I'm on CURRENT rev. f0c97033018b. I'm trying to run py-speedtest-cli on Traverse Ten64 router. Each time I do it, I receive a KP: Fatal data abort: x0: 0x0000000000000001 x1: 0xffffa00007092c00 x2: 0x0000000000000008 x3: 0x0000000087811000 x4: 0x0000000000000000 x5: 0xffffa081514a0a80 x6: 0x0000000000000200 x7: 0xffffa0003133e700 x8: 0xdeadc0dedeadc0de x9: 0xffff000000c64678 (pic_post_ithread_desc + 0x0) x10: 0x00000000d4aa2c0d x11: 0x0000000000000093 x12: 0x0000000000000001 x13: 0x0000000000000000 x14: 0x0000000000010000 x15: 0x0000000000000001 x16: 0x0000000000010000 x17: 0x000000000000000a x18: 0xffff00010f45b690 x19: 0xffffa000386e2600 x20: 0xdeadc0dedeadc07e x21: 0xffffa00002320d00 x22: 0x0000000000000001 x23: 0xffff00010f45b7c0 x24: 0xffffa0000250e600 x25: 0xffffa000031b2b00 x26: 0xffff000000cc3b18 (Giant + 0x18) x27: 0xffff00000096f9f4 (digits + 0x22d31) x28: 0xffffa000031b2b10 x29: 0xffff00010f45b690 sp: 0xffff00010f45b690 lr: 0xffff0000004383cc (m_free + 0x138) elr: 0xffff0000007c5ccc (intr_isrc_post_ithread + 0x14) spsr: 0x0000000060000045 far: 0x0000000000000001 esr: 0x0000000096000004 panic: vm_fault failed: 0xffff0000007c5ccc error 1 cpuid = 3 time = 200 KDB: stack backtrace: db_trace_self() at db_trace_self db_trace_self_wrapper() at db_trace_self_wrapper+0x30 vpanic() at vpanic+0x13c panic() at panic+0x44 data_abort() at data_abort+0x358 handle_el1h_sync() at handle_el1h_sync+0x14 --- exception, esr 0x96000004 intr_isrc_post_ithread() at intr_isrc_post_ithread+0x14 m_free() at m_free+0x134 m_free() at m_free+0x134 m_freem() at m_freem+0x24 dpaa2_ni_tx_conf() at dpaa2_ni_tx_conf+0xb8 dpaa2_ni_poll() at dpaa2_ni_poll+0xe4 dpaa2_io_intr() at dpaa2_io_intr+0x13c ithread_loop() at ithread_loop+0x2a0 fork_exit() at fork_exit+0x74 fork_trampoline() at fork_trampoline+0x14