + 9s/0x0020/info) - Package version 24.7.0-0057 mfi0: 46611 (boot + 9s/0x0020/info) - Board Revision mfi0: 46612 (boot + 43s/0x0004/info) - Enclosure (SES) discovered on PD 36(c Port A/p1) mfi0: 46613 (boot + 43s/0x0004/info) - Enclosure PD 36(c Port A/p1) communication restored mfi0: 46614 (boot + 43s/0x0002/info) - Inserted: Encl PD 36 mfi0: 46615 (boot + 43s/0x0002/info) - Inserted: PD 36(c Port A/p1) Info: enclPd=36, scsiType=d, portMap=00, sasAddr=500e004aaaaaaa1e,0000000000000000 mfi0: 46616 (boot + 43s/0x0002/info) - Inserted: PD 38(e0x36/s2) mfi0: 46617 (boot + 43s/0x0002/info) - Inserted: PD 38(e0x36/s2) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa02,0000000000000000 mfi0: 46618 (boot + 43s/0x0002/info) - Inserted: PD 39(e0x36/s5) mfi0: 46619 (boot + 43s/0x0002/info) - Inserted: PD 39(e0x36/s5) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa05,0000000000000000 mfi0: 46620 (boot + 43s/0x0002/info) - Inserted: PD 3b(e0x36/s8) mfi0: 46621 (boot + 43s/0x0002/info) - Inserted: PD 3b(e0x36/s8) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa08,0000000000000000 mfi0: 46622 (boot + 43s/0x0001/info) - Policy change on VD 01/0 to [ID=01,dcp=0d,ccp=0c,ap=0,dc=0] from [ID=01,dcp=0d,ccp=0d,ap=0,dc=0] mfi0: 46623 (boot + 43s/0x0001/info) - Policy change on VD 02/1 to [ID=02,dcp=0d,ccp=0c,ap=0,dc=0] from [ID=02,dcp=0d,ccp=0d,ap=0,dc=0] mfi0: 46624 (boot + 49s/0x0001/info) - Setting VD 01/0 as boot device mfi0: 46625 (boot + 49s/0x0020/info) - Controller operating temperature within normal range, full operation restored mfi0: 46626 (boot + 49s/0x0001/info) - Erase started on VD 02/1 mfi0: 46627 (606914831s/0x0020/info) - Time established as 03/26/19 11:27:11; (55 seconds since power on) mfi0: 46628 (606914842s/0x0001/info) - Erase started on VD 01/0 mfi0: 46706 (606916210s/0x0002/WARN) - PD 38(e0x36/s2) Path 500e004aaaaaaa02 reset (Type 03) mfi0: 46707 (606916210s/0x0002/WARN) - Removed: PD 38(e0x36/s2) mfi0: 46708 (606916210s/0x0002/info) - Removed: PD 38(e0x36/s2) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa02,0000000000000000 mfi0: 46709 (606916210s/0x0002/info) - State change on PD 38(e0x36/s2) from UNCONFIGURED_GOOD(0) to UNCONFIGURED_BAD(1) mfi0: 46741 (606916745s/0x0001/info) - Erase complete on VD 01/0 mfi0: 46742 (606916745s/0x0041/info) - Deleted VD 01/0 mfi0: 46743 (606916745s/0x0002/info) - State change on PD 39(e0x36/s5) from ONLINE(18) to UNCONFIGURED_GOOD(0) mfi0: 46744 (606916745s/0x0020/info) - Controller requests a host bus rescan mfi0: 46829 (boot + 8s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/d207/19e5) mfi0: 46830 (boot + 8s/0x0020/info) - Firmware version 4.270.00-4382 mfi0: 46831 (boot + 9s/0x0020/info) - Package version 24.7.0-0057 mfi0: 46832 (boot + 9s/0x0020/info) - Board Revision mfi0: 46833 (boot + 43s/0x0004/info) - Enclosure (SES) discovered on PD 36(c Port A/p1) mfi0: 46834 (boot + 43s/0x0004/info) - Enclosure PD 36(c Port A/p1) communication restored mfi0: 46835 (boot + 43s/0x0002/info) - Inserted: Encl PD 36 pci0: <unknown> at device 17.0 (no driver attached) mfi0: 46836 (boot + 43s/0x0002/info) - Inserted: PD 36(c Port A/p1) Info: enclPd=36, scsiType=d, portMap=00, sasAddr=500e004aaaaaaa1e,0000000000000000 mfi0: 46837 (boot + 43s/0x0002/info) - Inserted: PD 39(e0x36/s5) mfi0: 46838 (boot + 43s/0x0002/info) - Inserted: PD 39(e0x36/s5) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa05,0000000000000000 mfi0: 46839 (boot + 43s/0x0002/info) - Inserted: PD 3b(e0x36/s8) mfi0: 46840 (boot + 43s/0x0002/info) - Inserted: PD 3b(e0x36/s8) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa08,0000000000000000 mfi0: 46841 (boot + 43s/0x0001/info) - Policy change on VD 02/0 to [ID=02,dcp=0d,ccp=0c,ap=0,dc=0] from [ID=02,dcp=0d,ccp=0d,ap=0,dc=0] mfi0: 46842 (boot + 49s/0x0020/info) - Controller operating temperature within normal range, full operation restored ahci0: <Intel Wellsburg AHCI SATA controller> port 0x3078-0x307f,0x308c-0x308f,0x3070-0x3077,0x3088-0x308b,0x3040-0x305f mem 0x92502000-0x925027ff irq 16 at device 17.4 numa-domain 0 on pci0 mfi0: 46843 (606967778s/0x0020/info) - Time established as 03/27/19 2:09:38; (55 seconds since power on) mfi0: 46844 (606967805s/0x0041/info) - Deleted VD 02/0 mfi0: 46845 (606967805s/0x0002/info) - State change on PD 3b(e0x36/s8) from ONLINE(18) to UNCONFIGURED_GOOD(0) mfi0: ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported 46846 (boot + 8s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/d207/19e5) mfi0: 46847 (boot + 8s/0x0020/info) - Firmware version 4.270.00-4382 mfi0: 46848 (boot + 9s/0x0020/info) - Package version 24.7.0-0057 mfi0: 46849 (boot + 9s/0x0020/info) - Board Revision ahcich0: <AHCI channel> at channel 0 on ahci0 mfi0: 46850 (boot + 43s/0x0004/info) - Enclosure (SES) discovered on PD 36(c Port A/p1) mfi0: 46851 (boot + 43s/0x0004/info) - Enclosure PD 36(c Port A/p1) communication restored mfi0: 46852 (boot + 43s/0x0002/info) - Inserted: Encl PD 36 mfi0: ahcich1: <AHCI channel> at channel 1 on ahci0 46853 (boot + 43s/0x0002/info) - Inserted: PD 36(c Port A/p1) Info: enclPd=36, scsiType=d, portMap=00, sasAddr=500e004aaaaaaa1e,0000000000000000 mfi0: 46854 (boot + 43s/0x0002/info) - Inserted: PD 39(e0x36/s5) mfi0: 46855 (boot + 43s/0x0002/info) - Inserted: PD 39(e0x36/s5) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa05,0ahcich2: <AHCI channel> at channel 2 on ahci0 000000000000000 mfi0: 46856 (boot + 43s/0x0002/info) - Inserted: PD 3b(e0x36/s8) mfi0: 46857 (boot + 43s/0x0002/info) - Inserted: PD 3b(e0x36/s8) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa08,0000000000000000 mfi0: 46858 (boot + 43s/0x0020/info) - Controller operating temperature within normal range, full operation restored ahcich3: <AHCI channel> at channel 3 on ahci0 mfi0: 46859 (606967923s/0x0020/info) - Time established as 03/27/19 2:12:03; (45 seconds since power on) mfi0: 46860 (boot + 8s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/d207/19e5) mfi0: 46861 (boot + 8s/0x0020/info) - Firmware version 4.270.00-4382 mfi0: ahciem0: <AHCI enclosure management bridge> on ahci0 46862 (boot + 9s/0x0020/info) - Package version 24.7.0-0057 mfi0: 46863 (boot + 9s/0x0020/info) - Board Revision mfi0: 46864 (boot + 43s/0x0004/info) - Enclosure (SES) discovered on PD 36(c Port A/p1) mfi0: 46865 (boot + 43s/0x0004/info) - Enclosure PD 36(c Port A/p1) communication restored mfi0: 46866 (boot + 43s/0x0002/info) - Inserted: Encl PD 36 mfi0: 46867 (boot + 43s/0x0002/info) - Inserted: PD 36(c Port A/p1) Info: enclPd=36, scsiType=d, portMap=00, sasAddr=500e004aaaaaaa1e,0000000000000000 mfi0: 46868 (boot + 43s/0x0002/info) - Inserted: PD 38(e0x36/s2) mfi0: 46869 (boot + 43s/0x0002/info) - Inserted: PD 38(e0x36/s2) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa02,0000000000000000 mfi0: 46870 (boot + 43s/0x0020/info) - Controller operating temperature within normal range, full operation restored mfi0: 46871 (608977456s/0x0020/info) - Time established as 04/19/19 8:24:16; (45 seconds since power on) mfi0: 46872 (boot + 8s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/d207/19e5) mfi0: xhci0: <Intel Wellsburg USB 3.0 controller> mem 0x3fffff00000-0x3fffff0ffff irq 16 at device 20.0 numa-domain 0 on pci0 xhci0: 32 bytes context size, 64-bit DMA 46873 (boot + 8s/0x0020/info) - Firmware version 4.270.00-4382 mfi0: 46874 (boot + 9s/0x0020/info) - Package version 24.7.0-0057 mfi0: 46875 (boot + 9s/0x0020/info) - Board Revision mfi0: 46876 (boot + 43s/0x0004/info) - Enclosure (SES) discovered on PD 36(c Port A/p1) mfi0: 46877 (boot + 43s/0x0004/info) - Enclosure PD 36(c Port A/p1) communication restored usbus0: waiting for BIOS to give up control mfi0: 46878 (boot + 43s/0x0002/info) - Inserted: Encl PD 36 mfi0: 46879 (boot + 43s/0x0002/info) - Inserted: PD 36(c Port A/p1) Info: enclPd=36, scsiType=d, portMap=00, sasAddr=500e004aaaaaaa1e,0000000000000000 mfi0: 46880 (boot + 43s/0x0002/info) - Inserted: PD 38(e0x36/s2) mfi0: 46881 (boot + 43s/0x0002/info) - Inserted: PD 38(e0x36/s2) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa02,0000000000000000 mfi0: 46882 (boot + 43s/0x0020/info) - Controller operating temperature within normal range, full operation restored usbus0 numa-domain 0 on xhci0 mfi0: 46883 (608989884s/0x0020/info) - Time established as 04/19/19 11:51:24; (45 seconds since power on) mfi0: 46884 (608989988s/0x0002/info) - State change on PD 38(e0x36/s2) from UNCONFIGURED_GOOD(0) to ONLINE(18) mfi0: 46885 (608989988s/0x0001/info) - VD 00/0 is now OPTIMAL mfi0: 46886 (608989988s/0x0041/info) - Created VD 00/0 mfi0: 46887 (608989988s/0x0001/info) - VD 00/0 is available mfi0: 46888 (608989989s/0x0001/info) - Policy change on VD 00/0 to [ID=00,dcp=05,ccp=04,ap=0,dc=0] from [ID=00,dcp=05,ccp=05,ap=0,dcusbus0: 5.0Gbps Super Speed USB v3.0 =0] mfi0: 46889 (608989989s/0x0001/info) - VD 00/0 Properties updated to [ID=00,dcp=05,ccp=04,ap=0,dc=0,dbgi=0,dps=00,cps=fe] mfi0: 46890 (boot + 8s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/d207/19e5) mfi0: 46891 (boot + 8s/0x0020/info) - Firmware version 4.270.00-4382 mfi0: 46892 (boot + 9s/0x0020/info) - Package version 24.7.0-0057 mfi0: 46893 (boot + 9s/0x0020/info) - Board Revision mfi0: 46894 (boot + 43s/0x0004/info) - Enclosure (SES) discovered on PD 36(c Port A/p1) pci0: <simple comms> at device 22.0 (no driver attached) mfi0: 46895 (boot + 43s/0x0004/info) - Enclosure PD 36(c Port A/p1) communication restored mfi0: 46896 (boot + 43s/0x0002/info) - Inserted: Encl PD 36 mfi0: 46897 (boot + 43s/0x0002/info) - Inserted: PD 36(c Port A/p1) Info: enclPd=36, scsiType=d, portMap=00, sasAddr=500e004aaaaaaa1e,0000000000000000 mfi0: 46898 (boot + 43s/0x0002/info) - Inserted: PD 38(e0x36/s2) mfi0: 46899 (boot + 43s/0x0002/info) - Inserted: PD 38(e0x36/s2) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa02,0000000000000000 mfi0: 46900 (boot + 43s/0x0001/info) - Policy change on VD 00/0 to [ID=00,dcp=05,ccp=04,ap=0,dc=0] from [ID=00,dcp=05,ccp=05,ap=0,dc=0] mfi0: 46901 (boot + 48s/0x0020/info) - Controller operating temperature within normal range, full operation restored mfi0: 46902 (608990152s/0x0020/info) - Time established as 04/19/19 11:55:52; (54 seconds since power on) mfi0: 46903 (608990422s/0x0020/WARN) - Host driver needs to be upgraded to enable extended LD support mfi0: pci0: <simple comms> at device 22.1 (no driver attached) 46904 (boot + 8s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/d207/19e5) mfi0: 46905 (boot + 8s/0x0020/info) - Firmware version 4.270.00-4382 mfi0: 46906 (boot + 9s/0x0020/info) - Package version 24.7.0-0057 mfi0: 46907 (boot + 9s/0x0020/info) - Board Revision mfi0: 46908 (boot + 43s/0x0004/info) - Enclosure (SES) discovered on PD 36(c Port A/p1) mfi0: 46909 (boot + 43s/0x0004/info) - Enclosure PD 36(c Port A/p1) communication restored mfi0: 46910 (boot + 43s/0x0002/info) - Inserted: Encl PD 36 mfi0: 46911 (boot + 43s/0x0002/info) - Inserted: PD 36(c Port A/p1) Info: enclPd=36, scsiType=d, portMap=00, sasAddr=500e004aaaaaaa1e,0000000000000000 mfi0: 46912 (boot + 43s/0x0002/info) - Inserted: PD 38(e0x36/s2) ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x92504000-0x925043ff irq 16 at device 26.0 numa-domain 0 on pci0 mfi0: usbus1: EHCI version 1.0 46913 (boot + 43s/0x0002/info) - Inserted: PD 38(e0x36/s2) Info: enclPd=36, scsiType=0, portMap=00, sasAddr=500e004aaaaaaa02,0000000000000000 mfi0: 46914 (boot + 43s/0x0001/info) - Policy change on VD 00/0 to [ID=00,dcp=05,ccp=04,ap=0,dc=0] from [ID=00,dcp=05,ccp=05,ap=0,dc=0] mfi0: 46915 (boot + 48s/0x0020/info) - Controller operating temperature within normal range, full operation restored usbus1 numa-domain 0 on ehci0 mfi0: 46916 (608990633s/0x0020/info) - Time established as 04/19/19 12:03:53; (54 seconds since power on) mfi0: 46917 (608992359s/0x0020/WARN) - Host driver needs to be upgraded to enable extended LD support usbus1: 480Mbps High Speed USB v2.0 pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci0 pci5: <ACPI PCI bus> numa-domain 0 on pcib5 pcib6: <ACPI PCI-PCI bridge> irq 18 at device 28.2 numa-domain 0 on pci0 pci6: <ACPI PCI bus> numa-domain 0 on pcib6 vgapci0: <VGA-compatible display> mem 0x90000000-0x91ffffff,0x92000000-0x921fffff irq 18 at device 0.0 numa-domain 0 on pci6 vgapci0: Boot video device pcib7: <ACPI PCI-PCI bridge> irq 19 at device 28.3 numa-domain 0 on pci0 pci7: <ACPI PCI bus> numa-domain 0 on pcib7 ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x92503000-0x925033ff irq 23 at device 29.0 numa-domain 0 on pci0 usbus2: EHCI version 1.0 usbus2 numa-domain 0 on ehci1 usbus2: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0 isa0: <ISA bus> numa-domain 0 on isab0 ahci1: <Intel Wellsburg AHCI SATA controller> port 0x3068-0x306f,0x3084-0x3087,0x3060-0x3067,0x3080-0x3083,0x3020-0x303f mem 0x92501000-0x925017ff irq 19 at device 31.2 numa-domain 0 on pci0 ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich4: <AHCI channel> at channel 0 on ahci1 ahcich5: <AHCI channel> at channel 1 on ahci1 ahcich6: <AHCI channel> at channel 2 on ahci1 ahcich7: <AHCI channel> at channel 3 on ahci1 ahcich8: <AHCI channel> at channel 4 on ahci1 ahcich9: <AHCI channel> at channel 5 on ahci1 ahciem1: <AHCI enclosure management bridge> on ahci1 pcib8: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 1 on acpi0 pci8: <ACPI PCI bus> numa-domain 1 on pcib8 pcib9: <ACPI Host-PCI bridge> on acpi0 pci9: <ACPI PCI bus> on pcib9 pci9: <dasp, performance counters> at device 8.2 (no driver attached) pci9: <dasp, performance counters> at device 9.2 (no driver attached) pci9: <dasp, performance counters> at device 11.1 (no driver attached) pci9: <dasp, performance counters> at device 11.2 (no driver attached) pci9: <dasp, performance counters> at device 16.1 (no driver attached) pci9: <dasp, performance counters> at device 16.6 (no driver attached) pci9: <dasp, performance counters> at device 18.1 (no driver attached) pci9: <dasp, performance counters> at device 18.5 (no driver attached) pcib10: <ACPI Host-PCI bridge> on acpi0 pci10: <ACPI PCI bus> on pcib10 pci10: <dasp, performance counters> at device 8.2 (no driver attached) pci10: <dasp, performance counters> at device 9.2 (no driver attached) pci10: <dasp, performance counters> at device 11.1 (no driver attached) pci10: <dasp, performance counters> at device 11.2 (no driver attached) pci10: <dasp, performance counters> at device 16.1 (no driver attached) pci10: <dasp, performance counters> at device 16.6 (no driver attached) pci10: <dasp, performance counters> at device 18.1 (no driver attached) pci10: <dasp, performance counters> at device 18.5 (no driver attached) acpi_syscontainer0: <System Container> on acpi0 acpi_syscontainer1: <System Container> on acpi0 acpi_syscontainer2: <System Container> on acpi0 uart0: <16650 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (115200,n,8,1) orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xce000-0xd57ff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b9300001a00 device_attach: est0 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1bbb00001a00 device_attach: est1 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1bbb00001a00 device_attach: est2 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b9300001a00 device_attach: est3 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b9300001a00 device_attach: est4 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1bbb00001a00 device_attach: est5 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1bbb00001a00 device_attach: est6 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1bbb00001a00 device_attach: est7 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b9300001a00 device_attach: est8 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b9300001a00 device_attach: est9 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b9300001a00 device_attach: est10 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b9300001a00 device_attach: est11 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1bbb00001a00 device_attach: est12 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1bbb00001a00 device_attach: est13 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1bbb00001a00 device_attach: est14 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b9300001a00 device_attach: est15 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1bbb00001a00 device_attach: est16 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b9300001a00 device_attach: est17 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b9300001a00 device_attach: est18 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b9300001a00 device_attach: est19 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1bbb00001a00 device_attach: est20 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b9300001a00 device_attach: est21 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b9300001a00 device_attach: est22 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1bbb00001a00 device_attach: est23 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b9300001a00 device_attach: est24 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b9300001a00 device_attach: est25 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b9300001a00 device_attach: est26 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b9300001a00 device_attach: est27 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1bbb00001a00 device_attach: est28 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1bbb00001a00 device_attach: est29 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b9300001a00 device_attach: est30 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1bbb00001a00 device_attach: est31 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b9300001a00 device_attach: est32 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1bbb00001a00 device_attach: est33 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b9300001a00 device_attach: est34 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1bbb00001a00 device_attach: est35 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1bbb00001a00 device_attach: est36 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1bbb00001a00 device_attach: est37 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1bbb00001a00 device_attach: est38 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1bbb00001a00 device_attach: est39 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1bbb00001a00 device_attach: est40 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b9300001a00 device_attach: est41 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b9300001a00 device_attach: est42 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b9300001a00 device_attach: est43 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1bbb00001a00 device_attach: est44 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1bbb00001a00 device_attach: est45 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1b9300001a00 device_attach: est46 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 1bbb00001a00 device_attach: est47 attach returned 6 Timecounters tick every 1.000 msec arc4random: no preloaded entropy cache ugen0.1: <0x8086 XHCI root HUB> at usbus0 ugen1.1: <Intel EHCI root HUB> at usbus1 mfid0 numa-domain 0 on mfi0 ugen2.1: <Intel EHCI root HUB> at usbus2 mfid0: 227928MB (466796544 sectors) RAID volume 'raid0' is optimal uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 GEOM: mfid0: corrupt or invalid GPT detected. GEOM: mfid0: GPT rejected -- may not be recoverable. uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ses1 at ahciem1 bus 0 scbus11 target 0 lun 0 ses1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses1: SEMB SES Device random: unblocking device. arc4random: no preloaded entropy cache Trying to mount root from cd9660:/dev/iso9660/12_0_RELEASE_AMD64_DVD [ro]... Root mount waiting for: usbus2 usbus1 usbus0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 21 ports with 21 removable, self powered ugen1.2: <vendor 0x8087 product 0x800a> at usbus1 uhub3 numa-domain 0 on uhub0 uhub3: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1 ugen2.2: <vendor 0x8087 product 0x8002> at usbus2 uhub4 numa-domain 0 on uhub1 uhub4: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus2 Root mount waiting for: usbus2 usbus1 uhub3: 6 ports with 6 removable, self powered uhub4: 8 ports with 8 removable, self powered ugen2.3: <vendor 0x12d1 Keyboard/Mouse KVM 1.1.0> at usbus2 ukbd0 numa-domain 0 on uhub4 ukbd0: <vendor 0x12d1 Keyboard/Mouse KVM 1.1.0, class 0/0, rev 1.10/1.00, addr 3> on usbus2 kbd2 at ukbd0 Root mount waiting for: usbus2 Root mount waiting for: usbus2 ugen2.4: <vendor 0x12d1 DVD-ROM VM 1.1.0> at usbus2 umass0 numa-domain 0 on uhub4 umass0: <vendor 0x12d1 DVD-ROM VM 1.1.0, class 0/0, rev 2.00/1.00, addr 4> on usbus2 umass0: 8070i (ATAPI) over Bulk-Only; quirks = 0x0100 umass0:12:0: Attached to scbus12 mountroot: waiting for device /dev/iso9660/12_0_RELEASE_AMD64_DVD... cd0 at umass-sim0 bus 0 scbus12 target 0 lun 0 cd0: <Virtual DVD-ROM VM 1.1.0 225> Removable CD-ROM SCSI device cd0: 40.000MB/s transfers cd0: 3704MB (1896815 2048 byte sectors) cd0: quirks=0x10<10_BYTE_ONLY> arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache lo0: link state changed to UP ums0 numa-domain 0 on uhub4 ums0: <vendor 0x12d1 Keyboard/Mouse KVM 1.1.0, class 0/0, rev 1.10/1
Hi, During the installation I find that the serial print: Please choose the appropriate terminal type for your system. Common console types are: ansi vt100 xterm cons25w Console type[vt100]: Why my console not show these,only the serial shows these? I try to connet the server with LED,but it failed.
^Triage: I'm sorry that this PR did not get addressed in a timely fashion. By now, the version that it was created against is long out of support. Please re-open if it is still a problem on a supported version.