I have the TP-Link WN-822N v5 but I am unable to connect to WPA networks and authentication doesn't seem to work; I get; Created wlan(4) interfaces: wlan0. wpa_supplicant already running? (pid=2980). Starting dhclient. Cannot open or create pidfile: No such file or directory wlan0: no link .............. giving up /etc/rc.d/dhclient: WARNING: failed to start dhclient My device isn't listed under rtwn_usb. The device is detected: dmesg: rtwn0 on uhub0 rtwn0: <802.11n NIC > on usbus0 rtwn0: MAC/BB RTL8192EU, RF 6052 2T2R
further info ifconfig; wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 50:3e:aa:5d:6f:71 groups: wlan ssid "" channel 11 (2462 MHz 11g ht/20) regdomain FCC country US authmode WPA1+WPA2/802.11i privacy ON deftxkey UNDEF txpower 30 bmiss 7 scanvalid 60 protmode CTS ht20 ampdulimit 8k ampdudensity 16 shortgi -stbc -ldpc wme roaming MANUAL media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> script wpa-dbg.txt wpa_supplicant -i wlan0 -d -c /etc/wpa_supplicant.conf; root@NomadBSD:/home/nomad # wpa_suppkl [K [Klicant -i wlan0 -d -c /etc/wpa_supplki [K [Kicant.co nf wpa_supplicant v2.6 Successfully initialized wpa_supplicant Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf' Reading configuration file '/etc/wpa_supplicant.conf' wpa_driver_bsd_capa: drivercaps=0x0591c541,cryptocaps=0x0000000b Add interface wlan0 to a new radio N/A wlan0: Own MAC address: 50:3e:aa:5d:6f:71 bsd_set_key: alg=0 addr=0x0 key_idx=0 set_tx=0 seq_len=0 key_len=0 bsd_del_key: key_idx=0 bsd_set_key: alg=0 addr=0x0 key_idx=1 set_tx=0 seq_len=0 key_len=0 bsd_del_key: key_idx=1 bsd_set_key: alg=0 addr=0x0 key_idx=2 set_tx=0 seq_len=0 key_len=0 bsd_del_key: key_idx=2 bsd_set_key: alg=0 addr=0x0 key_idx=3 set_tx=0 seq_len=0 key_len=0 bsd_del_key: key_idx=3 wpa_driver_bsd_set_countermeasures: enabled=0 wlan0: RSN: flushing PMKID list in the driver wlan0: State: DISCONNECTED -> INACTIVE wlan0: WPS: UUID based on MAC address: d17a653f-a2cf-570c-a935-79bc2c577dc2 ENGINE: Loading dynamic engine ENGINE: Loading dynamic engine EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: Supplicant port status: Unauthorized EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED wlan0: Added interface wlan0 wlan0: State: INACTIVE -> DISCONNECTED EAPOL: disable timer tick ^Cwlan0: Removing interface wlan0 wlan0: Request to deauthenticate - bssid=00:00:00:00:00:00 pending_bssid=00:00:00:00:00:00 reason=3 state=DISCONNECTED wlan0: State: DISCONNECTED -> DISCONNECTED EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 wpa_driver_bsd_set_countermeasures: enabled=0 wlan0: WPA: Clear old PMK and PTK wlan0: Cancelling scan request wlan0: Cancelling authentication timeout HS20: Delete all stored icons Remove interface wlan0 from radio Remove radio wpa_driver_bsd_set_wpa: enabled=0 wpa_driver_bsd_set_wpa_internal: wpa=0 privacy=0 bsd_set_opt_ie: set WPA+RSN ie (len 0) wpa_driver_bsd_set_wpa_internal: wpa=0 privacy=0 bsd_set_opt_ie: set WPA+RSN ie (len 0) wlan0: CTRL-EVENT-TERMINATING