I have a new X670E Steel Legend motherboard and it's been working fine with SSDs for a couple months now but I never looked closely at dmesg until we tried to get the backups set up a few days ago. SATA drives won't show in /dev but show up fine in BIOS. Here is a forum thread where others have posted info, some of which I will reproduce here. https://forums.freebsd.org/threads/sata-drives-show-in-bios-but-wont-show-in-dev.89656/#post-616205 Dmesg output: ... acpi0: <ALASKA A M I > Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.GPP0._PRW], AE_ALREADY_EXISTS (20201113/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20201113/psobject-372) ... pcib2: <ACPI PCI-PCI bridge> at device 2.1 on pci0 pcib2: failed to allocate initial memory window: 0xfbe00000-0xfc8fffff ... ahci1: <AHCI SATA controller> at device 0.0 on pci18 ahci1: 0x400 bytes of rid 0x24 res 3 failed (0, 0xffffffffffffffff). full dmesg is at forum link above. pciconf -lv output: none3@pci0:18:0:0: class=0x010601 rev=0x01 hdr=0x00 vendor=0x1022 device=0x43f6 subvendor=0x1b21 subdevice=0x1062 vendor = 'Advanced Micro Devices, Inc. [AMD]' class = mass storage subclass = SATA ... ahci0@pci0:20:0:0: class=0x010601 rev=0x01 hdr=0x00 vendor=0x1022 device=0x43f6 subvendor=0x1b21 subdevice=0x1062 vendor = 'Advanced Micro Devices, Inc. [AMD]' class = mass storage subclass = SATA full output at forum link above pciconf -lb pci0:18:0:0 output: none0@pci0:18:0:0: class=0x010601 rev=0x01 hdr=0x00 vendor=0x1022 device=0x43f6 subvendor=0x1b21 subdevice=0x1062 bar [24] = type Memory, range 32, base rxfbe80000, size 1024, enabled pciconf -lb pci0:20:0:0 output: ahci0@pci0:20:0:0: class=0x010601 rev=0x01 hdr=0x00 vendor=0x1022 device=0x43f6 subvendor=0x1b21 subdevice=0x1062 bar [24] = type Memory, range 32, base rxfc580000, size 1024, enabled I have updated bios from 1.11 (shipped) to 1.24 (latest non-beta available) and the issue persists. A kind gentleman in the forum posted this explanation: The current (as in git head) ahci driver source code shows AMD devices up to 0x43b6, but doesn't cover 0x43f6 and shouldn't be attaching to it. Another gentleman chimed in with: Not really correct. It does not show up in the table of "known devices", but it's not required given the code in ahci_probe(): Code: /* Is this a possible AHCI candidate? */ if (pci_get_class(dev) == PCIC_STORAGE && pci_get_subclass(dev) == PCIS_STORAGE_SATA && pci_get_progif(dev) == PCIP_STORAGE_SATA_AHCI_1_0) valid = 1; else if (pci_get_class(dev) == PCIC_STORAGE && pci_get_subclass(dev) == PCIS_STORAGE_RAID) valid = 2; ...and a third gentleman said to file a bug report. I will try to be responsive to all requests. If you need physical access to the machine contact me and we will do what we can.
ahci1: <AHCI SATA controller> at device 0.0 on pci18 ahci1: 0x400 bytes of rid 0x24 res 3 failed (0, 0xffffffffffffffff) device_attach: ahci1 attach returned 6 ahci throws the same error messages in: Bug254651 Bug269936
I can't replicate this on a fresh version of -CURRENT so I'd suggest that you try to replicate the issue there too. There's no need to install anything, you can boot into "LiveCD" directly from the USB stick. http://ftp.freebsd.org/pub/FreeBSD/snapshots/ISO-IMAGES/14.0/FreeBSD-14.0-CURRENT-amd64-20230713-510fd8313800-264135-memstick.img.xz Hardware: Asus ProArt X670E-CREATOR WIFI Sandisk Ultra 3D SSD (same as WD Blue 3D SSD)
Created attachment 243436 [details] verbose boot of steel legend motherboard with 14.0 current Requested verbose boot of 14.0 current (download was supplied)
I tried to clip out the relevant parts but I am ill equipped to determine what is important. There are many suspicious lines. Failed to, firmware error, ACPI error, alloc failed, not started. My apologies. See attachment for the full verbose file.
This seems to be limited to ASRock boards to far, my ASUS board works fine OOTB on 14-CURRENT.
Alexander, any ideas of what might be causing this?
It is not an AHCI problem. There is some problem with PCI resources allocation. You can see plenty of "failed to allocate" messages in dmesg output. Somehow what BIOS done didn't satisfy the kernel, it tries to solve the puzzle, but fails particularly in case of AHCI controller, but may be not only. If BIOS update does not help, try to play with its settings, like disabling fast boot, plug and play OS, or whatever can trigger BIOS to do full resource allocation properly by itself.
i will go this tonight and report back.
Items with arrows were messed with. (original setting) -> (what i tried) BIOS settings: Boot menu: CSM enabled -> disabled Launch PXE OpROM Policy UEFI -> Do not launch Launch Storage OpROM Policy UEFI -> Do not launch Full Screen Logo Enabled -> disabled fast boot disabled Security Menu: Supervisor Password Not installed user password Not Installed HDD Security Configuration: P0:ST8000NE0004-1ZF11G <- SATA drive that won't show in FreeBSD P1:ST12000NM000J-2TY103 <- SATA drive that won't show in FreeBSD Advanced\Storage Configuration Menu: SATA Mode AHCI SATA Port 1 Hot Plug Enabled -> disabled SATA Port 2 Hot Plug Enabled -> disabled SATA Port 3 Hot Plug Enabled -> disabled SATA Port 4 Hot Plug Enabled -> disabled SATA port1 ST8000NE0004-1 (8001.5GB) SATA Port2 ST12000NM000J- (12000.1GB) OC Tweaker Menu: (I had not touched this menu previously) (there are two pages of stuff here, all marked 'Auto'. i left it alone.) Advanced\Trusted Computing Menu:(I had not touched this menu previously) Security Device Support (TPM2.0): Enable SHA256 PCR Bank Enabled SHA384 PCR Bank Disabled Pending Operation None Platform Hierarchy Enabled Storage Hierarchy Enabled -> Disabled Endorsement Hierarchy Endabled Physical Presence Spec Version 1.3 Device select auto I also tried: RGB LED On/Off on -> off Above 4G Decoding enabled -> disabled Re-Size Bar support enabled -> disabled So the above was about a dozen reboots. Last thing I did was reset all settings to default. Each time I rebooted i checked for drives in /dev. no 'da' devices showed but i also looked for anything unusual. I also did an 'ls /dev/diskid' to see if anything showed there. Then I did a gpart show and gpart list. No joy there either. Note that the bios has no problem listing the drives on two screens so it seems there is something going right at that point. first issue in dmesg still seems to be: Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.GPP0._PRW], AE_ALREADY_EXISTS (20201113/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20201113/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.GPP2._PRW], AE_ALREADY_EXISTS (20201113/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20201113/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_GPE._L08], AE_ALREADY_EXISTS (20201113/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20201113/psobject-372) Also, SATA issues remain: root(33)au:~ # cat /var/log/dmesg.today | grep -A 2 SATA ahci0: <AHCI SATA controller> at device 0.0 on pci18 ahci0: 0x400 bytes of rid 0x24 res 3 failed (0, 0xffffffffffffffff). device_attach: ahci0 attach returned 6 -- ahci0: <AHCI SATA controller> mem 0xfc580000-0xfc5803ff at device 0.0 on pci20 ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 -- ahci1: <AHCI SATA controller> at device 0.0 on pci18 ahci1: 0x400 bytes of rid 0x24 res 3 failed (0, 0xffffffffffffffff). device_attach: ahci1 attach returned 6 -- ahci1: <AHCI SATA controller> at device 0.0 on pci18 ahci1: 0x400 bytes of rid 0x24 res 3 failed (0, 0xffffffffffffffff). device_attach: ahci1 attach returned 6 Please don't hesitate to let me know if there is something else I can do.
> plug and play OS Must be turned off 1st.
Thank you for your suggestion. I just did a reboot with: verbose fast boot disabled SATA Port 1 Hot Plug enabled SATA Port 2,3,4 Hot Plug disabled (SATA ports r1 and 2 have disk drives attached) display priority external -> internal full screen logo disabled result was no joy. My research from Alexander Motin's post suggesting Plug and Play OS be turned off led me to believe this is sometimes listed as PnP/PCI Configuration. I found no reference to PnP or Plug and Play in the bios. Just now I did a thorough search of every screen and option and found no reference. I then searched the ASRock manual, website and then the internet for alternate names and came up with nothing. I welcome all suggestions. But I do have a PCI Configuration screen. That screen only has three options. Disabling "Above 4G Decoding" removes the menu items for "Re-Size Bar support" and "Above 4GB MMIO Limit". I had tried this already as reported on this page but adding it to the above changes gave me the same top thirty lines of dmesg and no additional hard drives. ls /dev/ acpi ctty hpet0 log mixer6 nvme0ns1 sequencer0 ttyv3 ugen0.1 uhid0 wmistat0 apm devctl input mdctl mlx5ctl nvme1 sndstat ttyv4 ugen1.1 uhid1 xpt0 apmctl devctl2 io mem music0 nvme1ns1 stderr ttyv5 ugen1.2 uhid2 zero audit devstat iov midistat netdump nvme2 stdin ttyv6 ugen1.3 uinput zfs auditpipe diskid kbd0 mixer0 netmap nvme2ns1 stdout ttyv7 ugen1.4 ukbd0 bpf efi kbd1 mixer1 null pci sysmouse ttyv8 ugen1.5 ukbd1 bpf0 fd kbd2 mixer2 nvd0 pfil tcp_log ttyv9 ugen2.1 ums0 console fido kbdmux0 mixer3 nvd1 pts ttyv0 ttyva ugen3.1 urandom consolectl full klog mixer4 nvd2 random ttyv1 ttyvb ugen4.1 usb crypto geom.ctl kmem mixer5 nvme0 reroot ttyv2 ufssuspend ugen4.2 usbctl dmesg, both trys: root(33)au:~ # dmesg tcp_log: tcp_log device crypto: <crypto core> kbd0 at kbdmux0 io: <I/O> mem: <memory> null: <full device, null device, zero device> [ath_hal] loaded efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: <System Management BIOS> at iomem 0x794d8000-0x794d801e smbios0: Version: 3.4, BCD Revision: 3.4 crypto: assign cryptosoft0 driver id 0, flags 0x6000000 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> crypto: assign aesni0 driver id 1, flags 0xe000000 acpi0: <ALASKA A M I > Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.GPP0._PRW], AE_ALREADY_EXISTS (20201113/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20201113/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.GPP2._PRW], AE_ALREADY_EXISTS (20201113/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20201113/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_GPE._L08], AE_ALREADY_EXISTS (20201113/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20201113/psobject-372) ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0014) ACPI: 15 ACPI AML tables successfully acquired and loaded PCIe: Memory Mapped configuration base @ 0xf0000000
dmesg | grep -E "SATA|pci18|pcib18|failed|unable" pcib2: failed to allocate initial memory window: 0xfbe00000-0xfc8fffff pcib2: failed to allocate initial memory window (0xfbe00000-0xfc8fffff,0xb00000) pcib3: failed to allocate initial memory window: 0xfbe00000-0xfc8fffff pcib9: failed to allocate initial memory window: 0xfbe00000-0xfc2fffff pcib9: failed to allocate initial memory window (0xfbe00000-0xfc2fffff,0x500000) pcib10: failed to allocate initial memory window: 0xfbe00000-0xfc2fffff pcib18: <ACPI PCI-PCI bridge> at device 13.0 on pci10 pcib18: failed to allocate initial memory window: 0xfbe00000-0xfbffffff pcib18: domain 0 pcib18: secondary bus 18 pcib18: subordinate bus 18 pcib18: could not get PCI interrupt routing table for \134_SB_.PCI0.GPP7.UP00.DP40.UP00.DP68 - AE_NOT_FOUND pci18: <ACPI PCI bus> on pcib18 pcib18: allocated bus range (18-18) for rid 0 of pci18 pci18: domain=0, physical bus=18 pcib18: failed to allocate initial memory window (0xfbe80000-0xfbe803ff,0x400) pcib18: failed to allocate initial memory window (0-0xffffffff,0x400) pci18: pci0:18:0:0 bar 0x24 failed to allocate ahci0: <AHCI SATA controller> at device 0.0 on pci18 pcib18: failed to allocate initial memory window (0-0xffffffff,0x400) ahci0: 0x400 bytes of rid 0x24 res 3 failed (0, 0xffffffffffffffff). ahci0: <AHCI SATA controller> mem 0xfc580000-0xfc5803ff at device 0.0 on pci20 ahci0: Caps: 64bit NCQ SNTF SS ALP AL CLO 6Gbps PM PMD SSC PSC 32cmd eSATA 6ports ahc_isa_identify 0: ioport 0xc00 alloc failed ahc_isa_identify 1: ioport 0x1c00 alloc failed ahc_isa_identify 2: ioport 0x2c00 alloc failed ahc_isa_identify 3: ioport 0x3c00 alloc failed ahc_isa_identify 4: ioport 0x4c00 alloc failed ahc_isa_identify 5: ioport 0x5c00 alloc failed ahc_isa_identify 6: ioport 0x6c00 alloc failed ahc_isa_identify 7: ioport 0x7c00 alloc failed ahc_isa_identify 8: ioport 0x8c00 alloc failed ahc_isa_identify 9: ioport 0x9c00 alloc failed ahc_isa_identify 10: ioport 0xac00 alloc failed ahc_isa_identify 11: ioport 0xbc00 alloc failed ahc_isa_identify 12: ioport 0xcc00 alloc failed ahc_isa_identify 13: ioport 0xdc00 alloc failed ahc_isa_identify 14: ioport 0xec00 alloc failed sc0 failed to probe on isa0 vga0 failed to probe on isa0 atkbdc0 failed to probe at port 0x60,0x64 on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0 failed to probe at irq 7 on isa0 uart0 failed to probe at port 0x3f8 irq 4 on isa0 uart1 failed to probe at port 0x2f8 irq 3 on isa0 ahcich0: SATA connect timeout time=10000us status=00000000 ahcich1: SATA connect timeout time=10000us status=00000000 ahcich2: SATA connect timeout time=10000us status=00000000 ahcich3: SATA connect timeout time=10000us status=00000000 pci18: driver added ahci1: <AHCI SATA controller> at device 0.0 on pci18 pcib18: failed to allocate initial memory window (0-0xffffffff,0x400) ahci1: 0x400 bytes of rid 0x24 res 3 failed (0, 0xffffffffffffffff). pci18: driver added ahci1: <AHCI SATA controller> at device 0.0 on pci18 pcib18: failed to allocate initial memory window (0-0xffffffff,0x400) ahci1: 0x400 bytes of rid 0x24 res 3 failed (0, 0xffffffffffffffff). ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3, OCF=0x3. Timeout
I am open to more complicated requests. If there is diagnostic software, I can run it. if someone could suggest some code to run that would narrow down the possibilities of what is wrong, I can do that too.
Quick recap. Last request was for me to turn Plug and Play OS off. No such setting in BIOS. Best guess was PCI Configuration\Above 4G Decoding. I disabled that many times, no joy. If I were to attempt to compile the kernel would that help? Any other suggestions welcome.
Created attachment 244596 [details] New Verbose boot with hw.pci.enable_io_modes=0 New Verbose boot with hw.pci.enable_io_modes=0
Created attachment 244598 [details] Moved SATA drives to #3,#4 SATA ports from #1,#2, verbose dmesg
Seeing similar issues on my board after BIOS 1710 which (might not be related) bumped AGESA to "Combo AM5 PI 1.0.8.0"
Justin, what BIOS version are you on and have you tried updating it? I would recommend doing it in series to increase the possibility finding on version that works.
(In reply to Daniel Engberg from comment #18) I have updated bios from 1.11 (shipped) to 1.24 (latest non-beta available at the time) and the issue persists. There is now a 1.28 for "Update AGESA to ComboAM5". Is it possible that the AGESA referenced BIOS will fix a FreeBSD SATA issue that is not an issue for Linux or Windows? It does not seem possible to me but if someone needs me to try it, let me know.
As I mentioned in https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=272507#c17 I started seeing it after a BIOS update and I'm quite sure it's related but Windows and Linux might do something FreeBSD doesn't.
I will try 1.28 this weekend but I am concerned that they already have a 1.29 and a 1.30 and there's only been two months and a week between the three.
I was unable to try the new bios last weekend. I will try again shortly.
Created attachment 245842 [details] Boot verbose log for Asus TUF x670e-plus missing SATA drives
I'm also having this problem after upgrading to an Asus TUF x670e-plus MB which I dual boot Windows and FreeBSD from NVMe. Windows sees the SATA optical drives fine, FreeBSD doesn't. Currently on BIOS 1809 with fairly stock settings.
I just posted the dmesg for ASROCK Steel Legend X670E with BIOS 1.28 to: https://dmesgd.nycbug.org/index.cgi?do=view&id=7374 $ dmidecode ... BIOS Information Vendor: American Megatrends International, LLC. Version: 1.28 ... no SATA drives in /dev or listed in $ gpart show
ASUS ProArt creator wifi - same issue after updating BIOS to any version above 1602. Rolled it back to 1602 for now.
I had an issue with my Asus Crosshair x670 Extreme where I originally couldn't boot FreeBSD from the SATA disk where it was installed... Unless I went into the BIOS and selected the drive via "boot override". Eventually, I was able to fix the issue by disabling fast boot. Otherwise... FreeBSD worked perfectly on this board until BIOS 1709. Unfortunately, you can't downgrade from 1709... But as of 1709, USB and ethernet stopped working entirely... Some new BIOS betas since then have gotten USB working again, but not the onboard i225 ethernet. I've worked around this by installing an Intel x550-T2 NIC... But the system is unstable, and seems slower... The slowness might be related to disk IO? I'm not sure. The SATA Samsung 860 Pro I'm using is reported as 96% by Samsung Magician. Interestingly, downgrading back to 1709, USB still works... I suspect that downgrading to the older BIOS version doesn't downgrade some of the other firmware. My guess is that while the BIOS is downgraded to 1709, that the AGESA is still more recent than what shipped with 1709. I ended downgrading to 1709 because it's less unstable in Windows/Linux and found it now hilariously works with FreeBSD now too. But It's still a bit unstable and I still have this weird slowness in FreeBSD. So while I don't have quite the same bug, this might be useful as I do think this is related. Probably today, I'll finally file a separate bug.
ASUS has been released 1904 recently - same behavior (SATA drives are not detected). Is there any way to find out what's wrong?
The boot verbose logs are helpful, can someone with an affected machine provide the output of 'devinfo -u' and 'devinfo -rv'? There is a resource conflict that prevents some PCI devices (including the AHCI controller) from allocating their firmware-assigned resources and I need to see the source of the conflict which I can't see in the verbose logs.
John Baldwin: On the off chance that you get this fixed, is there a bug bounty website where I can contract you and people like you directly to do stuff like this? the info you asked for: root(33)au:~ # devinfo -u Interrupt request lines: 0x0 (attimer0) 0x1 (root0) 0x3-0x7 (root0) 0x8 (atrtc0) 0x9 (acpi0) 0xa-0x37 (root0) 0x38 (hpet0) 0x39 (hpet0) 0x3a (hpet0) 0x3b (ix0) 0x3c (ix0) 0x3d (ix0) 0x3e (ix0) 0x3f (ix0) 0x40 (ix0) 0x41 (ix0) 0x42 (ix0) 0x43 (ix0) 0x44 (ix0) 0x45 (ix0) 0x46 (ix0) 0x47 (ix0) 0x48 (ix0) 0x49 (ix0) 0x4a (ix0) 0x4b (ix0) 0x4c (ix1) 0x4d (ix1) 0x4e (ix1) 0x4f (ix1) 0x50 (ix1) 0x51 (ix1) 0x52 (ix1) 0x53 (ix1) 0x54 (ix1) 0x55 (ix1) 0x56 (ix1) 0x57 (ix1) 0x58 (ix1) 0x59 (ix1) 0x5a (ix1) 0x5b (ix1) 0x5c (ix1) 0x5d (re0) 0x5e (nvme0) 0x5f (nvme0) 0x60 (nvme0) 0x61 (nvme0) 0x62 (nvme0) 0x63 (nvme0) 0x64 (nvme0) 0x65 (nvme0) 0x66 (nvme0) 0x67 (nvme1) 0x68 (nvme1) 0x69 (nvme1) 0x6a (nvme1) 0x6b (nvme1) 0x6c (nvme1) 0x6d (nvme1) 0x6e (nvme1) 0x6f (nvme1) 0x70 (xhci0) 0x71 (xhci1) 0x72 (nvme2) 0x73 (nvme2) 0x74 (nvme2) 0x75 (nvme2) 0x76 (nvme2) 0x77 (nvme2) 0x78 (nvme2) 0x79 (nvme2) 0x7a (nvme2) 0x7b (hdac0) 0x7c (xhci2) 0x7d (xhci3) 0x7e (hdac1) 0x7f (xhci4) DMA request lines: 0-3 (root0) 4 (atdma0) 5-7 (root0) I/O ports: 0x0-0xf (atdma0) 0x10-0x1f (acpi0) 0x20-0x21 ---- 0x22-0x3f (acpi0) 0x40-0x43 (attimer0) 0x44-0x60 (root0) 0x61 ---- 0x62 (root0) 0x63 (acpi0) 0x64 (root0) 0x65 (acpi0) 0x66 (root0) 0x67-0x6f (acpi0) 0x70-0x71 (atrtc0) 0x72-0x7f (acpi0) 0x80 (acpi0) 0x81-0x83 (atdma0) 0x84-0x86 (acpi0) 0x87 (atdma0) 0x88 (acpi0) 0x89-0x8b (atdma0) 0x8c-0x8e (acpi0) 0x8f (atdma0) 0x90-0x9f (acpi0) 0xa0-0xa1 ---- 0xa2-0xbf (acpi0) 0xc0-0xdf (atdma0) 0xe0-0xef (acpi0) 0xf0-0x40a (root0) 0x40b (acpi0) 0x40c-0x413 (root0) 0x414 (cpu31) 0x414 (cpu30) 0x414 (cpu29) 0x414 (cpu28) 0x414 (cpu27) 0x414 (cpu26) 0x414 (cpu25) 0x414 (cpu24) 0x414 (cpu23) 0x414 (cpu22) 0x414 (cpu21) 0x414 (cpu20) 0x414 (cpu19) 0x414 (cpu18) 0x414 (cpu17) 0x414 (cpu16) 0x414 (cpu15) 0x414 (cpu14) 0x414 (cpu13) 0x414 (cpu12) 0x414 (cpu11) 0x414 (cpu10) 0x414 (cpu9) 0x414 (cpu8) 0x414 (cpu7) 0x414 (cpu6) 0x414 (cpu5) 0x414 (cpu4) 0x414 (cpu3) 0x414 (cpu2) 0x414 (cpu1) 0x414 (cpu0) 0x415 (cpu31) 0x415 (cpu30) 0x415 (cpu29) 0x415 (cpu28) 0x415 (cpu27) 0x415 (cpu26) 0x415 (cpu25) 0x415 (cpu24) 0x415 (cpu23) 0x415 (cpu22) 0x415 (cpu21) 0x415 (cpu20) 0x415 (cpu19) 0x415 (cpu18) 0x415 (cpu17) 0x415 (cpu16) 0x415 (cpu15) 0x415 (cpu14) 0x415 (cpu13) 0x415 (cpu12) 0x415 (cpu11) 0x415 (cpu10) 0x415 (cpu9) 0x415 (cpu8) 0x415 (cpu7) 0x415 (cpu6) 0x415 (cpu5) 0x415 (cpu4) 0x415 (cpu3) 0x415 (cpu2) 0x415 (cpu1) 0x415 (cpu0) 0x416-0x4cf (root0) 0x4d0-0x4d1 (acpi0) 0x4d2-0x4d5 (root0) 0x4d6 (acpi0) 0x4d7-0x7ff (root0) 0x800-0x89f (acpi0) 0x8a0-0x8ff (root0) 0x900-0x90f (acpi0) 0x910-0x91f (acpi0) 0x920-0x9ff (root0) 0xa00-0xa0f (acpi0) 0xa10-0xa1f (acpi0) 0xa20-0xa2f (acpi0) 0xa30-0xaff (root0) 0xb00-0xb0f (acpi0) 0xb10-0xb1f (root0) 0xb20-0xb3f (acpi0) 0xb40-0xbff (root0) 0xc00-0xc01 (acpi0) 0xc02-0xc13 (root0) 0xc14 (acpi0) 0xc15-0xc4f (root0) 0xc50-0xc51 (acpi0) 0xc52 (acpi0) 0xc53-0xc6b (root0) 0xc6c (acpi0) 0xc6d-0xc6e (root0) 0xc6f (acpi0) 0xc70-0xcd7 (root0) 0xcd8-0xcdf (acpi0) 0xce0-0xcf7 (root0) 0xcf8-0xcff (pcib0) 0xd00-0xcfff (root0) 0xd000-0xefff (pcib2) 0xf000-0xffff (pcib22) I/O memory addresses: 0x0-0x9ffff (ram0) 0xa0000-0xfffff (root0) 0x100000-0x9afefff (ram0) 0x9aff000-0x9ffffff (root0) 0xa000000-0xa1fffff (ram0) 0xa200000-0xa20ffff (root0) 0xa210000-0xaffffff (ram0) 0xb000000-0xb020fff (root0) 0xb021000-0x6d47efff (ram0) 0x6d47f000-0x73453fff (root0) 0x73454000-0x73457fff ---- 0x73458000-0x7345bfff ---- 0x7345c000-0x792d7fff (root0) 0x792d8000-0x792d801e (smbios0) 0x792d801f-0x795fefff (root0) 0x795ff000-0x7bffafff (ram0) 0x7bffb000-0x7fffffff (root0) 0x80000000-0x801fffff (pcib1) 0x80200000-0xefffffff (root0) 0xf0000000-0xf7ffffff (acpi0) 0xf8000000-0xfb7fffff (root0) 0xfb800000-0xfbcfffff (pcib1) 0xfbd00000-0xfbefffff (root0) 0xfbf00000-0xfbf00fff ---- 0xfbf01000-0xfbffffff (root0) 0xfc000000-0xfc8fffff (pcib2) 0xfc900000-0xfccfffff (pcib22) 0xfcd00000-0xfcdfffff (pcib23) 0xfce00000-0xfcefffff (pcib21) 0xfcf00000-0xfd1fffff (root0) 0xfd200000-0xfd2fffff (acpi0) 0xfd300000-0xfd5fffff (root0) 0xfd600000-0xfd67ffff (acpi0) 0xfd680000-0xfebfffff (root0) 0xfec00000-0xfec00fff (acpi0) 0xfec01000-0xfec01fff (acpi0) 0xfec02000-0xfec0ffff (root0) 0xfec10000-0xfec10fff (acpi0) 0xfec11000-0xfec2ffff (root0) 0xfec30000-0xfec30fff ---- 0xfec31000-0xfecfffff (root0) 0xfed00000-0xfed003ff (hpet0) 0xfed00400-0xfed7ffff (root0) 0xfed80000-0xfed8ffff (acpi0) 0xfed90000-0xfedbffff (root0) 0xfedc0000-0xfedc0fff (acpi0) 0xfedc1000-0xfedfffff (root0) 0xfee00000-0xfee00fff (acpi0) 0xfee01000-0xfeffffff (root0) 0xff000000-0xffffffff (acpi0) 0x100000000-0x1057ffffff (ram0) 0x1058000000-0xfcdfffffff (root0) 0xfce0000000-0xfcf01fffff (pcib22) 0xfcf0200000-0xffffffffffff (root0) ACPI I/O ports: 0x10-0x1f (root0) 0x22-0x3f (root0) 0x63 (root0) 0x65 (root0) 0x67-0x6f (root0) 0x72-0x80 (root0) 0x84-0x86 (root0) 0x88 (root0) 0x8c-0x8e (root0) 0x90-0x9f (root0) 0xa2-0xbf (root0) 0xe0-0xef (root0) 0x40b (root0) 0x4d0-0x4d1 (root0) 0x4d6 (root0) 0x800-0x807 (root0) 0x808-0x80b (acpi_timer0) 0x80c-0x89f (root0) 0x900-0x91f (root0) 0xa00-0xa2f (root0) 0xb00-0xb0f (root0) 0xb20-0xb3f (root0) 0xc00-0xc01 (root0) 0xc14 (root0) 0xc50-0xc52 (root0) 0xc6c (root0) 0xc6f (root0) 0xcd8-0xcdf (root0) ACPI I/O memory addresses: 0xf0000000-0xf7ffffff (root0) 0xfd200000-0xfd2fffff (root0) 0xfd600000-0xfd67ffff (root0) 0xfec00000-0xfec01fff (root0) 0xfec10000-0xfec10fff (root0) 0xfed80000-0xfed8ffff (root0) 0xfedc0000-0xfedc0fff (root0) 0xfee00000-0xfee00fff (root0) 0xff000000-0xffffffff (root0) PCI domain 0 bus numbers: 0 (pci0) 1 (pcib1) 2-20 (pcib2) 21 (pcib21) 22 (pcib22) 23 (pcib23) 24-255 (root0) pcib1 bus numbers: 1 (pci1) pcib1 I/O port window: pcib1 memory window: 0xfb800000-0xfb9fffff (ix0) 0xfba00000-0xfba03fff (ix0) 0xfba04000-0xfba07fff (ix1) 0xfba08000-0xfbcfffff (root0) pcib1 prefetch window: 0x80000000-0x801fffff (ix1) pcib2 bus numbers: 2 (pci2) 3-20 (pcib3) pcib2 I/O port window: 0xd000-0xefff (pcib3) pcib2 memory window: 0xfc000000-0xfc8fffff (pcib3) pcib2 prefetch window: pcib3 bus numbers: 3 (pci3) 4 (pcib4) 5 (pcib5) 6 (pcib6) 7 (pcib7) 8 (pcib8) 9-18 (pcib9) 19 (pcib19) 20 (pcib20) pcib3 I/O port window: 0xd000-0xdfff (pcib8) 0xe000-0xefff (pcib5) pcib3 memory window: 0xfc000000-0xfc2fffff (pcib9) 0xfc300000-0xfc4fffff (pcib7) 0xfc500000-0xfc5fffff (pcib20) 0xfc600000-0xfc6fffff (pcib19) 0xfc700000-0xfc7fffff (pcib8) 0xfc800000-0xfc8fffff (pcib5) pcib3 prefetch window: pcib4 bus numbers: 4 (pci4) pcib4 I/O port window: pcib4 memory window: pcib4 prefetch window: pcib5 bus numbers: 5 (pci5) pcib5 I/O port window: 0xe000-0xe0ff (re0) 0xe100-0xefff (root0) pcib5 memory window: 0xfc800000-0xfc803fff (re0) 0xfc804000-0xfc804fff (re0) 0xfc805000-0xfc8fffff (root0) pcib5 prefetch window: pcib6 bus numbers: 6 (pci6) pcib6 I/O port window: pcib6 memory window: pcib6 prefetch window: pcib7 bus numbers: 7 (pci7) pcib7 I/O port window: pcib7 memory window: 0xfc300000-0xfc4fffff (root0) pcib7 prefetch window: pcib8 bus numbers: 8 (pci8) pcib8 I/O port window: 0xd000-0xd0ff ---- 0xd100-0xdfff (root0) pcib8 memory window: 0xfc700000-0xfc70ffff ---- 0xfc710000-0xfc713fff ---- 0xfc714000-0xfc7fffff (root0) pcib8 prefetch window: pcib9 bus numbers: 9 (pci9) 10-18 (pcib10) pcib9 I/O port window: pcib9 memory window: 0xfc000000-0xfc2fffff (pcib10) pcib9 prefetch window: pcib10 bus numbers: 10 (pci10) 11 (pcib11) 12 (pcib12) 13 (pcib13) 14 (pcib14) 15 (pcib15) 16 (pcib16) 17 (pcib17) 18 (pcib18) pcib10 I/O port window: pcib10 memory window: 0xfc000000-0xfc0fffff (pcib17) 0xfc100000-0xfc1fffff (pcib16) 0xfc200000-0xfc2fffff (pcib11) pcib10 prefetch window: pcib11 bus numbers: 11 (pci11) pcib11 I/O port window: pcib11 memory window: 0xfc200000-0xfc203fff (nvme0) 0xfc204000-0xfc2fffff (root0) pcib11 prefetch window: pcib12 bus numbers: 12 (pci12) pcib12 I/O port window: pcib12 memory window: pcib12 prefetch window: pcib13 bus numbers: 13 (pci13) pcib13 I/O port window: pcib13 memory window: pcib13 prefetch window: pcib14 bus numbers: 14 (pci14) pcib14 I/O port window: pcib14 memory window: pcib14 prefetch window: pcib15 bus numbers: 15 (pci15) pcib15 I/O port window: pcib15 memory window: pcib15 prefetch window: pcib16 bus numbers: 16 (pci16) pcib16 I/O port window: pcib16 memory window: 0xfc100000-0xfc103fff (nvme1) 0xfc104000-0xfc1fffff (root0) pcib16 prefetch window: pcib17 bus numbers: 17 (pci17) pcib17 I/O port window: pcib17 memory window: 0xfc000000-0xfc007fff (xhci0) 0xfc008000-0xfc0fffff (root0) pcib17 prefetch window: pcib18 bus numbers: 18 (pci18) pcib18 I/O port window: pcib18 memory window: pcib18 prefetch window: pcib19 bus numbers: 19 (pci19) pcib19 I/O port window: pcib19 memory window: 0xfc600000-0xfc607fff (xhci1) 0xfc608000-0xfc6fffff (root0) pcib19 prefetch window: pcib20 bus numbers: 20 (pci20) pcib20 I/O port window: pcib20 memory window: 0xfc500000-0xfc5003ff ---- 0xfc500400-0xfc5fffff (root0) pcib20 prefetch window: pcib21 bus numbers: 21 (pci21) pcib21 I/O port window: pcib21 memory window: 0xfce00000-0xfce03fff (nvme2) 0xfce04000-0xfcefffff (root0) pcib21 prefetch window: pcib22 bus numbers: 22 (pci22) pcib22 I/O port window: 0xf000-0xffff (root0) pcib22 memory window: 0xfc900000-0xfc9fffff (xhci3) 0xfca00000-0xfcafffff (xhci2) 0xfcb00000-0xfcb03fff (hdac0) 0xfcb04000-0xfcb07fff (root0) 0xfcb08000-0xfcb0ffff (hdac1) 0xfcb10000-0xfcbfffff (root0) 0xfcc00000-0xfcc7ffff (vgapci0) 0xfcc80000-0xfccfffff (root0) pcib22 prefetch window: 0xfce0000000-0xfcefffffff (vgapci0) 0xfcf0000000-0xfcf01fffff (vgapci0) pcib23 bus numbers: 23 (pci23) pcib23 I/O port window: pcib23 memory window: 0xfcd00000-0xfcdfffff (xhci4) pcib23 prefetch window: ######################################################################################################################################################################################################################################################################################################################################################################################################## root(33)au:~ # devinfo -rv nexus0 smbios0 I/O memory addresses: 0x792d8000-0x792d801e efirtc0 cryptosoft0 aesni0 ram0 I/O memory addresses: 0x0-0x9ffff 0x100000-0x9afefff 0xa000000-0xa1fffff 0xa210000-0xaffffff 0xb021000-0x6d47efff 0x795ff000-0x7bffafff 0x100000000-0x1057ffffff apic0 acpi0 Interrupt request lines: 0x9 I/O ports: 0x10-0x1f 0x22-0x3f 0x63 0x65 0x67-0x6f 0x72-0x7f 0x80 0x84-0x86 0x88 0x8c-0x8e 0x90-0x9f 0xa2-0xbf 0xe0-0xef 0x40b 0x4d0-0x4d1 0x4d6 0x800-0x89f 0x900-0x90f 0x910-0x91f 0xa00-0xa0f 0xa10-0xa1f 0xa20-0xa2f 0xb00-0xb0f 0xb20-0xb3f 0xc00-0xc01 0xc14 0xc50-0xc51 0xc52 0xc6c 0xc6f 0xcd8-0xcdf I/O memory addresses: 0xf0000000-0xf7ffffff 0xfd200000-0xfd2fffff 0xfd600000-0xfd67ffff 0xfec00000-0xfec00fff 0xfec01000-0xfec01fff 0xfec10000-0xfec10fff 0xfed80000-0xfed8ffff 0xfedc0000-0xfedc0fff 0xfee00000-0xfee00fff 0xff000000-0xffffffff pcib0 pnpinfo _HID=PNP0A08 _UID=0 _CID=PNP0A03 at handle=\_SB_.PCI0 I/O ports: 0xcf8-0xcff pci0 PCI domain 0 bus numbers: 0 hostb0 pnpinfo vendor=0x1022 device=0x14d8 subvendor=0x1022 subdevice=0x14d8 class=0x060000 at slot=0 function=0 dbsf=pci0:0:0:0 handle=\_SB_.PCI0.GNBD unknown pnpinfo vendor=0x1022 device=0x14d9 subvendor=0x1022 subdevice=0x14d9 class=0x080600 at slot=0 function=2 dbsf=pci0:0:0:2 handle=\_SB_.PCI0.IOMA hostb1 pnpinfo vendor=0x1022 device=0x14da subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=1 function=0 dbsf=pci0:0:1:0 handle=\_SB_.PCI0.D003 pcib1 pnpinfo vendor=0x1022 device=0x14db subvendor=0x1022 subdevice=0x1453 class=0x060400 at slot=1 function=1 dbsf=pci0:0:1:1 handle=\_SB_.PCI0.GPP0 I/O memory addresses: 0x80000000-0x801fffff 0xfb800000-0xfbcfffff PCI domain 0 bus numbers: 1 pci1 pcib1 bus numbers: 1 ix0 pnpinfo vendor=0x8086 device=0x1563 subvendor=0x8086 subdevice=0x0001 class=0x020000 at slot=0 function=0 dbsf=pci0:1:0:0 Interrupt request lines: 0x3b 0x3c 0x3d 0x3e 0x3f 0x40 0x41 0x42 0x43 0x44 0x45 0x46 0x47 0x48 0x49 0x4a 0x4b pcib1 memory window: 0xfb800000-0xfb9fffff 0xfba00000-0xfba03fff ix1 pnpinfo vendor=0x8086 device=0x1563 subvendor=0x8086 subdevice=0x0001 class=0x020000 at slot=0 function=1 dbsf=pci0:1:0:1 Interrupt request lines: 0x4c 0x4d 0x4e 0x4f 0x50 0x51 0x52 0x53 0x54 0x55 0x56 0x57 0x58 0x59 0x5a 0x5b 0x5c pcib1 memory window: 0xfba04000-0xfba07fff pcib1 prefetch window: 0x80000000-0x801fffff hostb2 pnpinfo vendor=0x1022 device=0x14da subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=2 function=0 dbsf=pci0:0:2:0 handle=\_SB_.PCI0.D00F pcib2 pnpinfo vendor=0x1022 device=0x14db subvendor=0x1022 subdevice=0x1453 class=0x060400 at slot=2 function=1 dbsf=pci0:0:2:1 handle=\_SB_.PCI0.GPP7 I/O ports: 0xd000-0xefff I/O memory addresses: 0xfc000000-0xfc8fffff PCI domain 0 bus numbers: 2-20 pci2 pcib2 bus numbers: 2 pcib3 pnpinfo vendor=0x1022 device=0x43f4 subvendor=0x1b21 subdevice=0x3328 class=0x060400 at slot=0 function=0 dbsf=pci0:2:0:0 handle=\_SB_.PCI0.GPP7.UP00 pcib2 bus numbers: 3-20 pcib2 I/O port window: 0xd000-0xefff pcib2 memory window: 0xfc000000-0xfc8fffff pci3 pcib3 bus numbers: 3 pcib4 pnpinfo vendor=0x1022 device=0x43f5 subvendor=0x1b21 subdevice=0x3328 class=0x060400 at slot=0 function=0 dbsf=pci0:3:0:0 handle=\_SB_.PCI0.GPP7.UP00.DP00 pcib3 bus numbers: 4 pci4 pcib4 bus numbers: 4 pcib5 pnpinfo vendor=0x1022 device=0x43f5 subvendor=0x1b21 subdevice=0x3328 class=0x060400 at slot=4 function=0 dbsf=pci0:3:4:0 handle=\_SB_.PCI0.GPP7.UP00.DP20 pcib3 bus numbers: 5 pcib3 I/O port window: 0xe000-0xefff pcib3 memory window: 0xfc800000-0xfc8fffff pci5 pcib5 bus numbers: 5 re0 pnpinfo vendor=0x10ec device=0x8168 subvendor=0x1849 subdevice=0x8168 class=0x020000 at slot=0 function=0 dbsf=pci0:5:0:0 handle=\_SB_.PCI0.GPP7.UP00.DP20.NV00 Interrupt request lines: 0x5d pcib5 I/O port window: 0xe000-0xe0ff pcib5 memory window: 0xfc800000-0xfc803fff 0xfc804000-0xfc804fff miibus0 rgephy0 pnpinfo oui=0xe04c model=0x0 rev=0x0 at phyno=1 pcib6 pnpinfo vendor=0x1022 device=0x43f5 subvendor=0x1b21 subdevice=0x3328 class=0x060400 at slot=5 function=0 dbsf=pci0:3:5:0 handle=\_SB_.PCI0.GPP7.UP00.DP28 pcib3 bus numbers: 6 pci6 pcib6 bus numbers: 6 pcib7 pnpinfo vendor=0x1022 device=0x43f5 subvendor=0x1b21 subdevice=0x3328 class=0x060400 at slot=6 function=0 dbsf=pci0:3:6:0 handle=\_SB_.PCI0.GPP7.UP00.DP30 pcib3 bus numbers: 7 pcib3 memory window: 0xfc300000-0xfc4fffff pci7 pcib7 bus numbers: 7 unknown pnpinfo vendor=0x14c3 device=0x0616 subvendor=0x14c3 subdevice=0x0616 class=0x028000 at slot=0 function=0 dbsf=pci0:7:0:0 handle=\_SB_.PCI0.GPP7.UP00.DP30.EP00 pcib8 pnpinfo vendor=0x1022 device=0x43f5 subvendor=0x1b21 subdevice=0x3328 class=0x060400 at slot=7 function=0 dbsf=pci0:3:7:0 handle=\_SB_.PCI0.GPP7.UP00.DP38 pcib3 bus numbers: 8 pcib3 I/O port window: 0xd000-0xdfff pcib3 memory window: 0xfc700000-0xfc7fffff pci8 pcib8 bus numbers: 8 unknown pnpinfo vendor=0x10ec device=0x8125 subvendor=0x1849 subdevice=0x8125 class=0x020000 at slot=0 function=0 dbsf=pci0:8:0:0 handle=\_SB_.PCI0.GPP7.UP00.DP38.EP00 pcib8 I/O port window: 0xd000-0xd0ff pcib8 memory window: 0xfc700000-0xfc70ffff 0xfc710000-0xfc713fff pcib9 pnpinfo vendor=0x1022 device=0x43f5 subvendor=0x1b21 subdevice=0x3328 class=0x060400 at slot=8 function=0 dbsf=pci0:3:8:0 handle=\_SB_.PCI0.GPP7.UP00.DP40 pcib3 bus numbers: 9-18 pcib3 memory window: 0xfc000000-0xfc2fffff pci9 pcib9 bus numbers: 9 pcib10 pnpinfo vendor=0x1022 device=0x43f4 subvendor=0x1b21 subdevice=0x3328 class=0x060400 at slot=0 function=0 dbsf=pci0:9:0:0 handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00 pcib9 bus numbers: 10-18 pcib9 memory window: 0xfc000000-0xfc2fffff pci10 pcib10 bus numbers: 10 pcib11 pnpinfo vendor=0x1022 device=0x43f5 subvendor=0x1b21 subdevice=0x3328 class=0x060400 at slot=0 function=0 dbsf=pci0:10:0:0 handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP00 pcib10 bus numbers: 11 pcib10 memory window: 0xfc200000-0xfc2fffff pci11 pcib11 bus numbers: 11 nvme0 pnpinfo vendor=0x1987 device=0x5016 subvendor=0x1987 subdevice=0x5016 class=0x010802 at slot=0 function=0 dbsf=pci0:11:0:0 handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP00.NV00 Interrupt request lines: 0x5e 0x5f 0x60 0x61 0x62 0x63 0x64 0x65 0x66 pcib11 memory window: 0xfc200000-0xfc203fff pcib12 pnpinfo vendor=0x1022 device=0x43f5 subvendor=0x1b21 subdevice=0x3328 class=0x060400 at slot=4 function=0 dbsf=pci0:10:4:0 handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP20 pcib10 bus numbers: 12 pci12 pcib12 bus numbers: 12 pcib13 pnpinfo vendor=0x1022 device=0x43f5 subvendor=0x1b21 subdevice=0x3328 class=0x060400 at slot=5 function=0 dbsf=pci0:10:5:0 handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP28 pcib10 bus numbers: 13 pci13 pcib13 bus numbers: 13 pcib14 pnpinfo vendor=0x1022 device=0x43f5 subvendor=0x1b21 subdevice=0x3328 class=0x060400 at slot=6 function=0 dbsf=pci0:10:6:0 handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP30 pcib10 bus numbers: 14 pci14 pcib14 bus numbers: 14 pcib15 pnpinfo vendor=0x1022 device=0x43f5 subvendor=0x1b21 subdevice=0x3328 class=0x060400 at slot=7 function=0 dbsf=pci0:10:7:0 handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP38 pcib10 bus numbers: 15 pci15 pcib15 bus numbers: 15 pcib16 pnpinfo vendor=0x1022 device=0x43f5 subvendor=0x1b21 subdevice=0x3328 class=0x060400 at slot=8 function=0 dbsf=pci0:10:8:0 handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP40 pcib10 bus numbers: 16 pcib10 memory window: 0xfc100000-0xfc1fffff pci16 pcib16 bus numbers: 16 nvme1 pnpinfo vendor=0x1987 device=0x5016 subvendor=0x1987 subdevice=0x5016 class=0x010802 at slot=0 function=0 dbsf=pci0:16:0:0 handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP40.UP00 Interrupt request lines: 0x67 0x68 0x69 0x6a 0x6b 0x6c 0x6d 0x6e 0x6f pcib16 memory window: 0xfc100000-0xfc103fff pcib17 pnpinfo vendor=0x1022 device=0x43f5 subvendor=0x1b21 subdevice=0x3328 class=0x060400 at slot=12 function=0 dbsf=pci0:10:12:0 handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP60 pcib10 bus numbers: 17 pcib10 memory window: 0xfc000000-0xfc0fffff pci17 pcib17 bus numbers: 17 xhci0 pnpinfo vendor=0x1022 device=0x43f7 subvendor=0x1b21 subdevice=0x1142 class=0x0c0330 at slot=0 function=0 dbsf=pci0:17:0:0 handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP60.XH00 Interrupt request lines: 0x70 pcib17 memory window: 0xfc000000-0xfc007fff usbus0 uhub4 pcib18 pnpinfo vendor=0x1022 device=0x43f5 subvendor=0x1b21 subdevice=0x3328 class=0x060400 at slot=13 function=0 dbsf=pci0:10:13:0 handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP68 pcib10 bus numbers: 18 pci18 pcib18 bus numbers: 18 unknown pnpinfo vendor=0x1022 device=0x43f6 subvendor=0x1b21 subdevice=0x1062 class=0x010601 at slot=0 function=0 dbsf=pci0:18:0:0 handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP68.SA00 pcib19 pnpinfo vendor=0x1022 device=0x43f5 subvendor=0x1b21 subdevice=0x3328 class=0x060400 at slot=12 function=0 dbsf=pci0:3:12:0 handle=\_SB_.PCI0.GPP7.UP00.DP60 pcib3 bus numbers: 19 pcib3 memory window: 0xfc600000-0xfc6fffff pci19 pcib19 bus numbers: 19 xhci1 pnpinfo vendor=0x1022 device=0x43f7 subvendor=0x1b21 subdevice=0x1142 class=0x0c0330 at slot=0 function=0 dbsf=pci0:19:0:0 handle=\_SB_.PCI0.GPP7.UP00.DP60.XH00 Interrupt request lines: 0x71 pcib19 memory window: 0xfc600000-0xfc607fff usbus1 uhub3 ubt0 pnpinfo vendor=0x0e8d product=0x0616 devclass=0xef devsubclass=0x02 devproto=0x01 sernum="000000000" release=0x0100 mode=host intclass=0xe0 intsubclass=0x01 intprotocol=0x01 at bus=1 hubaddr=1 port=17 devaddr=3 interface=0 ugen=ugen1.3 pcib20 pnpinfo vendor=0x1022 device=0x43f5 subvendor=0x1b21 subdevice=0x3328 class=0x060400 at slot=13 function=0 dbsf=pci0:3:13:0 handle=\_SB_.PCI0.GPP7.UP00.DP68 pcib3 bus numbers: 20 pcib3 memory window: 0xfc500000-0xfc5fffff pci20 pcib20 bus numbers: 20 unknown pnpinfo vendor=0x1022 device=0x43f6 subvendor=0x1b21 subdevice=0x1062 class=0x010601 at slot=0 function=0 dbsf=pci0:20:0:0 handle=\_SB_.PCI0.GPP7.UP00.DP68.SA00 pcib20 memory window: 0xfc500000-0xfc5003ff pcib21 pnpinfo vendor=0x1022 device=0x14db subvendor=0x1022 subdevice=0x1453 class=0x060400 at slot=2 function=2 dbsf=pci0:0:2:2 handle=\_SB_.PCI0.GPP8 I/O memory addresses: 0xfce00000-0xfcefffff PCI domain 0 bus numbers: 21 pci21 pcib21 bus numbers: 21 nvme2 pnpinfo vendor=0x8086 device=0x2525 subvendor=0x8086 subdevice=0x380a class=0x010802 at slot=0 function=0 dbsf=pci0:21:0:0 Interrupt request lines: 0x72 0x73 0x74 0x75 0x76 0x77 0x78 0x79 0x7a pcib21 memory window: 0xfce00000-0xfce03fff hostb3 pnpinfo vendor=0x1022 device=0x14da subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=3 function=0 dbsf=pci0:0:3:0 handle=\_SB_.PCI0.D012 hostb4 pnpinfo vendor=0x1022 device=0x14da subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=4 function=0 dbsf=pci0:0:4:0 handle=\_SB_.PCI0.D021 hostb5 pnpinfo vendor=0x1022 device=0x14da subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=8 function=0 dbsf=pci0:0:8:0 handle=\_SB_.PCI0.D026 pcib22 pnpinfo vendor=0x1022 device=0x14dd subvendor=0x1022 subdevice=0x14dd class=0x060400 at slot=8 function=1 dbsf=pci0:0:8:1 handle=\_SB_.PCI0.GP17 I/O ports: 0xf000-0xffff I/O memory addresses: 0xfc900000-0xfccfffff 0xfce0000000-0xfcf01fffff PCI domain 0 bus numbers: 22 pci22 pcib22 bus numbers: 22 vgapci0 pnpinfo vendor=0x1002 device=0x164e subvendor=0x1002 subdevice=0x164e class=0x030000 at slot=0 function=0 dbsf=pci0:22:0:0 handle=\_SB_.PCI0.GP17.VGA_ pcib22 memory window: 0xfcc00000-0xfcc7ffff pcib22 prefetch window: 0xfce0000000-0xfcefffffff 0xfcf0000000-0xfcf01fffff drm0 drmn0 hdac0 pnpinfo vendor=0x1002 device=0x1640 subvendor=0x1002 subdevice=0x1640 class=0x040300 at slot=0 function=1 dbsf=pci0:22:0:1 handle=\_SB_.PCI0.GP17.D02B Interrupt request lines: 0x7b pcib22 memory window: 0xfcb00000-0xfcb03fff hdacc0 pnpinfo vendor=0x1002 device=0xaa01 revision=0x08 stepping=0x00 at cad=0 hdaa0 pnpinfo type=0x01 subsystem=0x00aa0100 at nid=1 pcm0 at nid=3 pcm1 at nid=5 pcm2 at nid=7 pcm3 at nid=9 unknown pnpinfo vendor=0x1022 device=0x1649 subvendor=0x1022 subdevice=0x1649 class=0x108000 at slot=0 function=2 dbsf=pci0:22:0:2 handle=\_SB_.PCI0.GP17.APSP xhci2 pnpinfo vendor=0x1022 device=0x15b6 subvendor=0x1849 subdevice=0x15b6 class=0x0c0330 at slot=0 function=3 dbsf=pci0:22:0:3 handle=\_SB_.PCI0.GP17.XHC0 Interrupt request lines: 0x7c pcib22 memory window: 0xfca00000-0xfcafffff usbus2 uhub1 xhci3 pnpinfo vendor=0x1022 device=0x15b7 subvendor=0x1849 subdevice=0x15b6 class=0x0c0330 at slot=0 function=4 dbsf=pci0:22:0:4 handle=\_SB_.PCI0.GP17.XHC1 Interrupt request lines: 0x7d pcib22 memory window: 0xfc900000-0xfc9fffff usbus3 uhub2 hdac1 pnpinfo vendor=0x1022 device=0x15e3 subvendor=0x1849 subdevice=0x222c class=0x040300 at slot=0 function=6 dbsf=pci0:22:0:6 handle=\_SB_.PCI0.GP17.AZAL Interrupt request lines: 0x7e pcib22 memory window: 0xfcb08000-0xfcb0ffff hdacc1 pnpinfo vendor=0x10ec device=0x1220 revision=0x01 stepping=0x01 at cad=0 hdaa1 pnpinfo type=0x01 subsystem=0x1849222c at nid=1 pcm4 at nid=20,24 pcm5 at nid=27,25 pcm6 at nid=30 pcib23 pnpinfo vendor=0x1022 device=0x14dd subvendor=0x1022 subdevice=0x14dd class=0x060400 at slot=8 function=3 dbsf=pci0:0:8:3 handle=\_SB_.PCI0.GP19 I/O memory addresses: 0xfcd00000-0xfcdfffff PCI domain 0 bus numbers: 23 pci23 pcib23 bus numbers: 23 xhci4 pnpinfo vendor=0x1022 device=0x15b8 subvendor=0x1849 subdevice=0x15b6 class=0x0c0330 at slot=0 function=0 dbsf=pci0:23:0:0 handle=\_SB_.PCI0.GP19.XHC2 Interrupt request lines: 0x7f pcib23 memory window: 0xfcd00000-0xfcdfffff usbus4 uhub0 uhid0 pnpinfo vendor=0x26ce product=0x01a2 devclass=0x00 devsubclass=0x00 devproto=0x00 sernum="A02019100900" release=0x0000 mode=host intclass=0x03 intsubclass=0x00 intprotocol=0x00 at bus=4 hubaddr=1 port=1 devaddr=2 interface=0 ugen=ugen4.2 unknown pnpinfo vendor=0x1022 device=0x790b subvendor=0x1849 subdevice=0x790b class=0x0c0500 at slot=20 function=0 dbsf=pci0:0:20:0 handle=\_SB_.PCI0.D032 isab0 pnpinfo vendor=0x1022 device=0x790e subvendor=0x1849 subdevice=0x790e class=0x060100 at slot=20 function=3 dbsf=pci0:0:20:3 handle=\_SB_.PCI0.SBRG isa0 sc0 vga0 atkbdc0 fdc0 ppc0 uart0 uart1 hostb6 pnpinfo vendor=0x1022 device=0x14e0 subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=24 function=0 dbsf=pci0:0:24:0 hostb7 pnpinfo vendor=0x1022 device=0x14e1 subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=24 function=1 dbsf=pci0:0:24:1 hostb8 pnpinfo vendor=0x1022 device=0x14e2 subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=24 function=2 dbsf=pci0:0:24:2 hostb9 pnpinfo vendor=0x1022 device=0x14e3 subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=24 function=3 dbsf=pci0:0:24:3 hostb10 pnpinfo vendor=0x1022 device=0x14e4 subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=24 function=4 dbsf=pci0:0:24:4 hostb11 pnpinfo vendor=0x1022 device=0x14e5 subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=24 function=5 dbsf=pci0:0:24:5 hostb12 pnpinfo vendor=0x1022 device=0x14e6 subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=24 function=6 dbsf=pci0:0:24:6 hostb13 pnpinfo vendor=0x1022 device=0x14e7 subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=24 function=7 dbsf=pci0:0:24:7 acpi_sysresource0 pnpinfo _HID=PNP0C01 _UID=200 _CID=none at handle=\_SB_.PCI0.AMDN acpi_sysresource1 pnpinfo _HID=PNP0C02 _UID=21 _CID=none at handle=\_SB_.PCI0.IOMA acpi_sysresource2 pnpinfo _HID=PNP0C02 _UID=20 _CID=none at handle=\_SB_.PCI0.GNBD.BROD unknown pnpinfo _HID=I2SC1002 _UID=1 _CID=AMD1234 at handle=\_SB_.PCI0.GP17.VGA_.I2SC (disabled) acpi_sysresource3 pnpinfo _HID=PNP0C02 _UID=0 _CID=none at handle=\_SB_.PCI0.GP17.APSP unknown pnpinfo _HID=PNP0000 _UID=0 _CID=none at handle=\_SB_.PCI0.SBRG.PIC_ I/O ports: 0x20-0x21 0xa0-0xa1 atdma0 pnpinfo _HID=PNP0200 _UID=0 _CID=none at handle=\_SB_.PCI0.SBRG.DMAD DMA request lines: 4 I/O ports: 0x0-0xf 0x81-0x83 0x87 0x89-0x8b 0x8f 0xc0-0xdf attimer0 pnpinfo _HID=PNP0100 _UID=0 _CID=none at handle=\_SB_.PCI0.SBRG.TMR_ Interrupt request lines: 0x0 I/O ports: 0x40-0x43 atrtc0 pnpinfo _HID=PNP0B00 _UID=0 _CID=none at handle=\_SB_.PCI0.SBRG.RTC0 Interrupt request lines: 0x8 I/O ports: 0x70-0x71 unknown pnpinfo _HID=PNP0800 _UID=0 _CID=none at handle=\_SB_.PCI0.SBRG.SPKR I/O ports: 0x61 acpi_sysresource4 pnpinfo _HID=PNP0C02 _UID=0 _CID=none at handle=\_SB_.PCI0.SBRG.SIO1 unknown pnpinfo _HID=PNP0C08 _UID=0 _CID=none at handle=\_SB_.PCI0.SBRG.HHMD (disabled) unknown pnpinfo _HID=PNP0C08 _UID=1 _CID=none at handle=\_SB_.PCI0.SBRG.SGPI (disabled) acpi_sysresource5 pnpinfo _HID=PNP0C02 _UID=1792 _CID=none at handle=\_SB_.PCI0.S900 unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP00.NV00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP08.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP08.EP00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP10.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP10.WN00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP18.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP18.LN00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP20.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP20.NV00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP28.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP28.EP00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP30.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP30.EP00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP38.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP38.EP00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP00.NV00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP08.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP08.EP00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP10.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP10.WN00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP18.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP18.LN00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP20.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP20.NV00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP28.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP28.EP00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP30.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP30.EP00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP38.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP38.EP00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP40.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP40.UP00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP48.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP48.EP00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP50.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP50.EP00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP58.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP58.EP00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP60.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP60.XH00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP68.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP68.SA00.PWRS unknown pnpinfo _HID=AMDIF031 _UID=2 _CID=AMDIF031 at handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP68.SPTO I/O memory addresses: 0xfbf00000-0xfbf00fff unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP48.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP48.EP00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP50.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP50.EP00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP58.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP58.EP00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP60.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP60.XH00.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP68.PWRS unknown pnpinfo _HID=none _UID=0 _CID=none at handle=\_SB_.PCI0.GPP7.UP00.DP68.SA00.PWRS unknown pnpinfo _HID=PNP0500 _UID=1 _CID=none at handle=\_SB_.PCI0.UAR1 (disabled) unknown pnpinfo _HID=PNP0500 _UID=2 _CID=none at handle=\_SB_.PCI0.UAR2 (disabled) unknown pnpinfo _HID=PNP0500 _UID=3 _CID=none at handle=\_SB_.PCI0.UAR3 (disabled) unknown pnpinfo _HID=PNP0500 _UID=4 _CID=none at handle=\_SB_.PCI0.UAR4 (disabled) acpi_button0 pnpinfo _HID=PNP0C0C _UID=170 _CID=none at handle=\_SB_.PWRB pci_link0 pnpinfo _HID=PNP0C0F _UID=1 _CID=none at handle=\_SB_.LNKA pci_link1 pnpinfo _HID=PNP0C0F _UID=2 _CID=none at handle=\_SB_.LNKB pci_link2 pnpinfo _HID=PNP0C0F _UID=3 _CID=none at handle=\_SB_.LNKC pci_link3 pnpinfo _HID=PNP0C0F _UID=4 _CID=none at handle=\_SB_.LNKD pci_link4 pnpinfo _HID=PNP0C0F _UID=5 _CID=none at handle=\_SB_.LNKE pci_link5 pnpinfo _HID=PNP0C0F _UID=6 _CID=none at handle=\_SB_.LNKF pci_link6 pnpinfo _HID=PNP0C0F _UID=7 _CID=none at handle=\_SB_.LNKG pci_link7 pnpinfo _HID=PNP0C0F _UID=8 _CID=none at handle=\_SB_.LNKH unknown pnpinfo _HID=AMDI0060 _UID=0 _CID=none at handle=\_SB_.HFP1 (disabled) unknown pnpinfo _HID=AMDI0063 _UID=0 _CID=none at handle=\_SB_.HID0 (disabled) unknown pnpinfo _HID=AMDI0030 _UID=0 _CID=AMDI0030 at handle=\_SB_.GPIO unknown pnpinfo _HID=AMDI0052 _UID=0 _CID=none at handle=\_SB_.PPKG unknown pnpinfo _HID=AMDI0020 _UID=0 _CID=none at handle=\_SB_.FUR0 (disabled) unknown pnpinfo _HID=AMDI0020 _UID=1 _CID=none at handle=\_SB_.FUR1 (disabled) unknown pnpinfo _HID=AMDI0020 _UID=2 _CID=none at handle=\_SB_.FUR2 (disabled) unknown pnpinfo _HID=AMDI0020 _UID=3 _CID=none at handle=\_SB_.FUR3 (disabled) unknown pnpinfo _HID=AMDI0020 _UID=4 _CID=none at handle=\_SB_.FUR4 (disabled) unknown pnpinfo _HID=AMDI0010 _UID=0 _CID=none at handle=\_SB_.I2CA (disabled) unknown pnpinfo _HID=AMDI0010 _UID=1 _CID=none at handle=\_SB_.I2CB (disabled) unknown pnpinfo _HID=AMDI0010 _UID=2 _CID=none at handle=\_SB_.I2CC (disabled) unknown pnpinfo _HID=AMDI0010 _UID=3 _CID=none at handle=\_SB_.I2CD (disabled) unknown pnpinfo _HID=AMDI0015 _UID=0 _CID=none at handle=\_SB_.I3CA (disabled) unknown pnpinfo _HID=AMDI0015 _UID=1 _CID=none at handle=\_SB_.I3CB (disabled) unknown pnpinfo _HID=AMDI0016 _UID=2 _CID=none at handle=\_SB_.I3CC (disabled) unknown pnpinfo _HID=AMDI0015 _UID=3 _CID=none at handle=\_SB_.I3CD (disabled) unknown pnpinfo _HID=MSFT0101 _UID=1 _CID=none at handle=\_SB_.TPM_ I/O memory addresses: 0x73454000-0x73457fff 0x73458000-0x7345bfff acpi_sysresource6 pnpinfo _HID=PNP0C02 _UID=139 _CID=none at handle=\_SB_.AWR0 acpi_sysresource7 pnpinfo _HID=PNP0C02 _UID=128 _CID=none at handle=\_SB_.AWR0.ABR0 acpi_sysresource8 pnpinfo _HID=PNP0C02 _UID=129 _CID=none at handle=\_SB_.AWR0.ABR1 acpi_sysresource9 pnpinfo _HID=PNP0C02 _UID=130 _CID=none at handle=\_SB_.AWR0.ABR2 acpi_sysresource10 pnpinfo _HID=PNP0C02 _UID=131 _CID=none at handle=\_SB_.AWR0.ABR3 acpi_sysresource11 pnpinfo _HID=PNP0C02 _UID=140 _CID=none at handle=\_SB_.AWR1 acpi_sysresource12 pnpinfo _HID=PNP0C02 _UID=132 _CID=none at handle=\_SB_.AWR1.ABR4 acpi_sysresource13 pnpinfo _HID=PNP0C02 _UID=133 _CID=none at handle=\_SB_.AWR1.ABR5 acpi_sysresource14 pnpinfo _HID=PNP0C02 _UID=134 _CID=none at handle=\_SB_.AWR1.ABR6 acpi_sysresource15 pnpinfo _HID=PNP0C02 _UID=135 _CID=none at handle=\_SB_.AWR1.ABR7 acpi_sysresource16 pnpinfo _HID=PNP0C02 _UID=136 _CID=none at handle=\_SB_.AWR1.ABR8 acpi_sysresource17 pnpinfo _HID=PNP0C02 _UID=137 _CID=none at handle=\_SB_.AWR1.ABR9 acpi_sysresource18 pnpinfo _HID=PNP0C02 _UID=138 _CID=none at handle=\_SB_.AWR1.ABRA acpi_syscontainer0 pnpinfo _HID=ACPI0010 _UID=1 _CID=PNP0A05 at handle=\_SB_.PLTF cpu0 pnpinfo _HID=ACPI0007 _UID=0 _CID=none at handle=\_SB_.PLTF.C000 I/O ports: 0x414 0x415 hwpstate0 acpi_perf0 cpufreq0 cpu1 pnpinfo _HID=ACPI0007 _UID=1 _CID=none at handle=\_SB_.PLTF.C001 I/O ports: 0x414 0x415 hwpstate1 acpi_perf1 cpu2 pnpinfo _HID=ACPI0007 _UID=2 _CID=none at handle=\_SB_.PLTF.C002 I/O ports: 0x414 0x415 hwpstate2 acpi_perf2 cpu3 pnpinfo _HID=ACPI0007 _UID=3 _CID=none at handle=\_SB_.PLTF.C003 I/O ports: 0x414 0x415 hwpstate3 acpi_perf3 cpu4 pnpinfo _HID=ACPI0007 _UID=4 _CID=none at handle=\_SB_.PLTF.C004 I/O ports: 0x414 0x415 hwpstate4 acpi_perf4 cpu5 pnpinfo _HID=ACPI0007 _UID=5 _CID=none at handle=\_SB_.PLTF.C005 I/O ports: 0x414 0x415 hwpstate5 acpi_perf5 cpu6 pnpinfo _HID=ACPI0007 _UID=6 _CID=none at handle=\_SB_.PLTF.C006 I/O ports: 0x414 0x415 hwpstate6 acpi_perf6 cpu7 pnpinfo _HID=ACPI0007 _UID=7 _CID=none at handle=\_SB_.PLTF.C007 I/O ports: 0x414 0x415 hwpstate7 acpi_perf7 cpu8 pnpinfo _HID=ACPI0007 _UID=8 _CID=none at handle=\_SB_.PLTF.C008 I/O ports: 0x414 0x415 hwpstate8 acpi_perf8 cpu9 pnpinfo _HID=ACPI0007 _UID=9 _CID=none at handle=\_SB_.PLTF.C009 I/O ports: 0x414 0x415 hwpstate9 acpi_perf9 cpu10 pnpinfo _HID=ACPI0007 _UID=10 _CID=none at handle=\_SB_.PLTF.C00A I/O ports: 0x414 0x415 hwpstate10 acpi_perf10 cpu11 pnpinfo _HID=ACPI0007 _UID=11 _CID=none at handle=\_SB_.PLTF.C00B I/O ports: 0x414 0x415 hwpstate11 acpi_perf11 cpu12 pnpinfo _HID=ACPI0007 _UID=12 _CID=none at handle=\_SB_.PLTF.C00C I/O ports: 0x414 0x415 hwpstate12 acpi_perf12 cpu13 pnpinfo _HID=ACPI0007 _UID=13 _CID=none at handle=\_SB_.PLTF.C00D I/O ports: 0x414 0x415 hwpstate13 acpi_perf13 cpu14 pnpinfo _HID=ACPI0007 _UID=14 _CID=none at handle=\_SB_.PLTF.C00E I/O ports: 0x414 0x415 hwpstate14 acpi_perf14 cpu15 pnpinfo _HID=ACPI0007 _UID=15 _CID=none at handle=\_SB_.PLTF.C00F I/O ports: 0x414 0x415 hwpstate15 acpi_perf15 cpu16 pnpinfo _HID=ACPI0007 _UID=16 _CID=none at handle=\_SB_.PLTF.C010 I/O ports: 0x414 0x415 hwpstate16 acpi_perf16 cpu17 pnpinfo _HID=ACPI0007 _UID=17 _CID=none at handle=\_SB_.PLTF.C011 I/O ports: 0x414 0x415 hwpstate17 acpi_perf17 cpu18 pnpinfo _HID=ACPI0007 _UID=18 _CID=none at handle=\_SB_.PLTF.C012 I/O ports: 0x414 0x415 hwpstate18 acpi_perf18 cpu19 pnpinfo _HID=ACPI0007 _UID=19 _CID=none at handle=\_SB_.PLTF.C013 I/O ports: 0x414 0x415 hwpstate19 acpi_perf19 cpu20 pnpinfo _HID=ACPI0007 _UID=20 _CID=none at handle=\_SB_.PLTF.C014 I/O ports: 0x414 0x415 hwpstate20 acpi_perf20 cpu21 pnpinfo _HID=ACPI0007 _UID=21 _CID=none at handle=\_SB_.PLTF.C015 I/O ports: 0x414 0x415 hwpstate21 acpi_perf21 cpu22 pnpinfo _HID=ACPI0007 _UID=22 _CID=none at handle=\_SB_.PLTF.C016 I/O ports: 0x414 0x415 hwpstate22 acpi_perf22 cpu23 pnpinfo _HID=ACPI0007 _UID=23 _CID=none at handle=\_SB_.PLTF.C017 I/O ports: 0x414 0x415 hwpstate23 acpi_perf23 cpu24 pnpinfo _HID=ACPI0007 _UID=24 _CID=none at handle=\_SB_.PLTF.C018 I/O ports: 0x414 0x415 hwpstate24 acpi_perf24 cpu25 pnpinfo _HID=ACPI0007 _UID=25 _CID=none at handle=\_SB_.PLTF.C019 I/O ports: 0x414 0x415 hwpstate25 acpi_perf25 cpu26 pnpinfo _HID=ACPI0007 _UID=26 _CID=none at handle=\_SB_.PLTF.C01A I/O ports: 0x414 0x415 hwpstate26 acpi_perf26 cpu27 pnpinfo _HID=ACPI0007 _UID=27 _CID=none at handle=\_SB_.PLTF.C01B I/O ports: 0x414 0x415 hwpstate27 acpi_perf27 cpu28 pnpinfo _HID=ACPI0007 _UID=28 _CID=none at handle=\_SB_.PLTF.C01C I/O ports: 0x414 0x415 hwpstate28 acpi_perf28 cpu29 pnpinfo _HID=ACPI0007 _UID=29 _CID=none at handle=\_SB_.PLTF.C01D I/O ports: 0x414 0x415 hwpstate29 acpi_perf29 cpu30 pnpinfo _HID=ACPI0007 _UID=30 _CID=none at handle=\_SB_.PLTF.C01E I/O ports: 0x414 0x415 hwpstate30 acpi_perf30 cpu31 pnpinfo _HID=ACPI0007 _UID=31 _CID=none at handle=\_SB_.PLTF.C01F I/O ports: 0x414 0x415 hwpstate31 acpi_perf31 unknown pnpinfo _HID=ACPI000C _UID=0 _CID=none at handle=\_SB_.APAD (disabled) unknown pnpinfo _HID=AMDIF031 _UID=0 _CID=AMDIF031 at handle=\_SB_.PTIO I/O memory addresses: 0xfec30000-0xfec30fff hpet0 pnpinfo _HID=PNP0103 _UID=0 _CID=none at handle=\HPET Interrupt request lines: 0x38 0x39 0x3a I/O memory addresses: 0xfed00000-0xfed003ff acpi_wmi0 pnpinfo _HID=PNP0C14 _UID=0 _CID=none at handle=\AOD_ acpi_timer0 pnpinfo unknown ACPI I/O ports: 0x808-0x80b root(33)au:~ #
Hmm, I think this device is the root cause of the conflict: handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP68.SPTO I/O memory addresses: 0xfbf00000-0xfbf00fff In particular, the ACPI bus driver is reserving that range on behalf of that device which falls in the range of pcib2's initial windows. However, this device is logically behind the PCI-PCI bridge, but we aren't recognizing it as such. This actually corresponds to a device behind this bridge: pcib18 pnpinfo vendor=0x1022 device=0x43f5 subvendor=0x1b21 subdevice=0x3328 class=0x060400 at slot=13 function=0 dbsf=pci0:10:13:0 handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP68 pcib10 bus numbers: 18 pci18 pcib18 bus numbers: 18 unknown pnpinfo vendor=0x1022 device=0x43f6 subvendor=0x1b21 subdevice=0x1062 class=0x010601 at slot=0 function=0 dbsf=pci0:18:0:0 handle=\_SB_.PCI0.GPP7.UP00.DP40.UP00.DP68.SA00 Note that DP68 is pcib18. I've no idea what the SPTO device is supposed to be under that bridge. But this does give me a bit of a clue for how to think about handling this. At some point it might be interesting to see the ACPI source from acpidump -d to see what it think the SPTO device is (e.g. if it has an _ADR method that indicates a PCI slot/function). I'll need to think a bit about how to properly ignore this device without breaking other devices we need to reserve resources for.
Created attachment 248276 [details] hack.patch This is a hack that should let you boot.
root(33)au:~ # acpidump -d iast exit status = 65280 RE: Note that DP68 is pcib18. I've no idea what the SPTO device is supposed to be under that bridge. If there is anything I can do to figure that out please let me know. I can get you photos of the board, run software, boot to another os, do some kind of process of elimination, whatever. RE: hack.patch I use ssd for the boot partition. If you are asking me to try the hack.patch to further a solution please let me know and I will get it done. Otherwise I will skip that because it doesn't affect my use case.
Testing the hack.patch might be good to confirm that my understanding is correct at least.
Created attachment 248321 [details] acpidump from Asus x670e system As requested.
Created attachment 248323 [details] acpidump from Asus x670e system As requested (hopefully with the correct file type this time).
Recent 14-STABLE with hack.patch booted fine with 1904 bios on my ProArt X670E-CREATOR WIFI Dumps you requested are too large to be attached directly, so here are links to github: https://raw.githubusercontent.com/olegsidorkin/misc/main/acpidump_d.txt https://raw.githubusercontent.com/olegsidorkin/misc/main/devinfo_rv.txt https://raw.githubusercontent.com/olegsidorkin/misc/main/devinfo_u.txt Thanks.
X670E Wifi Creator Pro with 1710 firmware. See https://gist.github.com/dch/dd74ddb1e5505d900ec87906974e6ec8 for dmesg, devinfo, dmidecode, acpidump from 15.0-CURRENT 0d3b2bdbf719 + hack.patch No SATA devices to test with, sorry.
SPTO device is something new. It wasn't in acpidump output from old BIOSes.
Thanks, I found the SBTO from one of the dumps. It looks to be some sort of GPIO controller. Excerpts: ``` Scope (\_SB.PCI0.GPP7.UP00.DP40) { Device (UP00) { ... Device (DP68) { Name (_ADR, 0x000D0000) // _ADR: Address ``` So this seems like it would be some other PCI device next to the AHCI controller, but it isn't showing up in the PCI probe. ``` Scope (\_SB.PCI0.GPP7.UP00.DP40.UP00.DP68) { Name (SPTS, 0x01) Name (TSGP, 0x0F) Device (SPTO) { Name (_HID, "AMDIF031") // _HID: Hardware ID Name (_CID, "AMDIF031") // _CID: Compatible ID Name (_UID, 0x02) // _UID: Unique ID Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (RBUF, ResourceTemplate () { Memory32Fixed (ReadWrite, 0xF4700000, // Address Base 0x00001000, // Address Length ) }) Return (RBUF) /* \_SB_.PCI0.GPP7.UP00.DP40.UP00.DP68.SPTO._CRS.R BUF */ } ``` This shows the _HID (which is a GPIO controller) and the conflicting resource. There are other references to GPIO pins from this device as well. I think I will probably take the approach in hack.patch and will post a candidate commit patch in a bit for folks to test.
Created attachment 248494 [details] 0001-acpi-Defer-reserving-resources-for-ACPI-devices.patch First attempt at a commit candidate
(In reply to John Baldwin from comment #41) It works for me. Thanks
Created attachment 248628 [details] dch dmesg after patch 0001-acpi-defer-reserving-resources-for-acpi-devices here's my dmesg after applying #248494 patch thanks. Box still runs fine so I hope that helps. I'll update my gist with acpidump etc accordingly at https://gist.github.com/dch/dd74ddb1e5505d900ec87906974e6ec8
A commit in branch main references this bug: URL: https://cgit.FreeBSD.org/src/commit/?id=f2fcb68074a51a8b399dc80d4c03fbe98a0ab92c commit f2fcb68074a51a8b399dc80d4c03fbe98a0ab92c Author: John Baldwin <jhb@FreeBSD.org> AuthorDate: 2024-02-22 18:43:43 +0000 Commit: John Baldwin <jhb@FreeBSD.org> CommitDate: 2024-02-22 18:43:43 +0000 acpi: Defer reserving resources for ACPI devices The goal of reserving firmware-assigned resources is to ensure that "wildcard" resource allocation requests will not claim an address range that is actually in use even if no attached driver is actively using that range. However, the current approach can break in some cases. In particular, ACPI can enumerate devices behind PCI bridges that don't show up in a normal PCI scan, but those device_t objects can end up as direct children of acpi0. Reserving resources for those devices directly from acpi0 ends up conflicting with later attempts to reserve the PCI bridge windows. As a workaround, defer reserving unclaimed resources until after the initial probe and attach scan. Eventually this pass of reserving unclaimed resources can be moved earlier, but it requires changes to other drivers in the tree to permit enumerating devices and reserving firmware-assigned resources in a depth-first traversal before attaching devices whose drivers request wildcard allocations. PR: 272507 Reported by: Justin Tocci <justin@tocci.org> Reported by: john@feith.com, many others Tested by: Oleg Sidorkin <osidorkin@gmail.com>, dch sys/dev/acpica/acpi.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-)
Thanks for fixing it. Is it going to be MFC'ed?
Sorry I hadn't seen this PR earlier when it was first reported. I am planning to MFC the fix today actually to try to get it into releng/13.3 to be included in the 13.3 release.
A commit in branch stable/14 references this bug: URL: https://cgit.FreeBSD.org/src/commit/?id=c76878c656e91aa595c2c81e86ac5adb59a15c98 commit c76878c656e91aa595c2c81e86ac5adb59a15c98 Author: John Baldwin <jhb@FreeBSD.org> AuthorDate: 2024-02-22 18:43:43 +0000 Commit: John Baldwin <jhb@FreeBSD.org> CommitDate: 2024-02-23 00:48:35 +0000 acpi: Defer reserving resources for ACPI devices The goal of reserving firmware-assigned resources is to ensure that "wildcard" resource allocation requests will not claim an address range that is actually in use even if no attached driver is actively using that range. However, the current approach can break in some cases. In particular, ACPI can enumerate devices behind PCI bridges that don't show up in a normal PCI scan, but those device_t objects can end up as direct children of acpi0. Reserving resources for those devices directly from acpi0 ends up conflicting with later attempts to reserve the PCI bridge windows. As a workaround, defer reserving unclaimed resources until after the initial probe and attach scan. Eventually this pass of reserving unclaimed resources can be moved earlier, but it requires changes to other drivers in the tree to permit enumerating devices and reserving firmware-assigned resources in a depth-first traversal before attaching devices whose drivers request wildcard allocations. PR: 272507 Reported by: Justin Tocci <justin@tocci.org> Reported by: john@feith.com, many others Tested by: Oleg Sidorkin <osidorkin@gmail.com>, dch (cherry picked from commit f2fcb68074a51a8b399dc80d4c03fbe98a0ab92c) sys/dev/acpica/acpi.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-)
A commit in branch stable/13 references this bug: URL: https://cgit.FreeBSD.org/src/commit/?id=eaa51e59e560c556d0a8273d29eea4309e6b6a4f commit eaa51e59e560c556d0a8273d29eea4309e6b6a4f Author: John Baldwin <jhb@FreeBSD.org> AuthorDate: 2024-02-22 18:43:43 +0000 Commit: John Baldwin <jhb@FreeBSD.org> CommitDate: 2024-02-23 00:48:39 +0000 acpi: Defer reserving resources for ACPI devices The goal of reserving firmware-assigned resources is to ensure that "wildcard" resource allocation requests will not claim an address range that is actually in use even if no attached driver is actively using that range. However, the current approach can break in some cases. In particular, ACPI can enumerate devices behind PCI bridges that don't show up in a normal PCI scan, but those device_t objects can end up as direct children of acpi0. Reserving resources for those devices directly from acpi0 ends up conflicting with later attempts to reserve the PCI bridge windows. As a workaround, defer reserving unclaimed resources until after the initial probe and attach scan. Eventually this pass of reserving unclaimed resources can be moved earlier, but it requires changes to other drivers in the tree to permit enumerating devices and reserving firmware-assigned resources in a depth-first traversal before attaching devices whose drivers request wildcard allocations. PR: 272507 Reported by: Justin Tocci <justin@tocci.org> Reported by: john@feith.com, many others Tested by: Oleg Sidorkin <osidorkin@gmail.com>, dch (cherry picked from commit f2fcb68074a51a8b399dc80d4c03fbe98a0ab92c) sys/dev/acpica/acpi.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-)
A commit in branch releng/13.3 references this bug: URL: https://cgit.FreeBSD.org/src/commit/?id=f15ff67ef9379e2fe4909c96fb8e4153c32bafe1 commit f15ff67ef9379e2fe4909c96fb8e4153c32bafe1 Author: John Baldwin <jhb@FreeBSD.org> AuthorDate: 2024-02-22 18:43:43 +0000 Commit: John Baldwin <jhb@FreeBSD.org> CommitDate: 2024-02-23 05:23:38 +0000 acpi: Defer reserving resources for ACPI devices The goal of reserving firmware-assigned resources is to ensure that "wildcard" resource allocation requests will not claim an address range that is actually in use even if no attached driver is actively using that range. However, the current approach can break in some cases. In particular, ACPI can enumerate devices behind PCI bridges that don't show up in a normal PCI scan, but those device_t objects can end up as direct children of acpi0. Reserving resources for those devices directly from acpi0 ends up conflicting with later attempts to reserve the PCI bridge windows. As a workaround, defer reserving unclaimed resources until after the initial probe and attach scan. Eventually this pass of reserving unclaimed resources can be moved earlier, but it requires changes to other drivers in the tree to permit enumerating devices and reserving firmware-assigned resources in a depth-first traversal before attaching devices whose drivers request wildcard allocations. PR: 272507 Reported by: Justin Tocci <justin@tocci.org> Reported by: john@feith.com, many others Tested by: Oleg Sidorkin <osidorkin@gmail.com>, dch (cherry picked from commit f2fcb68074a51a8b399dc80d4c03fbe98a0ab92c) (cherry picked from commit eaa51e59e560c556d0a8273d29eea4309e6b6a4f) Approved by: re (cperciva) sys/dev/acpica/acpi.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-)
It would be helpful if someone with an affected machine can boot 13.3-RC1 when it is released and verify that it works ok.
Works for me using a 13-stable checkout from last night ... my two SATA optical drives now show up.
Frame.work 16 (Ryzen 9 7940HS) booting 13.3 RC1 I cannot capture all of the dmesgs as the machine appears to be totally locked up when it stops. If I can provide more/better information please let me know. Below is a quick text capture from a photo of the end of the frozen output, if it helps. (I think I corrected all of my typos). cpu10: <ACPI CPU> on acpi0 cpu11: <ACPI CPU> on acpi0 cpu12: <ACPI CPU> on acpi0 cpu13: <ACP| CPU> on acpi0 cpu14: <ACPI CPU> on acp10 cpu15: <ACPI CPU> on acpi0 acpi_acad0: <AC Adapter> on acpi0 AcpiOsExecute: task queue not started battery0: <ACPI Control Method Battery> on acpi0 AcpiOsExecute: task queue not started acpi_lid0: ‹Control Method Lid Switch> on acpi0 ACPI: Enabled 1 GPEs in block 00 to 1F ahc_isa_identify 0: ioport OxcOB alloc failed ahc_isa_identify 1: ioport 0x1c00 alloc failed ahc_isa_identify 2: ioport 0x2c00 alloc failed ahc_isa_identify 3: ioport 0x3c00 alloc failed ahc_isa_identify 4: ioport 0x4c00 alloc failed ahc_isa_identify 5: ioport 0x5c00 alloc failed ahc_isa_identify 6: ioport 0x6c00 alloc failed ahc_isa_identify 7: ioport 0x7c00 alloc failed ahc_isa_identify 8: ioport 0x8c00 alloc failed ahc_isa_identify 9: ioport 8x9c00 alloc failed isa_probe_children: disabling PnP devices atrtc: atrtc0 already exists: skipping it attimer: attimer0 already exists; skipping it sc: sc0 already exists: skipping it isa_probe_children: probing non-PnP devices sc0 failed to probe on isa1 vga0 failed to probe on isa0 atkbdc0: AT keyboard controller not found atkbdc0 failed to probe at port 0x60,0x64 on isa0 fdc0 failed to probe at port 83f0-axafS,x3f7 irg 6 drq 2 on isa0 ppc0: cannot reserve 1/0 port range ppc0 failed to probe at irq 7 on isa0 At which point it is frozen
I downloaded FreeBSD-13.3-RC1-amd64-dvd1.iso to Windows in order to burn a DVD for testing and ran into some problems (unrelate to this bug). Attempting to use Nero Burning ROM 22.0.1016 to burn the image resulted in: There is not enough space to burn this compilation onto this disc. ... Data to be written: 4,624 MB (4,849,006,592 bytes) Space available: 4,482 MB (4,700,372,992 bytes) This ocurred using Verbatim 4.7GB DVD+RW media as well as Verbatim 4.7GB DVD+R media. I finally ended up using Verbatim 8.5GB DVD+R DL media. It seems like the ISO images need to be slightly smaller. The good news is that an UEFI boot off of the 8.5 DVD to single user worked fine with my hardware ... both the NVMe as well as the SATA optical drives showed up in the dmesg as well as there being /dev/cdX devices nodes.
(In reply to john from comment #53) Use USB: *-memstick.img* I'm using *.iso for install in VMs only. On baremetal using *.img on USB only. At least a decade.
The test was booting from a DVD, not a USB ... particularly of interest since this bug resulted in my SATA optical drives not being visible to FreeBSD.
(In reply to Gerry from comment #52) If this is a regression from the previous 13.3 beta, can you please boot the previous beta and get the results of 'devinfo -u' and 'devinfo -rv'?
I have the same problem on FreeBSD14-p5 (RELEASE). What's interesting it worked before changing the nvme speed from x2 to x4 (and so just 2 of the 4 sata port's can be used). And as already mentioned the 2 sata devices are shown in the bios and also in windows but not in FreeBSD. TUF GAMING X670E-PLUS WIFI (Bios ver.2413)
(In reply to nix23 from comment #57) AFAIK, this fix wasn't merged to 14-RELEASE, only to stable/14, so it will be released with 14.1
Planned on 18 June 2024: https://www.freebsd.org/releases/14.1R/schedule/ But if it is important enough, then we can try to convince the developers to make EN. I don't know the procedure.
EN = Errata Notices: https://www.freebsd.org/security/notices/
(In reply to Vladimir Druzenko from comment #59) Thank you everyone for helping to fix that. To patch 14.0-RELEASE (EN), would be veryvery helpful for me, so i can make updated installer images and install FBSD on those "not detected" sata drives.
(In reply to nix23 from comment #61) 1st step is to fill template https://www.freebsd.org/security/errata-template.txt and attach to this PR.
Created attachment 249374 [details] Errata Template partially filled to add EN to 14.0 I did what I could. Someone will need to complete or give me more instructions. It would appear that there are others in addition to me that would benefit from this patch being made to FreeBSD 14.
Note that the project generally does not spin new release images for an EN. Instead binary updates are provided via freebsd-update(8) and pkg(8). Thus, an EN wouldn't do you any good here. I don't think we are likely to get new installer images for 14.0 soon, but the release cycle for 14.1 is starting "soon": https://www.freebsd.org/releases/14.1R/schedule/ I would suggest using a 14-stable snapshot for now until 14.1 is released: https://download.freebsd.org/snapshots/amd64/amd64/ISO-IMAGES/14.0/
(In reply to John Baldwin from comment #64) True but i can make my "own" updated installer-image, however i think for stuff like that, updated official-installers for RELEASE would make sense.
Confirmed, with 14.0-STABLE it's working i can see the two SATA-Disk. But i would really like to see a update (EN) for 14.0-RELEASE. Thank you Justin Tocci for preparing the Errata Notice.
(In reply to John Baldwin from comment #56) Thanks for the reply John, and I am very sorry for the delay in responding. My issue isn't a regression, it is a new install on a newly released (Feb 2024) motherboard. Someone in another forum suggested I try the release here and see if it allowed the install but it didn't, so my problem was probably not directly related to the bug you were addressing. Thank you very much for the reply! I'll keep digging.
Any updates?